From mboxrd@z Thu Jan 1 00:00:00 1970 From: Richard Black Subject: Re: presario 1505us battery not found Date: Fri, 25 Apr 2003 15:53:17 -0500 Sender: acpi-devel-admin-5NWGOfrQmneRv+LV9MX5uipxlwaOVQ5f@public.gmane.org Message-ID: <3EA9A03D.2000507@hp.com> References: <20030424194943.GB25389@cs.umd.edu> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii; format=flowed Content-Transfer-Encoding: 7bit Return-path: Errors-To: acpi-devel-admin-5NWGOfrQmneRv+LV9MX5uipxlwaOVQ5f@public.gmane.org List-Help: List-Post: List-Subscribe: , List-Unsubscribe: , List-Archive: To: acpi-devel-5NWGOfrQmneRv+LV9MX5uipxlwaOVQ5f@public.gmane.org List-Id: linux-acpi@vger.kernel.org Have you tried booting with no AC power connected? Sincerely, Richard Black Abheek Anand wrote: >Hi, > >After quite a bit of tinkering with my presario 1505us, I managed to get most >of what I need up and working. Currently im using linux 2.5.67 with >acpi-20030328. I am able to get ac-adaptor information, and the LID works >fine. However, I am unable to get acpi to recognize my battery, which it >always shows as absent. I have looked at several people's suggestions on this >on the mailing list, but none of them work for me. > >I'm including a copy of the dmesg messages my system spews out. I also did the >usual dsdt disassemble, fix, and include in kernel routine. I have put up my >original (and fixed) dsdt on http://www.cs.umd.edu/~abheek/acpi . My >/proc/acpi/battery/BAT1 entries show the battery as absent. > >Any help would be _very_ appreciated. > >Thanks, >Abheek > > >----- dmesg ---- > >Linux version 2.5.67 (root-c5qLw1b7B3dFcdTHL1IdjYdd74u8MsAO@public.gmane.org) (gcc version 3.2.2 20030222 (Red Hat Linux 3.2.2-5)) #6 Thu Apr 24 13:45:50 EDT 2003 >Video mode to be used for restore is ffff >BIOS-provided physical RAM map: > BIOS-e820: 0000000000000000 - 000000000009fc00 (usable) > BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved) > BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved) > BIOS-e820: 0000000000100000 - 000000000ffd0000 (usable) > BIOS-e820: 000000000ffd0000 - 000000000fff0c00 (reserved) > BIOS-e820: 000000000fff0c00 - 000000000fffc000 (ACPI NVS) > BIOS-e820: 000000000fffc000 - 0000000010000000 (reserved) >255MB LOWMEM available. >On node 0 totalpages: 65488 > DMA zone: 4096 pages, LIFO batch:1 > Normal zone: 61392 pages, LIFO batch:14 > HighMem zone: 0 pages, LIFO batch:1 >ACPI: RSDP (v000 COMPAQ ) @ 0x000f9970 >ACPI: RSDT (v001 COMPAQ CPQ004A 09478.00544) @ 0x0fff0c84 >ACPI: FADT (v002 COMPAQ CPQ004A 00000.00002) @ 0x0fff0c00 >ACPI: SSDT (v001 COMPAQ CPQCrP4C 00000.04097) @ 0x0fff6637 >ACPI: DSDT (v001 COMPAQ EVON800 00001.00000) @ 0x00000000 >ACPI: BIOS passes blacklist >Building zonelist for node : 0 >Kernel command line: ro root=/dev/hda3 hdc=ide-scsi pci=noacpi >ide_setup: hdc=ide-scsi >Initializing CPU#0 >PID hash table entries: 1024 (order 10: 8192 bytes) >Detected 1594.399 MHz processor. >Console: colour VGA+ 80x25 >Calibrating delay loop... 3145.72 BogoMIPS >Memory: 254948k/261952k available (2392k kernel code, 6292k reserved, 963k data, 132k init, 0k highmem) >Dentry cache hash table entries: 32768 (order: 5, 131072 bytes) >Inode-cache hash table entries: 16384 (order: 4, 65536 bytes) >Mount-cache hash table entries: 512 (order: 0, 4096 bytes) >-> /dev >-> /dev/console >-> /root >CPU: Trace cache: 12K uops, L1 D cache: 8K >CPU: L2 cache: 512K >CPU: After generic, caps: 3febf9ff 00000000 00000000 00000000 >Intel machine check architecture supported. >Intel machine check reporting enabled on CPU#0. >CPU#0: Intel P4/Xeon Extended MCE MSRs (12) available >CPU: Intel(R) Pentium(R) 4 CPU 1.60GHz stepping 04 >Enabling fast FPU save and restore... done. >Enabling unmasked SIMD FPU exception support... done. >Checking 'hlt' instruction... OK. >POSIX conformance testing by UNIFIX >Initializing RT netlink socket >mtrr: v2.0 (20020519) >PCI: BIOS32 entry (0xc00f0000) in high memory, cannot use. >PCI: Using configuration type 1 >BIO: pool of 256 setup, 15Kb (60 bytes/bio) >biovec pool[0]: 1 bvecs: 256 entries (12 bytes) >biovec pool[1]: 4 bvecs: 256 entries (48 bytes) >biovec pool[2]: 16 bvecs: 256 entries (192 bytes) >biovec pool[3]: 64 bvecs: 256 entries (768 bytes) >biovec pool[4]: 128 bvecs: 256 entries (1536 bytes) >biovec pool[5]: 256 bvecs: 256 entries (3072 bytes) >ACPI: Subsystem revision 20030328 > tbget-0292: *** Info: Table [DSDT] replaced by host OS > tbxface-0117 [03] acpi_load_tables : ACPI Tables successfully acquired >Parsing all Control Methods:................................................................................................................................................................................................................................................... >Table [DSDT] - 784 Objects with 88 Devices 243 Methods 24 Regions >Parsing all Control Methods: >Table [SSDT] - 0 Objects with 0 Devices 0 Methods 0 Regions >ACPI Namespace successfully loaded at root c04795dc >evxfevnt-0093 [04] acpi_enable : Transition to ACPI mode successful >evgpeblk-0731 [06] ev_create_gpe_block : GPE Block: [_GPE] 2 registers at 0000000000001028 on interrupt 9 >evgpeblk-0736 [06] ev_create_gpe_block : GPE Block defined as GPE 0x00 to GPE 0x0F >evgpeblk-0262 [07] ev_save_method_info : Registered GPE method _L0B as GPE number 0x0B >evgpeblk-0731 [06] ev_create_gpe_block : GPE Block: [_GPE] 2 registers at 000000000000102C on interrupt 9 >evgpeblk-0736 [06] ev_create_gpe_block : GPE Block defined as GPE 0x10 to GPE 0x1F >evgpeblk-0262 [07] ev_save_method_info : Registered GPE method _L11 as GPE number 0x11 >evgpeblk-0262 [07] ev_save_method_info : Registered GPE method _L13 as GPE number 0x13 >evgpeblk-0262 [07] ev_save_method_info : Registered GPE method _L14 as GPE number 0x14 >evgpeblk-0262 [07] ev_save_method_info : Registered GPE method _L15 as GPE number 0x15 >evgpeblk-0262 [07] ev_save_method_info : Registered GPE method _L17 as GPE number 0x17 >evgpeblk-0262 [07] ev_save_method_info : Registered GPE method _L18 as GPE number 0x18 >evgpeblk-0262 [07] ev_save_method_info : Registered GPE method _L1C as GPE number 0x1C >Executing all Device _STA and_INI methods:...evrgnini-0261: *** Error: Could not install pci_config handler for C03B, AE_ALREADY_EXISTS >....evrgnini-0261: *** Error: Could not install pci_config handler for C03B, AE_ALREADY_EXISTS >....................evregion-0254 [22] ev_address_space_dispa: no handler for region(cff6d3a8) [EmbeddedControl] > exfldio-0235 [21] ex_access_region : Region EmbeddedControl(3) has no handler >evregion-0254 [22] ev_address_space_dispa: no handler for region(cff6d3a8) [EmbeddedControl] > exfldio-0235 [21] ex_access_region : Region EmbeddedControl(3) has no handler > psparse-1121: *** Error: Method execution failed [\_SB_.C03B.C04E.C0CF.C0D3] (Node cff6c728), AE_NOT_EXIST > psparse-1121: *** Error: Method execution failed [\_SB_.C03B.C04E.C0CF._INI] (Node cff696a8), AE_NOT_EXIST > nsinit-0397 [06] ns_init_one_device : \_SB_.C03B.C04E.C0CF._INI failed: AE_NOT_EXIST >.........................................evrgnini-0261: *** Error: Could not install pci_config handler for C03B, AE_ALREADY_EXISTS >....................... >91 Devices found containing: 91 _STA, 4 _INI methods >Completing Region/Field/Buffer/Package initialization:................................................................................................. >Initialized 14/24 Regions 0/0 Fields 25/26 Buffers 58/67 Packages (835 nodes) >ACPI: Interpreter enabled >ACPI: Using PIC for interrupt routing >ACPI: PCI Root Bridge [C03B] (00:00) >PCI: Probing PCI hardware (bus 00) >Transparent bridge - Intel Corp. 82801BAM/CAM PCI Bri >ACPI: PCI Interrupt Routing Table [\_SB_.C03B._PRT] >ACPI: PCI Interrupt Routing Table [\_SB_.C03B.C03C._PRT] >ACPI: PCI Interrupt Routing Table [\_SB_.C03B.C04D._PRT] >ACPI: Embedded Controller [C0CF] (gpe 29) >ACPI: Power Resource [C142] (off) >ACPI: Power Resource [C156] (off) >ACPI: Power Resource [C15A] (off) >ACPI: Power Resource [C15E] (off) >ACPI: Power Resource [C167] (on) >ACPI: PCI Interrupt Link [C0B5] (IRQs 5 10 *11) >ACPI: PCI Interrupt Link [C0B6] (IRQs *5 10 11) >ACPI: PCI Interrupt Link [C0B7] (IRQs 5 10 *11) >ACPI: PCI Interrupt Link [C0B8] (IRQs 5 10 *11) >ACPI: PCI Interrupt Link [C0B9] (IRQs 5 *10 11) >pci_link-0110 [25] acpi_pci_link_check_po: Blank IRQ resource >ACPI: PCI Interrupt Link [C0BA] (IRQs, disabled) >pci_link-0110 [26] acpi_pci_link_check_po: Blank IRQ resource >ACPI: PCI Interrupt Link [C0BB] (IRQs, disabled) >pci_link-0110 [27] acpi_pci_link_check_po: Blank IRQ resource >ACPI: PCI Interrupt Link [C0BC] (IRQs, disabled) >ACPI: Power Resource [C0CE] (on) >ACPI: Power Resource [C1D3] (off) >ACPI: Power Resource [C1D4] (off) >ACPI: Power Resource [C1D5] (off) >ACPI: Power Resource [C1D6] (off) >ACPI: Power Resource [C1E1] (off) >ACPI: Power Resource [C1E2] (off) >ACPI: Power Resource [C1E3] (off) >Linux Plug and Play Support v0.96 (c) Adam Belay >PnPBIOS: Scanning system for PnP BIOS support... >PnPBIOS: Found PnP BIOS installation structure at 0xc00f2e20 >PnPBIOS: PnP BIOS version 1.0, entry 0xf0000:0x2e4e, dseg 0xf0000 >PnPBIOS: 16 nodes reported by PnP BIOS; 16 recorded by driver >block request queues: > 128 requests per read queue > 128 requests per write queue > 8 requests per batch > enter congestion at 15 > exit congestion at 17 >Linux Kernel Card Services 3.1.22 > options: [pci] [cardbus] [pm] >PCI: Probing PCI hardware >PCI: Using IRQ router PIIX [8086/248c] at 00:1f.0 >cpufreq: Intel(R) SpeedStep(TM) for this processor not (yet) available. >cpufreq: P4/Xeon(TM) CPU On-Demand Clock Modulation available >Enabling SEP on CPU 0 >Journalled Block Device driver loaded >Installing knfsd (copyright (C) 1996 okir-pn4DOG8n3UYbFoVRYvo4fw@public.gmane.org). >udf: registering filesystem >ACPI: AC Adapter [ACAD] (off-line) >ACPI: Battery Slot [BAT1] (battery absent) >ACPI: Power Button (FF) [PWRF] >ACPI: Sleep Button (CM) [SLPB] >ACPI: Lid Switch [LID] >ACPI: Fan [C1D7] (off) >ACPI: Fan [C1D8] (off) >ACPI: Fan [C1D9] (off) >ACPI: Fan [C1DA] (off) >ACPI: Processor [C000] (supports C1 C2 C3, 8 throttling states) >[ACPI Debug] Integer: 0000000000000E62 >[ACPI Debug] Integer: 0000000000000DFE >[ACPI Debug] Integer: 0000000000000D9A >[ACPI Debug] Integer: 0000000000000D36 >[ACPI Debug] Integer: 0000000000000CD2 >ACPI: Thermal Zone [TZ1] (32 C) >[ACPI Debug] Integer: 0000000000000DFE >[ACPI Debug] Integer: 0000000000000D68 >[ACPI Debug] Integer: 0000000000000D04 >[ACPI Debug] Integer: 0000000000000CA0 >ACPI: Thermal Zone [TZ2] (28 C) >[ACPI Debug] Integer: 0000000000000CD2 >ACPI: Thermal Zone [TZ3] (27 C) > >----- ------ > > >------------------------------------------------------- >This sf.net email is sponsored by:ThinkGeek >Welcome to geek heaven. >http://thinkgeek.com/sf >_______________________________________________ >Acpi-devel mailing list >Acpi-devel-5NWGOfrQmneRv+LV9MX5uipxlwaOVQ5f@public.gmane.org >https://lists.sourceforge.net/lists/listinfo/acpi-devel > > ------------------------------------------------------- This sf.net email is sponsored by:ThinkGeek Welcome to geek heaven. http://thinkgeek.com/sf