00:00.0 Host bridge: Transmeta Corporation LongRun Northbridge (rev 03) 00:00.1 RAM memory: Transmeta Corporation SDRAM controller 00:00.2 RAM memory: Transmeta Corporation BIOS scratchpad 00:03.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8139/8139C/8139C+ (rev 10) 00:04.0 FireWire (IEEE 1394): Lucent Microelectronics FW323 (rev 04) 00:05.0 CardBus bridge: Texas Instruments PCI1410 PC card Cardbus Controller (rev 02) 00:06.0 VGA compatible controller: Silicon Motion, Inc. SM720 Lynx3DM (rev b1) 00:07.0 ISA bridge: ALi Corporation M1533 PCI to ISA Bridge [Aladdin IV] 00:08.0 Multimedia audio controller: ALi Corporation M5451 PCI AC-Link Controller Audio Device (rev 01) 00:0f.0 IDE interface: ALi Corporation M5229 IDE (rev c3) 00:11.0 Bridge: ALi Corporation M7101 PMU 00:14.0 USB Controller: ALi Corporation USB 1.1 Controller (rev 03) Looking for DSDT in initrd ... found (at offset 445158)! tbget-0292: *** Info: Table [DSDT] replaced by host OS tbxface-0117 [03] acpi_load_tables : ACPI Tables successfully acquired Parsing all Control Methods:............................................................................................................... Table [DSDT](id F004) - 403 Objects with 37 Devices 111 Methods 16 Regions ACPI Namespace successfully loaded at root c036dffc evxfevnt-0093 [04] acpi_enable : Transition to ACPI mode successful evgpeblk-0748 [06] ev_create_gpe_block : GPE 00 to 63 [_GPE] 8 regs at 0000000000008018 on int 9 Completing Region/Field/Buffer/Package initialization:....................................................................... Initialized 16/16 Regions 0/0 Fields 33/33 Buffers 22/22 Packages (411 nodes) Executing all Device _STA and_INI methods:.........[ACPI Debug] String: LNK2_STA .[ACPI Debug] String: LNK3_STA .[ACPI Debug] String: LNK4_STA .[ACPI Debug] String: LNK5_STA .[ACPI Debug] String: LNK6_STA .[ACPI Debug] String: LNK7_STA .[ACPI Debug] String: LNK8_STA ....................... 38 Devices found containing: 38 _STA, 2 _INI methods ACPI: Interpreter enabled ACPI: Using PIC for interrupt routing ACPI: System [ACPI] (supports S0 S3 (swsusp) S4 S5) ACPI: PCI Root Bridge [PCI0] (00:00) PCI: Probing PCI hardware (bus 00) ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] ACPI: PCI Interrupt Link [LNK1] (IRQs 7) [ACPI Debug] String: LNK2_STA [ACPI Debug] String: LNK2_STA [ACPI Debug] String: LNK2_STA [ACPI Debug] String: LNK2_CRS ACPI: PCI Interrupt Link [LNK2] (IRQs *10) [ACPI Debug] String: LNK3_STA [ACPI Debug] String: LNK3_STA [ACPI Debug] String: LNK3_STA ACPI: PCI Interrupt Link [LNK3] (IRQs 10) [ACPI Debug] String: LNK4_STA [ACPI Debug] String: LNK4_STA [ACPI Debug] String: LNK4_STA [ACPI Debug] String: LNK4_CRS ACPI: PCI Interrupt Link [LNK4] (IRQs 6 7 10 11) [ACPI Debug] String: LNK5_STA [ACPI Debug] String: LNK5_STA [ACPI Debug] String: LNK5_STA ACPI: PCI Interrupt Link [LNK5] (IRQs 6 7 10 11) [ACPI Debug] String: LNK6_STA [ACPI Debug] String: LNK6_STA [ACPI Debug] String: LNK6_STA [ACPI Debug] String: LNK6_CRS ACPI: PCI Interrupt Link [LNK6] (IRQs 11) [ACPI Debug] String: LNK7_STA [ACPI Debug] String: LNK7_STA [ACPI Debug] String: LNK7_STA [ACPI Debug] String: LNK7_CRS ACPI: PCI Interrupt Link [LNK7] (IRQs *5) [ACPI Debug] String: LNK8_STA [ACPI Debug] String: LNK8_STA [ACPI Debug] String: LNK8_STA [ACPI Debug] String: LNK8_CRS ACPI: PCI Interrupt Link [LNK8] (IRQs 6) ACPI: PCI Interrupt Link [LNKU] (IRQs 11) ACPI: Power Resource [LRP0] (off) PCI: Probing PCI hardware ACPI: PCI Interrupt Link [LNK1] enabled at IRQ 7 [ACPI Debug] String: LNK6_SRS [ACPI Debug] String: LNK6_STA [ACPI Debug] String: LNK6_STA [ACPI Debug] String: LNK6_CRS ACPI: PCI Interrupt Link [LNK6] enabled at IRQ 10 [ACPI Debug] String: LNK3_SRS [ACPI Debug] String: LNK3_STA [ACPI Debug] String: LNK3_STA [ACPI Debug] String: LNK3_CRS ACPI: PCI Interrupt Link [LNK3] enabled at IRQ 10 [ACPI Debug] String: LNK2_SRS [ACPI Debug] String: LNK2_STA [ACPI Debug] String: LNK2_STA [ACPI Debug] String: LNK2_CRS ACPI: PCI Interrupt Link [LNK2] enabled at IRQ 10 [ACPI Debug] String: LNK8_SRS [ACPI Debug] String: LNK8_STA [ACPI Debug] String: LNK8_STA [ACPI Debug] String: LNK8_CRS ACPI: PCI Interrupt Link [LNK8] enabled at IRQ 5 pci_irq-0302 [32] acpi_pci_irq_derive : Unable to derive IRQ for device 00:0f.0 PCI: No IRQ known for interrupt pin A of device 00:0f.0 - using IRQ 255 ACPI: PCI Interrupt Link [LNKU] enabled at IRQ 5 PCI: Using ACPI for IRQ routing PCI: if you experience problems, try using option 'pci=noacpi' or even 'acpi=off' Linux NET4.0 for Linux 2.4 Based upon Swansea University Computer Society NET3.039 Initializing RT netlink socket Starting kswapd ACPI: AC Adapter [ACAD] (on-line) ACPI: Battery Slot [BAT0] (battery present) ACPI: Power Button (FF) [PWRF] ACPI: Processor [CPU0] (supports C1 C2 C3, 8 throttling states) ACPI: Thermal Zone [THRM] (66 C) vesafb: framebuffer at 0xf8200000, mapped to 0xd6802000, size 3072k ... CPU0 0: 170374 XT-PIC timer 1: 2498 XT-PIC keyboard 2: 0 XT-PIC cascade 5: 817 XT-PIC usb-ohci, ALI 5451 7: 760 XT-PIC eth0 8: 2 XT-PIC rtc 9: 0 XT-PIC acpi 10: 757 XT-PIC ohci1394, i82365 14: 4363 XT-PIC ide0 NMI: 0 ERR: 0