acpi on medion laptop

acpi on medion laptop

[nicolas.olivero-39ZsbGIQGT5GWvitb5QawA]

Hello,
I have some problems to make work acpi on my new laptop.
I have just install mandrake9.2.
In order to have acpi, i compile my own kernel 2.4.22 with the last
patch acpi.
 
extraxt of my .config :
#
# ACPI Support
#
CONFIG_ACPI=y
CONFIG_ACPI_BOOT=y
CONFIG_ACPI_BUS=y
CONFIG_ACPI_INTERPRETER=y
CONFIG_ACPI_EC=y
CONFIG_ACPI_POWER=y
CONFIG_ACPI_PCI=y
CONFIG_ACPI_SLEEP=y
CONFIG_ACPI_SYSTEM=y
CONFIG_ACPI_AC=y
CONFIG_ACPI_BATTERY=y
CONFIG_ACPI_BUTTON=y
CONFIG_ACPI_FAN=y
CONFIG_ACPI_PROCESSOR=y
CONFIG_ACPI_THERMAL=y
# CONFIG_ACPI_ASUS is not set
# CONFIG_ACPI_TOSHIBA is not set
CONFIG_ACPI_DEBUG=y
# CONFIG_ACPI_RELAXED_AML is not set
 
After booting on my new kernel, i notice that my fan works less often
than before and as i can't see the temperature i'm anxious for my laptop....
 
The good thing is that now i can see the level of my battery .
 
[root@localhost han]# acpi -V
     Battery 1: charging, 88%, 00:50:20 until charged
No support for device type: thermal
  AC Adapter 1: on-line
 
[root@localhost han]# acpid
acpid: can't open /proc/acpi/event: Device or resource busy
 
[root@localhost han]# modprobe thermal
modprobe: Can't locate module thermal
 
 
But i can't see the temperature of my computer...
How can i make this work fine?
 
Here is my dmesg log
 
Thanks for any help.
 
[root@localhost han]# dmesg | grep ACPI
 BIOS-e820: 000000000dff0000 - 000000000dffffc0 (ACPI data)
 BIOS-e820: 000000000dffffc0 - 000000000e000000 (ACPI NVS)
ACPI: have wakeup address 0xc0001000
ACPI: RSDP (v000 OID_00                                    ) @ 0x000e5010
ACPI: RSDT (v001 INSYDE RSDT_000 0x00000001 _CSI 0x00010100) @ 0x0dfffbc0
ACPI: FADT (v001 INSYDE FACP_000 0x00000100 _CSI 0x00010100) @ 0x0dfffac0
ACPI: BOOT (v001 INSYDE SYS_BOOT 0x00000100 _CSI 0x00010100) @ 0x0dfffb50
ACPI: DBGP (v001 INSYDE DBGP_000 0x00000100 _CSI 0x00010100) @ 0x0dfffb80
ACPI: DSDT (v001 INSYDE   VT8372 0x00001000 INTL 0x02002025) @ 0x00000000
ACPI: Subsystem revision 20030918
 tbxface-0117 [03] acpi_load_tables      : ACPI Tables successfully acquired
ACPI Namespace successfully loaded at root c02d6e7c
evxfevnt-0093 [04] acpi_enable           : Transition to ACPI mode successful
Executing all Device _STA and_INI methods:...................................... [ACPI Debug] String: LPT_STA
.[ACPI Debug] String: ECP_STA
.[ACPI Debug] String: FIR_STA
ACPI: Interpreter enabled
ACPI: Using PIC for interrupt routing
ACPI: System [ACPI] (supports S0 S3 S4 S5)
ACPI: PCI Root Bridge [PCI0] (00:00)
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ACPI Debug] String: LPT_STA
[ACPI Debug] String: ECP_STA
[ACPI Debug] String: ECP_STA
[ACPI Debug] String: FIR_STA
[ACPI Debug] String: FIR_STA
ACPI: Embedded Controller [EC0] (gpe 5)
ACPI: PCI Interrupt Link [LNKA] (IRQs *10)
ACPI: PCI Interrupt Link [LNKB] (IRQs *11)
ACPI: PCI Interrupt Link [LNKC] (IRQs *5)
ACPI: PCI Interrupt Link [LNKD] (IRQs *11)
[ACPI Debug] Integer: 0000000000000001
ACPI: AC Adapter [AC] (on-line)
[ACPI Debug] Integer: 000000000000001F
[ACPI Debug] Package: Elements Ptr - c12aa6e8
ACPI: Battery Slot [BAT0] (battery present)
ACPI: Power Button (FF) [PWRF]
ACPI: Sleep Button (CM) [SBTN]
ACPI: Lid Switch [LID]
ACPI: Processor [CPU0] (supports C1 C2)
[ACPI Debug] Package: Elements Ptr - c12d49e8
[ACPI Debug] Package: Elements Ptr - c12d49e8
[ACPI Debug] Package: Elements Ptr - cb574c68
[ACPI Debug] Package: Elements Ptr - cb5743e8
[ACPI Debug] Package: Elements Ptr - c12d49e8
[ACPI Debug] Package: Elements Ptr - c12d49e8
[ACPI Debug] Package: Elements Ptr - cb574ce8
[ACPI Debug] Package: Elements Ptr - cb5749e8
[ACPI Debug] Package: Elements Ptr - c12d49e8
[ACPI Debug] Package: Elements Ptr - c12d49e8
[ACPI Debug] Package: Elements Ptr - cb5749e8
[ACPI Debug] Package: Elements Ptr - cb5743e8
[ACPI Debug] Package: Elements Ptr - c12d49e8
[ACPI Debug] Package: Elements Ptr - c12d49e8
[ACPI Debug] Package: Elements Ptr - cb5749e8
[ACPI Debug] Package: Elements Ptr - cb574ce8
[ACPI Debug] Integer: 0000000000000001


-------------------------------------------------------
This SF.net email sponsored by: Enterprise Linux Forum Conference & Expo
The Event For Linux Datacenter Solutions & Strategies in The Enterprise 
Linux in the Boardroom; in the Front Office; & in the Server Room 
http://www.enterpriselinuxforum.com

Re: acpi on medion laptop

[Yury Umanets]

nicolas.olivero-39ZsbGIQGT5GWvitb5QawA@public.gmane.org wrote:

>Hello,
>I have some problems to make work acpi on my new laptop.
>I have just install mandrake9.2.
>In order to have acpi, i compile my own kernel 2.4.22 with the last
>patch acpi.
> 
>extraxt of my .config :
>#
># ACPI Support
>#
>CONFIG_ACPI=y
>CONFIG_ACPI_BOOT=y
>CONFIG_ACPI_BUS=y
>CONFIG_ACPI_INTERPRETER=y
>CONFIG_ACPI_EC=y
>CONFIG_ACPI_POWER=y
>CONFIG_ACPI_PCI=y
>CONFIG_ACPI_SLEEP=y
>CONFIG_ACPI_SYSTEM=y
>CONFIG_ACPI_AC=y
>CONFIG_ACPI_BATTERY=y
>CONFIG_ACPI_BUTTON=y
>CONFIG_ACPI_FAN=y
>CONFIG_ACPI_PROCESSOR=y
>CONFIG_ACPI_THERMAL=y
># CONFIG_ACPI_ASUS is not set
># CONFIG_ACPI_TOSHIBA is not set
>CONFIG_ACPI_DEBUG=y
># CONFIG_ACPI_RELAXED_AML is not set
> 
>After booting on my new kernel, i notice that my fan works less often
>than before and as i can't see the temperature i'm anxious for my laptop....
> 
>The good thing is that now i can see the level of my battery .
> 
>[root@localhost han]# acpi -V
>     Battery 1: charging, 88%, 00:50:20 until charged
>No support for device type: thermal
>  AC Adapter 1: on-line
> 
>[root@localhost han]# acpid
>acpid: can't open /proc/acpi/event: Device or resource busy
> 
>[root@localhost han]# modprobe thermal
>modprobe: Can't locate module thermal
> 
> 
>But i can't see the temperature of my computer...
>How can i make this work fine?
> 
>Here is my dmesg log
> 
>Thanks for any help.
> 
>[root@localhost han]# dmesg | grep ACPI
> BIOS-e820: 000000000dff0000 - 000000000dffffc0 (ACPI data)
> BIOS-e820: 000000000dffffc0 - 000000000e000000 (ACPI NVS)
>ACPI: have wakeup address 0xc0001000
>ACPI: RSDP (v000 OID_00                                    ) @ 0x000e5010
>ACPI: RSDT (v001 INSYDE RSDT_000 0x00000001 _CSI 0x00010100) @ 0x0dfffbc0
>ACPI: FADT (v001 INSYDE FACP_000 0x00000100 _CSI 0x00010100) @ 0x0dfffac0
>ACPI: BOOT (v001 INSYDE SYS_BOOT 0x00000100 _CSI 0x00010100) @ 0x0dfffb50
>ACPI: DBGP (v001 INSYDE DBGP_000 0x00000100 _CSI 0x00010100) @ 0x0dfffb80
>ACPI: DSDT (v001 INSYDE   VT8372 0x00001000 INTL 0x02002025) @ 0x00000000
>ACPI: Subsystem revision 20030918
> tbxface-0117 [03] acpi_load_tables      : ACPI Tables successfully acquired
>ACPI Namespace successfully loaded at root c02d6e7c
>evxfevnt-0093 [04] acpi_enable           : Transition to ACPI mode successful
>Executing all Device _STA and_INI methods:...................................... [ACPI Debug] String: LPT_STA
>.[ACPI Debug] String: ECP_STA
>.[ACPI Debug] String: FIR_STA
>ACPI: Interpreter enabled
>ACPI: Using PIC for interrupt routing
>ACPI: System [ACPI] (supports S0 S3 S4 S5)
>ACPI: PCI Root Bridge [PCI0] (00:00)
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
>[ACPI Debug] String: LPT_STA
>[ACPI Debug] String: ECP_STA
>[ACPI Debug] String: ECP_STA
>[ACPI Debug] String: FIR_STA
>[ACPI Debug] String: FIR_STA
>ACPI: Embedded Controller [EC0] (gpe 5)
>ACPI: PCI Interrupt Link [LNKA] (IRQs *10)
>ACPI: PCI Interrupt Link [LNKB] (IRQs *11)
>ACPI: PCI Interrupt Link [LNKC] (IRQs *5)
>ACPI: PCI Interrupt Link [LNKD] (IRQs *11)
>[ACPI Debug] Integer: 0000000000000001
>ACPI: AC Adapter [AC] (on-line)
>[ACPI Debug] Integer: 000000000000001F
>[ACPI Debug] Package: Elements Ptr - c12aa6e8
>ACPI: Battery Slot [BAT0] (battery present)
>ACPI: Power Button (FF) [PWRF]
>ACPI: Sleep Button (CM) [SBTN]
>ACPI: Lid Switch [LID]
>ACPI: Processor [CPU0] (supports C1 C2)
>[ACPI Debug] Package: Elements Ptr - c12d49e8
>[ACPI Debug] Package: Elements Ptr - c12d49e8
>[ACPI Debug] Package: Elements Ptr - cb574c68
>[ACPI Debug] Package: Elements Ptr - cb5743e8
>[ACPI Debug] Package: Elements Ptr - c12d49e8
>[ACPI Debug] Package: Elements Ptr - c12d49e8
>[ACPI Debug] Package: Elements Ptr - cb574ce8
>[ACPI Debug] Package: Elements Ptr - cb5749e8
>[ACPI Debug] Package: Elements Ptr - c12d49e8
>[ACPI Debug] Package: Elements Ptr - c12d49e8
>[ACPI Debug] Package: Elements Ptr - cb5749e8
>[ACPI Debug] Package: Elements Ptr - cb5743e8
>[ACPI Debug] Package: Elements Ptr - c12d49e8
>[ACPI Debug] Package: Elements Ptr - c12d49e8
>[ACPI Debug] Package: Elements Ptr - cb5749e8
>[ACPI Debug] Package: Elements Ptr - cb574ce8
>[ACPI Debug] Integer: 0000000000000001
>
>
>-------------------------------------------------------
>This SF.net email sponsored by: Enterprise Linux Forum Conference & Expo
>The Event For Linux Datacenter Solutions & Strategies in The Enterprise 
>Linux in the Boardroom; in the Front Office; & in the Server Room 
>http://www.enterpriselinuxforum.com
>_______________________________________________
>Acpi-devel mailing list
>Acpi-devel-5NWGOfrQmneRv+LV9MX5uipxlwaOVQ5f@public.gmane.org
>https://lists.sourceforge.net/lists/listinfo/acpi-devel
>
>
>  
>
Hello!

I have ASUS M3700N laptop. And I have experienced problems like you 
yours. The cure is one of the following:
(1) Use last 2.4.23 kernel and make sure, that you have applied last 
acpi patch (or it contains it inside).
(2) Use last 2.6.0 kernel. Everything is working fine now.

-- 
umka




-------------------------------------------------------
This SF.net email sponsored by: Enterprise Linux Forum Conference & Expo
The Event For Linux Datacenter Solutions & Strategies in The Enterprise 
Linux in the Boardroom; in the Front Office; & in the Server Room 
http://www.enterpriselinuxforum.com

Re: Re: acpi on medion laptop

[Nicolas Olivero]

hello, 
first thanks for trying to help me....
I compiled both kernel 2.4.23 and 2.6.0 but i still have the same problem.
acpi works for my battery, i can see its level, but i can't see the thermal, fan informations :( 
another idea to resolve my problem?

does it mean that my processor is in danger? i think my fan works less often than before without acpi...

thanks for any help!


-------------------------------------------------------
This SF.net email sponsored by: Enterprise Linux Forum Conference & Expo
The Event For Linux Datacenter Solutions & Strategies in The Enterprise 
Linux in the Boardroom; in the Front Office; & in the Server Room 
http://www.enterpriselinuxforum.com

Re: acpi on medion laptop

[Yury Umanets]

Nicolas Olivero wrote:

>hello, 
>first thanks for trying to help me....
>I compiled both kernel 2.4.23 and 2.6.0 but i still have the same problem.
>acpi works for my battery, i can see its level, but i can't see the thermal, fan informations :( 
>another idea to resolve my problem?
>
>does it mean that my processor is in danger? i think my fan works less often than before without acpi...
>
>thanks for any help!
>
>
>  
>
You can also try to modify your DSDT. Take a look to acpi.sf.net. Read 
all sections. Try advices. I have spent lots of time before set up my 
laptop :)

-- 
umka




-------------------------------------------------------
This SF.net email sponsored by: Enterprise Linux Forum Conference & Expo
The Event For Linux Datacenter Solutions & Strategies in The Enterprise 
Linux in the Boardroom; in the Front Office; & in the Server Room 
http://www.enterpriselinuxforum.com