Re: Compaq EVO N110, bad state handling?

["Zdeněk OGAR Skalák" <skalak-Bh/+Xfn7orxQjibfaplwYw@public.gmane.org>]

Hi,

> Hi,
> i didn't recieve answer in acpi-support so i'm trying to send mail here to devel
> list.
> 
> I have Compaq EVO N110, i compiled 2.4.21-pre6 with acpi for this kernel. I can
> read info about battery, CPU etc. but state file shows bad values.
> 
> When i try to read state of battery at first time it shows probably good value.
> But when i try to read it one more time there is crazy value (ten time more
> then capacity of my battery) which decreases very quickly and when it reaches
> zero value it returns to some crazy high value and the fast decreasing repeats.
> That all the time.

	I had the same behaviour on Compaq ARMADA 110. You can search this list for
mail from me with title Armada 110, examine if it is applicable & try to repair
it yourself :-). Or you could send me your dsdt (cat /proc/acpi/dsdt > dsdt.dat)
& I'll have a look.

> CPU stat shows 50C all the time and it is not possible. (it shows 50C even if my
> fan rotates, according to my BIOS my fan turns on when temperature get over
> 76C).

	This thing I didn't care :-{

> Does it exist some solution of this problem or do i have to wait for some next
> version of your kernel patch?

	Sure, solution exist, but you have to repair yourself (or find somebody to do
it for you :-)

	Bye
		Zdenek OGAR Skalak

-- 
Ing. Zdeněk OGAR Skalák
Monet+ a.s.
Zámecká 365
763 14 Zlín - Štípa, CZ
Tel: +420 / 577 110 411,  Fax: +420 / 577 914 557


-------------------------------------------------------
This sf.net email is sponsored by:ThinkGeek
Welcome to geek heaven.
http://thinkgeek.com/sf