* Re: ACPI 20020829 and kernel 2.4.19-4GB #1 Fri Sep 13 13:14:56 UTC 2002 i686 on Gericom Supersonic M6T
@ 2002-11-22 10:49 joerg.beyer-htSm2yLGOjU
0 siblings, 0 replies; 3+ messages in thread
From: joerg.beyer-htSm2yLGOjU @ 2002-11-22 10:49 UTC (permalink / raw)
To: acpi
mariuso-QShcZ35DvxU@public.gmane.org schrieb am 22.11.02 11:36:20:
> Hi, I have an Gericom M6T and I just installed SuSE 8.1.
>
> If u add pci=acpi to the bootparam, acpi is working nearly acceptable :
> - acpi events are not raported anymore
> - when i start /stop acpid (at the time of acpi modules insertion) the
> complete system crash
...
> So, hopefully somebody in this list has a patch for the SuSE 8.1
> kernel. The most stable acpi for Gericom Supersonic M6T is acpi-20020918.
>
> Should I address this question to another list ?
I would address this to SuSE.
yours
Joerg
-------------------------------------------------------
This sf.net email is sponsored by:ThinkGeek
Welcome to geek heaven.
http://thinkgeek.com/sf
^ permalink raw reply [flat|nested] 3+ messages in thread
* Re: ACPI 20020829 and kernel 2.4.19-4GB #1 Fri Sep 13 13:14:56 UTC 2002 i686 on Gericom Supersonic M6T
[not found] ` <3DDE91EC.2090207-db4prxYhZ5Fhl2p70BpVqQ@public.gmane.org>
@ 2002-11-22 11:33 ` Maier Gerfried
0 siblings, 0 replies; 3+ messages in thread
From: Maier Gerfried @ 2002-11-22 11:33 UTC (permalink / raw)
To: mariuso-QShcZ35DvxU; +Cc: acpi-devel-5NWGOfrQmneRv+LV9MX5uipxlwaOVQ5f
Hi Marius!
Zitiere Marius Oancea <mariuso-db4prxYhZ5Fhl2p70BpVqQ@public.gmane.org>:
> Hi, I have an Gericom M6T and I just installed SuSE 8.1.
>
> If u add pci=acpi to the bootparam, acpi is working nearly acceptable :
> - acpi events are not raported anymore
> - when i start /stop acpid (at the time of acpi modules insertion) the
> complete system crash
... completely the same issue on my Suse 8.1 (Acer Travelmate Notebook)
> I tried to compile a original 2.4.19 kernel (from kernel.org) and
> patch this kernel with acpi-20020918-2.4.19.diff.
Why didn't you try a more recent kernel+acpi-patch?
I'm now using 2.4.20-rc1 with the recent acpi-patch and ererything works fine.
(I first installed the Suse-kernel-sources and then copied the .config-file
into the new 2.4.20-rc1-tree - make menuconfig - make bzimage and so on.)
I had no major problems with this.
> After that, acpi is working very well, but ... I don't have the exotic
> features of SuSE anymore (PCMCIA driver is not the last one and is not
> stable enough, SuSE hardware autodetection is not working too .... ,
> grub, orinocco wireless card neither).
Did you configure the kernel yourself? The Suse Kernel has the option "prompt
for development options" (One of the first options when you do make menuconfig
or make xconfig - Unfortunately I do not know the exact name any more) enabled.
This allows you to select drivers/modules marked as "(EXPERIMENTAL)", eg.
FireWire, Bluetooth, I thonk WLan too, and so on.
> So, hopefully somebody in this list has a patch for the SuSE 8.1
> kernel. The most stable acpi for Gericom Supersonic M6T is
> acpi-20020918.
>
> Should I address this question to another list ?
>
> If yes, on wich list ?
>
> With all my respect
> Marius OANCEA
If you need some help updating the kernel, please feel free and mail me
directly.
Gerfried
-------------------------------------------------------
This sf.net email is sponsored by:ThinkGeek
Welcome to geek heaven.
http://thinkgeek.com/sf
^ permalink raw reply [flat|nested] 3+ messages in thread
* ACPI 20020829 and kernel 2.4.19-4GB #1 Fri Sep 13 13:14:56 UTC 2002 i686 on Gericom Supersonic M6T
@ 2002-11-22 20:22 Marius Oancea
[not found] ` <3DDE91EC.2090207-db4prxYhZ5Fhl2p70BpVqQ@public.gmane.org>
0 siblings, 1 reply; 3+ messages in thread
From: Marius Oancea @ 2002-11-22 20:22 UTC (permalink / raw)
To: acpi
Hi, I have an Gericom M6T and I just installed SuSE 8.1.
If u add pci=acpi to the bootparam, acpi is working nearly acceptable :
- acpi events are not raported anymore
- when i start /stop acpid (at the time of acpi modules insertion) the
complete system crash
I tried to compile a original 2.4.19 kernel (from kernel.org) and
patch this kernel with acpi-20020918-2.4.19.diff.
After that, acpi is working very well, but ... I don't have the exotic
features of SuSE anymore (PCMCIA driver is not the last one and is not
stable enough, SuSE hardware autodetection is not working too .... ,
grub, orinocco wireless card neither).
So, hopefully somebody in this list has a patch for the SuSE 8.1
kernel. The most stable acpi for Gericom Supersonic M6T is acpi-20020918.
Should I address this question to another list ?
If yes, on wich list ?
With all my respect
Marius OANCEA
-------------------------------------------------------
This sf.net email is sponsored by:ThinkGeek
Welcome to geek heaven.
http://thinkgeek.com/sf
^ permalink raw reply [flat|nested] 3+ messages in thread
end of thread, other threads:[~2002-11-22 20:22 UTC | newest]
Thread overview: 3+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2002-11-22 20:22 ACPI 20020829 and kernel 2.4.19-4GB #1 Fri Sep 13 13:14:56 UTC 2002 i686 on Gericom Supersonic M6T Marius Oancea
[not found] ` <3DDE91EC.2090207-db4prxYhZ5Fhl2p70BpVqQ@public.gmane.org>
2002-11-22 11:33 ` Maier Gerfried
-- strict thread matches above, loose matches on Subject: below --
2002-11-22 10:49 joerg.beyer-htSm2yLGOjU
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox