Re: ACPI prevents detection of SCSI HA

[Bernd Pfrommer <berndp-p32f3XyCuykqcZcGjlUOXw@public.gmane.org>]

[-- Attachment #1: Type: text/plain, Size: 16823 bytes --]

This looks exactly like the problem I have with my AMIBIOS on an Intel 
SRMK2 dual PIII server.
Andy suggested patching a bug in the DSDT by swapping the contents of 
the If and Else in the snippet below:

    Method(GETI, 1) {
        If(And(Arg0, 0xf, )) {
            Return(Zero)
        }
        Else {
            Return(\MLIB.CNV2(And(Arg0, 0xf, )))
        }
    }


Then the interrupt assignment looks more reasonable, but there is still 
a problem with the IRQ distribution such that the SCSI disk cannot be 
accessed. So as of right now, my box won't boot either unless I set 
acpi=off.

Is your system a dual-PIII (max 1GHz) with a ServerWorks chipset?

Bernd


Guenther Thomsen wrote:

>Hi,
>
>my Gateway 2000 PC server 6400 with ASUS CUR-DLS MB doesn't boot 
>linux-2.5.47 (the first 2.5 I tried on that box) from SCSI unless 
>I disable ACPI. Apparently the SCSI HA wont recognized/initialized.
>
>Please let me know, if I can provide more information to help fix 
>this issue.
>
>cheers
>	Guenther
>
>PS: please send e-mail to gthomsen-rphTv4pjVZMJGwgDXS7ZQA@public.gmane.org, as I do not frequent
>this list.
>  
>
>------------------------------------------------------------------------
>
>LILO 22.2 boot: new acpi=nopci
>Loading new
>s\b \bLinux version 2.5.47 (tho@paris) (gcc version 2.95.4 20011002 (Debian prerelease)) #2 SMP Wed Nov 13 14:57:25 PST 2002
>Video mode to be used for restore is ffff
>BIOS-provided physical RAM map:
> BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
> BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
> BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
> BIOS-e820: 0000000000100000 - 0000000027ff0000 (usable)
> BIOS-e820: 0000000027ff0000 - 0000000027fff000 (ACPI data)
> BIOS-e820: 0000000027fff000 - 0000000028000000 (ACPI NVS)
> BIOS-e820: 00000000fec00000 - 00000000fec02000 (reserved)
> BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
> BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved)
>639MB LOWMEM available.
>found SMP MP-table at 000ff780
>hm, page 000ff000 reserved twice.
>hm, page 00100000 reserved twice.
>hm, page 000f1000 reserved twice.
>hm, page 000f2000 reserved twice.
>On node 0 totalpages: 163824
>  DMA zone: 4096 pages, LIFO batch:1
>  Normal zone: 159728 pages, LIFO batch:16
>  HighMem zone: 0 pages, LIFO batch:1
>ACPI: RSDP (v000 AMI                        ) @ 0x000ff8f0
>ACPI: RSDT (v001 RCC    RCCNILE  00000.00001) @ 0x27ff0000
>ACPI: FADT (v001 RCC    RCCNILE  00000.00001) @ 0x27ff0030
>ACPI: MADT (v001 RCC    RCCNILE  00000.00001) @ 0x27ff00b0
>ACPI: DSDT (v001    RCC  CNB30LE 00000.00256) @ 0x00000000
>ACPI: BIOS passes blacklist
>ACPI: Local APIC address 0xfee00000
>ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
>Processor #0 6:8 APIC version 16
>ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] disabled)
>ACPI: IOAPIC (id[0x04] address[0xfec00000] global_irq_base[0x0])
>IOAPIC[0]: Assigned apic_id 4
>IOAPIC[0]: apic_id 4, version 17, address 0xfec00000, IRQ 0-15
>ACPI: IOAPIC (id[0x05] address[0xfec01000] global_irq_base[0x10])
>IOAPIC[1]: Assigned apic_id 5
>IOAPIC[1]: apic_id 5, version 17, address 0xfec01000, IRQ 16-31
>ACPI: INT_SRC_OVR (bus[0] irq[0x0] global_irq[0x2] polarity[0x0] trigger[0x0])
>Using ACPI (MADT) for SMP configuration information
>Building zonelist for node : 0
>Kernel command line: auto BOOT_IMAGE=new ro root=805 panic=30 console=ttyS0 console=tty0 hda=none hdb=none hdc=none hdd=none acpi=nopci
>ide_setup: hda=none
>ide_setup: hdb=none
>ide_setup: hdc=none
>ide_setup: hdd=none
>Initializing CPU#0
>Detected 933.596 MHz processor.
>Console: colour VGA+ 80x25
>Calibrating delay loop... 1843.20 BogoMIPS
>Memory: 644260k/655296k available (2042k kernel code, 10280k reserved, 992k data, 124k init, 0k highmem)
>Security Scaffold v1.0.0 initialized
>Dentry cache hash table entries: 131072 (order: 8, 1048576 bytes)
>Inode-cache hash table entries: 65536 (order: 7, 524288 bytes)
>Mount-cache hash table entries: 512 (order: 0, 4096 bytes)
>-> /dev
>-> /dev/console
>-> /root
>CPU: L1 I cache: 16K, L1 D cache: 16K
>CPU: L2 cache: 256K
>CPU serial number disabled.
>Intel machine check architecture supported.
>Intel machine check reporting enabled on CPU#0.
>Enabling fast FPU save and restore... done.
>Enabling unmasked SIMD FPU exception support... done.
>Checking 'hlt' instruction... OK.
>POSIX conformance testing by UNIFIX
>CPU0: Intel Pentium III (Coppermine) stepping 06
>per-CPU timeslice cutoff: 731.32 usecs.
>task migration cache decay timeout: 1 msecs.
>enabled ExtINT on CPU#0
>ESR value before enabling vector: 00000004
>ESR value after enabling vector: 00000000
>Error: only one processor found.
>ENABLING IO-APIC IRQs
>..TIMER: vector=0x31 pin1=2 pin2=0
>..MP-BIOS bug: 8254 timer not connected to IO-APIC
>...trying to set up timer (IRQ0) through the 8259A ... 
>..... (found pin 0) ...works.
>testing the IO APIC.......................
>
>
>.................................... done.
>Using local APIC timer interrupts.
>calibrating APIC timer ...
>..... CPU clock speed is 933.0179 MHz.
>..... host bus clock speed is 133.0311 MHz.
>Starting migration thread for cpu 0
>CPUS done 32
>Linux NET4.0 for Linux 2.4
>Based upon Swansea University Computer Society NET3.039
>Initializing RT netlink socket
>mtrr: v2.0 (20020519)
>PCI: PCI BIOS revision 2.10 entry at 0xfdbb1, last bus=1
>PCI: Using configuration type 1
>BIO: pool of 256 setup, 14Kb (56 bytes/bio)
>biovec pool[0]:   1 bvecs: 256 entries (12 bytes)
>biovec pool[1]:   4 bvecs: 256 entries (48 bytes)
>biovec pool[2]:  16 bvecs: 256 entries (192 bytes)
>biovec pool[3]:  64 bvecs: 256 entries (768 bytes)
>biovec pool[4]: 128 bvecs: 256 entries (1536 bytes)
>biovec pool[5]: 256 bvecs: 256 entries (3072 bytes)
>ACPI: Subsystem revision 20021101
> tbxface-0099 [03] Acpi_load_tables      : ACPI Tables successfully acquired
> dswload-0503: *** Warning: Type override - [DEB_] had invalid type (Integer) for Scope operator, changed to (Scope)
> dswload-0503: *** Warning: Type override - [MLIB] had invalid type (Integer) for Scope operator, changed to (Scope)
> dswload-0503: *** Warning: Type override - [IO__] had invalid type (Integer) for Scope operator, changed to (Scope)
> dswload-0503: *** Warning: Type override - [DATA] had invalid type (String) for Scope operator, changed to (Scope)
> dswload-0503: *** Warning: Type override - [SIO_] had invalid type (String) for Scope operator, changed to (Scope)
> dswload-0503: *** Warning: Type override - [SB__] had invalid type (String) for Scope operator, changed to (Scope)
> dswload-0503: *** Warning: Type override - [PM__] had invalid type (String) for Scope operator, changed to (Scope)
> dswload-0503: *** Warning: Type override - [ICNT] had invalid type (String) for Scope operator, changed to (Scope)
> dswload-0503: *** Warning: Type override - [ACPI] had invalid type (String) for Scope operator, changed to (Scope)
> dswload-0503: *** Warning: Type override - [OSB4] had invalid type (String) for Scope operator, changed to (Scope)
> dswload-0503: *** Warning: Type override - [PM__] had invalid type (String) for Scope operator, changed to (Scope)
> dswload-0503: *** Warning: Type override - [BIOS] had invalid type (Integer) for Scope operator, changed to (Scope)
> dswload-0503: *** Warning: Type override - [CMOS] had invalid type (Integer) for Scope operator, changed to (Scope)
>Parsing Methods:................................................................................................................................................................................................
>Table [DSDT] - 662 Objects with 45 Devices 192 Methods 14 Regions
>ACPI Namespace successfully loaded at root c046527c
>evxfevnt-0074 [04] Acpi_enable           : Transition to ACPI mode successful
> evevent-0508: *** Info: GPE Block0 defined as GPE0 to GPE31
> evevent-0508: *** Info: GPE Block1 defined as GPE32 to GPE63
>Executing all Device _STA and_INI methods:.............................................
>45 Devices found containing: 45 _STA, 2 _INI methods
>Completing Region/Field/Buffer/Package initialization:.................................................................
>Initialized 10/14 Regions 2/2 Fields 42/42 Buffers 11/11 Packages (662 nodes)
>ACPI: Interpreter enabled
>ACPI: Using IOAPIC for interrupt routing
>ACPI: PCI Root Bridge [NRTH] (00:00)
>PCI: Probing PCI hardware (bus 00)
>ACPI: PCI Root Bridge [PCI1] (00:00)
>ACPI: PCI Interrupt Link [LN00] (IRQs 3 4 5 7 9 11 12 14 15, disabled)
>ACPI: PCI Interrupt Link [LN01] (IRQs 3 4 5 7 9 11 12 14 15, disabled)
>pci_link-0249 [07] acpi_pci_link_get_curr: Invalid use of IRQ 0
>ACPI: PCI Interrupt Link [LN02] (IRQs 3 4 5 7 9 11 12 14 15, disabled)
>pci_link-0249 [07] acpi_pci_link_get_curr: Invalid use of IRQ 0
>ACPI: PCI Interrupt Link [LN03] (IRQs 3 4 5 7 9 11 12 14 15, disabled)
>ACPI: PCI Interrupt Link [LN04] (IRQs 3 4 5 7 9 11 12 14 15, disabled)
>pci_link-0249 [07] acpi_pci_link_get_curr: Invalid use of IRQ 0
>ACPI: PCI Interrupt Link [LN05] (IRQs 3 4 5 7 9 11 12 14 15, disabled)
>pci_link-0249 [07] acpi_pci_link_get_curr: Invalid use of IRQ 0
>ACPI: PCI Interrupt Link [LN06] (IRQs 3 4 5 7 9 11 12 14 15, disabled)
>pci_link-0249 [07] acpi_pci_link_get_curr: Invalid use of IRQ 0
>ACPI: PCI Interrupt Link [LN07] (IRQs 3 4 5 7 9 11 12 14 15, disabled)
>ACPI: PCI Interrupt Link [LN08] (IRQs 3 4 5 7 9 11 12 14 15, disabled)
>ACPI: PCI Interrupt Link [LN09] (IRQs 3 4 5 7 9 11 12 14 15, disabled)
>pci_link-0249 [07] acpi_pci_link_get_curr: Invalid use of IRQ 0
>ACPI: PCI Interrupt Link [LN10] (IRQs 3 4 5 7 9 11 12 14 15, disabled)
>pci_link-0249 [07] acpi_pci_link_get_curr: Invalid use of IRQ 0
>ACPI: PCI Interrupt Link [LN11] (IRQs 3 4 5 7 9 11 12 14 15, disabled)
>pci_link-0249 [07] acpi_pci_link_get_curr: Invalid use of IRQ 0
>ACPI: PCI Interrupt Link [LN12] (IRQs 3 4 5 7 9 11 12 14 15, disabled)
>pci_link-0249 [07] acpi_pci_link_get_curr: Invalid use of IRQ 0
>ACPI: PCI Interrupt Link [LN13] (IRQs 3 4 5 7 9 11 12 14 15, disabled)
>pci_link-0249 [07] acpi_pci_link_get_curr: Invalid use of IRQ 0
>ACPI: PCI Interrupt Link [LN14] (IRQs 3 4 5 7 9 11 12 14 15, disabled)
>pci_link-0249 [07] acpi_pci_link_get_curr: Invalid use of IRQ 0
>ACPI: PCI Interrupt Link [LN15] (IRQs 3 4 5 7 9 11 12 14 15, disabled)
>ACPI: PCI Interrupt Link [LNUS] (IRQs 10, disabled)
>block request queues:
> 128 requests per read queue
> 128 requests per write queue
> 8 requests per batch
> enter congestion at 31
> exit congestion at 33
>pci_link-0331 [03] acpi_pci_link_set     : Link disabled
>ACPI: PCI Interrupt Link [LN00] enabled at IRQ 0
>pci_link-0331 [03] acpi_pci_link_set     : Link disabled
>ACPI: PCI Interrupt Link [LN01] enabled at IRQ 0
>pci_link-0331 [03] acpi_pci_link_set     : Link disabled
>ACPI: PCI Interrupt Link [LN02] enabled at IRQ 0
>pci_link-0331 [03] acpi_pci_link_set     : Link disabled
>ACPI: PCI Interrupt Link [LN03] enabled at IRQ 0
>pci_link-0331 [03] acpi_pci_link_set     : Link disabled
>ACPI: PCI Interrupt Link [LN04] enabled at IRQ 0
>pci_link-0331 [03] acpi_pci_link_set     : Link disabled
>ACPI: PCI Interrupt Link [LN05] enabled at IRQ 0
>pci_link-0331 [03] acpi_pci_link_set     : Link disabled
>ACPI: PCI Interrupt Link [LN06] enabled at IRQ 0
>pci_link-0331 [03] acpi_pci_link_set     : Link disabled
>ACPI: PCI Interrupt Link [LN07] enabled at IRQ 0
>pci_link-0331 [03] acpi_pci_link_set     : Link disabled
>ACPI: PCI Interrupt Link [LN08] enabled at IRQ 0
>pci_link-0331 [03] acpi_pci_link_set     : Link disabled
>ACPI: PCI Interrupt Link [LN09] enabled at IRQ 0
>pci_link-0331 [03] acpi_pci_link_set     : Link disabled
>ACPI: PCI Interrupt Link [LN10] enabled at IRQ 0
>pci_link-0331 [03] acpi_pci_link_set     : Link disabled
>ACPI: PCI Interrupt Link [LN11] enabled at IRQ 0
>pci_link-0331 [03] acpi_pci_link_set     : Link disabled
>ACPI: PCI Interrupt Link [LN12] enabled at IRQ 0
>pci_link-0331 [03] acpi_pci_link_set     : Link disabled
>ACPI: PCI Interrupt Link [LN13] enabled at IRQ 0
>pci_link-0331 [03] acpi_pci_link_set     : Link disabled
>ACPI: PCI Interrupt Link [LN14] enabled at IRQ 0
>pci_link-0331 [03] acpi_pci_link_set     : Link disabled
>ACPI: PCI Interrupt Link [LN15] enabled at IRQ 0
>dsopcode-0497 [14] Ds_init_buffer_field  : Field size 72 exceeds Buffer size 48 (bits)
>pci_link-0320 [03] acpi_pci_link_set     : Error evaluating _SRS
>ACPI: PCI Interrupt Link [LNUS] enabled at IRQ 0
>pci_link-0484 [04] acpi_pci_link_get_irq : Link disabled
> pci_irq-0256 [03] acpi_pci_irq_lookup   : Invalid IRQ link routing entry
> pci_irq-0295 [03] acpi_pci_irq_derive   : Unable to derive IRQ for device 00:0f.2
>ACPI: No IRQ known for interrupt pin A of device 00:0f.2 - using IRQ 10
>PCI: Using ACPI for IRQ routing
>PCI: if you experience problems, try using option 'pci=noacpi' or even 'acpi=off'
>slab: reap timer started for cpu 0
>Starting kswapd
>aio_setup: sizeof(struct page) = 40
>[e7fb1020] eventpoll: driver installed.
>VFS: Disk quotas vdquot_6.5.1
>Journalled Block Device driver loaded
>devfs: v1.22 (20021013) Richard Gooch (rgooch-r1x6VkxMR+00zabcByZE4g@public.gmane.org)
>devfs: boot_options: 0x1
>Installing knfsd (copyright (C) 1996 okir-pn4DOG8n3UYbFoVRYvo4fw@public.gmane.org).
>Capability LSM initialized
>Initializing Cryptographic API
>ACPI: Power Button (FF) [PWRF]
>ACPI: Sleep Button (FF) [SLPF]
>acpi_processor-1365 [07] acpi_processor_get_thr: duty_cycle spans bit 4
>ACPI: Processor [CPU0] (supports C1)
>acpi_processor-1365 [07] acpi_processor_get_thr: duty_cycle spans bit 4
>ACPI: Processor [CPU1] (supports C1)
>Serial: 8250/16550 driver $Revision: 1.90 $ IRQ sharing disabled
>tts/0 at I/O 0x3f8 (irq = 4) is a 16550A
>tts/1 at I/O 0x2f8 (irq = 3) is a 16550A
>parport0: PC-style at 0x378 (0x778) [PCSPP,TRISTATE]
>parport0: irq 7 detected
>i2c-core.o: i2c core module version 2.6.4 (20020719)
>pty: 256 Unix98 ptys configured
>lp0: using parport0 (polling).
>Floppy drive(s): fd0 is 1.44M
>FDC 0 is a National Semiconductor PC87306
>RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize
>Intel(R) PRO/100 Network Driver - version 2.1.24-k2
>Copyright (c) 2002 Intel Corporation
>
>e100: eth0: Intel(R) 82559 Fast Ethernet LAN on Motherboard
>  Mem:0xfeafb000  IRQ:20  Speed:0 Mbps  Dx:N/A
>  Hardware receive checksums enabled
>  cpu cycle saver enabled
>
>Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
>ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
>PDC20267: IDE controller at PCI slot 00:03.0
>PDC20267: chipset revision 2
>PDC20267: not 100% native mode: will probe irqs later
>PDC20267: ROM enabled at 0xfea90000
>PDC20267: (U)DMA Burst Bit ENABLED Primary PCI Mode Secondary PCI Mode.
>    ide2: BM-DMA at 0xcf00-0xcf07, BIOS settings: hde:DMA, hdf:pio
>    ide3: BM-DMA at 0xcf08-0xcf0f, BIOS settings: hdg:DMA, hdh:pio
>hde: Maxtor 2R015H1, ATA DISK drive
>ide2 at 0xcff0-0xcff7,0xcfe6 on irq 16
>hdg: IC35L040AVER07-0, ATA DISK drive
>hdg: bad special flag: 0x03
>hdg: tagged command queueing enabled, command queue depth 8
>ide3 at 0xcfa8-0xcfaf,0xcfe2 on irq 16
>SvrWks OSB4: IDE controller at PCI slot 00:0f.1
>SvrWks OSB4: chipset revision 0
>SvrWks OSB4: not 100% native mode: will probe irqs later
>    ide0: BM-DMA at 0xffa0-0xffa7, BIOS settings: hda:pio, hdb:pio
>    ide1: BM-DMA at 0xffa8-0xffaf, BIOS settings: hdc:DMA, hdd:pio
>hde: host protected area => 1
>hde: 29297520 sectors (15000 MB) w/2048KiB Cache, CHS=29065/16/63, UDMA(100)
> /dev/ide/host2/bus0/target0/lun0: p1 p2 p3 p4 < p5 p6 p7 p8 >
>hdg: host protected area => 1
>hdg: 80418240 sectors (41174 MB) w/1916KiB Cache, CHS=79780/16/63, UDMA(100)
> /dev/ide/host2/bus1/target0/lun0:ide_tcq_intr_timeout: timeout waiting for completion interrupt
>hdg: invalidating tag queue (1 commands)
>hdg: status error: status=0x48 { DriveReady DataRequest }
>
>hdg: drive not ready for command
>hdg: status error: status=0x48 { DriveReady DataRequest }
>
>hdg: drive not ready for command
> p1 p2 < p5 p6 p7 p8 p9 p10 p11 p12 >
>SCSI subsystem driver Revision: 1.00
>request_module[scsi_hostadapter]: not ready
>mice: PS/2 mouse device common for all mice
>input: ImPS/2 Logitech Wheel Mouse on isa0060/serio1
>serio: i8042 AUX port at 0x60,0x64 irq 12
>input: AT Set 2 keyboard on isa0060/serio0
>serio: i8042 KBD port at 0x60,0x64 irq 1
>i2c-core.o: i2c core module version 2.6.4 (20020719)
>NET4: Linux TCP/IP 1.0 for NET4.0
>IP: routing cache hash table of 8192 buckets, 64Kbytes
>TCP: Hash tables configured (established 262144 bind 65536)
>NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
>VFS: Cannot open root device "805" or 08:05
>Please append a correct "root=" boot option
>Kernel panic: VFS: Unable to mount root fs on 08:05
> <0>Rebooting in 30 seconds..
>  
>


[-- Attachment #2: Type: text/html, Size: 17059 bytes --]