From: Franck Routier <franck.routier-i39dT1/MG/sAvxtiuMwx3w@public.gmane.org>
To: acpi-devel-5NWGOfrQmneRv+LV9MX5uipxlwaOVQ5f@public.gmane.org
Subject: Samsung X10
Date: Thu, 24 Jun 2004 17:04:43 +0200 [thread overview]
Message-ID: <40DAED8B.50105@axege.com> (raw)
Hi,
I am trying to install Debian Sid on a Samsung X10 laptop. ACPI is
required to handled power management.
The kernel I use is stock 2.6.6.
When I boot, I get the following messages (from a 'cat /var/log/messages
| grep ACPI') :
Jun 24 15:56:34 etamine kernel: BIOS-e820: 000000001ff70000 -
000000001ff7c000 (ACPI data)
Jun 24 15:56:34 etamine kernel: BIOS-e820: 000000001ff7c000 -
000000001ff80000 (ACPI NVS)
Jun 24 15:56:34 etamine kernel: ACPI: RSDP (v000
SENSX ) @ 0x000f7580
Jun 24 15:56:34 etamine kernel: ACPI: RSDT (v001 SENSX AQUILA
0x06040000 SENS 0x00000000) @ 0x1ff77eda
Jun 24 15:56:34 etamine kernel: ACPI: FADT (v001 SENSX SENSX10
0x06040000 SENS 0x00000050) @ 0x1ff7bf64
Jun 24 15:56:34 etamine kernel: ACPI: BOOT (v001 SENSX $SBFTBL$
0x06040000 SENS 0x00000001) @ 0x1ff7bfd8
Jun 24 15:56:34 etamine kernel: ACPI: SSDT (v001 INTEL EISTRef
0x00002000 INTL 0x02012044) @ 0x1ff77f0a
Jun 24 15:56:34 etamine kernel: ACPI: DSDT (v001 SENSX AQUILA
0x06040000 MSFT 0x0100000e) @ 0x00000000
Jun 24 15:56:34 etamine kernel: ACPI: PM-Timer IO Port: 0x1008
Jun 24 15:56:34 etamine kernel: ACPI: Subsystem revision 20040326
Jun 24 15:56:34 etamine kernel: ACPI: IRQ9 SCI: Edge set to Level Trigger.
Jun 24 15:56:34 etamine kernel: ACPI: Interpreter enabled
Jun 24 15:56:34 etamine kernel: ACPI: Using PIC for interrupt routing
Jun 24 15:56:34 etamine kernel: ACPI: PCI Root Bridge [PCI0] (00:00)
Jun 24 15:56:34 etamine kernel: ACPI: PCI Interrupt Link [LNKA] (IRQs *11)
Jun 24 15:56:34 etamine kernel: ACPI: PCI Interrupt Link [LNKB] (IRQs *11)
Jun 24 15:56:34 etamine kernel: ACPI: PCI Interrupt Link [LNKC] (IRQs *10)
Jun 24 15:56:34 etamine kernel: ACPI: PCI Interrupt Link [LNKD] (IRQs *10)
Jun 24 15:56:34 etamine kernel: ACPI: PCI Interrupt Link [LNKE] (IRQs *5)
Jun 24 15:56:34 etamine kernel: ACPI: PCI Interrupt Link [LNKF] (IRQs 5)
*0, disabled.
Jun 24 15:56:34 etamine kernel: ACPI: PCI Interrupt Link [LNKG] (IRQs
10) *0, disabled.
Jun 24 15:56:34 etamine kernel: ACPI: PCI Interrupt Link [LNKH] (IRQs *5)
Jun 24 15:56:34 etamine kernel: ACPI: Embedded Controller [H_EC] (gpe 28)
Jun 24 15:56:34 etamine kernel: ACPI-0347: *** Error: Handler for
[EmbeddedControl] returned AE_BAD_PARAMETER
Jun 24 15:56:34 etamine kernel: ACPI-1133: *** Error: Method
execution failed [\_SB_.PCI0.LPCB.H_EC._REG] (Node c14e7e1c),
AE_BAD_PARAMETER
Jun 24 15:56:34 etamine kernel: ACPI: Power Resource [PFAN] (on)
Jun 24 15:56:34 etamine kernel: ACPI: PCI Interrupt Link [LNKA] enabled
at IRQ 11
Jun 24 15:56:34 etamine kernel: ACPI: PCI Interrupt Link [LNKD] enabled
at IRQ 10
Jun 24 15:56:34 etamine kernel: ACPI: PCI Interrupt Link [LNKH] enabled
at IRQ 5
Jun 24 15:56:34 etamine kernel: ACPI: PCI Interrupt Link [LNKC] enabled
at IRQ 10
Jun 24 15:56:34 etamine kernel: ACPI: PCI Interrupt Link [LNKB] enabled
at IRQ 11
Jun 24 15:56:34 etamine kernel: ACPI: PCI Interrupt Link [LNKE] enabled
at IRQ 5
Jun 24 15:56:34 etamine kernel: PCI: Using ACPI for IRQ routing
Jun 24 15:56:35 etamine kernel: ACPI-0347: *** Error: Handler for
[EmbeddedControl] returned AE_BAD_PARAMETER
Jun 24 15:56:35 etamine kernel: ACPI-1133: *** Error: Method
execution failed [\_SB_.BAT1._STA] (Node c14eb51c), AE_AML_NO_RETURN_VALUE
Jun 24 15:56:35 etamine kernel: ACPI-0347: *** Error: Handler for
[EmbeddedControl] returned AE_BAD_PARAMETER
Jun 24 15:56:35 etamine kernel: ACPI-1133: *** Error: Method
execution failed [\_SB_.ADP1._PSR] (Node c14eb65c), AE_BAD_PARAMETER
Jun 24 15:56:35 etamine kernel: ACPI: Processor [CPU0] (supports C1 C2
C3, 8 throttling states)
Jun 24 15:56:35 etamine kernel: ACPI: Power Button (FF) [PWRF]
Jun 24 15:56:35 etamine kernel: ACPI: Lid Switch [LID0]
Jun 24 15:56:35 etamine kernel: ACPI: Sleep Button (CM) [SLPB]
Jun 24 15:56:35 etamine kernel: ACPI: Fan [FAN0] (on)
Jun 24 15:56:35 etamine kernel: ACPI-0347: *** Error: Handler for
[EmbeddedControl] returned AE_BAD_PARAMETER
Jun 24 15:56:35 etamine kernel: ACPI-1133: *** Error: Method
execution failed [\_TZ_.THRM._TMP] (Node c14eb8dc), AE_BAD_PARAMETER
The system boots up, but for example the battery is not recognized...
Any hint ?
Thanks,
Franck
-------------------------------------------------------
This SF.Net email sponsored by Black Hat Briefings & Training.
Attend Black Hat Briefings & Training, Las Vegas July 24-29 -
digital self defense, top technical experts, no vendor pitches,
unmatched networking opportunities. Visit www.blackhat.com
reply other threads:[~2004-06-24 15:04 UTC|newest]
Thread overview: [no followups] expand[flat|nested] mbox.gz Atom feed
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=40DAED8B.50105@axege.com \
--to=franck.routier-i39dt1/mg/savxtiumwx3w@public.gmane.org \
--cc=acpi-devel-5NWGOfrQmneRv+LV9MX5uipxlwaOVQ5f@public.gmane.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox