kern 2.6.1 - suspend/resume still malfunctioning

kern 2.6.1 - suspend/resume still malfunctioning

[Martin Lorenz]

Dear all,

well I am playing around to get suspend/resume working on my PC-MM10 for
quite a while now, and have run from one failing into the next...

lately I switched to vanilla 2.6.1 kernel to give it another try.

it somehow got better than before:
I can successfully resume now and the console is reactive again.
thats a real improvement!

but about a second after resume (when I hit the enter key the third
time) I got an Oops, that took about five seconds or more to scroll over
the screen (needless to say, that I could not read a word of what it was
saying) and ended up complaining about a panic in the interrupt handler.

maybe you can just tell me a patch, i could not find by myself...
I tried to go through the archive, but sf.net tells me, there would be
no archive for acpi-devel.

or is it a dsdt issue, and I should rather fix my dsdt? ...I'm afraid
i'd need some help in that case too.

all the data, i reported about my laptop is recorded with bug #1773
http://bugme.osdl.org/show_bug.cgi?id=1773

do you need anything else?
i am also willing and able to do some hacking too, but i don't quite
know where to start looking at.

greets and thanks
mlo
-- 
martin lorenz
--
	They that can give up essential liberty
	to obtain a little temporary safety
	deserve neither liberty nor safety.
				-- Benjamin Franklin




-------------------------------------------------------
This SF.net email is sponsored by: Perforce Software.
Perforce is the Fast Software Configuration Management System offering
advanced branching capabilities and atomic changes on 50+ platforms.
Free Eval! http://www.perforce.com/perforce/loadprog.html

Re: kern 2.6.1 - suspend/resume still malfunctioning

[Stefan Seyfried]

On Thu, Jan 15, 2004 at 02:10:57PM +0100, Martin Lorenz wrote:
> Dear all,
> 
> well I am playing around to get suspend/resume working on my PC-MM10 for
> quite a while now, and have run from one failing into the next...

> all the data, i reported about my laptop is recorded with bug #1773
> http://bugme.osdl.org/show_bug.cgi?id=1773

have you tried S4, e.g. "echo 4 > /proc/acpi/sleep"?
S3 is probably harder to get working than S4, so try S4 first.

I always test my machines in this order:
S4 > S1 > S3
with S3 i had not much luck on most of my machines.
-- 
Stefan Seyfried



-------------------------------------------------------
This SF.net email is sponsored by: Perforce Software.
Perforce is the Fast Software Configuration Management System offering
advanced branching capabilities and atomic changes on 50+ platforms.
Free Eval! http://www.perforce.com/perforce/loadprog.html

Re: Re: kern 2.6.1 - suspend/resume still malfunctioning

[Martin Lorenz]

Stefan Seyfried wrote:

> On Thu, Jan 15, 2004 at 02:10:57PM +0100, Martin Lorenz wrote:
> 
>>Dear all,
>>
>>well I am playing around to get suspend/resume working on my PC-MM10 for
>>quite a while now, and have run from one failing into the next...
> 
> 
>>all the data, i reported about my laptop is recorded with bug #1773
>>http://bugme.osdl.org/show_bug.cgi?id=1773
> 
> 
> have you tried S4, e.g. "echo 4 > /proc/acpi/sleep"?
> S3 is probably harder to get working than S4, so try S4 first.
> 
well...

with S4 i get a message, saying that my drive was not ready for that
command and it keeps telling me (lines by lines and never ending)

end_request: I/O error, dev hda, sector 1596164

so i it doesent even go to suspend(off)

greets
mlo
-- 
martin lorenz
--
	They that can give up essential liberty
	to obtain a little temporary safety
	deserve neither liberty nor safety.
				-- Benjamin Franklin



-------------------------------------------------------
This SF.net email is sponsored by: Perforce Software.
Perforce is the Fast Software Configuration Management System offering
advanced branching capabilities and atomic changes on 50+ platforms.
Free Eval! http://www.perforce.com/perforce/loadprog.html

Re: Re: kern 2.6.1 - suspend/resume still malfunctioning

[Martin Lorenz]

Martin Lorenz wrote:
> Stefan Seyfried wrote:
> 
> 
>>On Thu, Jan 15, 2004 at 02:10:57PM +0100, Martin Lorenz wrote:
>>
>>
>>>Dear all,
>>>
>>>well I am playing around to get suspend/resume working on my PC-MM10 for
>>>quite a while now, and have run from one failing into the next...
>>
>>
>>>all the data, i reported about my laptop is recorded with bug #1773
>>>http://bugme.osdl.org/show_bug.cgi?id=1773
>>
>>
>>have you tried S4, e.g. "echo 4 > /proc/acpi/sleep"?
>>S3 is probably harder to get working than S4, so try S4 first.
>>
> 
> well...
> 
> with S4 i get a message, saying that my drive was not ready for that
> command and it keeps telling me (lines by lines and never ending)
> 
> end_request: I/O error, dev hda, sector 1596164
> 
> so i it doesent even go to suspend(off)
> 

just tried to boot into /bin/bash and gave it another chance there
guess what: it suspended to ram and resumed without any
jinxes and oopses :-)

but what is this going to tell me as a kernel-imbecile???
-- 
martin lorenz
--
	They that can give up essential liberty
	to obtain a little temporary safety
	deserve neither liberty nor safety.
				-- Benjamin Franklin



-------------------------------------------------------
The SF.Net email is sponsored by EclipseCon 2004
Premiere Conference on Open Tools Development and Integration
See the breadth of Eclipse activity. February 3-5 in Anaheim, CA.
http://www.eclipsecon.org/osdn

Re: Re: kern 2.6.1 - suspend/resume still malfunctioning

[Pavel Machek]

Hi!

> >>>Dear all,
> >>>
> >>>well I am playing around to get suspend/resume working on my PC-MM10 for
> >>>quite a while now, and have run from one failing into the next...
> >>
> >>
> >>>all the data, i reported about my laptop is recorded with bug #1773
> >>>http://bugme.osdl.org/show_bug.cgi?id=1773
> >>
> >>
> >>have you tried S4, e.g. "echo 4 > /proc/acpi/sleep"?
> >>S3 is probably harder to get working than S4, so try S4 first.
> >>
> > 
> > well...
> > 
> > with S4 i get a message, saying that my drive was not ready for that
> > command and it keeps telling me (lines by lines and never ending)
> > 
> > end_request: I/O error, dev hda, sector 1596164

What about few lines before this?  mdelay(1000) into printk if you
must.

> > so i it doesent even go to suspend(off)
> > 
> 
> just tried to boot into /bin/bash and gave it another chance there
> guess what: it suspended to ram and resumed without any
> jinxes and oopses :-)
> 
> but what is this going to tell me as a kernel-imbecile???

Well, search which process breaks that.
								Pavel
-- 
When do you have a heart between your knees?
[Johanka's followup: and *two* hearts?]


-------------------------------------------------------
The SF.Net email is sponsored by EclipseCon 2004
Premiere Conference on Open Tools Development and Integration
See the breadth of Eclipse activity. February 3-5 in Anaheim, CA.
http://www.eclipsecon.org/osdn

RE: kern 2.6.1 - suspend/resume still malfunctioning

[Yu, Luming]

> all the data, i reported about my laptop is recorded with bug #1773
> http://bugme.osdl.org/show_bug.cgi?id=1773

Did you try with removing _init attribute of zap_low_mappings() ?



-------------------------------------------------------
The SF.Net email is sponsored by EclipseCon 2004
Premiere Conference on Open Tools Development and Integration
See the breadth of Eclipse activity. February 3-5 in Anaheim, CA.
http://www.eclipsecon.org/osdn