public inbox for linux-acpi@vger.kernel.org
 help / color / mirror / Atom feed
* ASUS M3N (Centrino) & kernel 2.6.0-test8
@ 2003-10-23 22:31 Luca Capello
       [not found] ` <3F9856B8.3080103-wlebWZzHoyE@public.gmane.org>
  0 siblings, 1 reply; 3+ messages in thread
From: Luca Capello @ 2003-10-23 22:31 UTC (permalink / raw)
  To: ML ACPI-devel

[-- Attachment #1: Type: text/plain, Size: 1080 bytes --]

Hello,

I downloaded the last kernel 2.6.0-test8 and the last ACPI patched for 
it. I successfully installed it and it works perfectly, just I get the 
same "osl / AE_TIME" error I get on kernel 2.4.21, where it was called 
"osl-8888" and not "osl-8892" (I attached the dmesg to see the exact 
error message). More, there's another error: "utmisc-0745" that IIRC 
I've never had on kernel 2.4.21.

The first error causes some big problems on kernel 2.4.21: first of all, 
if you works on battery mode it doesn't occurs, while it starts suddenly 
after you plug the AC-adapter in (or you boot with the AC-adapter 
plugged-in). Once it occurs, the keyboard doesn't answer at all for 5min 
and as the error occurs quite every 5/10min, it's a real problem, as I 
need to work with my notebook all the day. On kernel 2.6.0-test8 I've 
always the same problem, but now the keyboard  doesn't answer for 15/30 
seconds, so it's better.

The problem is surely related to "osl.c", but as I not a programmer, I 
can't correct it. Anyway, Í'm here if you need tester.

Thx, bye,
Gismo / Luca

[-- Attachment #2: dmesg_2.6.0-test8_20031024 --]
[-- Type: text/plain, Size: 13029 bytes --]

Linux version 2.6.0-test8 (root@gismo) (gcc version 3.3.2 (Debian)) #1 Fri Oct 24 00:01:06 CEST 2003
Video mode to be used for restore is 317
BIOS-provided physical RAM map:
 BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
 BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
 BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
 BIOS-e820: 0000000000100000 - 000000001f740000 (usable)
 BIOS-e820: 000000001f740000 - 000000001f750000 (ACPI data)
 BIOS-e820: 000000001f750000 - 000000001f800000 (ACPI NVS)
503MB LOWMEM available.
On node 0 totalpages: 128832
  DMA zone: 4096 pages, LIFO batch:1
  Normal zone: 124736 pages, LIFO batch:16
  HighMem zone: 0 pages, LIFO batch:1
DMI 2.3 present.
ACPI: RSDP (v000 ACPIAM                                    ) @ 0x000f4b70
ACPI: RSDT (v001 A M I  OEMRSDT  0x05000314 MSFT 0x00000097) @ 0x1f740000
ACPI: FADT (v002 A M I  OEMFACP  0x05000314 MSFT 0x00000097) @ 0x1f740200
ACPI: OEMB (v001 A M I  OEMBIOS  0x05000314 MSFT 0x00000097) @ 0x1f750040
ACPI: DSDT (v001  0ABBD 0ABBD001 0x00000001 MSFT 0x0100000d) @ 0x00000000
Building zonelist for node : 0
Kernel command line: BOOT_IMAGE=260 ro root=304
Initializing CPU#0
PID hash table entries: 2048 (order 11: 16384 bytes)
Detected 1300.226 MHz processor.
Console: colour dummy device 80x25
Memory: 505844k/515328k available (2248k kernel code, 8712k reserved, 969k data, 136k init, 0k highmem)
Calibrating delay loop... 2572.28 BogoMIPS
Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
Mount-cache hash table entries: 512 (order: 0, 4096 bytes)
CPU:     After generic identify, caps: a7e9fbbf 00000000 00000000 00000000
CPU:     After vendor identify, caps: a7e9fbbf 00000000 00000000 00000000
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 1024K
CPU:     After all inits, caps: a7e9fbbf 00000000 00000000 00000040
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
CPU: Intel(R) Pentium(R) M processor 1300MHz stepping 05
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Checking 'hlt' instruction... OK.
POSIX conformance testing by UNIFIX
NET: Registered protocol family 16
PCI: Using configuration type 1
mtrr: v2.0 (20020519)
ACPI: Subsystem revision 20031002
 tbxface-0117 [03] acpi_load_tables      : ACPI Tables successfully acquired
Parsing all Control Methods:............................................................................................................................................................................................................................................................................................................................................
Table [DSDT](id F004) - 1064 Objects with 55 Devices 332 Methods 29 Regions
ACPI Namespace successfully loaded at root c04656dc
ACPI: IRQ 9 was Edge Triggered, setting to Level Triggerd
evxfevnt-0093 [04] acpi_enable           : Transition to ACPI mode successful
evgpeblk-0748 [06] ev_create_gpe_block   : GPE 00 to 31 [_GPE] 4 regs at 000000000000E428 on int 9
Completing Region/Field/Buffer/Package initialization:....................................................................................................................................
Initialized 29/29 Regions 30/30 Fields 42/42 Buffers 31/31 Packages (1072 nodes)
Executing all Device _STA and_INI methods:........................................................
56 Devices found containing: 56 _STA, 5 _INI methods
ACPI: Interpreter enabled
ACPI: Using PIC for interrupt routing
ACPI: PCI Root Bridge [PCI0] (00:00)
PCI: Probing PCI hardware (bus 00)
PCI: Ignoring BAR0-3 of IDE controller 0000:00:1f.1
Transparent bridge - 0000:00:1e.0
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT]
ACPI: Embedded Controller [EC0] (gpe 28)
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 *11 12)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 11 12)
ACPI: PCI Interrupt Link [LNKC] (IRQs *4 12)
ACPI: PCI Interrupt Link [LNKD] (IRQs *5 6)
ACPI: PCI Interrupt Link [LNKE] (IRQs 6 *11)
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 7)
ACPI: PCI Interrupt Link [LNKG] (IRQs 4 7)
ACPI: PCI Interrupt Link [LNKH] (IRQs *4 6 12)
ACPI: Power Resource [GFAN] (off)
Linux Plug and Play Support v0.97 (c) Adam Belay
PnPBIOS: Scanning system for PnP BIOS support...
PnPBIOS: Found PnP BIOS installation structure at 0xc00f2e00
PnPBIOS: PnP BIOS version 1.0, entry 0xf0000:0x39da, dseg 0xf0000
PnPBIOS: Unknown tag '0x0', length '1'.
PnPBIOS: Unknown tag '0x8', length '7'.
PnPBIOS: Unknown tag '0x8', length '7'.
PnPBIOS: Resource structure does not contain an end tag.
PnPBIOS: 14 nodes reported by PnP BIOS; 14 recorded by driver
SCSI subsystem initialized
Linux Kernel Card Services
  options:  [pci] [pm]
drivers/usb/core/usb.c: registered new driver usbfs
drivers/usb/core/usb.c: registered new driver hub
ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 11
ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 5
ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 4
ACPI: PCI Interrupt Link [LNKH] enabled at IRQ 4
ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 5
ACPI: PCI Interrupt Link [LNKE] enabled at IRQ 11
PCI: Using ACPI for IRQ routing
PCI: if you experience problems, try using option 'pci=noacpi' or even 'acpi=off'
vga16fb: initializing
vga16fb: mapped to 0xc00a0000
fb0: VGA16 VGA frame buffer device
speedstep-centrino: found "Intel(R) Pentium(R) M processor 1300MHz": max frequency: 1300000kHz
ikconfig 0.7 with /proc/config*
devfs: v1.22 (20021013) Richard Gooch (rgooch-r1x6VkxMR+00zabcByZE4g@public.gmane.org)
devfs: devfs_debug: 0x0
devfs: boot_options: 0x1
Installing knfsd (copyright (C) 1996 okir-pn4DOG8n3UYbFoVRYvo4fw@public.gmane.org).
NTFS driver 2.1.4 [Flags: R/O].
udf: registering filesystem
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
isapnp: Scanning for PnP cards...
isapnp: No Plug & Play device found
pty: 256 Unix98 ptys configured
request_module: failed /sbin/modprobe -- parport_lowlevel. error = -16
lp: driver loaded but no devices found
Real Time Clock Driver v1.12
Serial: 8250/16550 driver $Revision: 1.90 $ 8 ports, IRQ sharing disabled
ttyS1 at I/O 0x2f8 (irq = 3) is a NS16550A
parport0: PC-style at 0x378 (0x778) [PCSPP(,...)]
parport0: irq 7 detected
lp0: using parport0 (polling).
Using anticipatory io scheduler
floppy0: no floppy controllers found
RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize
loop: loaded (max 8 devices)
nbd: registered device at major 43
eepro100.c:v1.09j-t 9/29/99 Donald Becker http://www.scyld.com/network/eepro100.html
eepro100.c: $Revision: 1.36 $ 2000/11/17 Modified by Andrey V. Savochkin <saw-5bpFXmC1L3aJ4eUNlOKu3Q@public.gmane.org> and others
eth0: 0000:01:08.0, 00:0C:6E:21:D1:F9, IRQ 11.
  Board assembly 000000-000, Physical connectors present: RJ45
  Primary interface chip i82555 PHY #1.
  General self-test: passed.
  Serial sub-system self-test: passed.
  Internal registers self-test: passed.
  ROM checksum self-test: passed (0x04f4518b).
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
ICH4: IDE controller at PCI slot 0000:00:1f.1
PCI: Enabling device 0000:00:1f.1 (0005 -> 0007)
ICH4: chipset revision 3
ICH4: not 100% native mode: will probe irqs later
    ide0: BM-DMA at 0xffa0-0xffa7, BIOS settings: hda:DMA, hdb:pio
    ide1: BM-DMA at 0xffa8-0xffaf, BIOS settings: hdc:DMA, hdd:pio
hda: IC25N040ATCS04-0, ATA DISK drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
hdc: QSI CD-RW/DVD-ROM SBW-242, ATAPI CD/DVD-ROM drive
ide1 at 0x170-0x177,0x376 on irq 15
hda: max request size: 128KiB
hda: 78140160 sectors (40007 MB) w/1768KiB Cache, CHS=65535/16/63, UDMA(100)
 /dev/ide/host0/bus0/target0/lun0: p1 p2 p3 < p5 p6 > p4
hdc: ATAPI 12X DVD-ROM CD-R/RW drive, 2048kB Cache, UDMA(33)
Uniform CD-ROM driver Revision: 3.12
scsi0 : scsi_debug, Version: 1.70 (20030507), num_tgts=1, dev_size_mb=8, opts=0x0
  Vendor: Linux     Model: scsi_debug        Rev: 0004
  Type:   Direct-Access                      ANSI SCSI revision: 03
SCSI device sda: 16384 512-byte hdwr sectors (8 MB)
SCSI device sda: drive cache: write back
 /dev/scsi/host0/bus0/target0/lun0: unknown partition table
Attached scsi disk sda at scsi0, channel 0, id 0, lun 0
Attached scsi generic sg0 at scsi0, channel 0, id 0, lun 0,  type 0
mice: PS/2 mouse device common for all mice
i8042.c: Detected active multiplexing controller, rev 1.1.
serio: i8042 AUX0 port at 0x60,0x64 irq 12
serio: i8042 AUX1 port at 0x60,0x64 irq 12
serio: i8042 AUX2 port at 0x60,0x64 irq 12
Synaptics Touchpad, model: 1
 Firmware: 5.9
 180 degree mounted touchpad
 Sensor: 18
 new absolute packet format
 Touchpad has extended capability bits
 -> four buttons
 -> palm detection
input: SynPS/2 Synaptics TouchPad on isa0060/serio4
serio: i8042 AUX3 port at 0x60,0x64 irq 12
input: AT Translated Set 2 keyboard on isa0060/serio0
serio: i8042 KBD port at 0x60,0x64 irq 1
NET: Registered protocol family 2
IP: routing cache hash table of 4096 buckets, 32Kbytes
TCP: Hash tables configured (established 32768 bind 65536)
NET: Registered protocol family 1
NET: Registered protocol family 17
NET: Registered protocol family 5
ACPI: (supports S0 S1 S3 S4 S5)
kjournald starting.  Commit interval 5 seconds
EXT3-fs: mounted filesystem with ordered data mode.
VFS: Mounted root (ext3 filesystem) readonly.
Mounted devfs on /dev
Freeing unused kernel memory: 136k freed
Adding 265032k swap on /dev/hda6.  Priority:-1 extents:1
EXT3 FS on hda4, internal journal
ACPI: AC Adapter [AC0] (on-line)
ACPI: Battery Slot [BAT0] (battery present)
ACPI: Battery Slot [BAT1] (battery absent)
ACPI: Power Button (FF) [PWRF]
ACPI: Sleep Button (CM) [SLPB]
ACPI: Lid Switch [LID]
ACPI: Fan [FN00] (off)
ACPI: Processor [CPU1] (supports C1 C2 C3, 8 throttling states)
ACPI: Thermal Zone [THRM] (58 C)
Asus Laptop ACPI Extras version 0.26
  M3N model detected, supported
PCI: Enabling device 0000:00:1f.5 (0005 -> 0007)
PCI: Setting latency timer of device 0000:00:1f.5 to 64
intel8x0: clocking to 48000
     osl-0892 [5305] os_wait_semaphore     : Failed to acquire semaphore[df73ee00|1|0], AE_TIME
  utmisc-0745 [5304] ut_acquire_mutex      : Thread 0 could not acquire Mutex [ACPI_MTX_Execute] AE_TIME
 exutils-0094: *** Error: Could not acquire interpreter mutex
     osl-0892 [5297] os_wait_semaphore     : Failed to acquire semaphore[df73e5a0|1|0], AE_TIME
     osl-0892 [5301] os_wait_semaphore     : Failed to acquire semaphore[df73e5a0|1|0], AE_TIME
     osl-0892 [5310] os_wait_semaphore     : Failed to acquire semaphore[df73e5a0|1|0], AE_TIME
     osl-0892 [5319] os_wait_semaphore     : Failed to acquire semaphore[df73e5a0|1|0], AE_TIME
     osl-0892 [24009] os_wait_semaphore     : Failed to acquire semaphore[df73e5a0|1|0], AE_TIME
     osl-0892 [24016] os_wait_semaphore     : Failed to acquire semaphore[df73e5a0|1|0], AE_TIME
     osl-0892 [24025] os_wait_semaphore     : Failed to acquire semaphore[df73e5a0|1|0], AE_TIME
     osl-0892 [24034] os_wait_semaphore     : Failed to acquire semaphore[df73e5a0|1|0], AE_TIME
     osl-0892 [24043] os_wait_semaphore     : Failed to acquire semaphore[df73e5a0|1|0], AE_TIME
     osl-0892 [32362] os_wait_semaphore     : Failed to acquire semaphore[df73ee00|1|0], AE_TIME
  utmisc-0745 [32361] ut_acquire_mutex      : Thread 0 could not acquire Mutex [ACPI_MTX_Execute] AE_TIME
 exutils-0094: *** Error: Could not acquire interpreter mutex
     osl-0892 [32358] os_wait_semaphore     : Failed to acquire semaphore[df73e5a0|1|0], AE_TIME
     osl-0892 [32362] os_wait_semaphore     : Failed to acquire semaphore[df73e5a0|1|0], AE_TIME
     osl-0892 [32371] os_wait_semaphore     : Failed to acquire semaphore[df73e5a0|1|0], AE_TIME
     osl-0892 [32380] os_wait_semaphore     : Failed to acquire semaphore[df73e5a0|1|0], AE_TIME
     osl-0892 [32389] os_wait_semaphore     : Failed to acquire semaphore[df73e5a0|1|0], AE_TIME
     osl-0892 [32398] os_wait_semaphore     : Failed to acquire semaphore[df73e5a0|1|0], AE_TIME
     osl-0892 [32516] os_wait_semaphore     : Failed to acquire semaphore[df73e5a0|1|0], AE_TIME
     osl-0892 [38528] os_wait_semaphore     : Failed to acquire semaphore[df73e5a0|1|0], AE_TIME
     osl-0892 [43632] os_wait_semaphore     : Failed to acquire semaphore[df73ee00|1|0], AE_TIME
  utmisc-0745 [43631] ut_acquire_mutex      : Thread 0 could not acquire Mutex [ACPI_MTX_Execute] AE_TIME
 exutils-0094: *** Error: Could not acquire interpreter mutex
     osl-0892 [43627] os_wait_semaphore     : Failed to acquire semaphore[df73e5a0|1|0], AE_TIME
     osl-0892 [43631] os_wait_semaphore     : Failed to acquire semaphore[df73e5a0|1|0], AE_TIME
     osl-0892 [43640] os_wait_semaphore     : Failed to acquire semaphore[df73e5a0|1|0], AE_TIME
     osl-0892 [43649] os_wait_semaphore     : Failed to acquire semaphore[df73e5a0|1|0], AE_TIME

^ permalink raw reply	[flat|nested] 3+ messages in thread
end of thread, other threads:[~2003-11-27 14:26 UTC | newest]

Thread overview: 3+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2003-10-23 22:31 ASUS M3N (Centrino) & kernel 2.6.0-test8 Luca Capello
     [not found] ` <3F9856B8.3080103-wlebWZzHoyE@public.gmane.org>
2003-11-22 13:40   ` ASUS M3N (Centrino) Luca Capello
     [not found]     ` <3FBF6751.80507-wlebWZzHoyE@public.gmane.org>
2003-11-27 14:26       ` Luca Capello

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox