acpi on compaq evo n800c, P4 ,845

acpi on compaq evo n800c, P4 ,845

[Andreas Kerl]

[-- Attachment #1: Type: text/plain, Size: 9091 bytes --]

Hi,
little problem here.
2.4.20-pre7 with latest acpi patch boots but i think the bios is a
little bit buggy (no BAT status and no suspend) ,so i tried to override
the dsdt but it doesn't worked.
(I deleted the * before PNP... in dsdt.asl and recompile but still get
some errors with iasl)
can anyone fix my dsdt? (it's attached) PLEASE

I also tried to override the dsdt with the original dsdt(without
modification)but both times the same errors (see below)


#dmesg
Linux version 2.4.20-pre7-acpi  (gcc version 3.1.1) #1 Don Sep 19
17:47:12 CEST 2002
BIOS-provided physical RAM map:
   BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
   BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
   BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
   BIOS-e820: 0000000000100000 - 000000001ffd0000 (usable)
   BIOS-e820: 000000001ffd0000 - 000000001fff0c00 (reserved)
   BIOS-e820: 000000001fff0c00 - 000000001fffc000 (ACPI NVS)
   BIOS-e820: 000000001fffc000 - 0000000020000000 (reserved)
0MB HIGHMEM available.
511MB LOWMEM available.
ACPI: have wakeup address 0xc0001000
On node 0 totalpages: 131024
zone(0): 4096 pages.
zone(1): 126928 pages.
zone(2): 0 pages.
ACPI: RSDP (v000 COMPAQ                     ) @ 0x000f9970
ACPI: RSDT (v001 COMPAQ CPQ004A  12549.00544) @ 0x1fff0c84
ACPI: FADT (v002 COMPAQ CPQ004A  00000.00002) @ 0x1fff0c00
ACPI: SSDT (v001 COMPAQ  CPQGysr 00000.04097) @ 0x1fff64c3
ACPI: SSDT (v001 COMPAQ   CPQMag 00000.04097) @ 0x1fff65d1
ACPI: DSDT (v001 COMPAQ  EVON800 00001.00000) @ 0x00000000
ACPI: BIOS passes blacklist
ACPI: MADT not present
Kernel command line: ro root=/dev/hda4 hdc=ide-scsi vga=794
ide_setup: hdc=ide-scsi
No local APIC present or hardware disabled
Initializing CPU#0
Detected 1794.206 MHz processor.
Console: colour dummy device 80x25
Calibrating delay loop... 3578.26 BogoMIPS
Memory: 514952k/524096k available (1422k kernel code, 8756k reserved,
514k data, 152k init, 0k highmem)
Dentry cache hash table entries: 65536 (order: 7, 524288 bytes)
Inode cache hash table entries: 32768 (order: 6, 262144 bytes)
Mount-cache hash table entries: 8192 (order: 4, 65536 bytes)
Buffer-cache hash table entries: 32768 (order: 5, 131072 bytes)
Page-cache hash table entries: 131072 (order: 7, 524288 bytes)
CPU: Before vendor init, caps: 3febf9ff 00000000 00000000, vendor = 0
CPU: L1 I cache: 0K, L1 D cache: 8K
CPU: L2 cache: 512K
CPU: After vendor init, caps: 3febf9ff 00000000 00000000 00000000
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
CPU:     After generic, caps: 3febf9ff 00000000 00000000 00000000
CPU:             Common caps: 3febf9ff 00000000 00000000 00000000
CPU: Intel(R) Pentium(R) 4 Mobile CPU 1.80GHz stepping 04
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Checking 'hlt' instruction... OK.
POSIX conformance testing by UNIFIX
mtrr: v1.40 (20010327) Richard Gooch (rgooch-r1x6VkxMR+00zabcByZE4g@public.gmane.org)
mtrr: detected mtrr type: Intel
ACPI: Subsystem revision 20020918
PCI: PCI BIOS revision 2.10 entry at 0xf031f, last bus=3
PCI: Using configuration type 1
      ACPI-0274: *** Info: Table [DSDT] replaced by host OS
      ACPI-0107: *** Error: Acpi_load_tables: Could not load namespace:
AE_AML_BAD_NAME
      ACPI-0116: *** Error: Acpi_load_tables: Could not load tables:
AE_AML_BAD_NAME
ACPI: Unable to load the System Description Tables
PCI: Probing PCI hardware
PCI: ACPI tables contain no PCI IRQ routing entries
PCI: Probing PCI hardware (bus 00)
Transparent bridge - Intel Corp. 82801BAM/CAM PCI Bridge
PCI: Using IRQ router PIIX [8086/248c] at 00:1f.0
PCI: Found IRQ 10 for device 02:0e.1
PCI: Sharing IRQ 10 with 02:08.0
PCI: Sharing IRQ 10 with 02:0e.0
PCI: Sharing IRQ 10 with 02:0e.2
isapnp: Scanning for PnP cards...
isapnp: No Plug & Play device found
Linux NET4.0 for Linux 2.4
Based upon Swansea University Computer Society NET3.039
Initializing RT netlink socket
Starting kswapd
VFS: Diskquotas version dquot_6.4.0 initialized
vesafb: framebuffer at 0x48000000, mapped to 0xe0806000, size 65472k
vesafb: mode is 1280x1024x16, linelength=2560, pages=24
vesafb: protected mode interface info at c000:561f
vesafb: scrolling: redraw
vesafb: directcolor: size=0:5:6:5, shift=0:11:5:0
Console: switching to colour frame buffer device 160x64
fb0: VESA VGA frame buffer device
pty: 2048 Unix98 ptys configured
Serial driver version 5.05c (2001-07-08) with MANY_PORTS MULTIPORT
SHARE_IRQ SERIAL_PCI ISAPNP enabled
ttyS00 at 0x03f8 (irq = 4) is a 16550A
ttyS02 at 0x03e8 (irq = 4) is a 16550A
Real Time Clock Driver v1.10e
Uniform Multi-Platform E-IDE driver Revision: 6.31
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
ICH3M: IDE controller on PCI bus 00 dev f9
PCI: Device 00:1f.1 not available because of resource collisions
PCI: Assigned IRQ 11 for device 00:1f.1
ICH3M: BIOS setup was incomplete.
ICH3M: chipset revision 2
ICH3M: not 100% native mode: will probe irqs later
      ide0: BM-DMA at 0x4440-0x4447, BIOS settings: hda:DMA, hdb:pio
      ide1: BM-DMA at 0x4448-0x444f, BIOS settings: hdc:DMA, hdd:pio
hda: IC25T060ATCS05-0, ATA DISK drive
hdc: DW-28E, ATAPI CD/DVD-ROM drive
ide2: ports already in use, skipping probe
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
ide1 at 0x170-0x177,0x376 on irq 15
blk: queue c0351184, I/O limit 4095Mb (mask 0xffffffff)
hda: 117210240 sectors (60012 MB) w/1768KiB Cache, CHS=7752/240/63,
UDMA(100)
ide-floppy driver 0.99.newide
Partition check:
   hda: hda1 hda2 hda3 < hda5 hda6 > hda4
Floppy drive(s): fd0 is 1.44M
FDC 0 is a National Semiconductor PC87306
RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize
Linux agpgart interface v0.99 (c) Jeff Hartmann
agpgart: Maximum main memory to use for agp memory: 439M
agpgart: Detected Intel i845 chipset
agpgart: AGP aperture is 256M @ 0x60000000
ide-floppy driver 0.99.newide
md: md driver 0.90.0 MAX_MD_DEVS=256, MD_SB_DISKS=27
md: Autodetecting RAID arrays.
md: autorun ...
md: ... autorun DONE.
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP, IGMP
IP: routing cache hash table of 4096 buckets, 32Kbytes
TCP: Hash tables configured (established 32768 bind 65536)
Linux IP multicast router 0.06 plus PIM-SM
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
RAMDISK: Compressed image found at block 0
Freeing initrd memory: 122k freed
VFS: Mounted root (ext2 filesystem).
Journalled Block Device driver loaded
kjournald starting.  Commit interval 5 seconds
EXT3-fs: mounted filesystem with ordered data mode.
Freeing unused kernel memory: 152k freed
Adding Swap: 529164k swap-space (priority -1)
usb.c: registered new driver usbdevfs
usb.c: registered new driver hub
PCI: Found IRQ 10 for device 02:0e.0
PCI: Sharing IRQ 10 with 02:08.0
PCI: Sharing IRQ 10 with 02:0e.1
PCI: Sharing IRQ 10 with 02:0e.2
usb-ohci.c: USB OHCI at membase 0xe48bb000, IRQ 10
usb-ohci.c: usb-02:0e.0, NEC Corporation USB
usb.c: new USB bus registered, assigned bus number 1
hub.c: USB hub found
hub.c: 3 ports detected
PCI: Found IRQ 10 for device 02:0e.1
PCI: Sharing IRQ 10 with 02:08.0
PCI: Sharing IRQ 10 with 02:0e.0
PCI: Sharing IRQ 10 with 02:0e.2
usb-ohci.c: USB OHCI at membase 0xe48bd000, IRQ 10
usb-ohci.c: usb-02:0e.1, NEC Corporation USB (#2)
usb.c: new USB bus registered, assigned bus number 2
hub.c: USB hub found
hub.c: 2 ports detected
hub.c: new USB device 02:0e.1-1, assigned address 2
hub.c: USB hub found
hub.c: 3 ports detected
hub.c: new USB device 02:0e.1-2, assigned address 3
hub.c: USB hub found
hub.c: 3 ports detected
hub.c: new USB device 02:0e.1-2.1, assigned address 4
usb.c: USB device 4 (vend/prod 0x603/0x7134) is not claimed by any
active driver.
usb.c: registered new driver usb_mouse
input0:  USB Mouse STD.   on usb2:4.0
usbmouse.c: v1.6:USB HID Boot Protocol mouse driver
usb.c: registered new driver hiddev
usb.c: registered new driver hid
hid-core.c: v1.8.1 Andreas Gal, Vojtech Pavlik <vojtech-AlSwsSmVLrQ@public.gmane.org>
hid-core.c: USB HID support drivers
mice: PS/2 mouse device common for all mice
EXT3 FS 2.4-0.9.17, 10 Jan 2002 on ide0(3,4), internal journal
kjournald starting.  Commit interval 5 seconds
EXT3 FS 2.4-0.9.17, 10 Jan 2002 on ide0(3,2), internal journal
EXT3-fs: mounted filesystem with ordered data mode.
SCSI subsystem driver Revision: 1.00
scsi0 : SCSI host adapter emulation for IDE ATAPI devices
    Vendor: TEAC      Model: DW-28E            Rev: A.0B
    Type:   CD-ROM                             ANSI SCSI revision: 02
hdc: DMA disabled
parport0: PC-style at 0x378 (0x778) [PCSPP,TRISTATE,EPP]
parport0: irq 7 detected
Linux Kernel Card Services 3.1.22
    options:  [pci] [cardbus] [pm]
PCI: Found IRQ 11 for device 02:06.0
Yenta IRQ list 0298, PCI irq11
Socket status: 30000006
cs: IO port probe 0x0c00-0x0cff: clean.
cs: IO port probe 0x0100-0x04ff: excluding 0x378-0x37f 0x4d0-0x4d7
cs: IO port probe 0x0a00-0x0aff: clean.
parport0: PC-style at 0x378 (0x778) [PCSPP,TRISTATE,EPP]
parport0: irq 7 detected
lp0: using parport0 (polling).
lp0: console ready




Thanks,
Andreas



[-- Attachment #2: dsdt.asl.gz --]
[-- Type: application/x-gzip, Size: 16462 bytes --]

[-- Attachment #3: dsdt.dat.gz --]
[-- Type: application/x-gzip, Size: 9947 bytes --]

Re: acpi on compaq evo n800c, P4 ,845

[Zdeněk OGAR Skalák]

[-- Attachment #1: Type: text/plain, Size: 1628 bytes --]

Hi,

> little problem here.
> 2.4.20-pre7 with latest acpi patch boots but i think the bios is a
> little bit buggy (no BAT status and no suspend) ,so i tried to override
> the dsdt but it doesn't worked. (I deleted the * before PNP... in dsdt.asl
> and recompile but still get some errors with iasl)
> can anyone fix my dsdt? (it's attached) PLEASE

	I have Compaq Armada 110 a had the same problem :-{ I hat to patch DSDT and BAT
started to work (partialy :-). 
	There apears /proc/acpi/battery/BAT1 there, info seems to work, but state show
strange remaining capacity (it seems to me as some sort of integer overflow :-{
It seems to be related to error in Ds_init_buffer_field :-{ (see attached dmesg)

	The main patch is:
1. into Scope(_SB){ add Name(OKEC,0x00) <- originaly wasn't found (actual was
defined in another scope :-{
2. change all references from \_SB.OKEC() into \_SB.OKEC !!
3. in one place, call SEBI() instead of SEBS() (not sure of this, but seems
SEBS() return static info, and SEBI() dynamic, but it was long ago I played with
this)
4. remove one premature return(TPTM) (actual change to Store(TPTM,Local0) ) from
method _TMP (this is only cometic - to got debug of temp int Celsius and Kelvin
degrees too), not needed

	I've included the orignal DSTS, the diff (there are lots of debug messages
writen by me too, just search for string OGI :-), and the dmesg after patching
the DSDT. 

	Could someone have a look at that? 
	
	Zdenek Ogar Skalak

-- 
Ing. Zdeněk OGAR Skalák
Monet+ a.s.
Zámecká 365
763 14 Zlín - Štípa, CZ
Tel: 067 / 711 04 11,  Fax: 067 / 791 45 57

[-- Attachment #2: dsdt.diff.gz --]
[-- Type: application/x-gzip, Size: 3247 bytes --]

[-- Attachment #3: dsdt.asl.lin.gz --]
[-- Type: application/x-gzip, Size: 31978 bytes --]

[-- Attachment #4: dmesg.gz --]
[-- Type: application/x-gzip, Size: 4518 bytes --]