From: Pierre Ossman <drzeus-list-p3sGCRWkH8CeZLLa646FqQ@public.gmane.org>
To: "Yu, Luming" <luming.yu-ral2JQCrhuEAvxtiuMwx3w@public.gmane.org>,
acpi-devel-5NWGOfrQmneRv+LV9MX5uipxlwaOVQ5f@public.gmane.org
Subject: Re: suspend-to-ram hangs on HP NX7010
Date: Wed, 09 Jun 2004 17:09:10 +0200 [thread overview]
Message-ID: <40C72816.70908@drzeus.cx> (raw)
In-Reply-To: <3ACA40606221794F80A5670F0AF15F8404991407-4yWAQGcml66Amxt+E6XRvg@public.gmane.org>
[-- Attachment #1: Type: text/plain, Size: 3631 bytes --]
Yu, Luming wrote:
>>I've been spending a few days trying to get suspend-to-ram to
>>work on my
>>new HP NX7010 laptop. Haven't had much success though so I thought I
>>might get some help from the more experienced.
>>
>>
>>
>
>Can you post the detailed HW info, as well as BIOS vendor/version?
>
>
>
I've attached dmidecode, lspci -vv and lsusb -vv. That should include
all the information you need.
The short summary is that it has a Pentium M 1.6GHz, intel 82801
chipset, IPW2200BG wlan, CSR bluetooth, ati radeon mobility 9200 (M9),
via firewire controller and rtl8139 network.
The bios seems to be HP's own. If it's made by someone else then they've
hidden it properly. It's the latest version F.34 but the problem was
identical with F.33, which the laptop was delivered with. The DSDT:s are
also identical.
>>I'm running FC2 with linux 2.6.6. S3 has been tested using vanilla
>>kernel and with the patch from acpi.sf.net. I've also included a patch
>>
>>
>>from the ACPI bugzilla to be able to control which devices can
>
>
>>wake the
>>unit. The behaviour has been the same for all tests.
>>
>>
>>
>
>What about S4?
>
>
>
S4 works fine. But with X running it's too slow to be useful. A normal
shutdown/startup is faster. S4bios is also available but I don't know
what partition it wants so I haven't tried it.
>>I don't think the unit actually gets all the way into S3 though. If I
>>turn on ACPI debug in the kernel I can see a debug message that says
>>'Entering S3' but the laptop doesn't power down anything. After this
>>point the only way to get control of the machine again is to hold down
>>the power button for a couple of seconds, bypassing the OS. Also, for
>>some strange reason I have to do this twice because the machine hangs
>>during POST after the first reset (after a failed suspend-to-ram that
>>is, works fine otherwise).
>>
>>
>>
>
>This is unusual. Now, the most S3 failure focus on resuming from ram.
>Can you track down which driver might causes the problem?
>
>
>
Don't really know how. I was hoping I could find where it stalls and
using the DSDT to figure out which device was causing the problem. Since
everything is integrated it's difficult to yank stuff out to eliminate
sources of problem. If you have any ideas on how to isolate drivers I'll
gladly try them out.
>>I've started looking in the ACPI spec. since I suspect the bug
>>might be
>>in the DSDT. I doesn't even compile cleanly with Intel's
>>
>>
>
>Did you find error message from ACPI?
>
>You know, AML interpreter is capable of catching AML bug. Although,
>sometimes, we have to fix interpreter , rather than AML code. :)
>
>
The error comes from when I try to compile with Intels compiler. The
error is:
dsdt.2.dsl 2515: Field (C13B, AnyAcc, Lock, Preserve)
Error 1048 - ^ Host Operation Region
requires ByteAcc access
But I found a page stating that solving this problem (by replacing
AnyAcc with ByteAcc) doesn't get suspend-to-ram working so I haven't
bothered trying. The page in question is
http://personal.eunet.fi/pp/joakim/nx7010.html.
As for getting output from the interpreter, I'm still trying to find a
good balance for the acpi debug_level. I tried setting it to 0x7ffffff,
which I figure gives me everything, wasn't very helpful since the screen
filled up rather quickly. I did note however that some commands after
"Entering state [S3]". These did not show when using a lower level
(0xff). Since the machine hangs after this it is difficult to get a dump
of the data.
Rgds
Pierre
[-- Attachment #2: dmidecode --]
[-- Type: text/plain, Size: 5398 bytes --]
# dmidecode 2.2
SMBIOS 2.3 present.
17 structures occupying 752 bytes.
Table at 0x000F17CC.
Handle 0x0000
DMI type 0, 20 bytes.
BIOS Information
Vendor: Hewlett-Packard
Version: 68BAL Ver. F.34
Release Date: 04/09/2004
Address: 0xE0000
Runtime Size: 128 kB
ROM Size: 512 kB
Characteristics:
PCI is supported
PC Card (PCMCIA) is supported
PNP is supported
APM is supported
BIOS is upgradeable
BIOS shadowing is allowed
Boot from CD is supported
Selectable boot is supported
EDD is supported
3.5"/720 KB floppy services are supported (int 13h)
Print screen service is supported (int 5h)
8042 keyboard services are supported (int 9h)
Serial services are supported (int 14h)
Printer services are supported (int 17h)
ACPI is supported
USB legacy is supported
AGP is supported
LS-120 boot is supported
Smart battery is supported
BIOS boot specification is supported
Function key-initiated network boot is supported
Handle 0x0001
DMI type 1, 25 bytes.
System Information
Manufacturer: Hewlett-Packard
Product Name: Compaq nx7010 (DU392T#AK8)
Version: F.34
Serial Number: CND420068Q
UUID: 08BB7CC4-23A4-D811-0680-669908246129
Wake-up Type: Power Switch
Handle 0x0002
DMI type 2, 8 bytes.
Base Board Information
Manufacturer: COMPAL
Product Name: 0860
Version: 8051 Version 24.52
Serial Number:
Handle 0x0003
DMI type 3, 13 bytes.
Chassis Information
Manufacturer: COMPAL
Type: Notebook
Lock: Not Present
Version: NULL
Serial Number: CND420068Q
Asset Tag:
Boot-up State: Safe
Power Supply State: Safe
Thermal State: Safe
Security Status: External Interface Enabled
Handle 0x0004
DMI type 4, 35 bytes.
Processor Information
Socket Designation: U10
Type: Central Processor
Family: Itanium 2
Manufacturer: Intel(R)
ID: 95 06 00 00 BF F9 E9 A7
Version: Intel(R) Pentium(R) M processor 1600MHz
Voltage: 1.8 V
External Clock: 100 MHz
Max Speed: 1600 MHz
Current Speed: 1600 MHz
Status: Populated, Enabled
Upgrade: None
L1 Cache Handle: 0x0005
L2 Cache Handle: 0x0006
L3 Cache Handle: Not Provided
Serial Number: Not Specified
Asset Tag: Not Specified
Part Number: Not Specified
Handle 0x0005
DMI type 7, 19 bytes.
Cache Information
Socket Designation: Internal L1 Cache
Configuration: Enabled, Not Socketed, Level 1
Operational Mode: Write Back
Location: Internal
Installed Size: 64 KB
Maximum Size: 64 KB
Supported SRAM Types:
Burst
Installed SRAM Type: Burst
Speed: Unknown
Error Correction Type: Unknown
System Type: Unified
Associativity: 4-way Set-associative
Handle 0x0006
DMI type 7, 19 bytes.
Cache Information
Socket Designation: Internal L2 Cache
Configuration: Enabled, Not Socketed, Level 2
Operational Mode: Write Back
Location: External
Installed Size: 1024 KB
Maximum Size: 1024 KB
Supported SRAM Types:
Burst
Installed SRAM Type: Burst
Speed: Unknown
Error Correction Type: None
System Type: Unified
Associativity: 4-way Set-associative
Handle 0x0007
DMI type 10, 8 bytes.
On Board Device Information
Type: Video
Status: Disabled
Description: M7CL
On Board Device Information
Type: Sound
Status: Disabled
Description: ADI981B
Handle 0x0008
DMI type 11, 5 bytes.
OEM Strings
String 1: Ownership Tag:
Handle 0x0009
DMI type 16, 15 bytes.
Physical Memory Array
Location: System Board Or Motherboard
Use: System Memory
Error Correction Type: None
Maximum Capacity: 1 GB
Error Information Handle: No Error
Number Of Devices: 2
Handle 0x000A
DMI type 17, 27 bytes.
Memory Device
Array Handle: 0x0009
Error Information Handle: No Error
Total Width: 64 bits
Data Width: 64 bits
Size: 256 MB
Form Factor: SODIMM
Set: None
Locator: DIMM #1
Bank Locator:
Type: DDR
Type Detail: Synchronous
Speed: Unknown
Manufacturer: Not Specified
Serial Number: Not Specified
Asset Tag: Not Specified
Part Number: Not Specified
Handle 0x000B
DMI type 17, 27 bytes.
Memory Device
Array Handle: 0x0009
Error Information Handle: No Error
Total Width: 64 bits
Data Width: 64 bits
Size: 256 MB
Form Factor: SODIMM
Set: None
Locator: DIMM #2
Bank Locator:
Type: DDR
Type Detail: Synchronous
Speed: Unknown
Manufacturer: Not Specified
Serial Number:
Asset Tag: Not Specified
Part Number: Not Specified
Handle 0x000C
DMI type 19, 15 bytes.
Memory Array Mapped Address
Starting Address: 0x00000000000
Ending Address: 0x0001FFFFFFF
Range Size: 512 MB
Physical Array Handle: 0x0009
Partition Width: 0
Handle 0x000D
DMI type 20, 19 bytes.
Memory Device Mapped Address
Starting Address: 0x00000000000
Ending Address: 0x0000FFFFFFF
Range Size: 256 MB
Physical Device Handle: 0x000A
Memory Array Mapped Address Handle: 0x000C
Partition Row Position: 1
Handle 0x000E
DMI type 20, 19 bytes.
Memory Device Mapped Address
Starting Address: 0x00010000000
Ending Address: 0x0001FFFFFFF
Range Size: 256 MB
Physical Device Handle: 0x000B
Memory Array Mapped Address Handle: 0x000C
Partition Row Position: 2
Handle 0x000F
DMI type 32, 11 bytes.
System Boot Information
Status: No errors detected
Handle 0x0010
DMI type 127, 4 bytes.
End Of Table
[-- Attachment #3: lspci --]
[-- Type: text/plain, Size: 10296 bytes --]
00:00.0 Host bridge: Intel Corp. 82855PM Processor to I/O Controller (rev 03)
Subsystem: Compaq Computer Corporation: Unknown device 0860
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ >SERR- <PERR-
Latency: 0
Region 0: Memory at b0000000 (32-bit, prefetchable)
Capabilities: [e4] #09 [4104]
Capabilities: [a0] AGP version 2.0
Status: RQ=32 Iso- ArqSz=0 Cal=0 SBA+ ITACoh- GART64- HTrans- 64bit- FW+ AGP3- Rate=x1,x2,x4
Command: RQ=1 ArqSz=0 Cal=0 SBA+ AGP+ GART64- 64bit- FW- Rate=x1
00:01.0 PCI bridge: Intel Corp. 82855PM Processor to AGP Controller (rev 03) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66Mhz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 128
Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
I/O behind bridge: 00003000-00003fff
Memory behind bridge: 90400000-904fffff
Prefetchable memory behind bridge: 98000000-9fffffff
Expansion ROM at 00003000 [disabled] [size=4K]
BridgeCtl: Parity- SERR- NoISA+ VGA+ MAbort- >Reset- FastB2B-
00:1d.0 USB Controller: Intel Corp. 82801DB (ICH4) USB UHCI #1 (rev 01) (prog-if 00 [UHCI])
Subsystem: Compaq Computer Corporation: Unknown device 0860
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 0
Interrupt: pin A routed to IRQ 10
Region 4: I/O ports at 48c0 [size=32]
00:1d.1 USB Controller: Intel Corp. 82801DB (ICH4) USB UHCI #2 (rev 01) (prog-if 00 [UHCI])
Subsystem: Compaq Computer Corporation: Unknown device 0860
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 0
Interrupt: pin B routed to IRQ 5
Region 4: I/O ports at 48e0 [size=32]
00:1d.2 USB Controller: Intel Corp. 82801DB (ICH4) USB UHCI #3 (rev 01) (prog-if 00 [UHCI])
Subsystem: Compaq Computer Corporation: Unknown device 0860
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 0
Interrupt: pin C routed to IRQ 5
Region 4: I/O ports at 4c00 [size=32]
00:1d.7 USB Controller: Intel Corp. 82801DB (ICH4) USB2 EHCI Controller (rev 01) (prog-if 20 [EHCI])
Subsystem: Compaq Computer Corporation: Unknown device 0860
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 0
Interrupt: pin D routed to IRQ 5
Region 0: Memory at a0000000 (32-bit, non-prefetchable)
Capabilities: [50] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=375mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [58] #0a [2080]
00:1e.0 PCI bridge: Intel Corp. 82801BAM/CAM PCI Bridge (rev 81) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR+
Latency: 0
Bus: primary=00, secondary=02, subordinate=03, sec-latency=32
I/O behind bridge: 00002000-00002fff
Memory behind bridge: 90000000-903fffff
BridgeCtl: Parity- SERR+ NoISA+ VGA- MAbort- >Reset- FastB2B-
00:1f.0 ISA bridge: Intel Corp. 82801DBM LPC Interface Controller (rev 01)
Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 0
00:1f.1 IDE interface: Intel Corp. 82801DBM (ICH4) Ultra ATA Storage Controller (rev 01) (prog-if 8a [Master SecP PriP])
Subsystem: Compaq Computer Corporation: Unknown device 0860
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 0
Interrupt: pin A routed to IRQ 5
Region 0: I/O ports at <unassigned>
Region 1: I/O ports at <unassigned>
Region 2: I/O ports at <unassigned>
Region 3: I/O ports at <unassigned>
Region 4: I/O ports at 4c40 [size=16]
Region 5: Memory at 20000000 (32-bit, non-prefetchable) [size=1K]
00:1f.3 SMBus: Intel Corp. 82801DB/DBM (ICH4) SMBus Controller (rev 01)
Subsystem: Compaq Computer Corporation: Unknown device 0860
Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Interrupt: pin B routed to IRQ 10
Region 4: I/O ports at 4c20 [size=32]
00:1f.5 Multimedia audio controller: Intel Corp. 82801DB (ICH4) AC'97 Audio Controller (rev 01)
Subsystem: Compaq Computer Corporation: Unknown device 0860
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 0
Interrupt: pin B routed to IRQ 10
Region 0: I/O ports at 4000
Region 1: I/O ports at 4880 [size=64]
Region 2: Memory at a0200000 (32-bit, non-prefetchable) [size=512]
Region 3: Memory at a0300000 (32-bit, non-prefetchable) [size=256]
Capabilities: [50] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=375mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
00:1f.6 Modem: Intel Corp. 82801DB (ICH4) AC'97 Modem Controller (rev 01) (prog-if 00 [Generic])
Subsystem: Compaq Computer Corporation: Unknown device 0860
Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Interrupt: pin B routed to IRQ 10
Region 0: I/O ports at 4400
Region 1: I/O ports at 4800 [size=128]
Capabilities: [50] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=375mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
01:00.0 VGA compatible controller: ATI Technologies Inc Radeon R250 Lf [Radeon Mobility 9000 M9] (rev 01) (prog-if 00 [VGA])
Subsystem: Compaq Computer Corporation: Unknown device 0860
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping+ SERR- FastB2B-
Status: Cap+ 66Mhz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 128 (2000ns min), Cache Line Size 08
Interrupt: pin A routed to IRQ 10
Region 0: Memory at 98000000 (32-bit, prefetchable)
Region 1: I/O ports at 3000 [size=256]
Region 2: Memory at 90400000 (32-bit, non-prefetchable) [size=64K]
Capabilities: [58] AGP version 2.0
Status: RQ=48 Iso- ArqSz=0 Cal=0 SBA+ ITACoh- GART64- HTrans- 64bit- FW+ AGP3- Rate=x1,x2,x4
Command: RQ=32 ArqSz=0 Cal=0 SBA+ AGP+ GART64- 64bit- FW- Rate=x1
Capabilities: [50] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
02:00.0 FireWire (IEEE 1394): VIA Technologies, Inc. IEEE 1394 Host Controller (rev 80) (prog-if 10 [OHCI])
Subsystem: VIA Technologies, Inc. IEEE 1394 Host Controller
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 128 (8000ns max), Cache Line Size 08
Interrupt: pin A routed to IRQ 10
Region 0: Memory at 90200000 (32-bit, non-prefetchable)
Region 1: I/O ports at 2400 [size=128]
Capabilities: [50] Power Management version 2
Flags: PMEClk- DSI- D1- D2+ AuxCurrent=0mA PME(D0-,D1-,D2+,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
02:01.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8139/8139C/8139C+ (rev 20)
Subsystem: Compaq Computer Corporation: Unknown device 0860
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 128 (8000ns min, 16000ns max), Cache Line Size 08
Interrupt: pin A routed to IRQ 10
Region 0: I/O ports at 2000
Region 1: Memory at 90300000 (32-bit, non-prefetchable) [size=256]
Capabilities: [50] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=375mA PME(D0-,D1+,D2+,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
02:02.0 Network controller: Intel Corp. Intel(R) PRO/Wireless 2200BG (rev 05)
Subsystem: Hewlett-Packard Company: Unknown device 12f6
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 128 (750ns min, 6000ns max), Cache Line Size 08
Interrupt: pin A routed to IRQ 5
Region 0: Memory at 90000000 (32-bit, non-prefetchable)
Capabilities: [dc] Power Management version 2
Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=1 PME-
02:04.0 CardBus bridge: ENE Technology Inc CB1410 Cardbus Controller (rev 01)
Subsystem: Compaq Computer Corporation: Unknown device 0860
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 168, Cache Line Size 10
Interrupt: pin A routed to IRQ 5
Region 0: Memory at 90100000 (32-bit, non-prefetchable)
Bus: primary=02, secondary=03, subordinate=06, sec-latency=176
Memory window 0: 20400000-207ff000 (prefetchable)
Memory window 1: 20800000-20bff000
I/O window 0: 00005000-000050ff
I/O window 1: 00005400-000054ff
BridgeCtl: Parity- SERR- ISA- VGA- MAbort- >Reset+ 16bInt+ PostWrite+
16-bit legacy interface ports at 0001
[-- Attachment #4: lsusb --]
[-- Type: text/plain, Size: 17104 bytes --]
Bus 004 Device 002: ID 049f:0086 Compaq Computer Corp.
Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 1.10
bDeviceClass 224 Wireless
bDeviceSubClass 1 Radio Frequency
bDeviceProtocol 1 Bluetooth
bMaxPacketSize0 64
idVendor 0x049f Compaq Computer Corp.
idProduct 0x0086
bcdDevice 8.02
iManufacturer 1 ACTIONTEC
iProduct 2 Bluetooth by hp
iSerial 0
bNumConfigurations 1
Configuration Descriptor:
bLength 9
bDescriptorType 2
wTotalLength 193
bNumInterfaces 3
bConfigurationValue 1
iConfiguration 0
bmAttributes 0xe0
Self Powered
Remote Wakeup
MaxPower 90mA
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 0
bNumEndpoints 3
bInterfaceClass 224 Wireless
bInterfaceSubClass 1 Radio Frequency
bInterfaceProtocol 1 Bluetooth
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x81 EP 1 IN
bmAttributes 3
Transfer Type Interrupt
Synch Type none
Usage Type Data
wMaxPacketSize 0x0010 bytes 16 once
bInterval 1
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x02 EP 2 OUT
bmAttributes 2
Transfer Type Bulk
Synch Type none
Usage Type Data
wMaxPacketSize 0x0040 bytes 64 once
bInterval 1
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x82 EP 2 IN
bmAttributes 2
Transfer Type Bulk
Synch Type none
Usage Type Data
wMaxPacketSize 0x0040 bytes 64 once
bInterval 1
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 1
bAlternateSetting 0
bNumEndpoints 2
bInterfaceClass 224 Wireless
bInterfaceSubClass 1 Radio Frequency
bInterfaceProtocol 1 Bluetooth
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x03 EP 3 OUT
bmAttributes 1
Transfer Type Isochronous
Synch Type none
Usage Type Data
wMaxPacketSize 0x0000 bytes 0 once
bInterval 1
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x83 EP 3 IN
bmAttributes 1
Transfer Type Isochronous
Synch Type none
Usage Type Data
wMaxPacketSize 0x0000 bytes 0 once
bInterval 1
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 1
bAlternateSetting 1
bNumEndpoints 2
bInterfaceClass 224 Wireless
bInterfaceSubClass 1 Radio Frequency
bInterfaceProtocol 1 Bluetooth
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x03 EP 3 OUT
bmAttributes 1
Transfer Type Isochronous
Synch Type none
Usage Type Data
wMaxPacketSize 0x0009 bytes 9 once
bInterval 1
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x83 EP 3 IN
bmAttributes 1
Transfer Type Isochronous
Synch Type none
Usage Type Data
wMaxPacketSize 0x0009 bytes 9 once
bInterval 1
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 1
bAlternateSetting 2
bNumEndpoints 2
bInterfaceClass 224 Wireless
bInterfaceSubClass 1 Radio Frequency
bInterfaceProtocol 1 Bluetooth
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x03 EP 3 OUT
bmAttributes 1
Transfer Type Isochronous
Synch Type none
Usage Type Data
wMaxPacketSize 0x0011 bytes 17 once
bInterval 1
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x83 EP 3 IN
bmAttributes 1
Transfer Type Isochronous
Synch Type none
Usage Type Data
wMaxPacketSize 0x0011 bytes 17 once
bInterval 1
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 1
bAlternateSetting 3
bNumEndpoints 2
bInterfaceClass 224 Wireless
bInterfaceSubClass 1 Radio Frequency
bInterfaceProtocol 1 Bluetooth
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x03 EP 3 OUT
bmAttributes 1
Transfer Type Isochronous
Synch Type none
Usage Type Data
wMaxPacketSize 0x0019 bytes 25 once
bInterval 1
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x83 EP 3 IN
bmAttributes 1
Transfer Type Isochronous
Synch Type none
Usage Type Data
wMaxPacketSize 0x0019 bytes 25 once
bInterval 1
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 1
bAlternateSetting 4
bNumEndpoints 2
bInterfaceClass 224 Wireless
bInterfaceSubClass 1 Radio Frequency
bInterfaceProtocol 1 Bluetooth
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x03 EP 3 OUT
bmAttributes 1
Transfer Type Isochronous
Synch Type none
Usage Type Data
wMaxPacketSize 0x0021 bytes 33 once
bInterval 1
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x83 EP 3 IN
bmAttributes 1
Transfer Type Isochronous
Synch Type none
Usage Type Data
wMaxPacketSize 0x0021 bytes 33 once
bInterval 1
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 1
bAlternateSetting 5
bNumEndpoints 2
bInterfaceClass 224 Wireless
bInterfaceSubClass 1 Radio Frequency
bInterfaceProtocol 1 Bluetooth
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x03 EP 3 OUT
bmAttributes 1
Transfer Type Isochronous
Synch Type none
Usage Type Data
wMaxPacketSize 0x0031 bytes 49 once
bInterval 1
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x83 EP 3 IN
bmAttributes 1
Transfer Type Isochronous
Synch Type none
Usage Type Data
wMaxPacketSize 0x0031 bytes 49 once
bInterval 1
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 2
bAlternateSetting 0
bNumEndpoints 0
bInterfaceClass 254 Application Specific Interface
bInterfaceSubClass 1 Device Firmware Update
bInterfaceProtocol 0
iInterface 0
unknown device class descriptor: 07 21 07 88 13 ff 03
Language IDs: (length=4)
0409 English(US)
Bus 004 Device 001: ID 0000:0000
Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 1.10
bDeviceClass 9 Hub
bDeviceSubClass 0 Unused
bDeviceProtocol 0
bMaxPacketSize0 8
idVendor 0x0000
idProduct 0x0000
bcdDevice 2.06
iManufacturer 3 Linux 2.6.6-mh3 uhci_hcd
iProduct 2 UHCI Host Controller
iSerial 1 0000:00:1d.2
bNumConfigurations 1
Configuration Descriptor:
bLength 9
bDescriptorType 2
wTotalLength 25
bNumInterfaces 1
bConfigurationValue 1
iConfiguration 0
bmAttributes 0x40
Self Powered
MaxPower 0mA
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 0
bNumEndpoints 1
bInterfaceClass 9 Hub
bInterfaceSubClass 0 Unused
bInterfaceProtocol 0
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x81 EP 1 IN
bmAttributes 3
Transfer Type Interrupt
Synch Type none
Usage Type Data
wMaxPacketSize 0x0002 bytes 2 once
bInterval 255
Hub Descriptor:
bLength 9
bDescriptorType 41
nNbrPorts 2
wHubCharacteristic 0x000a
No power switching (usb 1.0)
Per-port overcurrent protection
bPwrOn2PwrGood 1 * 2 milli seconds
bHubContrCurrent 0 milli Ampere
DeviceRemovable 0xbf
PortPwrCtrlMask 0xb8
Language IDs: (length=4)
0409 English(US)
Bus 003 Device 001: ID 0000:0000
Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 1.10
bDeviceClass 9 Hub
bDeviceSubClass 0 Unused
bDeviceProtocol 0
bMaxPacketSize0 8
idVendor 0x0000
idProduct 0x0000
bcdDevice 2.06
iManufacturer 3 Linux 2.6.6-mh3 uhci_hcd
iProduct 2 UHCI Host Controller
iSerial 1 0000:00:1d.1
bNumConfigurations 1
Configuration Descriptor:
bLength 9
bDescriptorType 2
wTotalLength 25
bNumInterfaces 1
bConfigurationValue 1
iConfiguration 0
bmAttributes 0x40
Self Powered
MaxPower 0mA
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 0
bNumEndpoints 1
bInterfaceClass 9 Hub
bInterfaceSubClass 0 Unused
bInterfaceProtocol 0
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x81 EP 1 IN
bmAttributes 3
Transfer Type Interrupt
Synch Type none
Usage Type Data
wMaxPacketSize 0x0002 bytes 2 once
bInterval 255
Hub Descriptor:
bLength 9
bDescriptorType 41
nNbrPorts 2
wHubCharacteristic 0x000a
No power switching (usb 1.0)
Per-port overcurrent protection
bPwrOn2PwrGood 1 * 2 milli seconds
bHubContrCurrent 0 milli Ampere
DeviceRemovable 0x00
PortPwrCtrlMask 0xb8
Language IDs: (length=4)
0409 English(US)
Bus 002 Device 001: ID 0000:0000
Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 1.10
bDeviceClass 9 Hub
bDeviceSubClass 0 Unused
bDeviceProtocol 0
bMaxPacketSize0 8
idVendor 0x0000
idProduct 0x0000
bcdDevice 2.06
iManufacturer 3 Linux 2.6.6-mh3 uhci_hcd
iProduct 2 UHCI Host Controller
iSerial 1 0000:00:1d.0
bNumConfigurations 1
Configuration Descriptor:
bLength 9
bDescriptorType 2
wTotalLength 25
bNumInterfaces 1
bConfigurationValue 1
iConfiguration 0
bmAttributes 0x40
Self Powered
MaxPower 0mA
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 0
bNumEndpoints 1
bInterfaceClass 9 Hub
bInterfaceSubClass 0 Unused
bInterfaceProtocol 0
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x81 EP 1 IN
bmAttributes 3
Transfer Type Interrupt
Synch Type none
Usage Type Data
wMaxPacketSize 0x0002 bytes 2 once
bInterval 255
Hub Descriptor:
bLength 9
bDescriptorType 41
nNbrPorts 2
wHubCharacteristic 0x000a
No power switching (usb 1.0)
Per-port overcurrent protection
bPwrOn2PwrGood 1 * 2 milli seconds
bHubContrCurrent 0 milli Ampere
DeviceRemovable 0x00
PortPwrCtrlMask 0xb8
Language IDs: (length=4)
0409 English(US)
Bus 001 Device 001: ID 0000:0000
Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 2.00
bDeviceClass 9 Hub
bDeviceSubClass 0 Unused
bDeviceProtocol 1 Single TT
bMaxPacketSize0 8
idVendor 0x0000
idProduct 0x0000
bcdDevice 2.06
iManufacturer 3 Linux 2.6.6-mh3 ehci_hcd
iProduct 2 EHCI Host Controller
iSerial 1 0000:00:1d.7
bNumConfigurations 1
Configuration Descriptor:
bLength 9
bDescriptorType 2
wTotalLength 25
bNumInterfaces 1
bConfigurationValue 1
iConfiguration 0
bmAttributes 0x40
Self Powered
MaxPower 0mA
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 0
bNumEndpoints 1
bInterfaceClass 9 Hub
bInterfaceSubClass 0 Unused
bInterfaceProtocol 0
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x81 EP 1 IN
bmAttributes 3
Transfer Type Interrupt
Synch Type none
Usage Type Data
wMaxPacketSize 0x0002 bytes 2 once
bInterval 12
Hub Descriptor:
bLength 9
bDescriptorType 41
nNbrPorts 6
wHubCharacteristic 0x0008
Ganged power switching
Per-port overcurrent protection
TT think time 8 FS bits
bPwrOn2PwrGood 10 * 2 milli seconds
bHubContrCurrent 0 milli Ampere
DeviceRemovable 0x00
PortPwrCtrlMask 0xb8
Language IDs: (length=4)
0409 English(US)
next prev parent reply other threads:[~2004-06-09 15:09 UTC|newest]
Thread overview: 9+ messages / expand[flat|nested] mbox.gz Atom feed top
2004-06-09 12:33 suspend-to-ram hangs on HP NX7010 Yu, Luming
[not found] ` <3ACA40606221794F80A5670F0AF15F8404991407-4yWAQGcml66Amxt+E6XRvg@public.gmane.org>
2004-06-09 15:09 ` Pierre Ossman [this message]
[not found] ` <40C72816.70908-p3sGCRWkH8CeZLLa646FqQ@public.gmane.org>
2004-06-09 15:25 ` Matthew Wilcox
-- strict thread matches above, loose matches on Subject: below --
2004-06-09 12:06 Pierre Ossman
[not found] ` <40C6FD44.7090606-p3sGCRWkH8CeZLLa646FqQ@public.gmane.org>
2004-06-14 22:58 ` Pierre Ossman
[not found] ` <40CE2DB0.9050208-p3sGCRWkH8CeZLLa646FqQ@public.gmane.org>
2004-06-16 12:36 ` Pierre Ossman
2004-06-18 19:56 ` Pierre Ossman
[not found] ` <40D348EC.8030903-p3sGCRWkH8CeZLLa646FqQ@public.gmane.org>
2004-06-19 3:29 ` Michael Frank
[not found] ` <opr9tnzbol4evsfm-TBR8pM7LtsqkE96DxU8f+dAkNl5+tjhE@public.gmane.org>
2004-06-19 7:23 ` Pierre Ossman
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=40C72816.70908@drzeus.cx \
--to=drzeus-list-p3sgcrwkh8cezlla646fqq@public.gmane.org \
--cc=acpi-devel-5NWGOfrQmneRv+LV9MX5uipxlwaOVQ5f@public.gmane.org \
--cc=luming.yu-ral2JQCrhuEAvxtiuMwx3w@public.gmane.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox