Re: presario 1505us battery not found

[Richard Black <richard.black-VXdhtT5mjnY@public.gmane.org>]

Have you tried booting with no AC power connected?

Sincerely,
Richard Black

Abheek Anand wrote:

>Hi,
>
>After quite a bit of tinkering with my presario 1505us, I managed to get most
>of what I need up and working. Currently im using linux 2.5.67 with
>acpi-20030328. I am able to get ac-adaptor information, and the LID works
>fine. However, I am unable to get acpi to recognize my battery, which it
>always shows as absent. I have looked at several people's suggestions on this
>on the mailing list, but none of them work for me.
>
>I'm including a copy of the dmesg messages my system spews out. I also did the
>usual dsdt disassemble, fix, and include in kernel routine. I have put up my
>original (and fixed) dsdt on http://www.cs.umd.edu/~abheek/acpi . My
>/proc/acpi/battery/BAT1 entries show the battery as absent.
>
>Any help would be _very_ appreciated.
>
>Thanks,
>Abheek
>
>
>----- dmesg <snip> ----
>
>Linux version 2.5.67 (root-c5qLw1b7B3dFcdTHL1IdjYdd74u8MsAO@public.gmane.org) (gcc version 3.2.2 20030222 (Red Hat Linux 3.2.2-5)) #6 Thu Apr 24 13:45:50 EDT 2003
>Video mode to be used for restore is ffff
>BIOS-provided physical RAM map:
> BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
> BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
> BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
> BIOS-e820: 0000000000100000 - 000000000ffd0000 (usable)
> BIOS-e820: 000000000ffd0000 - 000000000fff0c00 (reserved)
> BIOS-e820: 000000000fff0c00 - 000000000fffc000 (ACPI NVS)
> BIOS-e820: 000000000fffc000 - 0000000010000000 (reserved)
>255MB LOWMEM available.
>On node 0 totalpages: 65488
>  DMA zone: 4096 pages, LIFO batch:1
>  Normal zone: 61392 pages, LIFO batch:14
>  HighMem zone: 0 pages, LIFO batch:1
>ACPI: RSDP (v000 COMPAQ                     ) @ 0x000f9970
>ACPI: RSDT (v001 COMPAQ CPQ004A  09478.00544) @ 0x0fff0c84
>ACPI: FADT (v002 COMPAQ CPQ004A  00000.00002) @ 0x0fff0c00
>ACPI: SSDT (v001 COMPAQ CPQCrP4C 00000.04097) @ 0x0fff6637
>ACPI: DSDT (v001 COMPAQ  EVON800 00001.00000) @ 0x00000000
>ACPI: BIOS passes blacklist
>Building zonelist for node : 0
>Kernel command line: ro root=/dev/hda3 hdc=ide-scsi pci=noacpi
>ide_setup: hdc=ide-scsi
>Initializing CPU#0
>PID hash table entries: 1024 (order 10: 8192 bytes)
>Detected 1594.399 MHz processor.
>Console: colour VGA+ 80x25
>Calibrating delay loop... 3145.72 BogoMIPS
>Memory: 254948k/261952k available (2392k kernel code, 6292k reserved, 963k data, 132k init, 0k highmem)
>Dentry cache hash table entries: 32768 (order: 5, 131072 bytes)
>Inode-cache hash table entries: 16384 (order: 4, 65536 bytes)
>Mount-cache hash table entries: 512 (order: 0, 4096 bytes)
>-> /dev
>-> /dev/console
>-> /root
>CPU: Trace cache: 12K uops, L1 D cache: 8K
>CPU: L2 cache: 512K
>CPU:     After generic, caps: 3febf9ff 00000000 00000000 00000000
>Intel machine check architecture supported.
>Intel machine check reporting enabled on CPU#0.
>CPU#0: Intel P4/Xeon Extended MCE MSRs (12) available
>CPU: Intel(R) Pentium(R) 4 CPU 1.60GHz stepping 04
>Enabling fast FPU save and restore... done.
>Enabling unmasked SIMD FPU exception support... done.
>Checking 'hlt' instruction... OK.
>POSIX conformance testing by UNIFIX
>Initializing RT netlink socket
>mtrr: v2.0 (20020519)
>PCI: BIOS32 entry (0xc00f0000) in high memory, cannot use.
>PCI: Using configuration type 1
>BIO: pool of 256 setup, 15Kb (60 bytes/bio)
>biovec pool[0]:   1 bvecs: 256 entries (12 bytes)
>biovec pool[1]:   4 bvecs: 256 entries (48 bytes)
>biovec pool[2]:  16 bvecs: 256 entries (192 bytes)
>biovec pool[3]:  64 bvecs: 256 entries (768 bytes)
>biovec pool[4]: 128 bvecs: 256 entries (1536 bytes)
>biovec pool[5]: 256 bvecs: 256 entries (3072 bytes)
>ACPI: Subsystem revision 20030328
>   tbget-0292: *** Info: Table [DSDT] replaced by host OS
> tbxface-0117 [03] acpi_load_tables      : ACPI Tables successfully acquired
>Parsing all Control Methods:...................................................................................................................................................................................................................................................
>Table [DSDT] - 784 Objects with 88 Devices 243 Methods 24 Regions
>Parsing all Control Methods:
>Table [SSDT] - 0 Objects with 0 Devices 0 Methods 0 Regions
>ACPI Namespace successfully loaded at root c04795dc
>evxfevnt-0093 [04] acpi_enable           : Transition to ACPI mode successful
>evgpeblk-0731 [06] ev_create_gpe_block   : GPE Block: [_GPE] 2 registers at 0000000000001028 on interrupt 9
>evgpeblk-0736 [06] ev_create_gpe_block   : GPE Block defined as GPE 0x00 to GPE 0x0F
>evgpeblk-0262 [07] ev_save_method_info   : Registered GPE method _L0B as GPE number 0x0B
>evgpeblk-0731 [06] ev_create_gpe_block   : GPE Block: [_GPE] 2 registers at 000000000000102C on interrupt 9
>evgpeblk-0736 [06] ev_create_gpe_block   : GPE Block defined as GPE 0x10 to GPE 0x1F
>evgpeblk-0262 [07] ev_save_method_info   : Registered GPE method _L11 as GPE number 0x11
>evgpeblk-0262 [07] ev_save_method_info   : Registered GPE method _L13 as GPE number 0x13
>evgpeblk-0262 [07] ev_save_method_info   : Registered GPE method _L14 as GPE number 0x14
>evgpeblk-0262 [07] ev_save_method_info   : Registered GPE method _L15 as GPE number 0x15
>evgpeblk-0262 [07] ev_save_method_info   : Registered GPE method _L17 as GPE number 0x17
>evgpeblk-0262 [07] ev_save_method_info   : Registered GPE method _L18 as GPE number 0x18
>evgpeblk-0262 [07] ev_save_method_info   : Registered GPE method _L1C as GPE number 0x1C
>Executing all Device _STA and_INI methods:...evrgnini-0261: *** Error: Could not install pci_config handler for C03B, AE_ALREADY_EXISTS
>....evrgnini-0261: *** Error: Could not install pci_config handler for C03B, AE_ALREADY_EXISTS
>....................evregion-0254 [22] ev_address_space_dispa: no handler for region(cff6d3a8) [EmbeddedControl]
> exfldio-0235 [21] ex_access_region      : Region EmbeddedControl(3) has no handler
>evregion-0254 [22] ev_address_space_dispa: no handler for region(cff6d3a8) [EmbeddedControl]
> exfldio-0235 [21] ex_access_region      : Region EmbeddedControl(3) has no handler
> psparse-1121: *** Error: Method execution failed [\_SB_.C03B.C04E.C0CF.C0D3] (Node cff6c728), AE_NOT_EXIST
> psparse-1121: *** Error: Method execution failed [\_SB_.C03B.C04E.C0CF._INI] (Node cff696a8), AE_NOT_EXIST
>  nsinit-0397 [06] ns_init_one_device    : \_SB_.C03B.C04E.C0CF._INI failed: AE_NOT_EXIST
>.........................................evrgnini-0261: *** Error: Could not install pci_config handler for C03B, AE_ALREADY_EXISTS
>.......................
>91 Devices found containing: 91 _STA, 4 _INI methods
>Completing Region/Field/Buffer/Package initialization:.................................................................................................
>Initialized 14/24 Regions 0/0 Fields 25/26 Buffers 58/67 Packages (835 nodes)
>ACPI: Interpreter enabled
>ACPI: Using PIC for interrupt routing
>ACPI: PCI Root Bridge [C03B] (00:00)
>PCI: Probing PCI hardware (bus 00)
>Transparent bridge - Intel Corp. 82801BAM/CAM PCI Bri
>ACPI: PCI Interrupt Routing Table [\_SB_.C03B._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.C03B.C03C._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.C03B.C04D._PRT]
>ACPI: Embedded Controller [C0CF] (gpe 29)
>ACPI: Power Resource [C142] (off)
>ACPI: Power Resource [C156] (off)
>ACPI: Power Resource [C15A] (off)
>ACPI: Power Resource [C15E] (off)
>ACPI: Power Resource [C167] (on)
>ACPI: PCI Interrupt Link [C0B5] (IRQs 5 10 *11)
>ACPI: PCI Interrupt Link [C0B6] (IRQs *5 10 11)
>ACPI: PCI Interrupt Link [C0B7] (IRQs 5 10 *11)
>ACPI: PCI Interrupt Link [C0B8] (IRQs 5 10 *11)
>ACPI: PCI Interrupt Link [C0B9] (IRQs 5 *10 11)
>pci_link-0110 [25] acpi_pci_link_check_po: Blank IRQ resource
>ACPI: PCI Interrupt Link [C0BA] (IRQs, disabled)
>pci_link-0110 [26] acpi_pci_link_check_po: Blank IRQ resource
>ACPI: PCI Interrupt Link [C0BB] (IRQs, disabled)
>pci_link-0110 [27] acpi_pci_link_check_po: Blank IRQ resource
>ACPI: PCI Interrupt Link [C0BC] (IRQs, disabled)
>ACPI: Power Resource [C0CE] (on)
>ACPI: Power Resource [C1D3] (off)
>ACPI: Power Resource [C1D4] (off)
>ACPI: Power Resource [C1D5] (off)
>ACPI: Power Resource [C1D6] (off)
>ACPI: Power Resource [C1E1] (off)
>ACPI: Power Resource [C1E2] (off)
>ACPI: Power Resource [C1E3] (off)
>Linux Plug and Play Support v0.96 (c) Adam Belay
>PnPBIOS: Scanning system for PnP BIOS support...
>PnPBIOS: Found PnP BIOS installation structure at 0xc00f2e20
>PnPBIOS: PnP BIOS version 1.0, entry 0xf0000:0x2e4e, dseg 0xf0000
>PnPBIOS: 16 nodes reported by PnP BIOS; 16 recorded by driver
>block request queues:
> 128 requests per read queue
> 128 requests per write queue
> 8 requests per batch
> enter congestion at 15
> exit congestion at 17
>Linux Kernel Card Services 3.1.22
>  options:  [pci] [cardbus] [pm]
>PCI: Probing PCI hardware
>PCI: Using IRQ router PIIX [8086/248c] at 00:1f.0
>cpufreq: Intel(R) SpeedStep(TM) for this processor not (yet) available.
>cpufreq: P4/Xeon(TM) CPU On-Demand Clock Modulation available
>Enabling SEP on CPU 0
>Journalled Block Device driver loaded
>Installing knfsd (copyright (C) 1996 okir-pn4DOG8n3UYbFoVRYvo4fw@public.gmane.org).
>udf: registering filesystem
>ACPI: AC Adapter [ACAD] (off-line)
>ACPI: Battery Slot [BAT1] (battery absent)   
>ACPI: Power Button (FF) [PWRF]
>ACPI: Sleep Button (CM) [SLPB]
>ACPI: Lid Switch [LID]
>ACPI: Fan [C1D7] (off)
>ACPI: Fan [C1D8] (off)
>ACPI: Fan [C1D9] (off)
>ACPI: Fan [C1DA] (off)
>ACPI: Processor [C000] (supports C1 C2 C3, 8 throttling states)
>[ACPI Debug] Integer: 0000000000000E62
>[ACPI Debug] Integer: 0000000000000DFE
>[ACPI Debug] Integer: 0000000000000D9A
>[ACPI Debug] Integer: 0000000000000D36
>[ACPI Debug] Integer: 0000000000000CD2
>ACPI: Thermal Zone [TZ1] (32 C)
>[ACPI Debug] Integer: 0000000000000DFE
>[ACPI Debug] Integer: 0000000000000D68
>[ACPI Debug] Integer: 0000000000000D04
>[ACPI Debug] Integer: 0000000000000CA0
>ACPI: Thermal Zone [TZ2] (28 C)
>[ACPI Debug] Integer: 0000000000000CD2
>ACPI: Thermal Zone [TZ3] (27 C)
>
>----- </snip> ------
>
>
>-------------------------------------------------------
>This sf.net email is sponsored by:ThinkGeek
>Welcome to geek heaven.
>http://thinkgeek.com/sf
>_______________________________________________
>Acpi-devel mailing list
>Acpi-devel-5NWGOfrQmneRv+LV9MX5uipxlwaOVQ5f@public.gmane.org
>https://lists.sourceforge.net/lists/listinfo/acpi-devel
>  
>




-------------------------------------------------------
This sf.net email is sponsored by:ThinkGeek
Welcome to geek heaven.
http://thinkgeek.com/sf