Re: [RFT][PATCH v2 2/2] PM / i2c: designware: Clean up system sleep handling without ACPI

["Rafael J. Wysocki" <rjw@rjwysocki.net>]

On Tuesday, September 5, 2017 4:45:11 PM CEST Mika Westerberg wrote:
> On Mon, Sep 04, 2017 at 12:01:54PM +0200, Rafael J. Wysocki wrote:
> >  static const struct dev_pm_ops dw_i2c_dev_pm_ops = {
> > -	.prepare = dw_i2c_plat_prepare,
> > -	.complete = dw_i2c_plat_complete,
> > -	SET_SYSTEM_SLEEP_PM_OPS(dw_i2c_plat_suspend, dw_i2c_plat_resume)
> > -	SET_RUNTIME_PM_OPS(dw_i2c_plat_runtime_suspend,
> > -			   dw_i2c_plat_resume,
> > -			   NULL)
> > +	SET_LATE_SYSTEM_SLEEP_PM_OPS(dw_i2c_plat_suspend, dw_i2c_plat_resume)
> 
> This seems to cause problem with intel-lpss MFD driver because it uses
> .suspend() and .resume() instead of .suspend_late() and .resume_early().

OK, so there is one more dependency here.

Can you please point me to this code?

> It only brings the device out of reset during .resume() which triggers
> this:
> 
> [  221.066302] PM: noirq resume of devices complete after 162.461 msecs
> [  221.079743] i2c_designware i2c_designware.0: Unknown Synopsys component type: 0x00000000
> [  221.079749] i2c_designware i2c_designware.1: Unknown Synopsys component type: 0x00000000
> [  221.079880] PM: early resume of devices complete after 13.538 msecs
> ...
> [  222.115656] i2c_designware i2c_designware.1: controller timed out
> [  222.756572] [drm] RC6 on
> [  226.276006] i2c_hid i2c-DLL06E4:01: failed to reset device.
> [  227.300012] i2c_designware i2c_designware.1: controller timed out
> [  227.300037] i2c_hid i2c-DLL06E4:01: failed to change power setting.
> [  227.300048] dpm_run_callback(): i2c_hid_resume+0x0/0xf0 [i2c_hid] returns -61
> [  227.300057] PM: Device i2c-DLL06E4:01 failed to resume async: error -61
> 
> and the touchpad does not work from this point forward.

Thanks for the testing!