RE: Error Message at boot time

RE: Error Message at boot time

[Yu, Luming]

>     ACPI-0098: *** Error: Method execution failed [\_SB_.C005._CRS] 
>(Node c7fee980), AE_AML_BUFFER_LIMIT

Hmm, annother case of  buffer limit failure.
Can you send out  /proc/acpi/dsdt 



-------------------------------------------------------
This SF.net email is sponsored by: IBM Linux Tutorials.
Become an expert in LINUX or just sharpen your skills.  Sign up for IBM's
Free Linux Tutorials.  Learn everything from the bash shell to sys admin.
Click now! http://ads.osdn.com/?ad_id\x1278&alloc_id371&op=click

Re: Error Message at boot time

[Sebastian Kemper]

[-- Attachment #1: Type: text/plain, Size: 227 bytes --]

Sure

Yu, Luming wrote:
>>    ACPI-0098: *** Error: Method execution failed [\_SB_.C005._CRS] 
>>(Node c7fee980), AE_AML_BUFFER_LIMIT
> 
> 
> Hmm, annother case of  buffer limit failure.
> Can you send out  /proc/acpi/dsdt 
> 

[-- Attachment #2: dsdt.tar.bz2 --]
[-- Type: application/octet-stream, Size: 9421 bytes --]

RE: Error Message at boot time

[Yu, Luming]

> Sure
> 
> Yu, Luming wrote:
> >>    ACPI-0098: *** Error: Method execution failed [\_SB_.C005._CRS] 
> >>(Node c7fee980), AE_AML_BUFFER_LIMIT
> > 
> > 
> > Hmm, annother case of  buffer limit failure.
> > Can you send out  /proc/acpi/dsdt 
> > 

I'm sorry, this seems to be old issue, which has been fixed in latest
acpi.
Would you please try latest kernel.

BTW. if you have other problem regarding ACPICA, please firstly try
patch filed at 
http://bugme.osdl.org/show_bug.cgi?id=1766
http://bugme.osdl.org/show_bug.cgi?id=1791
 


-------------------------------------------------------
This SF.net email is sponsored by: Perforce Software.
Perforce is the Fast Software Configuration Management System offering
advanced branching capabilities and atomic changes on 50+ platforms.
Free Eval! http://www.perforce.com/perforce/loadprog.html

Error Message at boot time

[Sebastian Kemper]

Hello,

I get an error message on boot time. I don't think it's serious because 
everything seems to work fine. But maybe there is a way to get rid of it.

Errors:
ACPI: Subsystem revision 20031002
ACPI: IRQ 9 was Edge Triggered, setting to Level Triggerd
ACPI: Interpreter enabled
ACPI: Using PIC for interrupt routing
     ACPI-1120: *** Error: Method execution failed [\_SB_.C005.C00B] 
(Node c7fee940), AE_AML_BUFFER_LIMIT
     ACPI-1120: *** Error: Method execution failed [\_SB_.C005.C00F] 
(Node c7fee960), AE_AML_BUFFER_LIMIT
     ACPI-1120: *** Error: Method execution failed [\_SB_.C005._CRS] 
(Node c7fee980), AE_AML_BUFFER_LIMIT
     ACPI-0098: *** Error: Method execution failed [\_SB_.C005._CRS] 
(Node c7fee980), AE_AML_BUFFER_LIMIT
ACPI: PCI Root Bridge [C005] (00:00)
PCI: Probing PCI hardware (bus 00)
ACPI: PCI Interrupt Routing Table [\_SB_.C005._PRT]
ACPI: Power Resource [C129] (on)

The box is an older Compaq Laptop. Its name is Armada e500.

The Distro is a Gentoo 1.4. The kernel is a vanilla selfcompiled 2.6.0. 
I configured ACPI like this:

#
# ACPI (Advanced Configuration and Power Interface) Support
#
CONFIG_ACPI=y
CONFIG_ACPI_BOOT=y
CONFIG_ACPI_INTERPRETER=y
# CONFIG_ACPI_SLEEP is not set
CONFIG_ACPI_AC=y
CONFIG_ACPI_BATTERY=y
CONFIG_ACPI_BUTTON=y
CONFIG_ACPI_FAN=y
CONFIG_ACPI_PROCESSOR=y
CONFIG_ACPI_THERMAL=y
# CONFIG_ACPI_ASUS is not set
# CONFIG_ACPI_TOSHIBA is not set
# CONFIG_ACPI_DEBUG is not set
CONFIG_ACPI_BUS=y
CONFIG_ACPI_EC=y
CONFIG_ACPI_POWER=y
CONFIG_ACPI_PCI=y
CONFIG_ACPI_SYSTEM=y
# CONFIG_ACPI_RELAXED_AML is not set

I don't know what else to post at the moment. But if you like just tell 
me what you're missing and I'll post it.

Thanks!

Sebastian


-------------------------------------------------------
This SF.net email is sponsored by: IBM Linux Tutorials.
Become an expert in LINUX or just sharpen your skills.  Sign up for IBM's
Free Linux Tutorials.  Learn everything from the bash shell to sys admin.
Click now! http://ads.osdn.com/?ad_id=1278&alloc_id=3371&op=click