From: Alvaro Lopes <alvieboy-JkNoWtNHh5AAvxtiuMwx3w@public.gmane.org>
To: acpi-devel-5NWGOfrQmneRv+LV9MX5uipxlwaOVQ5f@public.gmane.org
Subject: ACPI PCI bus mismatch ?
Date: Wed, 05 Feb 2003 16:36:24 +0000 [thread overview]
Message-ID: <3E413D88.2020001@alvie.com> (raw)
Hi all
I was debugging ACPI in my laptop and was comparing 2.4.18 against
latest 2.4.19pre4-ac1+acpi, when I found this:
There's a method in my DSTD that looks like this:
Method (_L08, 0, Serialized)
{
Store (\_SB.PCI0.PCIB.BRGB, Local0)
ShiftLeft (Local0, 0x18, Local0)
Or (Local0, 0x0020B10B, Local0)
Store (0xAF, \_SB.MEM.IEDI)
.
.
.
When it runs on 2.4.18, I can see it working almost properly. I debugged
exregion and this was the result, with my comments:
Feb 5 16:18:09 supernova kernel: exregion-0353 [25]
Ex_pci_config_space_ha: Pci_config 0 (8) Seg(0000) Bus(0000) Dev(001e)
Func(0000) Reg(0019)
This one is reading \_SB.PCI0.PCIB.BRGB, device 0x1e @ bus #0,
which according to lspci, is my PCI bridge (which is correct):
00:1e.0 PCI bridge: Intel Corp. 82820 820 (Camino 2) Chipset PCI
(-M) (rev 42)
But, when I boot 2.4.20pre4-ac1+acpi, the handler instead of using Bus
#0, uses Bus #2:
Feb 5 16:25:28 supernova kernel: exregion-0352 [25]
ex_pci_config_space_ha: pci_config 0 (8) Seg(0000) Bus(0002) Dev(001e)
Func(0000) Reg(0019)
.... and always reads 0xFF.
lspci with 2.4.20pre4-ac1+acpi is:
alvieboy@supernova:~$ uname -a
Linux supernova 2.4.21-pre4-ac1 #2 SMP Ter Fev 4 12:18:03 WET 2003 i686
unknown unknown GNU/Linux
alvieboy@supernova:~$ lspci
00:00.0 Host bridge: Intel Corp. 82845 845 (Brookdale) Chipset Host
Bridge (rev 05)
00:01.0 PCI bridge: Intel Corp. 82845 845 (Brookdale) Chipset AGP Bridge
(rev 05)
00:1d.0 USB Controller: Intel Corp.: Unknown device 2482 (rev 02)
00:1d.1 USB Controller: Intel Corp.: Unknown device 2484 (rev 02)
00:1e.0 PCI bridge: Intel Corp. 82820 820 (Camino 2) Chipset PCI (-M)
(rev 42)
00:1f.0 ISA bridge: Intel Corp.: Unknown device 248c (rev 02)
00:1f.1 IDE interface: Intel Corp.: Unknown device 248a (rev 02)
00:1f.5 Multimedia audio controller: Intel Corp. AC'97 Audio Controller
(rev 02)
00:1f.6 Modem: Intel Corp.: Unknown device 2486 (rev 02)
01:00.0 VGA compatible controller: nVidia Corporation: Unknown device
0175 (rev a3)
02:08.0 Ethernet controller: Intel Corp. 82801CAM (ICH3) Chipset
Ethernet Controller (rev 42)
02:0b.0 CardBus bridge: Toshiba America Info Systems ToPIC95 PCI to
Cardbus Bridge with ZV Support (rev 32)
02:0b.1 CardBus bridge: Toshiba America Info Systems ToPIC95 PCI to
Cardbus Bridge with ZV Support (rev 32)
Anyone sees which might me causing this ?
TYA
--
Álvaro Lopes
---------------------
A .sig is just a .sig
-------------------------------------------------------
This SF.NET email is sponsored by:
SourceForge Enterprise Edition + IBM + LinuxWorld = Something 2 See!
http://www.vasoftware.com
next reply other threads:[~2003-02-05 16:36 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2003-02-05 16:36 Alvaro Lopes [this message]
[not found] ` <3E413D88.2020001-JkNoWtNHh5AAvxtiuMwx3w@public.gmane.org>
2003-02-06 12:07 ` ACPI PCI bus mismatch ? Alvaro Lopes
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=3E413D88.2020001@alvie.com \
--to=alvieboy-jknowtnhh5aavxtiumwx3w@public.gmane.org \
--cc=acpi-devel-5NWGOfrQmneRv+LV9MX5uipxlwaOVQ5f@public.gmane.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox