public inbox for linux-acpi@vger.kernel.org
 help / color / mirror / Atom feed
From: "Rafael J. Wysocki" <rjw-LthD3rsA81gm4RdzfppkhA@public.gmane.org>
To: Linux Kernel Mailing List
	<linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org>,
	Grant Likely
	<grant.likely-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org>
Cc: Arnd Bergmann <arnd-r2nGTMty4D4@public.gmane.org>,
	ACPI Devel Maling List
	<linux-acpi-u79uwXL29TY76Z2rM5mHXA@public.gmane.org>,
	Greg Kroah-Hartman
	<gregkh-hQyY1W1yCW8ekmWlsbkhG0B+6BGkLq7r@public.gmane.org>,
	Darren Hart <darren.hart-ral2JQCrhuEAvxtiuMwx3w@public.gmane.org>,
	Mika Westerberg
	<mika.westerberg-VuQAYsv1563Yd54FQh9/CA@public.gmane.org>,
	Aaron Lu <aaron.lu-ral2JQCrhuEAvxtiuMwx3w@public.gmane.org>,
	devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
	Linus Walleij
	<linus.walleij-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org>,
	Alexandre Courbot
	<gnurou-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>,
	Dmitry Torokhov
	<dmitry.torokhov-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>,
	Bryan Wu <cooloney-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
Subject: [Update][PATCH v6 02/12] Driver core: Unified device properties interface for platform firmware
Date: Tue, 04 Nov 2014 17:38:13 +0100	[thread overview]
Message-ID: <2077334.u2YofzPq8Z@vostro.rjw.lan> (raw)
In-Reply-To: <2127128.VT1Iq03xz1-sKB8Sp2ER+y1GS7QM15AGw@public.gmane.org>

From: "Rafael J. Wysocki" <rafael.j.wysocki-ral2JQCrhuEAvxtiuMwx3w@public.gmane.org>

Add a uniform interface by which device drivers can request device
properties from the platform firmware by providing a property name
and the corresponding data type.  The purpose of it is to help to
write portable code that won't depend on any particular platform
firmware interface.

The following general helper functions are added:

device_property_present()
device_property_read_u8()
device_property_read_u16()
device_property_read_u32()
device_property_read_u64()
device_property_read_string()
device_property_read_u8_array()
device_property_read_u16_array()
device_property_read_u32_array()
device_property_read_u64_array()
device_property_read_string_array()

The first one allows the caller to check if the given property is
present.  The next 5 of them allow single-valued properties of
various types to be retrieved in a uniform way.  The remaining 5 are
for reading properties with multiple values (arrays of either numbers
or strings).

The interface covers both ACPI and Device Trees.

This change set includes material from Mika Westerberg and Aaron Lu.

Signed-off-by: Aaron Lu <aaron.lu-ral2JQCrhuEAvxtiuMwx3w@public.gmane.org>
Signed-off-by: Mika Westerberg <mika.westerberg-VuQAYsv1563Yd54FQh9/CA@public.gmane.org>
Acked-by: Greg Kroah-Hartman <gregkh-hQyY1W1yCW8ekmWlsbkhG0B+6BGkLq7r@public.gmane.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki-ral2JQCrhuEAvxtiuMwx3w@public.gmane.org>
---

This has been rebased on top of

	http://marc.info/?l=linux-kernel&m=141505792126265&w=4

(with the const bug fixed).

Grant, I've also made the other changes suggested by you.

Now, this *really* needs to stabilize, so I'd very much prefer to do any
subsequent fix-ups on top of this series rather than by modifying the
patches in it.

Rafael

---
 drivers/acpi/property.c  |  178 +++++++++++++++++++++++++++++++++++++++++++++
 drivers/base/Makefile    |    2 
 drivers/base/property.c  |  185 +++++++++++++++++++++++++++++++++++++++++++++++
 drivers/of/base.c        |   33 ++++++++
 include/linux/acpi.h     |   32 ++++++++
 include/linux/of.h       |   12 +++
 include/linux/property.h |   73 ++++++++++++++++++
 7 files changed, 514 insertions(+), 1 deletion(-)
 create mode 100644 drivers/base/property.c
 create mode 100644 include/linux/property.h

Index: linux-pm/include/linux/property.h
===================================================================
--- /dev/null
+++ linux-pm/include/linux/property.h
@@ -0,0 +1,73 @@
+/*
+ * property.h - Unified device property interface.
+ *
+ * Copyright (C) 2014, Intel Corporation
+ * Authors: Rafael J. Wysocki <rafael.j.wysocki-ral2JQCrhuEAvxtiuMwx3w@public.gmane.org>
+ *          Mika Westerberg <mika.westerberg-VuQAYsv1563Yd54FQh9/CA@public.gmane.org>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef _LINUX_PROPERTY_H_
+#define _LINUX_PROPERTY_H_
+
+#include <linux/types.h>
+
+struct device;
+
+enum dev_prop_type {
+	DEV_PROP_U8,
+	DEV_PROP_U16,
+	DEV_PROP_U32,
+	DEV_PROP_U64,
+	DEV_PROP_STRING,
+	DEV_PROP_MAX,
+};
+
+bool device_property_present(struct device *dev, const char *propname);
+int device_property_read_u8_array(struct device *dev, const char *propname,
+				  u8 *val, size_t nval);
+int device_property_read_u16_array(struct device *dev, const char *propname,
+				   u16 *val, size_t nval);
+int device_property_read_u32_array(struct device *dev, const char *propname,
+				   u32 *val, size_t nval);
+int device_property_read_u64_array(struct device *dev, const char *propname,
+				   u64 *val, size_t nval);
+int device_property_read_string_array(struct device *dev, const char *propname,
+				      const char **val, size_t nval);
+int device_property_read_string(struct device *dev, const char *propname,
+				const char **val);
+
+static inline bool device_property_read_bool(struct device *dev,
+					     const char *propname)
+{
+	return device_property_present(dev, propname);
+}
+
+static inline int device_property_read_u8(struct device *dev,
+					  const char *propname, u8 *val)
+{
+	return device_property_read_u8_array(dev, propname, val, 1);
+}
+
+static inline int device_property_read_u16(struct device *dev,
+					   const char *propname, u16 *val)
+{
+	return device_property_read_u16_array(dev, propname, val, 1);
+}
+
+static inline int device_property_read_u32(struct device *dev,
+					   const char *propname, u32 *val)
+{
+	return device_property_read_u32_array(dev, propname, val, 1);
+}
+
+static inline int device_property_read_u64(struct device *dev,
+					   const char *propname, u64 *val)
+{
+	return device_property_read_u64_array(dev, propname, val, 1);
+}
+
+#endif /* _LINUX_PROPERTY_H_ */
Index: linux-pm/include/linux/of.h
===================================================================
--- linux-pm.orig/include/linux/of.h
+++ linux-pm/include/linux/of.h
@@ -23,6 +23,7 @@
 #include <linux/spinlock.h>
 #include <linux/topology.h>
 #include <linux/notifier.h>
+#include <linux/property.h>
 
 #include <asm/byteorder.h>
 #include <asm/errno.h>
@@ -263,6 +264,10 @@ extern int of_property_read_u32_array(co
 				      size_t sz);
 extern int of_property_read_u64(const struct device_node *np,
 				const char *propname, u64 *out_value);
+extern int of_property_read_u64_array(const struct device_node *np,
+				      const char *propname,
+				      u64 *out_values,
+				      size_t sz);
 
 extern int of_property_read_string(struct device_node *np,
 				   const char *propname,
@@ -476,6 +481,13 @@ static inline int of_property_read_u32_a
 {
 	return -ENOSYS;
 }
+
+static inline int of_property_read_u64_array(const struct device_node *np,
+					     const char *propname,
+					     u64 *out_values, size_t sz)
+{
+	return -ENOSYS;
+}
 
 static inline int of_property_read_string(struct device_node *np,
 					  const char *propname,
Index: linux-pm/include/linux/acpi.h
===================================================================
--- linux-pm.orig/include/linux/acpi.h
+++ linux-pm/include/linux/acpi.h
@@ -28,6 +28,7 @@
 #include <linux/errno.h>
 #include <linux/ioport.h>	/* for struct resource */
 #include <linux/device.h>
+#include <linux/property.h>
 
 #ifndef _LINUX
 #define _LINUX
@@ -677,6 +678,13 @@ int acpi_dev_get_property_array(struct a
 int acpi_dev_get_property_reference(struct acpi_device *adev, const char *name,
 				    const char *cells_name, size_t index,
 				    struct acpi_reference_args *args);
+
+int acpi_dev_prop_get(struct acpi_device *adev, const char *propname,
+		      void **valptr);
+int acpi_dev_prop_read_single(struct acpi_device *adev, const char *propname,
+			      enum dev_prop_type proptype, void *val);
+int acpi_dev_prop_read(struct acpi_device *adev, const char *propname,
+		       enum dev_prop_type proptype, void *val, size_t nval);
 #else
 static inline int acpi_dev_get_property(struct acpi_device *adev,
 					const char *name, acpi_object_type type,
@@ -697,6 +705,30 @@ static inline int acpi_dev_get_property_
 {
 	return -ENXIO;
 }
+
+static inline int acpi_dev_prop_get(struct acpi_device *adev,
+				    const char *propname,
+				    void **valptr)
+{
+	return -ENXIO;
+}
+
+static inline int acpi_dev_prop_read_single(struct acpi_device *adev,
+					    const char *propname,
+					    enum dev_prop_type proptype,
+					    void *val)
+{
+	return -ENXIO;
+}
+
+static inline int acpi_dev_prop_read(struct acpi_device *adev,
+				     const char *propname,
+				     enum dev_prop_type proptype,
+				     void *val, size_t nval)
+{
+	return -ENXIO;
+}
+
 #endif
 
 #endif	/*_LINUX_ACPI_H*/
Index: linux-pm/drivers/base/Makefile
===================================================================
--- linux-pm.orig/drivers/base/Makefile
+++ linux-pm/drivers/base/Makefile
@@ -4,7 +4,7 @@ obj-y			:= component.o core.o bus.o dd.o
 			   driver.o class.o platform.o \
 			   cpu.o firmware.o init.o map.o devres.o \
 			   attribute_container.o transport_class.o \
-			   topology.o container.o
+			   topology.o container.o property.o
 obj-$(CONFIG_DEVTMPFS)	+= devtmpfs.o
 obj-$(CONFIG_DMA_CMA) += dma-contiguous.o
 obj-y			+= power/
Index: linux-pm/drivers/base/property.c
===================================================================
--- /dev/null
+++ linux-pm/drivers/base/property.c
@@ -0,0 +1,185 @@
+/*
+ * property.c - Unified device property interface.
+ *
+ * Copyright (C) 2014, Intel Corporation
+ * Authors: Rafael J. Wysocki <rafael.j.wysocki-ral2JQCrhuEAvxtiuMwx3w@public.gmane.org>
+ *          Mika Westerberg <mika.westerberg-VuQAYsv1563Yd54FQh9/CA@public.gmane.org>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/property.h>
+#include <linux/export.h>
+#include <linux/acpi.h>
+#include <linux/of.h>
+
+/**
+ * device_property_present - check if a property of a device is present
+ * @dev: Device whose property is being checked
+ * @propname: Name of the property
+ *
+ * Check if property @propname is present in the device firmware description.
+ */
+bool device_property_present(struct device *dev, const char *propname)
+{
+	if (IS_ENABLED(CONFIG_OF) && dev->of_node)
+		return of_property_read_bool(dev->of_node, propname);
+
+	return !acpi_dev_prop_get(ACPI_COMPANION(dev), propname, NULL);
+}
+EXPORT_SYMBOL_GPL(device_property_present);
+
+#define OF_DEV_PROP_READ_ARRAY(node, propname, type, val, nval) \
+	(val) ? of_property_read_##type##_array((node), (propname), (val), (nval)) \
+	      : of_property_count_elems_of_size((node), (propname), sizeof(type))
+
+#define DEV_PROP_READ_ARRAY(_dev_, _propname_, _type_, _proptype_, _val_, _nval_) \
+	IS_ENABLED(CONFIG_OF) && _dev_->of_node ? \
+		(OF_DEV_PROP_READ_ARRAY(_dev_->of_node, _propname_, _type_, \
+					_val_, _nval_)) : \
+		acpi_dev_prop_read(ACPI_COMPANION(_dev_), _propname_, \
+				   _proptype_, _val_, _nval_)
+
+/**
+ * device_property_read_u8_array - return a u8 array property of a device
+ * @dev: Device to get the property of
+ * @propname: Name of the property
+ * @val: The values are stored here
+ * @nval: Size of the @val array
+ *
+ * Function reads an array of u8 properties with @propname from the device
+ * firmware description and stores them to @val if found.
+ *
+ * Return: %0 if the property was found (success),
+ *	   %-EINVAL if given arguments are not valid,
+ *	   %-ENODATA if the property does not have a value,
+ *	   %-EPROTO if the property is not an array of numbers,
+ *	   %-EOVERFLOW if the size of the property is not as expected.
+ */
+int device_property_read_u8_array(struct device *dev, const char *propname,
+				  u8 *val, size_t nval)
+{
+	return DEV_PROP_READ_ARRAY(dev, propname, u8, DEV_PROP_U8, val, nval);
+}
+EXPORT_SYMBOL_GPL(device_property_read_u8_array);
+
+/**
+ * device_property_read_u16_array - return a u16 array property of a device
+ * @dev: Device to get the property of
+ * @propname: Name of the property
+ * @val: The values are stored here
+ * @nval: Size of the @val array
+ *
+ * Function reads an array of u16 properties with @propname from the device
+ * firmware description and stores them to @val if found.
+ *
+ * Return: %0 if the property was found (success),
+ *	   %-EINVAL if given arguments are not valid,
+ *	   %-ENODATA if the property does not have a value,
+ *	   %-EPROTO if the property is not an array of numbers,
+ *	   %-EOVERFLOW if the size of the property is not as expected.
+ */
+int device_property_read_u16_array(struct device *dev, const char *propname,
+				   u16 *val, size_t nval)
+{
+	return DEV_PROP_READ_ARRAY(dev, propname, u16, DEV_PROP_U16, val, nval);
+}
+EXPORT_SYMBOL_GPL(device_property_read_u16_array);
+
+/**
+ * device_property_read_u32_array - return a u32 array property of a device
+ * @dev: Device to get the property of
+ * @propname: Name of the property
+ * @val: The values are stored here
+ * @nval: Size of the @val array
+ *
+ * Function reads an array of u32 properties with @propname from the device
+ * firmware description and stores them to @val if found.
+ *
+ * Return: %0 if the property was found (success),
+ *	   %-EINVAL if given arguments are not valid,
+ *	   %-ENODATA if the property does not have a value,
+ *	   %-EPROTO if the property is not an array of numbers,
+ *	   %-EOVERFLOW if the size of the property is not as expected.
+ */
+int device_property_read_u32_array(struct device *dev, const char *propname,
+				   u32 *val, size_t nval)
+{
+	return DEV_PROP_READ_ARRAY(dev, propname, u32, DEV_PROP_U32, val, nval);
+}
+EXPORT_SYMBOL_GPL(device_property_read_u32_array);
+
+/**
+ * device_property_read_u64_array - return a u64 array property of a device
+ * @dev: Device to get the property of
+ * @propname: Name of the property
+ * @val: The values are stored here
+ * @nval: Size of the @val array
+ *
+ * Function reads an array of u64 properties with @propname from the device
+ * firmware description and stores them to @val if found.
+ *
+ * Return: %0 if the property was found (success),
+ *	   %-EINVAL if given arguments are not valid,
+ *	   %-ENODATA if the property does not have a value,
+ *	   %-EPROTO if the property is not an array of numbers,
+ *	   %-EOVERFLOW if the size of the property is not as expected.
+ */
+int device_property_read_u64_array(struct device *dev, const char *propname,
+				   u64 *val, size_t nval)
+{
+	return DEV_PROP_READ_ARRAY(dev, propname, u64, DEV_PROP_U64, val, nval);
+}
+EXPORT_SYMBOL_GPL(device_property_read_u64_array);
+
+/**
+ * device_property_read_string_array - return a string array property of device
+ * @dev: Device to get the property of
+ * @propname: Name of the property
+ * @val: The values are stored here
+ * @nval: Size of the @val array
+ *
+ * Function reads an array of string properties with @propname from the device
+ * firmware description and stores them to @val if found.
+ *
+ * Return: %0 if the property was found (success),
+ *	   %-EINVAL if given arguments are not valid,
+ *	   %-ENODATA if the property does not have a value,
+ *	   %-EPROTO or %-EILSEQ if the property is not an array of strings,
+ *	   %-EOVERFLOW if the size of the property is not as expected.
+ */
+int device_property_read_string_array(struct device *dev, const char *propname,
+				      const char **val, size_t nval)
+{
+	return IS_ENABLED(CONFIG_OF) && dev->of_node ?
+		of_property_read_string_array(dev->of_node, propname, val, nval) :
+		acpi_dev_prop_read(ACPI_COMPANION(dev), propname,
+				   DEV_PROP_STRING, val, nval);
+}
+EXPORT_SYMBOL_GPL(device_property_read_string_array);
+
+/**
+ * device_property_read_string - return a string property of a device
+ * @dev: Device to get the property of
+ * @propname: Name of the property
+ * @val: The value is stored here
+ *
+ * Function reads property @propname from the device firmware description and
+ * stores the value into @val if found. The value is checked to be a string.
+ *
+ * Return: %0 if the property was found (success),
+ *	   %-EINVAL if given arguments are not valid,
+ *	   %-ENODATA if the property does not have a value,
+ *	   %-EPROTO or %-EILSEQ if the property type is not a string.
+ */
+int device_property_read_string(struct device *dev, const char *propname,
+				const char **val)
+{
+	return IS_ENABLED(CONFIG_OF) && dev->of_node ?
+		of_property_read_string(dev->of_node, propname, val) :
+		acpi_dev_prop_read(ACPI_COMPANION(dev), propname,
+				   DEV_PROP_STRING, val, 1);
+}
+EXPORT_SYMBOL_GPL(device_property_read_string);
Index: linux-pm/drivers/of/base.c
===================================================================
--- linux-pm.orig/drivers/of/base.c
+++ linux-pm/drivers/of/base.c
@@ -1250,6 +1250,39 @@ int of_property_read_u64(const struct de
 EXPORT_SYMBOL_GPL(of_property_read_u64);
 
 /**
+ * of_property_read_u64_array - Find and read an array of 64 bit integers
+ * from a property.
+ *
+ * @np:		device node from which the property value is to be read.
+ * @propname:	name of the property to be searched.
+ * @out_values:	pointer to return value, modified only if return value is 0.
+ * @sz:		number of array elements to read
+ *
+ * Search for a property in a device node and read 64-bit value(s) from
+ * it. Returns 0 on success, -EINVAL if the property does not exist,
+ * -ENODATA if property does not have a value, and -EOVERFLOW if the
+ * property data isn't large enough.
+ *
+ * The out_values is modified only if a valid u64 value can be decoded.
+ */
+int of_property_read_u64_array(const struct device_node *np,
+			       const char *propname, u64 *out_values,
+			       size_t sz)
+{
+	const __be32 *val = of_find_property_value_of_size(np, propname,
+						(sz * sizeof(*out_values)));
+
+	if (IS_ERR(val))
+		return PTR_ERR(val);
+
+	while (sz--) {
+		*out_values++ = of_read_number(val, 2);
+		val += 2;
+	}
+	return 0;
+}
+
+/**
  * of_property_read_string - Find and read a string from a property
  * @np:		device node from which the property value is to be read.
  * @propname:	name of the property to be searched.
Index: linux-pm/drivers/acpi/property.c
===================================================================
--- linux-pm.orig/drivers/acpi/property.c
+++ linux-pm/drivers/acpi/property.c
@@ -362,3 +362,181 @@ int acpi_dev_get_property_reference(stru
 	return -EPROTO;
 }
 EXPORT_SYMBOL_GPL(acpi_dev_get_property_reference);
+
+int acpi_dev_prop_get(struct acpi_device *adev, const char *propname,
+		      void **valptr)
+{
+	return acpi_dev_get_property(adev, propname, ACPI_TYPE_ANY,
+				     (const union acpi_object **)valptr);
+}
+
+int acpi_dev_prop_read_single(struct acpi_device *adev, const char *propname,
+			      enum dev_prop_type proptype, void *val)
+{
+	const union acpi_object *obj;
+	int ret;
+
+	if (!val)
+		return -EINVAL;
+
+	if (proptype >= DEV_PROP_U8 && proptype <= DEV_PROP_U64) {
+		ret = acpi_dev_get_property(adev, propname, ACPI_TYPE_INTEGER, &obj);
+		if (ret)
+			return ret;
+
+		switch (proptype) {
+		case DEV_PROP_U8:
+			if (obj->integer.value > U8_MAX)
+				return -EOVERFLOW;
+			*(u8 *)val = obj->integer.value;
+			break;
+		case DEV_PROP_U16:
+			if (obj->integer.value > U16_MAX)
+				return -EOVERFLOW;
+			*(u16 *)val = obj->integer.value;
+			break;
+		case DEV_PROP_U32:
+			if (obj->integer.value > U32_MAX)
+				return -EOVERFLOW;
+			*(u32 *)val = obj->integer.value;
+			break;
+		default:
+			*(u64 *)val = obj->integer.value;
+			break;
+		}
+	} else if (proptype == DEV_PROP_STRING) {
+		ret = acpi_dev_get_property(adev, propname, ACPI_TYPE_STRING, &obj);
+		if (ret)
+			return ret;
+
+		*(char **)val = obj->string.pointer;
+	} else {
+		ret = -EINVAL;
+	}
+	return ret;
+}
+
+static int acpi_copy_property_array_u8(const union acpi_object *items, u8 *val,
+				       size_t nval)
+{
+	int i;
+
+	for (i = 0; i < nval; i++) {
+		if (items[i].type != ACPI_TYPE_INTEGER)
+			return -EPROTO;
+		if (items[i].integer.value > U8_MAX)
+			return -EOVERFLOW;
+
+		val[i] = items[i].integer.value;
+	}
+	return 0;
+}
+
+static int acpi_copy_property_array_u16(const union acpi_object *items,
+					u16 *val, size_t nval)
+{
+	int i;
+
+	for (i = 0; i < nval; i++) {
+		if (items[i].type != ACPI_TYPE_INTEGER)
+			return -EPROTO;
+		if (items[i].integer.value > U16_MAX)
+			return -EOVERFLOW;
+
+		val[i] = items[i].integer.value;
+	}
+	return 0;
+}
+
+static int acpi_copy_property_array_u32(const union acpi_object *items,
+					u32 *val, size_t nval)
+{
+	int i;
+
+	for (i = 0; i < nval; i++) {
+		if (items[i].type != ACPI_TYPE_INTEGER)
+			return -EPROTO;
+		if (items[i].integer.value > U32_MAX)
+			return -EOVERFLOW;
+
+		val[i] = items[i].integer.value;
+	}
+	return 0;
+}
+
+static int acpi_copy_property_array_u64(const union acpi_object *items,
+					u64 *val, size_t nval)
+{
+	int i;
+
+	for (i = 0; i < nval; i++) {
+		if (items[i].type != ACPI_TYPE_INTEGER)
+			return -EPROTO;
+
+		val[i] = items[i].integer.value;
+	}
+	return 0;
+}
+
+static int acpi_copy_property_array_string(const union acpi_object *items,
+					   char **val, size_t nval)
+{
+	int i;
+
+	for (i = 0; i < nval; i++) {
+		if (items[i].type != ACPI_TYPE_STRING)
+			return -EPROTO;
+
+		val[i] = items[i].string.pointer;
+	}
+	return 0;
+}
+
+int acpi_dev_prop_read(struct acpi_device *adev, const char *propname,
+		       enum dev_prop_type proptype, void *val, size_t nval)
+{
+	const union acpi_object *obj;
+	const union acpi_object *items;
+	int ret;
+
+	if (val && nval == 1) {
+		ret = acpi_dev_prop_read_single(adev, propname, proptype, val);
+		if (!ret)
+			return ret;
+	}
+
+	ret = acpi_dev_get_property_array(adev, propname, ACPI_TYPE_ANY, &obj);
+	if (ret)
+		return ret;
+
+	if (!val)
+		return obj->package.count;
+	else if (nval <= 0)
+		return -EINVAL;
+
+	if (nval > obj->package.count)
+		return -EOVERFLOW;
+
+	items = obj->package.elements;
+	switch (proptype) {
+	case DEV_PROP_U8:
+		ret = acpi_copy_property_array_u8(items, (u8 *)val, nval);
+		break;
+	case DEV_PROP_U16:
+		ret = acpi_copy_property_array_u16(items, (u16 *)val, nval);
+		break;
+	case DEV_PROP_U32:
+		ret = acpi_copy_property_array_u32(items, (u32 *)val, nval);
+		break;
+	case DEV_PROP_U64:
+		ret = acpi_copy_property_array_u64(items, (u64 *)val, nval);
+		break;
+	case DEV_PROP_STRING:
+		ret = acpi_copy_property_array_string(items, (char **)val, nval);
+		break;
+	default:
+		ret = -EINVAL;
+		break;
+	}
+	return ret;
+}

--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

  parent reply	other threads:[~2014-11-04 16:38 UTC|newest]

Thread overview: 29+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2014-10-21 21:08 [PATCH v6 00/12] Add ACPI _DSD and unified device properties support Rafael J. Wysocki
2014-10-21 21:09 ` [PATCH v6 01/12] ACPI: Add support for device specific properties Rafael J. Wysocki
2014-10-21 21:15 ` [PATCH v6 02/12] Driver core: Unified device properties interface for platform firmware Rafael J. Wysocki
2014-11-03 15:40   ` Grant Likely
2014-11-03 22:04     ` Rafael J. Wysocki
     [not found]       ` <3645687.BsyGDrJDrU-sKB8Sp2ER+y1GS7QM15AGw@public.gmane.org>
2014-11-04 17:01         ` Grant Likely
     [not found]           ` <CACxGe6uv0TmoZivL3ESw+oRW-OjqakLP4KBnDrwJXzQ2ku8ZLA-JsoAwUIsXosN+BqQ9rBEUg@public.gmane.org>
2014-11-04 21:29             ` Rafael J. Wysocki
2014-11-04 15:51   ` Grant Likely
     [not found]     ` <20141104155112.6FC67C423D0-WNowdnHR2B42iJbIjFUEsiwD8/FfD2ys@public.gmane.org>
2014-11-04 16:20       ` Rafael J. Wysocki
     [not found]   ` <2127128.VT1Iq03xz1-sKB8Sp2ER+y1GS7QM15AGw@public.gmane.org>
2014-11-04 16:38     ` Rafael J. Wysocki [this message]
2014-10-21 21:19 ` [PATCH v6 03/12] ACPI: Allow drivers to match using Device Tree compatible property Rafael J. Wysocki
2014-10-21 21:19 ` [PATCH v6 04/12] misc: at25: Make use of device property API Rafael J. Wysocki
2014-11-04 14:18   ` Grant Likely
     [not found]     ` <20141104141826.36F8AC408F6-WNowdnHR2B42iJbIjFUEsiwD8/FfD2ys@public.gmane.org>
2014-11-04 14:38       ` Mika Westerberg
2014-11-04 15:04         ` Grant Likely
2014-11-04 16:19           ` Rafael J. Wysocki
     [not found]             ` <4645043.WOkgNMSUuO-sKB8Sp2ER+y1GS7QM15AGw@public.gmane.org>
2014-11-04 16:07               ` Mika Westerberg
2014-10-21 21:20 ` [PATCH v6 05/12] gpio / ACPI: Add support for _DSD device properties Rafael J. Wysocki
2014-10-21 21:21 ` [PATCH v6 06/12] gpio: sch: Consolidate core and resume banks Rafael J. Wysocki
2014-10-21 21:21 ` [PATCH v6 07/12] leds: leds-gpio: Add support for GPIO descriptors Rafael J. Wysocki
2014-10-21 21:22 ` [PATCH v6 08/12] input: gpio_keys_polled: " Rafael J. Wysocki
2014-10-21 21:29 ` [PATCH v6 09/12] Driver core: Unified interface for firmware node properties Rafael J. Wysocki
2014-11-04 16:43   ` [Update][PATCH " Rafael J. Wysocki
2014-10-21 21:33 ` [PATCH v6 10/12] gpio: Support for unified device properties interface Rafael J. Wysocki
2014-10-21 21:35 ` [PATCH v6 11/12] leds: leds-gpio: Make use of device property API Rafael J. Wysocki
2014-10-21 21:37 ` [PATCH v6 12/12] input: gpio_keys_polled: " Rafael J. Wysocki
2014-10-24 22:10 ` [PATCH v6 00/12] Add ACPI _DSD and unified device properties support Rafael J. Wysocki
2014-11-04 15:49   ` Grant Likely
2014-11-04 16:20     ` Rafael J. Wysocki

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=2077334.u2YofzPq8Z@vostro.rjw.lan \
    --to=rjw-lthd3rsa81gm4rdzfppkha@public.gmane.org \
    --cc=aaron.lu-ral2JQCrhuEAvxtiuMwx3w@public.gmane.org \
    --cc=arnd-r2nGTMty4D4@public.gmane.org \
    --cc=cooloney-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org \
    --cc=darren.hart-ral2JQCrhuEAvxtiuMwx3w@public.gmane.org \
    --cc=devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
    --cc=dmitry.torokhov-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org \
    --cc=gnurou-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org \
    --cc=grant.likely-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org \
    --cc=gregkh-hQyY1W1yCW8ekmWlsbkhG0B+6BGkLq7r@public.gmane.org \
    --cc=linus.walleij-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org \
    --cc=linux-acpi-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
    --cc=linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
    --cc=mika.westerberg-VuQAYsv1563Yd54FQh9/CA@public.gmane.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox