Marcelo Tosatti wrote:
> 
> On 23 Oct 2003, Len Brown wrote:
> 
> 
>>David,
>>best if you can file a bug and attach the info there --
>>i sifted through my e-mail but i'm not sure which
>>one this e-mail refers to.
>>
>>thanks,
>>-Len
>>
>>Please file a bug at http://bugzilla.kernel.org/
>>Category: Power Management
>>Component: ACPI
>>
>>Please attach the output from dmidecode, available in /usr/sbin/, or
>>here:
>>http://www.nongnu.org/dmidecode/
>>
>>Please attach the output from acpidmp, available in /usr/sbin/, or in
>>here
>>http://www.intel.com/technology/iapc/acpi/downloads/pmtools-20010730.tar.gz
>>
>>Please attach /proc/interrupts and the dmesg output showing the failure,
>>if possible.
> 
> 
> David already did it... its bug number 1283.
> 
> It seems the problem is caused by sharing USB interrupt with ACPI 
> interrupt.
> 
> However, it seems the correct thing to use is IRQ20 for the USB
> controller, not IRQ9, yes? 
> 
> David, what /proc/interrupts looks like in 2.6?

Attached config, boot messages, and interrupts for 2.6.0-test8-bk2.
The boot messages do not have any USB debug, but do have ACPI debug. 
Also, all of my USB ports work 100% of the time on 2.6 with ACPI enabled.

-David van Hoose