RE: acpi and 2.6.0 kernel - S3 doesn't resume, S4 =infinite loop

RE: acpi and 2.6.0 kernel - S3 doesn't resume, S4 =infinite loop

[Yu, Luming]

>I have just done exactly the same - just on a Mandrake 9.1 box
>I tried this on an ASUS M2400N laptop also with the i855 chipset
>The results were the same - only a hard reebot boot was working.

What could cause S3 resume failure?  My  T21 works well with S3, S1.
Could you please narrow down the issue ! 
--Luming


-------------------------------------------------------
This SF.net email is sponsored by: IBM Linux Tutorials.
Become an expert in LINUX or just sharpen your skills.  Sign up for IBM's
Free Linux Tutorials.  Learn everything from the bash shell to sys admin.
Click now! http://ads.osdn.com/?ad_id\x1278&alloc_id371&op=click

Re: acpi and 2.6.0 kernel - S3 doesn't resume, S4 =infinite loop

[Nirmal Govind]

> What could cause S3 resume failure?  My  T21 works well with S3, S1.
> Could you please narrow down the issue ! 
> --Luming

After several google searches and reading up on posts by others abt
similar problems with ACPI,  I was leaning towards the theory that it's
got something to do with the Intel 855 graphics adapter on both my
Fujitsu and Mads's ASUS. I read on another post that the graphics
card had issues with ACPI (that one wasn't Intel 855)..

But after looking at the syslog, this doesn't seem to be the 
problem: there was a message that said it was
looking for "Module char-major-10-134" (the APM module) when it 
resumed -- I put in an
alias to set this to off and that error went away. I also removed
all the modules before I suspended and that reduced the number of
errors I get when it resumes. But these are the remaining messages
from syslog:

Dec 23 02:22:13 variance kernel: Back to C!
Dec 23 02:22:13 variance kernel: acpi_processor_perf-0318 [37]
acpi_processor_set_per: Transition failed
Dec 23 02:22:13 variance kernel: cpufreq: resume failed in
->setpolicy/target step on CPU 0
Dec 23 02:22:13 variance kernel: PM: Finishing up.
Dec 23 02:22:13 variance kernel: PCI: Setting latency timer of
device 0000:00:1d.0 to 64
Dec 23 02:22:13 variance kernel: PCI: Setting latency timer of
device 0000:00:1d.1 to 64
Dec 23 02:22:13 variance kernel: PCI: Setting latency timer of
device 0000:00:1d.2 to 64
Dec 23 02:22:13 variance kernel: MCE: The hardware reports a non
fatal, correctable incident occurred on CPU 0.
Dec 23 02:22:13 variance kernel: Bank 1: e2000000000001d5
Dec 23 02:22:13 variance kernel: hda: Wakeup request inited, waiting
for !BSY...
Dec 23 02:22:13 variance kernel: hda: start_power_step(step: 1000)
Dec 23 02:22:13 variance kernel: blk: queue cf4fe000, I/O limit
4095Mb (mask 0xffffffff)
Dec 23 02:22:13 variance kernel: hda: completing PM request, resume
Dec 23 02:22:13 variance kernel: hdc: Wakeup request inited, waiting
for !BSY...
Dec 23 02:22:13 variance kernel: hdc: start_power_step(step: 1000)
Dec 23 02:22:13 variance kernel: hdc: completing PM request, resume
Dec 23 02:22:13 variance kernel: Restarting tasks... done
Dec 23 02:22:13 variance kernel: drivers/usb/host/uhci-hcd.c: 1820:
host system error, PCI problems?
Dec 23 02:22:13 variance kernel: drivers/usb/host/uhci-hcd.c: 1820:
host controller halted. very bad
Dec 23 02:22:13 variance kernel: drivers/usb/host/uhci-hcd.c: 1840:
host system error, PCI problems?
Dec 23 02:22:13 variance kernel: drivers/usb/host/uhci-hcd.c: 1840:
host controller halted. very bad
Dec 23 02:22:13 variance kernel: drivers/usb/host/uhci-hcd.c: 1860:
host system error, PCI problems?
Dec 23 02:22:13 variance kernel: drivers/usb/host/uhci-hcd.c: 1860:
host controller halted. very bad

So looks like there's some problem with the uhci-hcd controller? I 
googled and it's a recognized bug:

http://bugzilla.kernel.org/show_bug.cgi?id=1373

The workaround suggested is to rmmod the uhci-hcd module .. I have 
it built into the kernel so maybe I need to recompile this as a 
module... However, the others have been able to resume, just that 
the USB devices don't work.. mine doesn't resume at all.. could this 
have to do with the following error above:

cpufreq: resume failed in ->setpolicy/target step on CPU 0

Should I uncheck the CONFIG_X86_ACPI_CPUFREQ=y option in the kernel 
config?

Btw, the thermal_zone directory in /proc/acpi is empty.. I did 
enable it in
the kernel configure .. the same goes for fan/ - it's also empty. Do
these work for you?

nirmal




-------------------------------------------------------
This SF.net email is sponsored by: IBM Linux Tutorials.
Become an expert in LINUX or just sharpen your skills.  Sign up for IBM's
Free Linux Tutorials.  Learn everything from the bash shell to sys admin.
Click now! http://ads.osdn.com/?ad_id=1278&alloc_id=3371&op=click

acpi and 2.6.0 kernel - S3 doesn't resume, S4 = infinite loop

[Nirmal Govind]

Hi.. I just compiled the 2.6.0 kernel that was released on Dec. 
18th... I have ACPI support with all the options enabled. I tried 
suspending with S3 and it suspends fine (my power indicator starts 
flashing which means that it has suspended). But when I hit the 
power button, it does not resume properly, it tries to resume, the 
power indicator stops flashing which means that it thinks it's woken 
up, but all I see is a blank screen and hitting any of the keys 
doesn't seem to do anything. Only thing that works is a hard reboot. 
I'm running Mandrake 9.2 on a Fujitsu Lifebook S series (6120D) with 
an Intel 855 chipset graphics adapter. Please let me know if there's 
a way to get S3 to work well.

Also, I tried suspend with S4 and that suspended fine but when I 
tried to resume, it booted up, showed me the resume messages saying 
it was resuming, then reboots! And this keeps happening at each 
reboot -- an infinite loop basically. I finally had to boot without 
the resume= option to get it to boot properly. Is this a bug?

Thanks,
nirmal



-------------------------------------------------------
This SF.net email is sponsored by: IBM Linux Tutorials.
Become an expert in LINUX or just sharpen your skills.  Sign up for IBM's
Free Linux Tutorials.  Learn everything from the bash shell to sys admin.
Click now! http://ads.osdn.com/?ad_id=1278&alloc_id=3371&op=click

Re: acpi and 2.6.0 kernel - S3 doesn't resume, S4 = infinite loop

[Mads Paulin]

Hi,

I have just done exactly the same - just on a Mandrake 9.1 box
I tried this on an ASUS M2400N laptop also with the i855 chipset

The results were the same - only a hard reebot boot was working.

Regards,
Mads

On Mon, 2003-12-22 at 09:01, Nirmal Govind wrote:
> Hi.. I just compiled the 2.6.0 kernel that was released on Dec. 
> 18th... I have ACPI support with all the options enabled. I tried 
> suspending with S3 and it suspends fine (my power indicator starts 
> flashing which means that it has suspended). But when I hit the 
> power button, it does not resume properly, it tries to resume, the 
> power indicator stops flashing which means that it thinks it's woken 
> up, but all I see is a blank screen and hitting any of the keys 
> doesn't seem to do anything. Only thing that works is a hard reboot. 
> I'm running Mandrake 9.2 on a Fujitsu Lifebook S series (6120D) with 
> an Intel 855 chipset graphics adapter. Please let me know if there's 
> a way to get S3 to work well.
> 
> Also, I tried suspend with S4 and that suspended fine but when I 
> tried to resume, it booted up, showed me the resume messages saying 
> it was resuming, then reboots! And this keeps happening at each 
> reboot -- an infinite loop basically. I finally had to boot without 
> the resume= option to get it to boot properly. Is this a bug?
> 
> Thanks,
> nirmal
> 
> 
> 
> -------------------------------------------------------
> This SF.net email is sponsored by: IBM Linux Tutorials.
> Become an expert in LINUX or just sharpen your skills.  Sign up for IBM's
> Free Linux Tutorials.  Learn everything from the bash shell to sys admin.
> Click now! http://ads.osdn.com/?ad_id=1278&alloc_id=3371&op=click
> _______________________________________________
> Acpi-devel mailing list
> Acpi-devel-5NWGOfrQmneRv+LV9MX5uipxlwaOVQ5f@public.gmane.org
> https://lists.sourceforge.net/lists/listinfo/acpi-devel



-------------------------------------------------------
This SF.net email is sponsored by: IBM Linux Tutorials.
Become an expert in LINUX or just sharpen your skills.  Sign up for IBM's
Free Linux Tutorials.  Learn everything from the bash shell to sys admin.
Click now! http://ads.osdn.com/?ad_id=1278&alloc_id=3371&op=click