From mboxrd@z Thu Jan 1 00:00:00 1970 From: =?ISO-8859-1?Q?Lenar_L=F5hmus?= Subject: Re: 2.6.2-mm1 aka "Geriatric Wombat" Date: Fri, 06 Feb 2004 10:39:05 +0200 Sender: acpi-devel-admin-5NWGOfrQmneRv+LV9MX5uipxlwaOVQ5f@public.gmane.org Message-ID: <402352A9.7090705@vision.ee> References: <20040205014405.5a2cf529.akpm@osdl.org> <200402051357.04005.s0348365@sms.ed.ac.uk> <4022505B.1020900@vision.ee> <200402052130.30344.s0348365@sms.ed.ac.uk> Mime-Version: 1.0 Content-Type: text/plain; charset=ISO-8859-1; format=flowed Content-Transfer-Encoding: 7bit Return-path: In-Reply-To: <200402052130.30344.s0348365-Y3tGgqFSo3OFxr2TtlUqVg@public.gmane.org> Errors-To: acpi-devel-admin-5NWGOfrQmneRv+LV9MX5uipxlwaOVQ5f@public.gmane.org List-Unsubscribe: , List-Post: List-Help: List-Subscribe: , List-Archive: To: s0348365-Y3tGgqFSo3OFxr2TtlUqVg@public.gmane.org Cc: Arjen Verweij , Andrew Morton , =?ISO-8859-1?Q?Luis_Miguel_Garc=EDa?= , linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org, acpi-devel-5NWGOfrQmneRv+LV9MX5uipxlwaOVQ5f@public.gmane.org List-Id: linux-acpi@vger.kernel.org Alistair John Strachan wrote: >This fix doesn't work for me because I get problems if I disable ACPI IRQ >routing and still have apic enabled. Normally these problems would be >gracefully solved, but my USB HCD complains about not having been assigned an >IRQ. > > Actually it's exactly the same here I'm just not bothered by my USB HCD not having an IRQ since my USB mouse still works. It says this when booting: PCI: No IRQ known for interrupt pin A of device 0000:00:02.0. Please try using pci=biosirq. drivers/usb/core/hcd-pci.c: Found HC with no IRQ. Check BIOS/PCI 0000:00:02.0 setup! All I can say is that in 2.6.1-rc1-mm1 it worked and I could have all my interrupts off the XT-PIC. Lenar ------------------------------------------------------- The SF.Net email is sponsored by EclipseCon 2004 Premiere Conference on Open Tools Development and Integration See the breadth of Eclipse activity. February 3-5 in Anaheim, CA. http://www.eclipsecon.org/osdn