acpi on compaq evo n800c, P4 ,845

[Andreas Kerl <andreas.kerl-lg8xjlp1sE8@public.gmane.org>]

[-- Attachment #1: Type: text/plain, Size: 9091 bytes --]

Hi,
little problem here.
2.4.20-pre7 with latest acpi patch boots but i think the bios is a
little bit buggy (no BAT status and no suspend) ,so i tried to override
the dsdt but it doesn't worked.
(I deleted the * before PNP... in dsdt.asl and recompile but still get
some errors with iasl)
can anyone fix my dsdt? (it's attached) PLEASE

I also tried to override the dsdt with the original dsdt(without
modification)but both times the same errors (see below)


#dmesg
Linux version 2.4.20-pre7-acpi  (gcc version 3.1.1) #1 Don Sep 19
17:47:12 CEST 2002
BIOS-provided physical RAM map:
   BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
   BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
   BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
   BIOS-e820: 0000000000100000 - 000000001ffd0000 (usable)
   BIOS-e820: 000000001ffd0000 - 000000001fff0c00 (reserved)
   BIOS-e820: 000000001fff0c00 - 000000001fffc000 (ACPI NVS)
   BIOS-e820: 000000001fffc000 - 0000000020000000 (reserved)
0MB HIGHMEM available.
511MB LOWMEM available.
ACPI: have wakeup address 0xc0001000
On node 0 totalpages: 131024
zone(0): 4096 pages.
zone(1): 126928 pages.
zone(2): 0 pages.
ACPI: RSDP (v000 COMPAQ                     ) @ 0x000f9970
ACPI: RSDT (v001 COMPAQ CPQ004A  12549.00544) @ 0x1fff0c84
ACPI: FADT (v002 COMPAQ CPQ004A  00000.00002) @ 0x1fff0c00
ACPI: SSDT (v001 COMPAQ  CPQGysr 00000.04097) @ 0x1fff64c3
ACPI: SSDT (v001 COMPAQ   CPQMag 00000.04097) @ 0x1fff65d1
ACPI: DSDT (v001 COMPAQ  EVON800 00001.00000) @ 0x00000000
ACPI: BIOS passes blacklist
ACPI: MADT not present
Kernel command line: ro root=/dev/hda4 hdc=ide-scsi vga=794
ide_setup: hdc=ide-scsi
No local APIC present or hardware disabled
Initializing CPU#0
Detected 1794.206 MHz processor.
Console: colour dummy device 80x25
Calibrating delay loop... 3578.26 BogoMIPS
Memory: 514952k/524096k available (1422k kernel code, 8756k reserved,
514k data, 152k init, 0k highmem)
Dentry cache hash table entries: 65536 (order: 7, 524288 bytes)
Inode cache hash table entries: 32768 (order: 6, 262144 bytes)
Mount-cache hash table entries: 8192 (order: 4, 65536 bytes)
Buffer-cache hash table entries: 32768 (order: 5, 131072 bytes)
Page-cache hash table entries: 131072 (order: 7, 524288 bytes)
CPU: Before vendor init, caps: 3febf9ff 00000000 00000000, vendor = 0
CPU: L1 I cache: 0K, L1 D cache: 8K
CPU: L2 cache: 512K
CPU: After vendor init, caps: 3febf9ff 00000000 00000000 00000000
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
CPU:     After generic, caps: 3febf9ff 00000000 00000000 00000000
CPU:             Common caps: 3febf9ff 00000000 00000000 00000000
CPU: Intel(R) Pentium(R) 4 Mobile CPU 1.80GHz stepping 04
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Checking 'hlt' instruction... OK.
POSIX conformance testing by UNIFIX
mtrr: v1.40 (20010327) Richard Gooch (rgooch-r1x6VkxMR+00zabcByZE4g@public.gmane.org)
mtrr: detected mtrr type: Intel
ACPI: Subsystem revision 20020918
PCI: PCI BIOS revision 2.10 entry at 0xf031f, last bus=3
PCI: Using configuration type 1
      ACPI-0274: *** Info: Table [DSDT] replaced by host OS
      ACPI-0107: *** Error: Acpi_load_tables: Could not load namespace:
AE_AML_BAD_NAME
      ACPI-0116: *** Error: Acpi_load_tables: Could not load tables:
AE_AML_BAD_NAME
ACPI: Unable to load the System Description Tables
PCI: Probing PCI hardware
PCI: ACPI tables contain no PCI IRQ routing entries
PCI: Probing PCI hardware (bus 00)
Transparent bridge - Intel Corp. 82801BAM/CAM PCI Bridge
PCI: Using IRQ router PIIX [8086/248c] at 00:1f.0
PCI: Found IRQ 10 for device 02:0e.1
PCI: Sharing IRQ 10 with 02:08.0
PCI: Sharing IRQ 10 with 02:0e.0
PCI: Sharing IRQ 10 with 02:0e.2
isapnp: Scanning for PnP cards...
isapnp: No Plug & Play device found
Linux NET4.0 for Linux 2.4
Based upon Swansea University Computer Society NET3.039
Initializing RT netlink socket
Starting kswapd
VFS: Diskquotas version dquot_6.4.0 initialized
vesafb: framebuffer at 0x48000000, mapped to 0xe0806000, size 65472k
vesafb: mode is 1280x1024x16, linelength=2560, pages=24
vesafb: protected mode interface info at c000:561f
vesafb: scrolling: redraw
vesafb: directcolor: size=0:5:6:5, shift=0:11:5:0
Console: switching to colour frame buffer device 160x64
fb0: VESA VGA frame buffer device
pty: 2048 Unix98 ptys configured
Serial driver version 5.05c (2001-07-08) with MANY_PORTS MULTIPORT
SHARE_IRQ SERIAL_PCI ISAPNP enabled
ttyS00 at 0x03f8 (irq = 4) is a 16550A
ttyS02 at 0x03e8 (irq = 4) is a 16550A
Real Time Clock Driver v1.10e
Uniform Multi-Platform E-IDE driver Revision: 6.31
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
ICH3M: IDE controller on PCI bus 00 dev f9
PCI: Device 00:1f.1 not available because of resource collisions
PCI: Assigned IRQ 11 for device 00:1f.1
ICH3M: BIOS setup was incomplete.
ICH3M: chipset revision 2
ICH3M: not 100% native mode: will probe irqs later
      ide0: BM-DMA at 0x4440-0x4447, BIOS settings: hda:DMA, hdb:pio
      ide1: BM-DMA at 0x4448-0x444f, BIOS settings: hdc:DMA, hdd:pio
hda: IC25T060ATCS05-0, ATA DISK drive
hdc: DW-28E, ATAPI CD/DVD-ROM drive
ide2: ports already in use, skipping probe
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
ide1 at 0x170-0x177,0x376 on irq 15
blk: queue c0351184, I/O limit 4095Mb (mask 0xffffffff)
hda: 117210240 sectors (60012 MB) w/1768KiB Cache, CHS=7752/240/63,
UDMA(100)
ide-floppy driver 0.99.newide
Partition check:
   hda: hda1 hda2 hda3 < hda5 hda6 > hda4
Floppy drive(s): fd0 is 1.44M
FDC 0 is a National Semiconductor PC87306
RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize
Linux agpgart interface v0.99 (c) Jeff Hartmann
agpgart: Maximum main memory to use for agp memory: 439M
agpgart: Detected Intel i845 chipset
agpgart: AGP aperture is 256M @ 0x60000000
ide-floppy driver 0.99.newide
md: md driver 0.90.0 MAX_MD_DEVS=256, MD_SB_DISKS=27
md: Autodetecting RAID arrays.
md: autorun ...
md: ... autorun DONE.
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP, IGMP
IP: routing cache hash table of 4096 buckets, 32Kbytes
TCP: Hash tables configured (established 32768 bind 65536)
Linux IP multicast router 0.06 plus PIM-SM
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
RAMDISK: Compressed image found at block 0
Freeing initrd memory: 122k freed
VFS: Mounted root (ext2 filesystem).
Journalled Block Device driver loaded
kjournald starting.  Commit interval 5 seconds
EXT3-fs: mounted filesystem with ordered data mode.
Freeing unused kernel memory: 152k freed
Adding Swap: 529164k swap-space (priority -1)
usb.c: registered new driver usbdevfs
usb.c: registered new driver hub
PCI: Found IRQ 10 for device 02:0e.0
PCI: Sharing IRQ 10 with 02:08.0
PCI: Sharing IRQ 10 with 02:0e.1
PCI: Sharing IRQ 10 with 02:0e.2
usb-ohci.c: USB OHCI at membase 0xe48bb000, IRQ 10
usb-ohci.c: usb-02:0e.0, NEC Corporation USB
usb.c: new USB bus registered, assigned bus number 1
hub.c: USB hub found
hub.c: 3 ports detected
PCI: Found IRQ 10 for device 02:0e.1
PCI: Sharing IRQ 10 with 02:08.0
PCI: Sharing IRQ 10 with 02:0e.0
PCI: Sharing IRQ 10 with 02:0e.2
usb-ohci.c: USB OHCI at membase 0xe48bd000, IRQ 10
usb-ohci.c: usb-02:0e.1, NEC Corporation USB (#2)
usb.c: new USB bus registered, assigned bus number 2
hub.c: USB hub found
hub.c: 2 ports detected
hub.c: new USB device 02:0e.1-1, assigned address 2
hub.c: USB hub found
hub.c: 3 ports detected
hub.c: new USB device 02:0e.1-2, assigned address 3
hub.c: USB hub found
hub.c: 3 ports detected
hub.c: new USB device 02:0e.1-2.1, assigned address 4
usb.c: USB device 4 (vend/prod 0x603/0x7134) is not claimed by any
active driver.
usb.c: registered new driver usb_mouse
input0:  USB Mouse STD.   on usb2:4.0
usbmouse.c: v1.6:USB HID Boot Protocol mouse driver
usb.c: registered new driver hiddev
usb.c: registered new driver hid
hid-core.c: v1.8.1 Andreas Gal, Vojtech Pavlik <vojtech-AlSwsSmVLrQ@public.gmane.org>
hid-core.c: USB HID support drivers
mice: PS/2 mouse device common for all mice
EXT3 FS 2.4-0.9.17, 10 Jan 2002 on ide0(3,4), internal journal
kjournald starting.  Commit interval 5 seconds
EXT3 FS 2.4-0.9.17, 10 Jan 2002 on ide0(3,2), internal journal
EXT3-fs: mounted filesystem with ordered data mode.
SCSI subsystem driver Revision: 1.00
scsi0 : SCSI host adapter emulation for IDE ATAPI devices
    Vendor: TEAC      Model: DW-28E            Rev: A.0B
    Type:   CD-ROM                             ANSI SCSI revision: 02
hdc: DMA disabled
parport0: PC-style at 0x378 (0x778) [PCSPP,TRISTATE,EPP]
parport0: irq 7 detected
Linux Kernel Card Services 3.1.22
    options:  [pci] [cardbus] [pm]
PCI: Found IRQ 11 for device 02:06.0
Yenta IRQ list 0298, PCI irq11
Socket status: 30000006
cs: IO port probe 0x0c00-0x0cff: clean.
cs: IO port probe 0x0100-0x04ff: excluding 0x378-0x37f 0x4d0-0x4d7
cs: IO port probe 0x0a00-0x0aff: clean.
parport0: PC-style at 0x378 (0x778) [PCSPP,TRISTATE,EPP]
parport0: irq 7 detected
lp0: using parport0 (polling).
lp0: console ready




Thanks,
Andreas



[-- Attachment #2: dsdt.asl.gz --]
[-- Type: application/x-gzip, Size: 16462 bytes --]

[-- Attachment #3: dsdt.dat.gz --]
[-- Type: application/x-gzip, Size: 9947 bytes --]