From mboxrd@z Thu Jan 1 00:00:00 1970 From: Joerg Beyer Subject: Re: Problems with T30 Date: Mon, 02 Sep 2002 17:28:50 +0200 Sender: acpi-devel-admin-5NWGOfrQmneRv+LV9MX5uipxlwaOVQ5f@public.gmane.org Message-ID: <3D7383B2.7000704@webde-ag.de> References: <20020902151012.GA892@rpi.edu> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii; format=flowed Content-Transfer-Encoding: 7bit Return-path: Errors-To: acpi-devel-admin-5NWGOfrQmneRv+LV9MX5uipxlwaOVQ5f@public.gmane.org List-Help: List-Post: List-Subscribe: , List-Unsubscribe: , List-Archive: To: Ethan Glasser-Camp Cc: acpi-devel-5NWGOfrQmneRv+LV9MX5uipxlwaOVQ5f@public.gmane.org List-Id: linux-acpi@vger.kernel.org Ethan Glasser-Camp wrote: > I have spent the past three or four days toying with the kernel, trying to convince it to allow me to compile debug messages into the ACPI modules. No can do. I'm not quite sure why, but if I try, make modules_install will give me unresolved symbol errors. does this also happen when you compile acpi not as module but in the kernel? i.e. the .config should say "ACPI.*=y" not "ACPI*=m" yours Joerg ------------------------------------------------------- This sf.net email is sponsored by: OSDN - Tired of that same old cell phone? Get a new here for FREE! https://www.inphonic.com/r.asp?r=sourceforge1&refcode1=vs3390