Re: b44 driver suspend/resume (was Re: Re: Re: various problems with Acer TM654, suspend, ACAD, radeon)

[Nathan Bryant <nbryant-p32f3XyCuykqcZcGjlUOXw@public.gmane.org>]

Norbert Preining wrote:
> Hi Nathan!
> 
> On Mit, 25 Aug 2004, Nathan Bryant wrote:
>>
>>Oops, never mind that. That's just because you hadn't ifup'd the device 
> 
> 
> I did.

Before you ran cat /proc/interrupts after resume? Are you sure? eth0 
didn't appear anywhere in there...

> 
> 
>>yet. But I still suspect a driver issue; your IRQ routing looks like it 
>>should be OK, but somebody is sending repeated interrupts. You could 
>>test with "acpi=noirq", but I don't think that will help.
> 
> 
> It worked!!!! Yes, no problems. Booting with acpi=noirq and loading the
> b44 module let it find irq 5 and it is working. I am writing this email
> from after a resume, even X worked out of the box.

Back to the drawing board. :( That means there's still something wrong 
with pci_link.c


-------------------------------------------------------
SF.Net email is sponsored by Shop4tech.com-Lowest price on Blank Media
100pk Sonic DVD-R 4x for only $29 -100pk Sonic DVD+R for only $33
Save 50% off Retail on Ink & Toner - Free Shipping and Free Gift.
http://www.shop4tech.com/z/Inkjet_Cartridges/9_108_r285