Linux version 2.6.2 (root@localhost) (gcc version 3.3.3 20040125 (prerelease) (Debian)) #2 Tue Feb 10 16:32:51 EET 2004 BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000009fc00 (usable) BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved) BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 000000001ffd0000 (usable) BIOS-e820: 000000001ffd0000 - 000000001fff0c00 (reserved) BIOS-e820: 000000001fff0c00 - 000000001fffc000 (ACPI NVS) BIOS-e820: 000000001fffc000 - 0000000020000000 (reserved) 511MB LOWMEM available. On node 0 totalpages: 131024 DMA zone: 4096 pages, LIFO batch:1 Normal zone: 126928 pages, LIFO batch:16 HighMem zone: 0 pages, LIFO batch:1 DMI 2.3 present. ACPI: RSDP (v000 COMPAQ ) @ 0x000f6a00 ACPI: RSDT (v001 COMPAQ CPQ00B7 0x18070320 CPQ 0x00000001) @ 0x1fff0c84 ACPI: FADT (v002 COMPAQ CPQ00B7 0x00000002 CPQ 0x00000001) @ 0x1fff0c00 ACPI: SSDT (v001 COMPAQ CPQGysr 0x00001001 MSFT 0x0100000e) @ 0x1fff6c5f ACPI: DSDT (v001 COMPAQ EVON610C 0x00010000 MSFT 0x0100000e) @ 0x00000000 Building zonelist for node : 0 Kernel command line: auto BOOT_IMAGE=Linux root=303 video=vesafb:nomtrr,ywrap No local APIC present or hardware disabled Initializing CPU#0 PID hash table entries: 2048 (order 11: 16384 bytes) Detected 1794.649 MHz processor. Using tsc for high-res timesource Console: colour dummy device 80x25 Memory: 515492k/524096k available (1536k kernel code, 7860k reserved, 692k data, 132k init, 0k highmem) Checking if this processor honours the WP bit even in supervisor mode... Ok. Calibrating delay loop... 3547.13 BogoMIPS Dentry cache hash table entries: 65536 (order: 6, 262144 bytes) Inode-cache hash table entries: 32768 (order: 5, 131072 bytes) Mount-cache hash table entries: 512 (order: 0, 4096 bytes) CPU: After generic identify, caps: bfebf9ff 00000000 00000000 00000000 CPU: After vendor identify, caps: bfebf9ff 00000000 00000000 00000000 CPU: Trace cache: 12K uops, L1 D cache: 8K CPU: L2 cache: 512K CPU: After all inits, caps: bfebf9ff 00000000 00000000 00000080 Intel machine check architecture supported. Intel machine check reporting enabled on CPU#0. CPU#0: Intel P4/Xeon Extended MCE MSRs (12) available CPU#0: Thermal monitoring enabled CPU: Intel Mobile Intel(R) Pentium(R) 4 - M CPU 1.80GHz stepping 07 Enabling fast FPU save and restore... done. Enabling unmasked SIMD FPU exception support... done. Checking 'hlt' instruction... OK. POSIX conformance testing by UNIFIX NET: Registered protocol family 16 PCI: PCI BIOS revision 2.10 entry at 0xf03a2, last bus=4 PCI: Using configuration type 1 mtrr: v2.0 (20020519) ACPI: Subsystem revision 20040116 ACPI: IRQ9 SCI: Edge set to Level Trigger. ACPI: Interpreter enabled ACPI: Using PIC for interrupt routing ACPI: PCI Root Bridge [C045] (00:00) PCI: Probing PCI hardware (bus 00) Transparent bridge - 0000:00:1e.0 ACPI: PCI Interrupt Routing Table [\_SB_.C045._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.C045.C046._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.C045.C058._PRT] ACPI: Power Resource [C15D] (on) ACPI: Power Resource [C171] (on) ACPI: Power Resource [C175] (on) ACPI: Power Resource [C178] (on) ACPI: Power Resource [C181] (on) ACPI: PCI Interrupt Link [C0C0] (IRQs 5 10 *11) ACPI: PCI Interrupt Link [C0C1] (IRQs 5 10 *11) ACPI: PCI Interrupt Link [C0C2] (IRQs 5 10 11) ACPI: PCI Interrupt Link [C0C3] (IRQs 5 10 *11) ACPI: PCI Interrupt Link [C0C4] (IRQs 5 *10 11) ACPI: PCI Interrupt Link [C0C5] (IRQs) ACPI: PCI Interrupt Link [C0C6] (IRQs) ACPI: PCI Interrupt Link [C0C7] (IRQs) ACPI: Power Resource [C1EB] (off) ACPI: Power Resource [C1EC] (off) ACPI: Power Resource [C1ED] (off) Linux Plug and Play Support v0.97 (c) Adam Belay PnPBIOS: Scanning system for PnP BIOS support... PnPBIOS: Found PnP BIOS installation structure at 0xc00f4330 PnPBIOS: PnP BIOS version 1.0, entry 0xf0000:0x435e, dseg 0xf0000 PnPBIOS: 16 nodes reported by PnP BIOS; 16 recorded by driver ACPI: PCI Interrupt Link [C0C2] enabled at IRQ 11 ACPI: PCI Interrupt Link [C0C1] enabled at IRQ 11 ACPI: PCI Interrupt Link [C0C0] enabled at IRQ 11 ACPI: PCI Interrupt Link [C0C3] enabled at IRQ 11 ACPI: PCI Interrupt Link [C0C4] enabled at IRQ 10 PCI: Using ACPI for IRQ routing PCI: if you experience problems, try using option 'pci=noacpi' or even 'acpi=off' vesafb: framebuffer at 0x48000000, mapped to 0xe0810000, size 16384k vesafb: mode is 1024x768x24, linelength=3072, pages=13 vesafb: protected mode interface info at c000:5651 vesafb: pmi: set display start = c00c56e5, set palette = c00c5731 vesafb: pmi: ports = 3010 3016 3054 3038 303c 305c 3000 3004 30b0 30b2 30b4 vesafb: scrolling: ywrap using protected mode interface, yres_virtual=5461 vesafb: directcolor: size=0:8:8:8, shift=0:16:8:0 fb0: VESA VGA frame buffer device ikconfig 0.7 with /proc/config* devfs: v1.22 (20021013) Richard Gooch (rgooch@atnf.csiro.au) devfs: boot_options: 0x1 Console: switching to colour frame buffer device 128x48 pty: 256 Unix98 ptys configured Real Time Clock Driver v1.12 Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx ICH3M: IDE controller at PCI slot 0000:00:1f.1 PCI: Enabling device 0000:00:1f.1 (0005 -> 0007) ICH3M: chipset revision 2 ICH3M: not 100% native mode: will probe irqs later ide0: BM-DMA at 0x4440-0x4447, BIOS settings: hda:DMA, hdb:pio ide1: BM-DMA at 0x4448-0x444f, BIOS settings: hdc:DMA, hdd:pio hda: IC25N040ATCS05-0, ATA DISK drive Using anticipatory io scheduler ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 hdc: HL-DT-STCD-RW/DVD DRIVE GCC-4240N, ATAPI CD/DVD-ROM drive ide1 at 0x170-0x177,0x376 on irq 15 hda: max request size: 128KiB hda: 78140160 sectors (40007 MB) w/7898KiB Cache, CHS=65535/16/63, UDMA(100) /dev/ide/host0/bus0/target0/lun0: p1 p2 p3 Console: switching to colour frame buffer device 128x48 mice: PS/2 mouse device common for all mice i8042.c: Detected active multiplexing controller, rev 1.1. serio: i8042 AUX0 port at 0x60,0x64 irq 12 serio: i8042 AUX1 port at 0x60,0x64 irq 12 serio: i8042 AUX2 port at 0x60,0x64 irq 12 serio: i8042 AUX3 port at 0x60,0x64 irq 12 serio: i8042 KBD port at 0x60,0x64 irq 1 input: AT Translated Set 2 keyboard on isa0060/serio0 NET: Registered protocol family 2 IP: routing cache hash table of 4096 buckets, 32Kbytes TCP: Hash tables configured (established 32768 bind 65536) NET: Registered protocol family 1 NET: Registered protocol family 17 ACPI: (supports S0 S3 S4 S4bios S5) found reiserfs format "3.6" with standard journal Reiserfs journal params: device hda3, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30 reiserfs: checking transaction log (hda3) for (hda3) Using r5 hash to sort names VFS: Mounted root (reiserfs filesystem) readonly. Mounted devfs on /dev Freeing unused kernel memory: 132k freed Adding 498920k swap on /dev/hda1. Priority:-1 extents:1 Removing [107725 107785 0x0 SD]..done Removing [97667 97685 0x0 SD]..done Removing [195 97665 0x0 SD]..done Removing [195 97628 0x0 SD]..done Removing [195 97487 0x0 SD]..done Removing [201 10568 0x0 SD]..done Removing [201 3323 0x0 SD]..done There were 7 uncompleted unlinks/truncates. Completed ACPI: Processor [C000] (supports C1 C2 C3, 8 throttling states) ACPI-1120: *** Error: Method execution failed [\_SB_.C045.C059.C0E2.C13F] (Node c157bd40), AE_AML_UNINITIALIZED_LOCAL ACPI-1120: *** Error: Method execution failed [\_SB_.C045.C059.C0E2.C14E] (Node c157bc40), AE_AML_UNINITIALIZED_LOCAL ACPI-1120: *** Error: Method execution failed [\_SB_.C198._BTP] (Node c1577d20), AE_AML_UNINITIALIZED_LOCAL ACPI: Battery Slot [C198] (battery present) ACPI: Battery Slot [C199] (battery absent) ACPI: Thermal Zone [TZ1] (58 C) ACPI: Thermal Zone [C1EA] (45 C) ACPI: Power Button (FF) [PWRF] ACPI: Sleep Button (CM) [C19B] ACPI: Lid Switch [C19C] ACPI: AC Adapter [C19A] (on-line) ACPI: Fan [C1EE] (off) ACPI: Fan [C1EF] (off) ACPI: Fan [C1F0] (off) Synaptics Touchpad, model: 1 Firmware: 5.8 180 degree mounted touchpad Sensor: 27 new absolute packet format Touchpad has extended capability bits -> multifinger detection -> palm detection -> pass-through port input: SynPS/2 Synaptics TouchPad on isa0060/serio4 serio: Synaptics pass-through port at isa0060/serio4/input0 input: PS/2 Generic Mouse on synaptics-pt/serio0 Linux agpgart interface v0.100 (c) Dave Jones agpgart: Detected an Intel i845 Chipset. agpgart: Maximum main memory to use for agp memory: 439M agpgart: AGP aperture is 256M @ 0x60000000 [drm] Initialized radeon 1.9.0 20020828 on minor 0 drivers/usb/core/usb.c: registered new driver usbfs drivers/usb/core/usb.c: registered new driver hub ehci_hcd 0000:02:0e.2: EHCI Host Controller ehci_hcd 0000:02:0e.2: irq 10, pci mem e191f000 ehci_hcd 0000:02:0e.2: new USB bus registered, assigned bus number 1 ehci_hcd 0000:02:0e.2: USB 2.0 enabled, EHCI 0.95, driver 2003-Dec-29 hub 1-0:1.0: USB hub found hub 1-0:1.0: 5 ports detected ohci_hcd: 2003 Oct 13 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI) ohci_hcd: block sizes: ed 64 td 64 ohci_hcd 0000:02:0e.0: OHCI Host Controller ohci_hcd 0000:02:0e.0: irq 10, pci mem e192c000 ohci_hcd 0000:02:0e.0: new USB bus registered, assigned bus number 2 hub 2-0:1.0: USB hub found hub 2-0:1.0: 3 ports detected ohci_hcd 0000:02:0e.1: OHCI Host Controller ohci_hcd 0000:02:0e.1: irq 10, pci mem e192e000 hub 2-0:1.0: new USB device on port 1, assigned address 2 ohci_hcd 0000:02:0e.1: new USB bus registered, assigned bus number 3 hub 3-0:1.0: USB hub found hub 3-0:1.0: 2 ports detected found reiserfs format "3.6" with standard journal Reiserfs journal params: device hda2, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30 reiserfs: checking transaction log (hda2) for (hda2) Using r5 hash to sort names Intel(R) PRO/100 Network Driver - version 2.3.30-k1 Copyright (c) 2003 Intel Corporation e100: selftest OK. e100: eth0: Intel(R) PRO/100 Network Connection Hardware receive checksums enabled e100: eth0 NIC Link is Up 100 Mbps Full duplex input: USB HID v1.10 Mouse [Logitech USB-PS/2 Optical Mouse] on usb-0000:02:0e.0-1 drivers/usb/core/usb.c: registered new driver hid drivers/usb/input/hid-core.c: v2.0:USB HID core driver PCI: Setting latency timer of device 0000:00:1f.5 to 64 intel8x0: clocking to 48000 Linux Kernel Card Services options: [pci] [cardbus] [pm] Yenta: CardBus bridge found at 0000:02:06.0 [0e11:00b7] Yenta: Enabling burst memory read transactions Yenta: Using CSCINT to route CSC interrupts to PCI Yenta: Routing CardBus interrupts to PCI Yenta: ISA IRQ mask 0x00f8, PCI irq 11 Socket status: 30000006 Yenta: CardBus bridge found at 0000:02:06.1 [0e11:00b7] Yenta: Using CSCINT to route CSC interrupts to PCI Yenta: Routing CardBus interrupts to PCI Yenta: ISA IRQ mask 0x00f8, PCI irq 11 Socket status: 30000006 cs: IO port probe 0x0c00-0x0cff: clean. cs: IO port probe 0x0800-0x08ff: clean. cs: IO port probe 0x0100-0x04ff: excluding 0x100-0x107 0x140-0x14f 0x378-0x37f 0x3e8-0x3ff 0x4d0-0x4d7 cs: IO port probe 0x0a00-0x0aff: clean. agpgart: Found an AGP 2.0 compliant device at 0000:00:00.0. agpgart: Putting AGP V2 device at 0000:00:00.0 into 1x mode agpgart: Putting AGP V2 device at 0000:01:00.0 into 1x mode atkbd.c: Unknown key released (translated set 2, code 0x7a on isa0060/serio0). atkbd.c: This is an XFree86 bug. It shouldn't access hardware directly. atkbd.c: Unknown key released (translated set 2, code 0x7a on isa0060/serio0). atkbd.c: This is an XFree86 bug. It shouldn't access hardware directly. agpgart: Found an AGP 2.0 compliant device at 0000:00:00.0. agpgart: Putting AGP V2 device at 0000:00:00.0 into 1x mode agpgart: Putting AGP V2 device at 0000:01:00.0 into 1x mode agpgart: Found an AGP 2.0 compliant device at 0000:00:00.0. agpgart: Putting AGP V2 device at 0000:00:00.0 into 1x mode agpgart: Putting AGP V2 device at 0000:01:00.0 into 1x mode agpgart: Found an AGP 2.0 compliant device at 0000:00:00.0. agpgart: Putting AGP V2 device at 0000:00:00.0 into 1x mode agpgart: Putting AGP V2 device at 0000:01:00.0 into 1x mode agpgart: Found an AGP 2.0 compliant device at 0000:00:00.0. agpgart: Putting AGP V2 device at 0000:00:00.0 into 1x mode agpgart: Putting AGP V2 device at 0000:01:00.0 into 1x mode