AC adapter status wrong after resume (swsusp, pmdsik) - the second...

AC adapter status wrong after resume (swsusp, pmdsik) - the second...

[Thomas Renninger]

Hi,

this issue was already discussed on the 22.03.04.
However, there was no real solution found, but unloading/loading modules.

I get the same on a compaq nx5000 (2.6.5 Kernel):
Suspend works fine.
If ac_adapter is (un-)plugged after suspend, when machine is off, the 
value in /proc is wrong after resume.
The workaround suggested (unload/load battery/ac module) seems not to 
work for this machine.

Someone wanted to open a bug, but I cannot find it.
What info do you need and I will open a bug report, maybe it has been 
forgotten?
Can someone give me some hints to localize/narrow this down a bit?

Thanks.

      Thomas

P.S.: Similar was the power button (FF) on older kernels:
I did not get events/interrupts when pressing the button after resume 
any more.
This seems to be fixed in 2.6.5. Thanks.



-------------------------------------------------------
This SF.Net email is sponsored by: IBM Linux Tutorials
Free Linux tutorial presented by Daniel Robbins, President and CEO of
GenToo technologies. Learn everything from fundamentals to system
administration.http://ads.osdn.com/?ad_id=1470&alloc_id=3638&op=click

Re: AC adapter status wrong after resume (swsusp, pmdsik) - the second...

[Thomas Renninger]

Thomas Renninger wrote:

> P.S.: Similar was the power button (FF) on older kernels:
> I did not get events/interrupts when pressing the button after resume 
> any more.
> This seems to be fixed in 2.6.5. Thanks.

Sorry I was wrong, I still load/unload the button module to get the it 
working after suspend.


-------------------------------------------------------
This SF.net email is sponsored by: The Robotic Monkeys at ThinkGeek
For a limited time only, get FREE Ground shipping on all orders of $35
or more. Hurry up and shop folks, this offer expires April 30th!
http://www.thinkgeek.com/freeshipping/?cpg=12297