* AE_AML_REGION_LIMIT trouble
@ 2003-10-19 13:24 Eric
[not found] ` <3F929082.40406-hi6Y0CQ0nG0@public.gmane.org>
0 siblings, 1 reply; 3+ messages in thread
From: Eric @ 2003-10-19 13:24 UTC (permalink / raw)
To: acpi-devel-5NWGOfrQmneRv+LV9MX5uipxlwaOVQ5f
Greetings everyone on this mailinglist,
I seem to be having a small ACPI problem, of which I don't really know
what it exactly means,
or what I can do to fix it. I'm running linux kernel 2.6.0-test8 and
I've seen this error from as early as
2.6.0-test1. The machine is a MSI-6728 motherboard with a P4 (with HT)
on it. Below I've put the output of dmesg (up to where acpi messages stop).
Please let me know if there is anything else you might be interested in
to clarify this situation because I'm really curious if this is BIOS problem
or a possible bug in the ACPI code.
with kind regards,
Eric
(error statement and partial dmesg output below)
eric@pathfinder:~$ dmesg |grep AML
ACPI-1120: *** Error: Method execution failed [\_SB_.PCI0.MDET]
(Node dffee8c0), AE_AML_REGION_LIMIT
ACPI-1120: *** Error: Method execution failed [\_SB_.PCI0._CRS]
(Node dffee9c0), AE_AML_REGION_LIMIT
ACPI-0098: *** Error: Method execution failed [\_SB_.PCI0._CRS]
(Node dffee9c0), AE_AML_REGION_LIMIT
the output of dmesg:
hm, page 000fc000 reserved twice.
hm, page 000f5000 reserved twice.
hm, page 000f6000 reserved twice.
On node 0 totalpages: 131056
DMA zone: 4096 pages, LIFO batch:1
Normal zone: 126960 pages, LIFO batch:16
HighMem zone: 0 pages, LIFO batch:1
DMI 2.3 present.
ACPI: RSDP (v000 AMI ) @ 0x000f9e50
ACPI: RSDT (v001 AMIINT INTEL865 0x00000010 MSFT 0x00000097) @ 0x1fff0000
ACPI: FADT (v001 AMIINT INTEL865 0x00000011 MSFT 0x00000097) @ 0x1fff0030
ACPI: MADT (v001 AMIINT INTEL865 0x00000009 MSFT 0x00000097) @ 0x1fff00c0
ACPI: DSDT (v001 INTEL I865G 0x00001000 MSFT 0x0100000d) @ 0x00000000
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
Processor #0 15:2 APIC version 20
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
Processor #1 15:2 APIC version 20
ACPI: IOAPIC (id[0x02] address[0xfec00000] global_irq_base[0x0])
IOAPIC[0]: Assigned apic_id 2
IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, IRQ 0-23
ACPI: INT_SRC_OVR (bus[0] irq[0x0] global_irq[0x2] polarity[0x0]
trigger[0x0])
ACPI: INT_SRC_OVR (bus[0] irq[0x9] global_irq[0x14] polarity[0x3]
trigger[0x3])
Enabling APIC mode: Flat. Using 1 I/O APICs
Using ACPI (MADT) for SMP configuration information
Building zonelist for node : 0
Kernel command line: root=/dev/hdb2
Initializing CPU#0
PID hash table entries: 2048 (order 11: 16384 bytes)
Detected 2434.338 MHz processor.
Console: colour VGA+ 80x25
Memory: 514964k/524224k available (2189k kernel code, 8516k reserved,
670k data, 156k init, 0k highmem)
Calibrating delay loop... 4800.51 BogoMIPS
Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
Mount-cache hash table entries: 512 (order: 0, 4096 bytes)
CPU: After generic identify, caps: bfebfbff 00000000 00000000 00000000
CPU: After vendor identify, caps: bfebfbff 00000000 00000000 00000000
CPU: Trace cache: 12K uops, L1 D cache: 8K
CPU: L2 cache: 512K
CPU: Physical Processor ID: 0
CPU: After all inits, caps: bfebfbff 00000000 00000000 00000080
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
CPU#0: Intel P4/Xeon Extended MCE MSRs (12) available
CPU#0: Thermal monitoring enabled
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Checking 'hlt' instruction... OK.
POSIX conformance testing by UNIFIX
CPU0: Intel(R) Pentium(R) 4 CPU 2.40GHz stepping 09
per-CPU timeslice cutoff: 1462.88 usecs.
task migration cache decay timeout: 2 msecs.
enabled ExtINT on CPU#0
ESR value before enabling vector: 00000000
ESR value after enabling vector: 00000000
Booting processor 1/1 eip 2000
Initializing CPU#1
masked ExtINT on CPU#1
ESR value before enabling vector: 00000000
ESR value after enabling vector: 00000000
Calibrating delay loop... 4849.66 BogoMIPS
CPU: After generic identify, caps: bfebfbff 00000000 00000000 00000000
CPU: After vendor identify, caps: bfebfbff 00000000 00000000 00000000
CPU: Trace cache: 12K uops, L1 D cache: 8K
CPU: L2 cache: 512K
CPU: Physical Processor ID: 0
CPU: After all inits, caps: bfebfbff 00000000 00000000 00000080
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#1.
CPU#1: Intel P4/Xeon Extended MCE MSRs (12) available
CPU#1: Thermal monitoring enabled
CPU1: Intel(R) Pentium(R) 4 CPU 2.40GHz stepping 09
Total of 2 processors activated (9650.17 BogoMIPS).
cpu_sibling_map[0] = 1
cpu_sibling_map[1] = 0
ENABLING IO-APIC IRQs
init IO_APIC IRQs
IO-APIC (apicid-pin) 2-0, 2-9, 2-16, 2-17, 2-18, 2-19, 2-21, 2-22, 2-23
not connected.
..TIMER: vector=0x31 pin1=2 pin2=-1
number of MP IRQ sources: 15.
number of IO-APIC #2 registers: 24.
testing the IO APIC.......................
IO APIC #2......
.... register #00: 02000000
....... : physical APIC id: 02
....... : Delivery Type: 0
....... : LTS : 0
.... register #01: 00178020
....... : max redirection entries: 0017
....... : PRQ implemented: 1
....... : IO APIC version: 0020
.... IRQ redirection table:
NR Log Phy Mask Trig IRR Pol Stat Dest Deli Vect:
00 000 00 1 0 0 0 0 0 0 00
01 001 01 0 0 0 0 0 1 1 39
02 001 01 0 0 0 0 0 1 1 31
03 001 01 0 0 0 0 0 1 1 41
04 001 01 0 0 0 0 0 1 1 49
05 001 01 0 0 0 0 0 1 1 51
06 001 01 0 0 0 0 0 1 1 59
07 001 01 0 0 0 0 0 1 1 61
08 001 01 0 0 0 0 0 1 1 69
09 000 00 1 0 0 0 0 0 0 00
0a 001 01 0 0 0 0 0 1 1 71
0b 001 01 0 0 0 0 0 1 1 79
0c 001 01 0 0 0 0 0 1 1 81
0d 001 01 0 0 0 0 0 1 1 89
0e 001 01 0 0 0 0 0 1 1 91
0f 001 01 0 0 0 0 0 1 1 99
10 000 00 1 0 0 0 0 0 0 00
11 000 00 1 0 0 0 0 0 0 00
12 000 00 1 0 0 0 0 0 0 00
13 000 00 1 0 0 0 0 0 0 00
14 001 01 1 1 0 1 0 1 1 A1
15 000 00 1 0 0 0 0 0 0 00
16 000 00 1 0 0 0 0 0 0 00
17 000 00 1 0 0 0 0 0 0 00
IRQ to pin mappings:
IRQ0 -> 0:2
IRQ1 -> 0:1
IRQ3 -> 0:3
IRQ4 -> 0:4
IRQ5 -> 0:5
IRQ6 -> 0:6
IRQ7 -> 0:7
IRQ8 -> 0:8
IRQ9 -> 0:20
IRQ10 -> 0:10
IRQ11 -> 0:11
IRQ12 -> 0:12
IRQ13 -> 0:13
IRQ14 -> 0:14
IRQ15 -> 0:15
.................................... done.
Using local APIC timer interrupts.
calibrating APIC timer ...
..... CPU clock speed is 2433.0669 MHz.
..... host bus clock speed is 202.0805 MHz.
checking TSC synchronization across 2 CPUs: passed.
Starting migration thread for cpu 0
Bringing up 1
CPU 1 IS NOW UP!
Starting migration thread for cpu 1
CPUS done 2
NET: Registered protocol family 16
PCI: PCI BIOS revision 2.10 entry at 0xfdb81, last bus=2
PCI: Using configuration type 1
mtrr: v2.0 (20020519)
ACPI: Subsystem revision 20031002
IOAPIC[0]: Set PCI routing entry (2-20 -> 0xa9 -> IRQ 20 Mode:1 Active:1)
ACPI: Interpreter enabled
ACPI: Using IOAPIC for interrupt routing
ACPI-1120: *** Error: Method execution failed [\_SB_.PCI0.MDET]
(Node dffee8c0), AE_AML_REGION_LIMIT
ACPI-1120: *** Error: Method execution failed [\_SB_.PCI0._CRS]
(Node dffee9c0), AE_AML_REGION_LIMIT
ACPI-0098: *** Error: Method execution failed [\_SB_.PCI0._CRS]
(Node dffee9c0), AE_AML_REGION_LIMIT
ACPI: PCI Root Bridge [PCI0] (00:00)
PCI: Probing PCI hardware (bus 00)
PCI: Ignoring BAR0-3 of IDE controller 0000:00:1f.1
Transparent bridge - 0000:00:1e.0
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.ICHB._PRT]
ACPI: Power Resource [URP1] (off)
ACPI: Power Resource [URP2] (off)
ACPI: Power Resource [FDDP] (off)
ACPI: Power Resource [LPTP] (off)
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 *5 6 7 9 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 *9 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 9 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 9 *10 11 12 14 15)
SCSI subsystem initialized
drivers/usb/core/usb.c: registered new driver usbfs
drivers/usb/core/usb.c: registered new driver hub
IOAPIC[0]: Set PCI routing entry (2-18 -> 0xb1 -> IRQ 18 Mode:1 Active:1)
00:00:1f[A] -> 2-18 -> IRQ 18
IOAPIC[0]: Set PCI routing entry (2-17 -> 0xb9 -> IRQ 17 Mode:1 Active:1)
00:00:1f[B] -> 2-17 -> IRQ 17
IOAPIC[0]: Set PCI routing entry (2-16 -> 0xc1 -> IRQ 16 Mode:1 Active:1)
00:00:1d[A] -> 2-16 -> IRQ 16
IOAPIC[0]: Set PCI routing entry (2-19 -> 0xc9 -> IRQ 19 Mode:1 Active:1)
00:00:1d[B] -> 2-19 -> IRQ 19
Pin 2-18 already programmed
IOAPIC[0]: Set PCI routing entry (2-23 -> 0xd1 -> IRQ 23 Mode:1 Active:1)
00:00:1d[D] -> 2-23 -> IRQ 23
Pin 2-16 already programmed
Pin 2-17 already programmed
Pin 2-16 already programmed
Pin 2-18 already programmed
Pin 2-16 already programmed
Pin 2-17 already programmed
Pin 2-18 already programmed
Pin 2-19 already programmed
Pin 2-17 already programmed
Pin 2-18 already programmed
Pin 2-19 already programmed
Pin 2-16 already programmed
Pin 2-18 already programmed
Pin 2-19 already programmed
Pin 2-16 already programmed
Pin 2-17 already programmed
Pin 2-19 already programmed
Pin 2-16 already programmed
Pin 2-17 already programmed
Pin 2-18 already programmed
Pin 2-17 already programmed
Pin 2-18 already programmed
Pin 2-19 already programmed
Pin 2-16 already programmed
Pin 2-16 already programmed
Pin 2-17 already programmed
Pin 2-18 already programmed
Pin 2-19 already programmed
IOAPIC[0]: Set PCI routing entry (2-21 -> 0xd9 -> IRQ 21 Mode:1 Active:1)
00:02:09[B] -> 2-21 -> IRQ 21
IOAPIC[0]: Set PCI routing entry (2-22 -> 0xe1 -> IRQ 22 Mode:1 Active:1)
00:02:09[C] -> 2-22 -> IRQ 22
Pin 2-23 already programmed
Pin 2-21 already programmed
PCI: Using ACPI for IRQ routing
PCI: if you experience problems, try using option 'pci=noacpi' or even
'acpi=off'
Machine check exception polling timer started.
Starting balanced_irq
Initializing Cryptographic API
ACPI: Power Button (FF) [PWRF]
ACPI: Processor [CPU1] (supports C1, 8 throttling states)
ACPI: Processor [CPU2] (supports C1, 8 throttling states)
-------------------------------------------------------
This SF.net email sponsored by: Enterprise Linux Forum Conference & Expo
The Event For Linux Datacenter Solutions & Strategies in The Enterprise
Linux in the Boardroom; in the Front Office; & in the Server Room
http://www.enterpriselinuxforum.com
^ permalink raw reply [flat|nested] 3+ messages in thread
* Re: AE_AML_REGION_LIMIT trouble
[not found] ` <3F929082.40406-hi6Y0CQ0nG0@public.gmane.org>
@ 2003-10-24 15:52 ` Ducrot Bruno
0 siblings, 0 replies; 3+ messages in thread
From: Ducrot Bruno @ 2003-10-24 15:52 UTC (permalink / raw)
To: Eric, Moore, Robert; +Cc: acpi-devel-5NWGOfrQmneRv+LV9MX5uipxlwaOVQ5f
On Sun, Oct 19, 2003 at 03:24:18PM +0200, Eric wrote:
> Greetings everyone on this mailinglist,
>
> I seem to be having a small ACPI problem, of which I don't really know
> what it exactly means,
> or what I can do to fix it. I'm running linux kernel 2.6.0-test8 and
> I've seen this error from as early as
> 2.6.0-test1. The machine is a MSI-6728 motherboard with a P4 (with HT)
> on it. Below I've put the output of dmesg (up to where acpi messages stop).
> Please let me know if there is anything else you might be interested in
> to clarify this situation because I'm really curious if this is BIOS problem
> or a possible bug in the ACPI code.
>
You have that in your ASL:
OperationRegion (TMEM, PCI_Config, 0xC4, 0x02)
Field (TMEM, ByteAcc, NoLock, Preserve)
{
, 3,
TOUD, 13
}
Name (TOM, 0x00)
Method (MDET, 0, NotSerialized)
{
If (TOM) {}
Else
{
If (FLAG)
{
ShiftLeft (TOUD, 0x13, TOM)
}
Else
{
Return (0x20000000)
}
}
Return (TOM)
}
I am pretty sure that the root of your trouble is
the 'ShiftLeft (TOUD, 0x13, TOM)'.
(For info, FLAG is declared as Name (FLAG, 0x01), so
that is not the problem as well).
I think it is valid, and suspect more or less there is
a bug in ACPICA. But I am not sure. If a guru
can help me to determine that I am right or wrong (Bob?).
Cheers,
--
Ducrot Bruno
-- Which is worse: ignorance or apathy?
-- Don't know. Don't care.
-------------------------------------------------------
This SF.net email is sponsored by: The SF.net Donation Program.
Do you like what SourceForge.net is doing for the Open
Source Community? Make a contribution, and help us add new
features and functionality. Click here: http://sourceforge.net/donate/
^ permalink raw reply [flat|nested] 3+ messages in thread
* RE: AE_AML_REGION_LIMIT trouble
@ 2003-10-24 16:14 Moore, Robert
0 siblings, 0 replies; 3+ messages in thread
From: Moore, Robert @ 2003-10-24 16:14 UTC (permalink / raw)
To: Ducrot Bruno, Eric; +Cc: acpi-devel-5NWGOfrQmneRv+LV9MX5uipxlwaOVQ5f
Looks like a problem, I was able to reproduce it with the code below. I
will look into it.
Bob
-----Original Message-----
From: Ducrot Bruno [mailto:ducrot-kk6yZipjEM5g9hUCZPvPmw@public.gmane.org]
Sent: Friday, October 24, 2003 8:52 AM
To: Eric; Moore, Robert
Cc: acpi-devel-5NWGOfrQmneRv+LV9MX5uipxlwaOVQ5f@public.gmane.org
Subject: Re: [ACPI] AE_AML_REGION_LIMIT trouble
On Sun, Oct 19, 2003 at 03:24:18PM +0200, Eric wrote:
> Greetings everyone on this mailinglist,
>
> I seem to be having a small ACPI problem, of which I don't really know
> what it exactly means,
> or what I can do to fix it. I'm running linux kernel 2.6.0-test8 and
> I've seen this error from as early as
> 2.6.0-test1. The machine is a MSI-6728 motherboard with a P4 (with HT)
> on it. Below I've put the output of dmesg (up to where acpi messages
stop).
> Please let me know if there is anything else you might be interested
in
> to clarify this situation because I'm really curious if this is BIOS
problem
> or a possible bug in the ACPI code.
>
You have that in your ASL:
OperationRegion (TMEM, PCI_Config, 0xC4, 0x02)
Field (TMEM, ByteAcc, NoLock, Preserve)
{
, 3,
TOUD, 13
}
Name (TOM, 0x00)
Method (MDET, 0, NotSerialized)
{
If (TOM) {}
Else
{
If (FLAG)
{
ShiftLeft (TOUD, 0x13, TOM)
}
Else
{
Return (0x20000000)
}
}
Return (TOM)
}
I am pretty sure that the root of your trouble is
the 'ShiftLeft (TOUD, 0x13, TOM)'.
(For info, FLAG is declared as Name (FLAG, 0x01), so
that is not the problem as well).
I think it is valid, and suspect more or less there is
a bug in ACPICA. But I am not sure. If a guru
can help me to determine that I am right or wrong (Bob?).
Cheers,
--
Ducrot Bruno
-- Which is worse: ignorance or apathy?
-- Don't know. Don't care.
-------------------------------------------------------
This SF.net email is sponsored by: The SF.net Donation Program.
Do you like what SourceForge.net is doing for the Open
Source Community? Make a contribution, and help us add new
features and functionality. Click here: http://sourceforge.net/donate/
^ permalink raw reply [flat|nested] 3+ messages in thread
end of thread, other threads:[~2003-10-24 16:14 UTC | newest]
Thread overview: 3+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2003-10-19 13:24 AE_AML_REGION_LIMIT trouble Eric
[not found] ` <3F929082.40406-hi6Y0CQ0nG0@public.gmane.org>
2003-10-24 15:52 ` Ducrot Bruno
-- strict thread matches above, loose matches on Subject: below --
2003-10-24 16:14 Moore, Robert
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox