Inspecting /boot/System.map-2.4.20-4GB Loaded 20964 symbols from /boot/System.map-2.4.20-4GB. Symbols match kernel version 2.4.20. Loaded 89 symbols from 7 modules. klogd 1.4.1, log source = ksyslog started. <4>Linux version 2.4.20-4GB (root-MOF6036VFP+XcDkGTvBoYw@public.gmane.org) (gcc version 3.3 20030226 (prerelease) (SuSE Linux)) #1 Wed Aug 6 18:26:21 UTC 2003 <6>BIOS-provided physical RAM map: <4> BIOS-e820: 0000000000000000 - 000000000009f800 (usable) <4> BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved) <4> BIOS-e820: 00000000000d8000 - 0000000000100000 (reserved) <4> BIOS-e820: 0000000000100000 - 000000004767e000 (usable) <4> BIOS-e820: 000000004767e000 - 00000000476e0000 (ACPI NVS) <4> BIOS-e820: 00000000476e0000 - 00000000476ec000 (ACPI data) <4> BIOS-e820: 00000000476ec000 - 0000000047700000 (ACPI NVS) <4> BIOS-e820: 0000000047700000 - 0000000048000000 (reserved) <4> BIOS-e820: 00000000fec10000 - 00000000fec20000 (reserved) <4> BIOS-e820: 00000000ff800000 - 00000000ffc00000 (reserved) <4> BIOS-e820: 00000000fffffc00 - 0000000100000000 (reserved) <4>Scanning bios EBDA for MXT signature <5>246MB HIGHMEM available. <5>896MB LOWMEM available. <7>ACPI: have wakeup address 0xc0001000 <4>On node 0 totalpages: 292478 <4>zone(0): 4096 pages. <4>zone(1): 225280 pages. <4>zone(2): 63102 pages. <4>Dell Inspiron with broken BIOS detected. Refusing to enable the local APIC. <6>ACPI: RSDP (v000 DELL ) @ 0x000f60e0 <6>ACPI: RSDT (v001 DELL Montara 01540.00000) @ 0x476e5dea <6>ACPI: FADT (v001 DELL MONTARA 01540.00000) @ 0x476ebed2 <6>ACPI: BOOT (v001 DELL $SBFTBL$ 01540.00000) @ 0x476ebfd8 <6>ACPI: SSDT (v001 DELL MONTARA 01540.00000) @ 0x476e5e1a <6>ACPI: DSDT (v001 INTEL MONTARAG 01540.00000) @ 0x00000000 <5>ACPI: BIOS passes blacklist <4>Building zonelist for node : 0 <4>Kernel command line: root=/dev/hda8 vga=0x314 splash=silent splash=silent acpi=force <6>bootsplash: silent mode. <6>bootsplash: silent mode. <6>Initializing CPU#0 <4>Detected 1199.001 MHz processor. <4>Console: colour dummy device 80x25 <4>Calibrating delay loop... 2392.06 BogoMIPS <6>Memory: 1152424k/1169912k available (1571k kernel code, 17100k reserved, 574k data, 160k init, 252408k highmem) <6>Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes) <6>Inode cache hash table entries: 131072 (order: 8, 1048576 bytes) <6>Mount cache hash table entries: 512 (order: 0, 4096 bytes) <4>Buffer-cache hash table entries: 131072 (order: 7, 524288 bytes) <4>Page-cache hash table entries: 524288 (order: 9, 2097152 bytes) <6>Intel machine check architecture supported. <6>Intel machine check reporting enabled on CPU#0. <7>CPU: After generic, caps: a7e9f9bf 00000000 00000000 00000000 <7>CPU: Common caps: a7e9f9bf 00000000 00000000 00000000 <4>CPU: Intel(R) Pentium(R) M processor 1200MHz stepping 05 <6>Enabling fast FPU save and restore... done. <6>Enabling unmasked SIMD FPU exception support... done. <6>Checking 'hlt' instruction... OK. <4>POSIX conformance testing by UNIFIX <4>mtrr: v1.40 (20010327) Richard Gooch (rgooch-r1x6VkxMR+00zabcByZE4g@public.gmane.org) <4>mtrr: detected mtrr type: Intel <6>ACPI: Subsystem revision 20030228 <6>PCI: PCI BIOS revision 2.10 entry at 0xfd9b0, last bus=2 <6>PCI: Using configuration type 1 <6>ACPI: Interpreter enabled <6>ACPI: Using PIC for interrupt routing <6>ACPI: System [ACPI] (supports S0 S3 S4 S5) <4> ACPI-1121: *** Error: Method execution failed [\_SB_.ADP1._STA] (Node f7f6f200), AE_AML_NO_RETURN_VALUE <4> ACPI-1121: *** Error: Method execution failed [\_SB_.BAT1._STA] (Node f7f6f300), AE_AML_NO_RETURN_VALUE <4> ACPI-1121: *** Error: Method execution failed [\_SB_.BAT2._STA] (Node f7f6f420), AE_AML_NO_RETURN_VALUE <6>ACPI: PCI Root Bridge [PCI0] (00:00) <4>PCI: Probing PCI hardware (bus 00) <6>PCI: Ignoring BAR0-3 of IDE controller 00:1f.1 <4>Transparent bridge - Intel Corp. 82801BAM/CAM PCI Bridge <7>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] <7>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIB._PRT] <4>ACPI: PCI Interrupt Link [LNKA] (IRQs *10) <4>ACPI: PCI Interrupt Link [LNKB] (IRQs *10) <4>ACPI: PCI Interrupt Link [LNKC] (IRQs *11) <4>ACPI: PCI Interrupt Link [LNKD] (IRQs *11) <4>ACPI: PCI Interrupt Link [LNKE] (IRQs *5) <4>ACPI: PCI Interrupt Link [LNKF] (IRQs 5, disabled) <4>ACPI: PCI Interrupt Link [LNKG] (IRQs 10, disabled) <4>ACPI: PCI Interrupt Link [LNKH] (IRQs *10) <6>ACPI: Embedded Controller [H_EC] (gpe 28) <4> ACPI-0341: *** Error: Handler for [EmbeddedControl] returned AE_BAD_PARAMETER <4> ACPI-1121: *** Error: Method execution failed [\_SB_.PCI0.LPCB.H_EC._REG] (Node f7f6ba20), AE_BAD_PARAMETER <6>ACPI: Power Resource [PFAN] (on) <6>PCI: Probing PCI hardware <4>ACPI: PCI Interrupt Link [LNKF] enabled at IRQ 5 <4>ACPI: PCI Interrupt Link [LNKG] enabled at IRQ 10 <6>PCI: Using ACPI for IRQ routing <6>PCI: if you experience problems, try using option 'pci=noacpi' or even 'acpi=off' <6>Linux NET4.0 for Linux 2.4 <6>Based upon Swansea University Computer Society NET3.039 <4>Initializing RT netlink socket <6>apm: BIOS not found. <4>mxt_scan_bios: enter <4>Starting kswapd <4>bigpage subsystem: allocated 0 bigpages (=0MB). <4>allocated 32 pages and 32 bhs reserved for the highmem bounces <4>kinoded started <5>VFS: Disk quotas vdquot_6.5.1 <5>aio_setup: num_physpages = 73119 <5>aio_setup: sizeof(struct page) = 48 <6>vesafb: framebuffer at 0xe8000000, mapped to 0xf881d000, size 8000k <6>vesafb: mode is 800x600x16, linelength=1600, pages=7 <6>vesafb: protected mode interface info at a5f3:1f5f <6>vesafb: scrolling: redraw <6>vesafb: directcolor: size=0:5:6:5, shift=0:11:5:0 <6>Looking for splash picture.... silenjpeg size 21568 bytes, found (800x600, 16440 bytes, v3). <6>Got silent jpeg. <6>Got silent jpeg. <4>Console: switching to colour frame buffer device 92x29 <6>fb0: VESA VGA frame buffer device <4>pty: 256 Unix98 ptys configured <6>Serial driver version 5.05c (2001-07-08) with HUB-6 MANY_PORTS MULTIPORT SHARE_IRQ SERIAL_PCI enabled <6>ttyS01 at 0x02f8 (irq = 3) is a 16550A <6>Real Time Clock Driver v1.10e <4>floppy0: no floppy controllers found <4>RAMDISK driver initialized: 16 RAM disks of 64000K size 1024 blocksize <6>loop: loaded (max 16 devices) <6>Uniform Multi-Platform E-IDE driver Revision: 7.00beta-2.4 <6>ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx <6>C-ICH: IDE controller at PCI slot 00:1f.1 <4>PCI: Enabling device 00:1f.1 (0005 -> 0007) <6>C-ICH: chipset revision 1 <6>C-ICH: not 100%% native mode: will probe irqs later <6> ide0: BM-DMA at 0x1810-0x1817, BIOS settings: hda:DMA, hdb:pio <4>hda: HITACHI_DK23FB-60, ATA DISK drive <4>blk: queue c03ac500, I/O limit 4095Mb (mask 0xffffffff) <4>ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 <4>hda: attached ide-disk driver. <4>hda: host protected area => 1 <6>hda: 117210240 sectors (60012 MB) w/8192KiB Cache, CHS=7296/255/63, UDMA(100) <4>ide-floppy driver 0.99.newide <6>Partition check: <6> hda: hda1 hda2 < hda5 hda6 hda7 hda8 hda9 > <4>ide-floppy driver 0.99.newide <6>SCSI subsystem driver Revision: 1.00 <3>kmod: failed to exec /sbin/modprobe -s -k scsi_hostadapter, errno = 2 <6>md: md driver 0.90.0 MAX_MD_DEVS=256, MD_SB_DISKS=27 <6>md: Autodetecting RAID arrays. <6>md: autorun ... <6>md: ... autorun DONE. <6>NET4: Linux TCP/IP 1.0 for NET4.0 <6>IP Protocols: ICMP, UDP, TCP, IGMP <6>IP: routing cache hash table of 16384 buckets, 128Kbytes <6>TCP: Hash tables configured (established 524288 bind 65536) <6>Linux IP multicast router 0.06 plus PIM-SM <6>NET4: Unix domain sockets 1.0/SMP for Linux NET4.0. <5>RAMDISK: Compressed image found at block 0 <6>Freeing initrd memory: 458k freed <4>VFS: Mounted root (ext2 filesystem). <4>reiserfs: found format "3.6" with standard journal <4>reiserfs: enabling write barrier flush mode <4>reiserfs: using ordered data mode <4>reiserfs: checking transaction log (ide0(3,8)) for (ide0(3,8)) <4>Using r5 hash to sort names <4>VFS: Mounted root (reiserfs filesystem) readonly. <5>Trying to move old root to /initrd ... failed <5>Unmounting old root <5>Trying to free ramdisk memory ... okay <6>Freeing unused kernel memory: 160k freed <6>md: Autodetecting RAID arrays. <6>md: autorun ... <6>md: ... autorun DONE. <6>LVM version 1.0.5+(mp-v6a)(22/07/2002) module loaded <6>Adding Swap: 1261060k swap-space (priority 42) <6>Adding Swap: 1261060k swap-space (priority 42) <4>reiserfs: found format "3.6" with standard journal <4>reiserfs: enabling write barrier flush mode <4>reiserfs: using ordered data mode <4>reiserfs: checking transaction log (ide0(3,9)) for (ide0(3,9)) <4>Using r5 hash to sort names <6>NTFS driver 2.1.1a [Flags: R/O MODULE]. <6>NTFS volume version 3.1. <4>MSDOS FS: IO charset iso8859-1 Kernel logging (ksyslog) stopped. Kernel log daemon terminating. Boot logging started on /dev/tty1(/dev/console) at Fri Oct 24 12:12:37 2003 Configuring serial ports... ttyS1 at 0x02f8 (irq = 3) is a 16550A modprobe: modprobe: Can't locate module char-major-212 Configured serial ports doneRun file system check on root for LVM activation doneRemounting root file system (/) read/write for vgscan... Scanning for LVM volume groups... vgscan -- reading all physical volumes (this may take a while...) vgscan -- "/etc/lvmtab" and "/etc/lvmtab.d" successfully created vgscan -- WARNING: This program does not do a VGDA backup of your volume group Activating LVM volume groups... vgchange -- no volume groups found done Activating swap-devices in /etc/fstab... doneChecking file systems... fsck 1.28 (31-Aug-2002) Reiserfs super block in block 16 on 0x308 of format 3.6 with standard journal Blocks (total/free): 1311297/751934 by 4096 bytes Filesystem is clean Reiserfs super block in block 16 on 0x309 of format 3.6 with standard journal Blocks (total/free): 10149055/7466308 by 4096 bytes Filesystem is clean doneMounting local file systems... proc on /proc type proc (rw) devpts on /dev/pts type devpts (rw,mode=0620,gid=5) /dev/hda9 on /home type reiserfs (rw) /dev/hda1 on /windows/C type ntfs (ro,noexec,nosuid,nodev,gid=100,umask=0002,nls=iso8859-1) /dev/hda5 on /windows/D type vfat (rw,noexec,nosuid,nodev,gid=100,umask=0002,iocharset=iso8859-1,code=437) doneLoading required kernel modules doneRestore device permissions done Activating remaining swap-devices in /etc/fstab... doneMounting shared memory FS on /dev/shm done Setting up the CMOS clock done Setting up timezone data done Setting up hostname 'mirimon' done Setting up loopback interface done Enabling syn flood protection done Disabling IP forwarding done Creating /var/log/boot.msg donekillproc: kill(29,29) Running /etc/init.d/boot.local done Boot logging started on /dev/tty1(/dev/console) at Fri Oct 24 19:12:48 2003 Master Resource Control: previous runlevel: N, switching to runlevel: 5 Initializing random number generator done Setting up network interfaces: lo killproc: kill(29,3) INIT: Entering runlevel: 5 /etc/init.d/rc5.d/S01isdn start '/etc/init.d/rc5.d/S01isdn start' exits with status 0 /etc/init.d/rc5.d/S01random start '/etc/init.d/rc5.d/S01random start' exits with status 0 /etc/init.d/rc5.d/S05network start done eth0 failed eth1 failed '/etc/init.d/rc5.d/S05network start' exits with status 0 /etc/init.d/rc5.d/S06syslog start Starting syslog servicesstartproc: execve (/sbin/syslogd) [ /sbin/syslogd ], [ CONSOLE=/dev/console TERM=linux SHELL=/bin/sh progress=20 INIT_VERSION=sysvinit-2.82 REDIRECT=/dev/tty1 COLUMNS=92 PATH=/usr/local/sbin:/sbin:/bin:/usr/sbin:/usr/bin vga=0x314 RUNLEVEL=5 PWD=/ PREVLEVEL=N LINES=29 HOME=/ SHLVL=2 splash=silent sscripts=38 _=/sbin/startproc DAEMON=/sbin/syslogd ] startproc: execve (/sbin/klogd) [ /sbin/klogd -c 1 -2 ], [ CONSOLE=/dev/console TERM=linux SHELL=/bin/sh progress=20 INIT_VERSION=sysvinit-2.82 REDIRECT=/dev/tty1 COLUMNS=92 PATH=/usr/local/sbin:/sbin:/bin:/usr/sbin:/usr/bin vga=0x314 RUNLEVEL=5 PWD=/ PREVLEVEL=N LINES=29 HOME=/ SHLVL=2 splash=silent sscripts=38 _=/sbin/startproc DAEMON=/sbin/klogd ] done Starting hotplugging services ['/etc/init.d/rc5.d/S06syslog start' exits with status 0 /etc/init.d/rc5.d/S07hotplug start ieee1394 net pci usb .. ] done '/etc/init.d/rc5.d/S07hotplug start' exits with status 0 /etc/init.d/rc5.d/S08pcmcia start Starting kernel PCMCIA startproc: execve (/sbin/cardmgr) [ /sbin/cardmgr -m /lib/modules/2.4.20-4GB/ -n pcmcia ], [ CONSOLE=/dev/console TERM=linux SHELL=/bin/sh progress=22 INIT_VERSION=sysvinit-2.82 REDIRECT=/dev/tty1 COLUMNS=92 PATH=/usr/local/sbin:/sbin:/bin:/usr/sbin:/usr/bin vga=0x314 RUNLEVEL=5 PWD=/ PREVLEVEL=N LINES=29 HOME=/ SHLVL=2 splash=silent sscripts=38 _=/sbin/startproc DAEMON=/sbin/cardmgr ] done '/etc/init.d/rc5.d/S08pcmcia start' exits with status 0 /etc/init.d/rc5.d/S08resmgr start Starting resource managerstartproc: execve (/sbin/resmgrd) [ /sbin/resmgrd ], [ CONSOLE=/dev/console TERM=linux SHELL=/bin/sh progress=23 INIT_VERSION=sysvinit-2.82 REDIRECT=/dev/tty1 COLUMNS=92 PATH=/usr/local/sbin:/sbin:/bin:/usr/sbin:/usr/bin vga=0x314 RUNLEVEL=5 PWD=/ PREVLEVEL=N LINES=29 HOME=/ SHLVL=2 splash=silent sscripts=38 _=/sbin/startproc DAEMON=/sbin/resmgrd ] done '/etc/init.d/rc5.d/S08resmgr start' exits with status 0 Starting RPC portmap daemon/etc/init.d/rc5.d/S10portmap start startproc: execve (/sbin/portmap) [ /sbin/portmap ], [ CONSOLE=/dev/console TERM=linux SHELL=/bin/sh progress=24 INIT_VERSION=sysvinit-2.82 REDIRECT=/dev/tty1 COLUMNS=92 PATH=/usr/local/sbin:/sbin:/bin:/usr/sbin:/usr/bin vga=0x314 RUNLEVEL=5 PWD=/ PREVLEVEL=N LINES=29 HOME=/ SHLVL=2 splash=silent sscripts=38 _=/sbin/startproc DAEMON=/sbin/portmap ] done '/etc/init.d/rc5.d/S10portmap start' exits with status 0 /etc/init.d/rc5.d/S10splash_early start '/etc/init.d/rc5.d/S10splash_early start' exits with status 0 /etc/init.d/rc5.d/S14acpid start Loading ACPI modules (ac fan processor battery thermal button ) done Starting acpid done startproc: execve (/usr/sbin/acpid) [ /usr/sbin/acpid ], [ CONSOLE=/dev/console TERM=linux SHELL=/bin/sh progress=26 INIT_VERSION=sysvinit-2.82 REDIRECT=/dev/tty1 COLUMNS=92 PATH=/usr/local/sbin:/sbin:/bin:/usr/sbin:/usr/bin vga=0x314 RUNLEVEL=5 PWD=/ PREVLEVEL=N LINES=29 HOME=/ SHLVL=2 splash=silent sscripts=38 _=/sbin/startproc DAEMON=/usr/sbin/acpid ] '/etc/init.d/rc5.d/S14acpid start' exits with status 0 /etc/init.d/rc5.d/S14alsasound start Starting sound driver: intel8x0 done Restoring the previous sound setting done '/etc/init.d/rc5.d/S14alsasound start' exits with status 0 /etc/init.d/rc5.d/S14fbset start '/etc/init.d/rc5.d/S14fbset start' exits with status 0 /etc/init.d/rc5.d/S14rpmconfigcheck start '/etc/init.d/rc5.d/S14rpmconfigcheck start' exits with status 0 /etc/init.d/rc5.d/S14sshd start Starting SSH daemonstartproc: execve (/usr/sbin/sshd) [ /usr/sbin/sshd -o PidFile=/var/run/sshd.init.pid ], [ CONSOLE=/dev/console TERM=linux SHELL=/bin/sh progress=30 INIT_VERSION=sysvinit-2.82 REDIRECT=/dev/tty1 COLUMNS=92 PATH=/usr/local/sbin:/sbin:/bin:/usr/sbin:/usr/bin vga=0x314 RUNLEVEL=5 PWD=/ PREVLEVEL=N LINES=29 HOME=/ SHLVL=2 splash=silent sscripts=38 _=/sbin/startproc DAEMON=/usr/sbin/sshd ] done '/etc/init.d/rc5.d/S14sshd start' exits with status 0 /etc/init.d/rc5.d/S15kbd start Loading keymap qwerty/us.map.gz doneLoading compose table winkeys shiftctrl latin1.add done Loading console font lat1-16.psfu doneLoading screenmap none doneSetting up console ttys done'/etc/init.d/rc5.d/S15kbd start' exits with status 0 /etc/init.d/rc5.d/S15postfix start Starting mail service (Postfix) done Starting service at daemon'/etc/init.d/rc5.d/S15postfix start' exits with status 0 /etc/init.d/rc5.d/S15splash start '/etc/init.d/rc5.d/S15splash start' exits with status 0 /etc/init.d/rc5.d/S16atd start done startproc: execve (/usr/sbin/atd) [ /usr/sbin/atd ], [ CONSOLE=/dev/console TERM=linux SHELL=/bin/sh progress=34 INIT_VERSION=sysvinit-2.82 REDIRECT=/dev/tty1 COLUMNS=92 PATH=/usr/local/sbin:/sbin:/bin:/usr/sbin:/usr/bin vga=0x314 RUNLEVEL=5 PWD=/ PREVLEVEL=N LINES=29 HOME=/ SHLVL=2 splash=silent sscripts=38 _=/sbin/startproc DAEMON=/usr/sbin/atd ] '/etc/init.d/rc5.d/S16atd start' exits with status 0 /etc/init.d/rc5.d/S16cron start Starting CRON daemonstartproc: execve (/usr/sbin/cron) [ /usr/sbin/cron ], [ CONSOLE=/dev/console TERM=linux SHELL=/bin/sh progress=35 INIT_VERSION=sysvinit-2.82 REDIRECT=/dev/tty1 COLUMNS=92 PATH=/usr/local/sbin:/sbin:/bin:/usr/sbin:/usr/bin vga=0x314 RUNLEVEL=5 PWD=/ PREVLEVEL=N LINES=29 HOME=/ SHLVL=2 splash=silent sscripts=38 _=/sbin/startproc DAEMON=/usr/sbin/cron ] done Starting hardware scan on boot'/etc/init.d/rc5.d/S16cron start' exits with status 0 /etc/init.d/rc5.d/S16hwscan start '/etc/init.d/rc5.d/S16hwscan start' exits with status 0 Starting Name Service Cache Daemon/etc/init.d/rc5.d/S16nscd start startproc: execve (/usr/sbin/nscd) [ /usr/sbin/nscd ], [ CONSOLE=/dev/console TERM=linux SHELL=/bin/sh progress=37 INIT_VERSION=sysvinit-2.82 REDIRECT=/dev/tty1 COLUMNS=92 PATH=/usr/local/sbin:/sbin:/bin:/usr/sbin:/usr/bin vga=0x314 RUNLEVEL=5 PWD=/ PREVLEVEL=N LINES=29 HOME=/ SHLVL=2 splash=silent sscripts=38 _=/sbin/startproc DAEMON=/usr/sbin/nscd ] done '/etc/init.d/rc5.d/S16nscd start' exits with status 0 /etc/init.d/rc5.d/S17splash_late start '/etc/init.d/rc5.d/S17splash_late start' exits with status 0 /etc/init.d/rc5.d/S17xdm start Starting service kdmstartproc: execve (/opt/kde3/bin/kdm) [ /opt/kde3/bin/kdm ], [ LC_MONETARY= CONSOLE=/dev/console TERM=linux SHELL=/bin/sh LC_NUMERIC= QTDIR=/usr/lib/qt3 LC_ALL= progress=39 INIT_VERSION=sysvinit-2.82 KDEROOTHOME=/root/.kdm REDIRECT=/dev/tty1 COLUMNS=92 PATH=/usr/local/sbin:/sbin:/bin:/usr/sbin:/usr/bin LC_MESSAGES= vga=0x314 RUNLEVEL=5 LC_COLLATE=POSIX PWD=/ LANG=en_US PREVLEVEL=N LINES=29 HOME=/ SHLVL=2 no_proxy=localhost RC_LC_COLLATE=POSIX WINDOWMANAGER=/usr/bin/X11/kde PRINTER=lp RC_LANG=en_US LC_CTYPE=en_US splash=silent sscripts=38 LC_TIME= _=/sbin/startproc DAEMON=/opt/kde3/bin/kdm ] done Master Resource Control: runlevel 5 has been reached '/etc/init.d/rc5.d/S17xdm start' exits with status 0 killproc: kill(572,3)