From mboxrd@z Thu Jan 1 00:00:00 1970 From: "Rafael J. Wysocki" Subject: [PATCH] PCI / ACPI / PM: Use correct power state strings in messages Date: Fri, 14 Jun 2013 00:29:50 +0200 Message-ID: <2491625.TQ1FFQeR38@vostro.rjw.lan> Mime-Version: 1.0 Content-Type: text/plain; charset="utf-8" Content-Transfer-Encoding: 7Bit Return-path: Received: from hydra.sisk.pl ([212.160.235.94]:36641 "EHLO hydra.sisk.pl" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1757899Ab3FMWUi (ORCPT ); Thu, 13 Jun 2013 18:20:38 -0400 Sender: linux-acpi-owner@vger.kernel.org List-Id: linux-acpi@vger.kernel.org To: Bjorn Helgaas Cc: LKML , Linux PCI , Linux PM list , ACPI Devel Maling List From: Rafael J. Wysocki Make acpi_pci_set_power_state() print the name of the ACPI device power state the device has been actually put into instead of printing the name of the requested PCI device power state, which need not be the same. Signed-off-by: Rafael J. Wysocki --- For 3.11. Thanks, Rafael --- drivers/pci/pci-acpi.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) Index: linux-pm/drivers/pci/pci-acpi.c =================================================================== --- linux-pm.orig/drivers/pci/pci-acpi.c +++ linux-pm/drivers/pci/pci-acpi.c @@ -211,7 +211,7 @@ static int acpi_pci_set_power_state(stru if (!error) dev_info(&dev->dev, "power state changed by ACPI to %s\n", - pci_power_name(state)); + acpi_power_state_string(state_conv[state])); return error; }