RE: region size computed incorrectly

RE: region size computed incorrectly

[Grover, Andrew]

I was able to reproduce this. Putting LPCR in the HPET scope instead of
the parent scope (by removing the ^s) seems to be a temporary
workaround. We appear to be creating 2 LPCR objects, 1 of which is
initialized correctly and 1 which is zeroed out. We look at the
not-initialized one, and throw errors.

BTW PNP0103 is the HPET, High Precision Event Timer. I don't know how
people are supposed to request PNP IDs these days, but the HPET spec
says 0103, so I guess they got it. :)

Regards -- Andy

> -----Original Message-----
> From: Albert Cahalan [mailto:albert-Rn4VEauK+AKRv+LV9MX5uipxlwaOVQ5f@public.gmane.org] 
> Sent: Saturday, August 16, 2003 8:57 AM
> To: acpi-devel-5NWGOfrQmneRv+LV9MX5uipxlwaOVQ5f@public.gmane.org
> Subject: [ACPI] region size computed incorrectly
> 
> 
> Consider the following chunk of code, produced by
> the Intel disassembler:
> 
>                 Device (HPET)
>                 {
>                     Name (_HID, EisaId ("PNP0103"))
>                     Name (_CRS, ResourceTemplate ()
>                     {
>                         IRQNoFlags () {0}
>                         IRQNoFlags () {8}
>                         Memory32Fixed (ReadOnly, 0xFEC01000, 
> 0x00000400)
>                     })
>                     OperationRegion (^LPCR, PCI_Config, 0xA0, 0x04)
>                     Field (^LPCR, AnyAcc, NoLock, Preserve)
>                     {
>                         HPTE,   32
>                     }
> 
>                     Method (_STA, 0, NotSerialized)
>                     {
>                         And (HPTE, 0x01, Local0)
>                         If (Local0)
>                         {
>                             Return (0x0F)
>                         }
> 
>                         Return (0x00)
>                     }
>                 }
> 
> 
> There we have a 4-byte OperationRegion with a 32-bit
> field called HPTE. That fits. Then, in _STA, HPTE is
> read, and linux-2.6.0-test3 spits out errors:
> 
> 
> ACPI: Subsystem revision 20030714
>  tbxface-0117 [03] acpi_load_tables      : ACPI Tables 
> successfully acquired
> Parsing all Control 
> Methods:......................................................
> ..............................................................
> .....................
> Table [DSDT](id F004) - 446 Objects with 42 Devices 137 
> Methods 13 Regions
> ACPI Namespace successfully loaded at root ffffffff80590780
> evxfevnt-0093 [04] acpi_enable           : Transition to ACPI 
> mode successful
> evgpeblk-0748 [06] ev_create_gpe_block   : GPE 00 to 15 
> [_GPE] 2 regs at 0000000000005020 on int 9
> evgpeblk-0748 [06] ev_create_gpe_block   : GPE 16 to 47 
> [_GPE] 4 regs at 00000000000050B0 on int 9
> Completing Region/Field/Buffer/Package 
> initialization:...............................................
> .............................................
> Initialized 12/14 Regions 26/26 Fields 38/38 Buffers 16/16 
> Packages (455 nodes)
> Executing all Device _STA and_INI 
> methods:...................... exfldio-0129 [23] 
> ex_setup_region       : Field [HPTE] access width (1 bytes) 
> too large for region [LPCR] (length 0)
>  exfldio-0140 [23] ex_setup_region       : Field [HPTE] 
> Base+Offset+Width 0+0+1 is beyond end of region [LPCR] (length 0)
>  dswexec-0422 [15] ds_exec_end_op        : [And]: Could not 
> resolve operands, AE_AML_REGION_LIMIT
>  psparse-1121: *** Error: Method execution failed 
> [\_SB_.PCI0.SBRG.HPET._STA] (Node 00000100081d36f0), 
> AE_AML_REGION_LIMIT
>   uteval-0098: *** Error: Method execution failed 
> [\_SB_.PCI0.SBRG.HPET._STA] (Node 00000100081d36f0), 
> AE_AML_REGION_LIMIT
> .....................
> 43 Devices found containing: 42 _STA, 0 _INI methods
> ACPI: Interpreter enabled
> ACPI: Using IOAPIC for interrupt routing
> ACPI: PCI Root Bridge [PCI0] (00:00)
> PCI: Probing PCI hardware (bus 00)
> ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
> ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI1._PRT]
>  exfldio-0129 [21] ex_setup_region       : Field [HPTE] 
> access width (1 bytes) too large for region [LPCR] (length 0)
>  exfldio-0140 [21] ex_setup_region       : Field [HPTE] 
> Base+Offset+Width 0+0+1 is beyond end of region [LPCR] (length 0)
>  dswexec-0422 [13] ds_exec_end_op        : [And]: Could not 
> resolve operands, AE_AML_REGION_LIMIT
>  psparse-1121: *** Error: Method execution failed 
> [\_SB_.PCI0.SBRG.HPET._STA] (Node 00000100081d36f0), 
> AE_AML_REGION_LIMIT
> 
> 
> Somehow, the LPCR region is being seen as length 0.
> This is not correct; it is 4 bytes wide. Until the
> boundry checking is fixed, it should be disabled.
> Even then, a minor overflow should just printk() a
> warning and keep on going.
> 
> BTW, what is a PNP0103 device?
> 
> 
> 
> 
> -------------------------------------------------------
> This SF.Net email sponsored by: Free pre-built ASP.NET sites including
> Data Reports, E-commerce, Portals, and Forums are available now.
> Download today and enter to win an XBOX or Visual Studio .NET.
> http://aspnet.click-url.com/go/psa00100003ave/direct;at.aspnet
> _072303_01/01
> _______________________________________________
> Acpi-devel mailing list
> Acpi-devel-5NWGOfrQmneRv+LV9MX5uipxlwaOVQ5f@public.gmane.org
> https://lists.sourceforge.net/lists/listinfo/acpi-devel
> 


-------------------------------------------------------
This SF.Net email sponsored by: Free pre-built ASP.NET sites including
Data Reports, E-commerce, Portals, and Forums are available now.
Download today and enter to win an XBOX or Visual Studio .NET.
http://aspnet.click-url.com/go/psa00100003ave/direct;at.aspnet_072303_01/01

Re: 2.4.x ACPI updates

[Eric Valette]

[-- Attachment #1: Type: text/plain, Size: 1677 bytes --]

> From: Jeff Garzik (jgarzik-e+AXbWqSrlAAvxtiuMwx3w@public.gmane.org)
> Date: Mon Aug 18 2003 - 14:11:16 EST
> 
>     * Next message: Linus Torvalds: "Re: Fix up riscom8 driver to use work queues instead of task queueing."
>     * Previous message: Andries . Brouwer: "headers"
>     * Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] 
> 
> For those without BK, I have extracted Intel's latest 2.4.x ACPI updates
> into patch form:
> 
> ftp://ftp.kernel.org/pub/linux/kernel/people/jgarzik/patchkits/2.4/2.4.22-rc2-acpi1.patch.bz2

I was patiently waiting for sourceforge ACPI page to be updated but as 
it does not happen (Andrew?) I tried your patch and found one problem 
with it and one with the patch itself :

1) The patch does not apply correctly for driver/acpi/Config.in. As It 
is a single block to replace, I copied the new block by hand but then 
xconfig started to fail. I just reverted to original version.

2) I own a A7V that has been blacklisted by last patch while I have been 
using ACPI (mainly for software power off via power button on this 
machine :-)). Using ht only, I lost silently this feature and halted my 
machine without any form of sync which is rather bad... Seeing the 
message concerning blacklisted machine, I tried with acpi=force at boot 
time and of course booted sucessfully. Here is the dmesg attached. May I 
have a few words about the reason why this machine has been blacklisted?

-- 
    __
   /  `                   	Eric Valette
  /--   __  o _.          	6 rue Paul Le Flem
(___, / (_(_(__         	35740 Pace

Tel: +33 (0)2 99 85 26 76	Fax: +33 (0)2 99 85 26 76
E-mail: eric.valette-GANU6spQydw@public.gmane.org

[-- Attachment #2: a7v-with-acpi=force --]
[-- Type: text/plain, Size: 12080 bytes --]

Linux version 2.4.22-rc2 (root@tri-yann) (gcc version 3.3.2 20030812 (Debian prerelease)) #36 Mon Aug 18 22:28:45 CEST 2003
BIOS-provided physical RAM map:
 BIOS-e820: 0000000000000000 - 000000000009ec00 (usable)
 BIOS-e820: 000000000009ec00 - 00000000000a0000 (reserved)
 BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
 BIOS-e820: 0000000000100000 - 000000001ffec000 (usable)
 BIOS-e820: 000000001ffec000 - 000000001ffef000 (ACPI data)
 BIOS-e820: 000000001ffef000 - 000000001ffff000 (reserved)
 BIOS-e820: 000000001ffff000 - 0000000020000000 (ACPI NVS)
 BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved)
511MB LOWMEM available.
ACPI: have wakeup address 0xc0001000
On node 0 totalpages: 131052
zone(0): 4096 pages.
zone(1): 126956 pages.
zone(2): 0 pages.
DMI 2.3 present.
Warning: acpi=force overrules DMI blacklist: acpi=ht
ACPI: RSDP (v000 ASUS                                      ) @ 0x000f6a90
ACPI: RSDT (v001 ASUS   A7V      0x30303031 MSFT 0x31313031) @ 0x1ffec000
ACPI: FADT (v001 ASUS   A7V      0x30303031 MSFT 0x31313031) @ 0x1ffec080
ACPI: BOOT (v001 ASUS   A7V      0x30303031 MSFT 0x31313031) @ 0x1ffec040
ACPI: DSDT (v001   ASUS A7V      0x00001000 MSFT 0x0100000b) @ 0x00000000
ACPI: MADT not present
Kernel command line: BOOT_IMAGE=Linux root=2101 acpi=force
Local APIC disabled by BIOS -- reenabling.
Found and enabled local APIC!
Initializing CPU#0
Detected 1009.021 MHz processor.
Console: colour VGA+ 80x25
Calibrating delay loop... 2011.95 BogoMIPS
Memory: 514536k/524208k available (2432k kernel code, 9280k reserved, 807k data, 120k init, 0k highmem)
Dentry cache hash table entries: 65536 (order: 7, 524288 bytes)
Inode cache hash table entries: 32768 (order: 6, 262144 bytes)
Mount cache hash table entries: 512 (order: 0, 4096 bytes)
Buffer cache hash table entries: 32768 (order: 5, 131072 bytes)
Page-cache hash table entries: 131072 (order: 7, 524288 bytes)
CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
CPU: L2 Cache: 256K (64 bytes/line)
CPU:     After generic, caps: 0183fbff c1c7fbff 00000000 00000000
CPU:             Common caps: 0183fbff c1c7fbff 00000000 00000000
CPU: AMD Athlon(tm) Processor stepping 02
Enabling fast FPU save and restore... done.
Checking 'hlt' instruction... OK.
POSIX conformance testing by UNIFIX
enabled ExtINT on CPU#0
ESR value before enabling vector: 00000000
ESR value after enabling vector: 00000000
Using local APIC timer interrupts.
calibrating APIC timer ...
..... CPU clock speed is 1009.0145 MHz.
..... host bus clock speed is 201.8028 MHz.
cpu: 0, clocks: 2018028, slice: 1009014
CPU0<T0:2018016,T1:1008992,D:10,S:1009014,C:2018028>
mtrr: v1.40 (20010327) Richard Gooch (rgooch-r1x6VkxMR+00zabcByZE4g@public.gmane.org)
mtrr: detected mtrr type: Intel
ACPI: Subsystem revision 20030813
PCI: PCI BIOS revision 2.10 entry at 0xf1180, last bus=1
PCI: Using configuration type 1
ACPI: Interpreter enabled
ACPI: Using PIC for interrupt routing
ACPI: System [ACPI] (supports S0 S1 S4 S5)
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 10 11 12 14 15, disabled)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 *9 10 11 12 14 15)
ACPI: PCI Root Bridge [PCI0] (00:00)
PCI: Probing PCI hardware (bus 00)
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
PCI: Probing PCI hardware
ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 5
ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 11
ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 10
ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 9
PCI: Using ACPI for IRQ routing
PCI: if you experience problems, try using option 'pci=noacpi' or even 'acpi=off'
PCI: Disabling Via external APIC routing
PCI: Via IRQ fixup for 00:04.2, from 9 to 5
PCI: Via IRQ fixup for 00:04.3, from 9 to 5
Linux NET4.0 for Linux 2.4
Based upon Swansea University Computer Society NET3.039
Initializing RT netlink socket
Starting kswapd
Journalled Block Device driver loaded
devfs: v1.12c (20020818) Richard Gooch (rgooch-r1x6VkxMR+00zabcByZE4g@public.gmane.org)
devfs: boot_options: 0x1
Installing knfsd (copyright (C) 1996 okir-pn4DOG8n3UYbFoVRYvo4fw@public.gmane.org).
NTFS driver 2.1.4a [Flags: R/O].
udf: registering filesystem
ACPI: Power Button (FF) [PWRF]
ACPI: Processor [CPU0] (supports C1 C2, 16 throttling states)
parport0: PC-style at 0x378 (0x778) [PCSPP,TRISTATE]
parport_pc: Via 686A parallel port: io=0x378
i2c-core.o: i2c core module
i2c-dev.o: i2c /dev entries driver module
i2c-core.o: driver i2c-dev dummy driver registered.
i2c-algo-bit.o: i2c bit algorithm module
i2c-algo-pcf.o: i2c pcf8584 algorithm module
i2c-proc.o version 2.6.1 (20010825)
pty: 256 Unix98 ptys configured
Serial driver version 5.05c (2001-07-08) with MANY_PORTS SHARE_IRQ SERIAL_PCI enabled
ttyS00 at 0x03f8 (irq = 4) is a 16550A
ttyS01 at 0x02f8 (irq = 3) is a 16550A
lp0: using parport0 (polling).
Real Time Clock Driver v1.10e
Floppy drive(s): fd0 is 1.44M
FDC 0 is a post-1991 82077
RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize
loop: loaded (max 8 devices)
PPP generic driver version 2.4.2
PPP Deflate Compression module registered
PPP BSD Compression module registered
Linux agpgart interface v0.99 (c) Jeff Hartmann
agpgart: Maximum main memory to use for agp memory: 439M
agpgart: Detected Via Apollo Pro KT133 chipset
agpgart: AGP aperture is 32M @ 0xe6000000
[drm] Initialized tdfx 1.0.0 20010216 on minor 0
Uniform Multi-Platform E-IDE driver Revision: 7.00beta4-2.4
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
VP_IDE: IDE controller at PCI slot 00:04.1
VP_IDE: chipset revision 16
VP_IDE: not 100% native mode: will probe irqs later
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
VP_IDE: VIA vt82c686a (rev 22) IDE UDMA66 controller on pci00:04.1
    ide0: BM-DMA at 0xd800-0xd807, BIOS settings: hda:DMA, hdb:pio
    ide1: BM-DMA at 0xd808-0xd80f, BIOS settings: hdc:pio, hdd:pio
PDC20265: IDE controller at PCI slot 00:11.0
PDC20265: chipset revision 2
PDC20265: not 100% native mode: will probe irqs later
PDC20265: (U)DMA Burst Bit ENABLED Primary PCI Mode Secondary PCI Mode.
    ide2: BM-DMA at 0x7800-0x7807, BIOS settings: hde:DMA, hdf:pio
    ide3: BM-DMA at 0x7808-0x780f, BIOS settings: hdg:pio, hdh:DMA
hda: Maxtor 91360U4, ATA DISK drive
blk: queue c0479880, I/O limit 4095Mb (mask 0xffffffff)
hde: ST380011A, ATA DISK drive
blk: queue c047a128, I/O limit 4095Mb (mask 0xffffffff)
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
ide2 at 0x9000-0x9007,0x8802 on irq 10
hda: attached ide-disk driver.
hda: host protected area => 1
hda: 26588016 sectors (13613 MB) w/2048KiB Cache, CHS=1655/255/63, UDMA(33)
hde: attached ide-disk driver.
hde: host protected area => 1
hde: 156301488 sectors (80026 MB) w/2048KiB Cache, CHS=9729/255/63, UDMA(100)
Partition check:
 /dev/ide/host0/bus0/target0/lun0: p1 p2 < p5 p6 p7 >
 /dev/ide/host2/bus0/target0/lun0: p1 p2 p3 p4 < p5 p6 p7 p8 p9 >
SCSI subsystem driver Revision: 1.00
scsi0 : Adaptec AIC7XXX EISA/VLB/PCI SCSI HBA DRIVER, Rev 6.2.36
        <Adaptec 2940 Ultra SCSI adapter>
        aic7880: Ultra Wide Channel A, SCSI Id=7, 16/253 SCBs

scsi1 : Adaptec AIC7XXX EISA/VLB/PCI SCSI HBA DRIVER, Rev 6.2.36
        <Adaptec 29160 Ultra160 SCSI adapter>
        aic7892: Ultra160 Wide Channel A, SCSI Id=7, 32/253 SCBs

(scsi1:A:6): 160.000MB/s transfers (80.000MHz DT, offset 127, 16bit)
(scsi0:A:3): 5.000MB/s transfers (5.000MHz, offset 15)
  Vendor: HP        Model: C1533A            Rev: A907
  Type:   Sequential-Access                  ANSI SCSI revision: 02
(scsi0:A:5): 10.000MB/s transfers (10.000MHz, offset 7)
  Vendor: YAMAHA    Model: CRW2100S          Rev: 1.0N
  Type:   CD-ROM                             ANSI SCSI revision: 02
  Vendor: QUANTUM   Model: ATLAS10K3_36_WLS  Rev: 020W
  Type:   Direct-Access                      ANSI SCSI revision: 03
scsi1:A:6:0: Tagged Queuing enabled.  Depth 253
st: Version 20030406, bufsize 32768, max init. bufs 4, s/g segs 16
Attached scsi tape st0 at scsi0, channel 0, id 3, lun 0
Attached scsi disk sda at scsi1, channel 0, id 6, lun 0
SCSI device sda: 71833096 512-byte hdwr sectors (36779 MB)
 /dev/scsi/host1/bus0/target6/lun0: p1 p2 < p5 p6 p7 p8 > p3
Attached scsi CD-ROM sr0 at scsi0, channel 0, id 5, lun 0
sr0: scsi3-mmc drive: 40x/40x writer cd/rw xa/form2 cdda tray
Uniform CD-ROM driver Revision: 3.12
ohci1394: $Rev: 1010 $ Ben Collins <bcollins-8fiUuRrzOP0dnm+yROfE0A@public.gmane.org>
PCI: Enabling device 00:0c.0 (0014 -> 0016)
ohci1394_0: OHCI-1394 1.0 (PCI): IRQ=[9]  MMIO=[d4800000-d48007ff]  Max Packet=[2048]
video1394: Installed video1394 module
raw1394: /dev/raw1394 device initialized
sbp2: $Rev: 1010 $ Ben Collins <bcollins-8fiUuRrzOP0dnm+yROfE0A@public.gmane.org>
Creative EMU10K1 PCI Audio Driver, version 0.20, 22:29:14 Aug 18 2003
PCI: Enabling device 00:0a.0 (0004 -> 0005)
emu10k1: EMU10K1 rev 7 model 0x8026 found, IO at 0xa400-0xa41f, IRQ 11
ac97_codec: AC97  codec, id: TRA35 (TriTech TR A5)
usb.c: registered new driver usbdevfs
usb.c: registered new driver hub
host/uhci.c: USB Universal Host Controller Interface driver v1.1
host/uhci.c: USB UHCI at I/O 0xd400, IRQ 5
usb.c: new USB bus registered, assigned bus number 1
hub.c: USB hub found
hub.c: 2 ports detected
host/uhci.c: USB UHCI at I/O 0xd000, IRQ 5
usb.c: new USB bus registered, assigned bus number 2
hub.c: USB hub found
hub.c: 2 ports detected
usb.c: registered new driver audio
audio.c: v1.0.0:USB Audio Class driver
rtl8150.c: rtl8150 based usb-ethernet driver v0.4.3 (2002/12/31)
usb.c: registered new driver rtl8150
Initializing USB Mass Storage driver...
usb.c: registered new driver usb-storage
USB Mass Storage support registered.
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP
IP: routing cache hash table of 4096 buckets, 32Kbytes
TCP: Hash tables configured (established 32768 bind 65536)
ip_conntrack version 2.1 (4095 buckets, 32760 max) - 292 bytes per conntrack
ip_tables: (C) 2000-2002 Netfilter core team
arp_tables: (C) 2002 David S. Miller
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
lec.c: Aug 18 2003 22:24:21 initialized
VFS: Mounted root (ext2 filesystem) readonly.
ieee1394: Host added: ID:BUS[0-00:1023]  GUID[003095231000ad1f]
Mounted devfs on /dev
Freeing unused kernel memory: 120k freed
hub.c: new USB device 00:04.2-2, assigned address 2
hub.c: USB hub found
hub.c: 4 ports detected
hub.c: new USB device 00:04.2-2.4, assigned address 3
rtl8150.c: eth0: rtl8150 is detected
Adding Swap: 1228936k swap-space (priority -1)
hub.c: new USB device 00:04.3-2, assigned address 2
hub.c: USB hub found
hub.c: 4 ports detected
unicorn_atm: v 0.0.0, 13:49:07 Aug  9 2003
unicorn_pci: v 0.0.0, 13:49:10 Aug  9 2003
unicorn_pci: MSW parameters: 
ActivationMode=1
ActTimeout=300000
AutoActivation=1
DebugLevel=0
DownstreamRate=8192
unicorn_pci: ExchangeDelay=20
FmPollingRate=1000
g_RefGain=38
g_Teqmode=7
InitTimeout=20000
Interoperability=0
unicorn_pci: LCD_Trig=15000
LOS_LOF_Trig=5000
LoopbackMode=0
MswDebugLevel=2
RetryTime=5000
TrainingDelay=120
unicorn_pci: useRFC019v=0
useRFC029v=8000
useRFC040v=0
useRFC041v=1
setINITIALDAC=64
unicorn_pci: useRFCFixedRate=1
useVCXO=0
_no_TS652=0
unicorn_pci: driver parameters: DebugLevel=0
PCI: Enabling device 00:09.0 (0014 -> 0016)
unicorn_msw: FmPollingRate=1000ms,InitTimeout=20000ms,ActTimeout=300000
unicorn_msw: AMU: ECI PATCH DISABLED
unicorn_pci: AdslStatus=1
unicorn_msw: Current Modem State (3): ACTIVATING
unicorn_pci: MSW state: ACTIVATING
spurious 8259A interrupt: IRQ7.
unicorn_msw: Event Reported (3): Initializing
unicorn_pci: MSW event: TO INITIALIZING
unicorn_msw: Current Modem State (6): INITIALIZING
unicorn_pci: MSW state: INITIALIZING
unicorn_pci: upRate=377cells/s,downRate=1509cells/s
unicorn_pci: AdslStatus=1
unicorn_msw: Event Reported (4): Showtime
unicorn_pci: MSW event: AMSW SHOWTIME
unicorn_msw: Current Modem State (9): SHOWTIME_L0
unicorn_pci: MSW state: SHOWTIME L0
unicorn_atm: ESI=00:81:77:12:ec:73

Re: 2.4.x ACPI updates

[Jeff Garzik]

Eric Valette wrote:
> I was patiently waiting for sourceforge ACPI page to be updated but as 
> it does not happen (Andrew?) I tried your patch and found one problem 
> with it and one with the patch itself :

Well, Intel's patch, not mine :)


> 1) The patch does not apply correctly for driver/acpi/Config.in. As It 
> is a single block to replace, I copied the new block by hand but then 
> xconfig started to fail. I just reverted to original version.

It definitely applies to 2.4.22-rc2 here...  weird.


> 2) I own a A7V that has been blacklisted by last patch while I have been 
> using ACPI (mainly for software power off via power button on this 
> machine :-)). Using ht only, I lost silently this feature and halted my 
> machine without any form of sync which is rather bad... Seeing the 
> message concerning blacklisted machine, I tried with acpi=force at boot 
> time and of course booted sucessfully. Here is the dmesg attached. May I 
> have a few words about the reason why this machine has been blacklisted?

I'll let the ACPI guys take this one...

	Jeff








-------------------------------------------------------
This SF.Net email sponsored by: Free pre-built ASP.NET sites including
Data Reports, E-commerce, Portals, and Forums are available now.
Download today and enter to win an XBOX or Visual Studio .NET.
http://aspnet.click-url.com/go/psa00100003ave/direct;at.aspnet_072303_01/01

Re: 2.4.x ACPI updates

[Eric Valette]

Jeff Garzik wrote:
> Eric Valette wrote:
> 
>> I was patiently waiting for sourceforge ACPI page to be updated but as 
>> it does not happen (Andrew?) I tried your patch and found one problem 
>> with it and one with the patch itself :
> 
> 
> Well, Intel's patch, not mine :)

Sure. Thanks for providing the patch... I hope sourceforge will be 
updated : I do not want to use BK juste for testing ACPI on my two 
personnal machines...

> It definitely applies to 2.4.22-rc2 here...  weird.

valette@tri-yann->uname -a
Linux tri-yann 2.4.22-rc2 #36 Mon Aug 18 22:28:45 CEST 2003 i686 GNU/Linux

Does not work for me but this is not important : I just wanted to let 
you know. Note that as I have reached this state by applying all 
incremental patches and not directly 2.4.22-rc2 on top of a 2.4.21.

>> 2) I own a A7V that has been blacklisted
 >> (stuff deleted)
> 
> I'll let the ACPI guys take this one...

The real reason of the mail :-)

-- 
    __
   /  `                   	Eric Valette
  /--   __  o _.          	6 rue Paul Le Flem
(___, / (_(_(__         	35740 Pace

Tel: +33 (0)2 99 85 26 76	Fax: +33 (0)2 99 85 26 76
E-mail: eric.valette-GANU6spQydw@public.gmane.org



-------------------------------------------------------
This SF.Net email sponsored by: Free pre-built ASP.NET sites including
Data Reports, E-commerce, Portals, and Forums are available now.
Download today and enter to win an XBOX or Visual Studio .NET.
http://aspnet.click-url.com/go/psa00100003ave/direct;at.aspnet_072303_01/01

Please Remove ASUS A7V from blacklist in dmi-scan.c

[Eric Valette]

[-- Attachment #1: Type: text/plain, Size: 889 bytes --]

  I own a A7V that has been blacklisted by last patch while I have been
using ACPI (mainly for software power off via power button on this
machine :-)). Using ht only, I lost silently this feature and halted my
machine without any form of sync which is rather bad... Seeing the
message concerning blacklisted machine, I tried with acpi=force at boot
time and of course booted sucessfully. Here is the dmesg attached. May I
have a few words about the reason why this machine has been blacklisted?

NB : when you have young childs or a wife that does not want to hear 
about linux, power off button software controlled is indeed a great 
faeture :-)

-- 
     __
    /  `                   	Eric Valette
   /--   __  o _.          	6 rue Paul Le Flem
(___, / (_(_(__         	35740 Pace

Tel: +33 (0)2 99 85 26 76	Fax: +33 (0)2 99 85 26 76
E-mail: eric.valette-GANU6spQydw@public.gmane.org


[-- Attachment #2: a7v-with-acpi=force --]
[-- Type: text/plain, Size: 12081 bytes --]

Linux version 2.4.22-rc2 (root@tri-yann) (gcc version 3.3.2 20030812 (Debian prerelease)) #36 Mon Aug 18 22:28:45 CEST 2003
BIOS-provided physical RAM map:
 BIOS-e820: 0000000000000000 - 000000000009ec00 (usable)
 BIOS-e820: 000000000009ec00 - 00000000000a0000 (reserved)
 BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
 BIOS-e820: 0000000000100000 - 000000001ffec000 (usable)
 BIOS-e820: 000000001ffec000 - 000000001ffef000 (ACPI data)
 BIOS-e820: 000000001ffef000 - 000000001ffff000 (reserved)
 BIOS-e820: 000000001ffff000 - 0000000020000000 (ACPI NVS)
 BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved)
511MB LOWMEM available.
ACPI: have wakeup address 0xc0001000
On node 0 totalpages: 131052
zone(0): 4096 pages.
zone(1): 126956 pages.
zone(2): 0 pages.
DMI 2.3 present.
Warning: acpi=force overrules DMI blacklist: acpi=ht
ACPI: RSDP (v000 ASUS                                      ) @ 0x000f6a90
ACPI: RSDT (v001 ASUS   A7V      0x30303031 MSFT 0x31313031) @ 0x1ffec000
ACPI: FADT (v001 ASUS   A7V      0x30303031 MSFT 0x31313031) @ 0x1ffec080
ACPI: BOOT (v001 ASUS   A7V      0x30303031 MSFT 0x31313031) @ 0x1ffec040
ACPI: DSDT (v001   ASUS A7V      0x00001000 MSFT 0x0100000b) @ 0x00000000
ACPI: MADT not present
Kernel command line: BOOT_IMAGE=Linux root=2101 acpi=force
Local APIC disabled by BIOS -- reenabling.
Found and enabled local APIC!
Initializing CPU#0
Detected 1009.021 MHz processor.
Console: colour VGA+ 80x25
Calibrating delay loop... 2011.95 BogoMIPS
Memory: 514536k/524208k available (2432k kernel code, 9280k reserved, 807k data, 120k init, 0k highmem)
Dentry cache hash table entries: 65536 (order: 7, 524288 bytes)
Inode cache hash table entries: 32768 (order: 6, 262144 bytes)
Mount cache hash table entries: 512 (order: 0, 4096 bytes)
Buffer cache hash table entries: 32768 (order: 5, 131072 bytes)
Page-cache hash table entries: 131072 (order: 7, 524288 bytes)
CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
CPU: L2 Cache: 256K (64 bytes/line)
CPU:     After generic, caps: 0183fbff c1c7fbff 00000000 00000000
CPU:             Common caps: 0183fbff c1c7fbff 00000000 00000000
CPU: AMD Athlon(tm) Processor stepping 02
Enabling fast FPU save and restore... done.
Checking 'hlt' instruction... OK.
POSIX conformance testing by UNIFIX
enabled ExtINT on CPU#0
ESR value before enabling vector: 00000000
ESR value after enabling vector: 00000000
Using local APIC timer interrupts.
calibrating APIC timer ...
..... CPU clock speed is 1009.0145 MHz.
..... host bus clock speed is 201.8028 MHz.
cpu: 0, clocks: 2018028, slice: 1009014
CPU0<T0:2018016,T1:1008992,D:10,S:1009014,C:2018028>
mtrr: v1.40 (20010327) Richard Gooch (rgooch-r1x6VkxMR+00zabcByZE4g@public.gmane.org)
mtrr: detected mtrr type: Intel
ACPI: Subsystem revision 20030813
PCI: PCI BIOS revision 2.10 entry at 0xf1180, last bus=1
PCI: Using configuration type 1
ACPI: Interpreter enabled
ACPI: Using PIC for interrupt routing
ACPI: System [ACPI] (supports S0 S1 S4 S5)
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 10 11 12 14 15, disabled)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 *9 10 11 12 14 15)
ACPI: PCI Root Bridge [PCI0] (00:00)
PCI: Probing PCI hardware (bus 00)
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
PCI: Probing PCI hardware
ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 5
ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 11
ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 10
ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 9
PCI: Using ACPI for IRQ routing
PCI: if you experience problems, try using option 'pci=noacpi' or even 'acpi=off'
PCI: Disabling Via external APIC routing
PCI: Via IRQ fixup for 00:04.2, from 9 to 5
PCI: Via IRQ fixup for 00:04.3, from 9 to 5
Linux NET4.0 for Linux 2.4
Based upon Swansea University Computer Society NET3.039
Initializing RT netlink socket
Starting kswapd
Journalled Block Device driver loaded
devfs: v1.12c (20020818) Richard Gooch (rgooch-r1x6VkxMR+00zabcByZE4g@public.gmane.org)
devfs: boot_options: 0x1
Installing knfsd (copyright (C) 1996 okir-pn4DOG8n3UYbFoVRYvo4fw@public.gmane.org).
NTFS driver 2.1.4a [Flags: R/O].
udf: registering filesystem
ACPI: Power Button (FF) [PWRF]
ACPI: Processor [CPU0] (supports C1 C2, 16 throttling states)
parport0: PC-style at 0x378 (0x778) [PCSPP,TRISTATE]
parport_pc: Via 686A parallel port: io=0x378
i2c-core.o: i2c core module
i2c-dev.o: i2c /dev entries driver module
i2c-core.o: driver i2c-dev dummy driver registered.
i2c-algo-bit.o: i2c bit algorithm module
i2c-algo-pcf.o: i2c pcf8584 algorithm module
i2c-proc.o version 2.6.1 (20010825)
pty: 256 Unix98 ptys configured
Serial driver version 5.05c (2001-07-08) with MANY_PORTS SHARE_IRQ SERIAL_PCI enabled
ttyS00 at 0x03f8 (irq = 4) is a 16550A
ttyS01 at 0x02f8 (irq = 3) is a 16550A
lp0: using parport0 (polling).
Real Time Clock Driver v1.10e
Floppy drive(s): fd0 is 1.44M
FDC 0 is a post-1991 82077
RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize
loop: loaded (max 8 devices)
PPP generic driver version 2.4.2
PPP Deflate Compression module registered
PPP BSD Compression module registered
Linux agpgart interface v0.99 (c) Jeff Hartmann
agpgart: Maximum main memory to use for agp memory: 439M
agpgart: Detected Via Apollo Pro KT133 chipset
agpgart: AGP aperture is 32M @ 0xe6000000
[drm] Initialized tdfx 1.0.0 20010216 on minor 0
Uniform Multi-Platform E-IDE driver Revision: 7.00beta4-2.4
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
VP_IDE: IDE controller at PCI slot 00:04.1
VP_IDE: chipset revision 16
VP_IDE: not 100% native mode: will probe irqs later
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
VP_IDE: VIA vt82c686a (rev 22) IDE UDMA66 controller on pci00:04.1
    ide0: BM-DMA at 0xd800-0xd807, BIOS settings: hda:DMA, hdb:pio
    ide1: BM-DMA at 0xd808-0xd80f, BIOS settings: hdc:pio, hdd:pio
PDC20265: IDE controller at PCI slot 00:11.0
PDC20265: chipset revision 2
PDC20265: not 100% native mode: will probe irqs later
PDC20265: (U)DMA Burst Bit ENABLED Primary PCI Mode Secondary PCI Mode.
    ide2: BM-DMA at 0x7800-0x7807, BIOS settings: hde:DMA, hdf:pio
    ide3: BM-DMA at 0x7808-0x780f, BIOS settings: hdg:pio, hdh:DMA
hda: Maxtor 91360U4, ATA DISK drive
blk: queue c0479880, I/O limit 4095Mb (mask 0xffffffff)
hde: ST380011A, ATA DISK drive
blk: queue c047a128, I/O limit 4095Mb (mask 0xffffffff)
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
ide2 at 0x9000-0x9007,0x8802 on irq 10
hda: attached ide-disk driver.
hda: host protected area => 1
hda: 26588016 sectors (13613 MB) w/2048KiB Cache, CHS=1655/255/63, UDMA(33)
hde: attached ide-disk driver.
hde: host protected area => 1
hde: 156301488 sectors (80026 MB) w/2048KiB Cache, CHS=9729/255/63, UDMA(100)
Partition check:
 /dev/ide/host0/bus0/target0/lun0: p1 p2 < p5 p6 p7 >
 /dev/ide/host2/bus0/target0/lun0: p1 p2 p3 p4 < p5 p6 p7 p8 p9 >
SCSI subsystem driver Revision: 1.00
scsi0 : Adaptec AIC7XXX EISA/VLB/PCI SCSI HBA DRIVER, Rev 6.2.36
        <Adaptec 2940 Ultra SCSI adapter>
        aic7880: Ultra Wide Channel A, SCSI Id=7, 16/253 SCBs

scsi1 : Adaptec AIC7XXX EISA/VLB/PCI SCSI HBA DRIVER, Rev 6.2.36
        <Adaptec 29160 Ultra160 SCSI adapter>
        aic7892: Ultra160 Wide Channel A, SCSI Id=7, 32/253 SCBs

(scsi1:A:6): 160.000MB/s transfers (80.000MHz DT, offset 127, 16bit)
(scsi0:A:3): 5.000MB/s transfers (5.000MHz, offset 15)
  Vendor: HP        Model: C1533A            Rev: A907
  Type:   Sequential-Access                  ANSI SCSI revision: 02
(scsi0:A:5): 10.000MB/s transfers (10.000MHz, offset 7)
  Vendor: YAMAHA    Model: CRW2100S          Rev: 1.0N
  Type:   CD-ROM                             ANSI SCSI revision: 02
  Vendor: QUANTUM   Model: ATLAS10K3_36_WLS  Rev: 020W
  Type:   Direct-Access                      ANSI SCSI revision: 03
scsi1:A:6:0: Tagged Queuing enabled.  Depth 253
st: Version 20030406, bufsize 32768, max init. bufs 4, s/g segs 16
Attached scsi tape st0 at scsi0, channel 0, id 3, lun 0
Attached scsi disk sda at scsi1, channel 0, id 6, lun 0
SCSI device sda: 71833096 512-byte hdwr sectors (36779 MB)
 /dev/scsi/host1/bus0/target6/lun0: p1 p2 < p5 p6 p7 p8 > p3
Attached scsi CD-ROM sr0 at scsi0, channel 0, id 5, lun 0
sr0: scsi3-mmc drive: 40x/40x writer cd/rw xa/form2 cdda tray
Uniform CD-ROM driver Revision: 3.12
ohci1394: $Rev: 1010 $ Ben Collins <bcollins-8fiUuRrzOP0dnm+yROfE0A@public.gmane.org>
PCI: Enabling device 00:0c.0 (0014 -> 0016)
ohci1394_0: OHCI-1394 1.0 (PCI): IRQ=[9]  MMIO=[d4800000-d48007ff]  Max Packet=[2048]
video1394: Installed video1394 module
raw1394: /dev/raw1394 device initialized
sbp2: $Rev: 1010 $ Ben Collins <bcollins-8fiUuRrzOP0dnm+yROfE0A@public.gmane.org>
Creative EMU10K1 PCI Audio Driver, version 0.20, 22:29:14 Aug 18 2003
PCI: Enabling device 00:0a.0 (0004 -> 0005)
emu10k1: EMU10K1 rev 7 model 0x8026 found, IO at 0xa400-0xa41f, IRQ 11
ac97_codec: AC97  codec, id: TRA35 (TriTech TR A5)
usb.c: registered new driver usbdevfs
usb.c: registered new driver hub
host/uhci.c: USB Universal Host Controller Interface driver v1.1
host/uhci.c: USB UHCI at I/O 0xd400, IRQ 5
usb.c: new USB bus registered, assigned bus number 1
hub.c: USB hub found
hub.c: 2 ports detected
host/uhci.c: USB UHCI at I/O 0xd000, IRQ 5
usb.c: new USB bus registered, assigned bus number 2
hub.c: USB hub found
hub.c: 2 ports detected
usb.c: registered new driver audio
audio.c: v1.0.0:USB Audio Class driver
rtl8150.c: rtl8150 based usb-ethernet driver v0.4.3 (2002/12/31)
usb.c: registered new driver rtl8150
Initializing USB Mass Storage driver...
usb.c: registered new driver usb-storage
USB Mass Storage support registered.
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP
IP: routing cache hash table of 4096 buckets, 32Kbytes
TCP: Hash tables configured (established 32768 bind 65536)
ip_conntrack version 2.1 (4095 buckets, 32760 max) - 292 bytes per conntrack
ip_tables: (C) 2000-2002 Netfilter core team
arp_tables: (C) 2002 David S. Miller
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
lec.c: Aug 18 2003 22:24:21 initialized
VFS: Mounted root (ext2 filesystem) readonly.
ieee1394: Host added: ID:BUS[0-00:1023]  GUID[003095231000ad1f]
Mounted devfs on /dev
Freeing unused kernel memory: 120k freed
hub.c: new USB device 00:04.2-2, assigned address 2
hub.c: USB hub found
hub.c: 4 ports detected
hub.c: new USB device 00:04.2-2.4, assigned address 3
rtl8150.c: eth0: rtl8150 is detected
Adding Swap: 1228936k swap-space (priority -1)
hub.c: new USB device 00:04.3-2, assigned address 2
hub.c: USB hub found
hub.c: 4 ports detected
unicorn_atm: v 0.0.0, 13:49:07 Aug  9 2003
unicorn_pci: v 0.0.0, 13:49:10 Aug  9 2003
unicorn_pci: MSW parameters: 
ActivationMode=1
ActTimeout=300000
AutoActivation=1
DebugLevel=0
DownstreamRate=8192
unicorn_pci: ExchangeDelay=20
FmPollingRate=1000
g_RefGain=38
g_Teqmode=7
InitTimeout=20000
Interoperability=0
unicorn_pci: LCD_Trig=15000
LOS_LOF_Trig=5000
LoopbackMode=0
MswDebugLevel=2
RetryTime=5000
TrainingDelay=120
unicorn_pci: useRFC019v=0
useRFC029v=8000
useRFC040v=0
useRFC041v=1
setINITIALDAC=64
unicorn_pci: useRFCFixedRate=1
useVCXO=0
_no_TS652=0
unicorn_pci: driver parameters: DebugLevel=0
PCI: Enabling device 00:09.0 (0014 -> 0016)
unicorn_msw: FmPollingRate=1000ms,InitTimeout=20000ms,ActTimeout=300000
unicorn_msw: AMU: ECI PATCH DISABLED
unicorn_pci: AdslStatus=1
unicorn_msw: Current Modem State (3): ACTIVATING
unicorn_pci: MSW state: ACTIVATING
spurious 8259A interrupt: IRQ7.
unicorn_msw: Event Reported (3): Initializing
unicorn_pci: MSW event: TO INITIALIZING
unicorn_msw: Current Modem State (6): INITIALIZING
unicorn_pci: MSW state: INITIALIZING
unicorn_pci: upRate=377cells/s,downRate=1509cells/s
unicorn_pci: AdslStatus=1
unicorn_msw: Event Reported (4): Showtime
unicorn_pci: MSW event: AMSW SHOWTIME
unicorn_msw: Current Modem State (9): SHOWTIME_L0
unicorn_pci: MSW state: SHOWTIME L0
unicorn_atm: ESI=00:81:77:12:ec:73

RE: region size computed incorrectly

[Albert Cahalan]

On Mon, 2003-08-18 at 15:49, Grover, Andrew wrote:
> I was able to reproduce this. Putting LPCR in the HPET scope instead of
> the parent scope (by removing the ^s) seems to be a temporary
> workaround. We appear to be creating 2 LPCR objects, 1 of which is
> initialized correctly and 1 which is zeroed out. We look at the
> not-initialized one, and throw errors.
> 
> BTW PNP0103 is the HPET, High Precision Event Timer. I don't know how
> people are supposed to request PNP IDs these days, but the HPET spec
> says 0103, so I guess they got it. :)

Any hope for a fix? The 2.6.0-test5 kernel will be
using the HPET for timekeeping.




-------------------------------------------------------
This sf.net email is sponsored by:ThinkGeek
Welcome to geek heaven.
http://thinkgeek.com/sf