Re: [PATCH 0/2] intel_pstate: fix turbo not being used after a processor is rebooted

[srinivas pandruvada <srinivas.pandruvada@linux.intel.com>]

On Tue, 2022-12-27 at 16:38 +0100, Pratyush Yadav wrote:
> Hi Srinivas,
> 
> On Sat, Dec 24 2022, srinivas pandruvada wrote:
> 
> > On Fri, 2022-12-23 at 10:10 -0800, srinivas pandruvada wrote:
> > > Hi Pratyush,
> > > 
> > > On Thu, 2022-12-22 at 11:39 +0100, Pratyush Yadav wrote:
> > > > 
> > > > Hi Srinivas,
> > > > 
> > > > On Wed, Dec 21 2022, srinivas pandruvada wrote:
> > > > > On Wed, 2022-12-21 at 16:52 +0100, Pratyush Yadav wrote:
> > > > > > When a processor is brought offline and online again, it is
> > > > > > unable to
> > > > > > use Turbo mode because the _PSS table does not contain the
> > > > > > whole
> > > > > > turbo
> > > > > > frequency range, but only +1 MHz above the max non-turbo
> > > > > > frequency.
> > > > > > This
> > > > > > causes problems when ACPI processor driver tries to set
> > > > > > frequency
> > > > > > constraints. See patch 2 for more details.
> > > > > > 
> > > I can reproduce on a Broadwell server platform. But not on a
> > > client
> > > system with acpi_ppc usage.
> > > 
> > > Need to check what change broke this.
> > 
> > When PPC limits enforcement changed to PM QOS, this broke.
> > Previously
> > acpi_processor_get_platform_limit() was not enforcing any limits.
> > It
> > was just setting variable. So any update done after
> > acpi_register_performance_state() call to pr->performance-
> > > states[ppc].core_frequency, was effective.
> > 
> > We don't really need to call
> >         ret = freq_qos_update_request(&pr->perflib_req,
> >                         pr->performance->states[ppc].core_frequency
> > *
> > 1000);
> > 
> > if the PPC is not changed. When PPC is changed, this gets called
> > again,
> > so then we can call the above function to update cpufreq limit.
> > 
> > The below change fixed for me.
> 
> Right. 
I think, this is the only change you require to fix this. In addition
set pr->performance_platform_limit = 0 in
acpi_processor_unregister_performance().

Thanks,
Srinivas

> Should I re-roll my patches with your diff below then? Or do you
> think my patches should be good to merge as-is?
> 
> > 
> > diff --git a/drivers/acpi/processor_perflib.c
> > b/drivers/acpi/processor_perflib.c
> > index 757a98f6d7a2..c6ced89c00dd 100644
> > --- a/drivers/acpi/processor_perflib.c
> > +++ b/drivers/acpi/processor_perflib.c
> > @@ -75,6 +75,11 @@ static int
> > acpi_processor_get_platform_limit(struct
> > acpi_processor *pr)
> >         pr_debug("CPU %d: _PPC is %d - frequency %s limited\n", pr-
> > >id,
> >                        (int)ppc, ppc ? "" : "not");
> > 
> > +       if (ppc == pr->performance_platform_limit) {
> > +               pr_debug("CPU %d: _PPC is %d - frequency not
> > changed\n", pr->id, ppc);
> > +               return 0;
> > +       }
> > +
> >         pr->performance_platform_limit = (int)ppc;
> > 
> >         if (ppc >= pr->performance->state_count ||
> > 
>