PCI: Cannot allocate resource region 0 of device 0000:00:0d.0

[trooper ryan <trooper_ryan-QPf0Bz723pkjHdulDSg1yw@public.gmane.org>]

Hi,

I'm really struggling to get a Brooktree video-capture card functional 
under 2.6.5.  I think i've isolated the problem as dmesg reports:
PCI: Cannot allocate resource region 0 of device 0000:00:0d.0

That device corresponds to the card as shown by lspci -vvv (see below).

I tried passing the option pci=noacpi at boot, but still had problems.

I'd really appreciate any suggestions as i've been trying to get this 
card functional for about two weeks.  Im so frustrated Im almost 
considering putting it in an XP box!

Thanks,
Trooper


0000:00:0d.0 Multimedia video controller: Brooktree Corporation: Unknown 
device 034e (rev 11)
         Subsystem: LeadTek Research Inc.: Unknown device 6606
         Control: I/O- Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- 
ParErr- Stepping- SERR- FastB2B-
         Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium 
 >TAbort- <TAbort- <MAbort- >SERR- <PERR+
         Latency: 32 (4000ns min, 10000ns max)
         Interrupt: pin A routed to IRQ 11
         Region 0: Memory at <ignored> (32-bit, prefetchable) [disabled]
         Capabilities: [44] <chain broken>

0000:00:0d.1 Multimedia controller: Brooktree Corporation: Unknown 
device 0858 (rev 11)
         Subsystem: LeadTek Research Inc.: Unknown device 6606
         Control: I/O- Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- 
ParErr- Stepping- SERR- FastB2B-
         Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium 
 >TAbort- <TAbort- <MAbort- >SERR- <PERR+
         Latency: 32 (1000ns min, 63750ns max)
         Interrupt: pin A routed to IRQ 11
         Region 0: Memory at <ignored> (32-bit, prefetchable) [disabled]
         Capabilities: [44] <chain broken>

0000:01:00.0 VGA compatible controller: Silicon Integrated Systems [SiS] 
630/730 PCI/AGP VGA Display Adapter (rev 21) (prog-if 00 [VGA])
         Subsystem: Asustek Computer, Inc.: Unknown device 80e1
         Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- 
ParErr- Stepping- SERR- FastB2B-
         Status: Cap+ 66Mhz+ UDF- FastB2B+ ParErr- DEVSEL=medium 
 >TAbort- <TAbort- <MAbort- >SERR- <PERR-
         Interrupt: pin A routed to IRQ 11
         BIST result: 00
         Region 0: Memory at f0000000 (32-bit, prefetchable)
         Region 1: Memory at e9800000 (32-bit, non-prefetchable) [size=128K]
         Region 2: I/O ports at a800 [size=128]
         Capabilities: [40] Power Management version 1
                 Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA 
PME(D0-,D1-,D2-,D3hot-,D3cold-)
                 Status: D0 PME-Enable- DSel=0 DScale=0 PME-
         Capabilities: [50] AGP version 2.0
                 Status: RQ=16 Iso- ArqSz=0 Cal=0 SBA+ ITACoh- GART64- 
HTrans- 64bit- FW- AGP3- Rate=x1,x2,x4
                 Command: RQ=16 ArqSz=0 Cal=0 SBA+ AGP+ GART64- 64bit- 
FW- Rate=x4


-------------------------------------------------------
This SF.net email is sponsored by: The Robotic Monkeys at ThinkGeek
For a limited time only, get FREE Ground shipping on all orders of $35
or more. Hurry up and shop folks, this offer expires April 30th!
http://www.thinkgeek.com/freeshipping/?cpg=12297