From: Carl-Daniel Hailfinger <c-d.hailfinger.kernel.2004-hi6Y0CQ0nG0@public.gmane.org>
To: acpi-devel-5NWGOfrQmneRv+LV9MX5uipxlwaOVQ5f@public.gmane.org
Cc: "Matthias Hentges"
<mailinglisten-H4PcyxPeSRnR7s880joybQ@public.gmane.org>,
"Stefan Dösinger" <stefandoesinger-RbZlAiThDcE@public.gmane.org>
Subject: Re: Re: Samsung P35 and S3 suspend
Date: Mon, 20 Dec 2004 19:12:21 +0100 [thread overview]
Message-ID: <41C71605.1040807@gmx.net> (raw)
In-Reply-To: <200412171649.08125.stefandoesinger-RbZlAiThDcE@public.gmane.org>
Stefan Dösinger schrieb:
>>That patch has been merged into the 6.8.x tree at X.Org three minutes ago,
>>so it will be in the 6.8.2 release.
>>
>>Did I understand correctly that with this patch should make POSTing the
>>card with boot-radeon unnecessary? Current 6_8_BRANCH X.Org is building
>>here at the moment, will report back when it is installed.
(I built X.Org CVS HEAD, but it has the same patch.)
> Yes, that's correct.
>
> It was AFAIK the first way to wake up the radeon card. boot-radeon was written
> based on the X11 patch.
Unfortunately, that fails on my Samsung P35. (Well, at least the display
backlight comes back and the machine doesn't crash.)
Messages by the X server after resume:
(WW) RADEON(0): zero MEMSIZE, probably at D3cold. Re-POSTing via int10.
(II) RADEON(0): Primary V_BIOS segment is: 0xc000
(EE) RADEON(0): unknown reason for exception
(II) RADEON(0): EAX=0x00004e08, EBX=0x00000106, ECX=0x00000000, EDX=0x000030fa
(II) RADEON(0): ESP=0x00000fb2, EBP=0x00000fba, ESI=0x00003d17, EDI=0x00000000
(II) RADEON(0): CS=0x5110, SS=0x0100, DS=0x0040, ES=0x0000, FS=0x0000, GS=0x0000
(II) RADEON(0): EIP=0x0000ffff, EFLAGS=0x00033206
(II) stack at 0x00001fb2:
aa 3d 00 f0 52 3d 18 f9 00 c0 00 00 00 00 f9 01
00 00 ce 0f 06 01 fa 30 00 00 08 4e f9 95 00 c0
46 32 ad 08 56 08 00 00 00 00 00 00 00 00 00 00
00 00 f8 0f 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 01 00 00 00 00 40 00 00 06 00 00
(II) RADEON(0): code at 0x000610ff:
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
(EE) RADEON(0): cannot continue
(II) RADEON(0): BIOS HotKeys Disabled
(II) Mouse[1]: ps2EnableDataReporting: succeeded
Especially CS:EIP looks suspicious.
So what step would be next? IIRC on the P35 needed a crashing VESA server
in addition to boot-radeon. Can that step be added somehow to the Radeon
X server?
Regards,
Carl-Daniel
--
http://www.hailfinger.org/
-------------------------------------------------------
SF email is sponsored by - The IT Product Guide
Read honest & candid reviews on hundreds of IT Products from real users.
Discover which products truly live up to the hype. Start reading now.
http://productguide.itmanagersjournal.com/
next prev parent reply other threads:[~2004-12-20 18:12 UTC|newest]
Thread overview: 31+ messages / expand[flat|nested] mbox.gz Atom feed top
2004-12-15 4:55 Samsung P35 and S3 suspend Carl-Daniel Hailfinger
[not found] ` <41BFC3AD.5030001-hi6Y0CQ0nG0@public.gmane.org>
2004-12-15 13:28 ` Matthias Hentges
2004-12-15 17:59 ` Carl-Daniel Hailfinger
[not found] ` <41C07B6F.70900-hi6Y0CQ0nG0@public.gmane.org>
2004-12-16 1:03 ` Matthias Hentges
2004-12-16 3:24 ` Carl-Daniel Hailfinger
[not found] ` <41C0FFF3.4010902-hi6Y0CQ0nG0@public.gmane.org>
2004-12-16 14:29 ` Carl-Daniel Hailfinger
[not found] ` <41C19BD8.7050201-hi6Y0CQ0nG0@public.gmane.org>
2004-12-16 17:32 ` Stefan Dösinger
[not found] ` <200412161832.09711.stefandoesinger-RbZlAiThDcE@public.gmane.org>
2004-12-16 18:28 ` Carl-Daniel Hailfinger
[not found] ` <41C1D3CB.5010805-hi6Y0CQ0nG0@public.gmane.org>
2004-12-16 20:57 ` Stefan Dösinger
[not found] ` <200412162157.02741.stefandoesinger-RbZlAiThDcE@public.gmane.org>
2004-12-16 21:10 ` Matthew Garrett
2004-12-16 21:26 ` Stefan Dösinger
[not found] ` <200412162226.43166.stefandoesinger-RbZlAiThDcE@public.gmane.org>
2004-12-16 21:42 ` Matthew Garrett
2004-12-17 0:25 ` Carl-Daniel Hailfinger
[not found] ` <41C22792.2000205-hi6Y0CQ0nG0@public.gmane.org>
2004-12-17 15:49 ` Stefan Dösinger
[not found] ` <200412171649.08125.stefandoesinger-RbZlAiThDcE@public.gmane.org>
2004-12-20 18:12 ` Carl-Daniel Hailfinger [this message]
2004-12-16 18:10 ` Carl-Daniel Hailfinger
[not found] ` <41C1CFA2.20304-hi6Y0CQ0nG0@public.gmane.org>
2004-12-16 18:41 ` Matthias Hentges
2004-12-16 19:09 ` Matthew Garrett
2004-12-20 20:34 ` Carl-Daniel Hailfinger
[not found] ` <41C7374D.6090407-hi6Y0CQ0nG0@public.gmane.org>
2004-12-21 0:39 ` Carl-Daniel Hailfinger
2004-12-22 2:06 ` Carl-Daniel Hailfinger
[not found] ` <41C8D689.3020502-hi6Y0CQ0nG0@public.gmane.org>
2004-12-22 11:37 ` Johan Vromans
[not found] ` <m2zn067edh.fsf-KjnUIgV0B0bak1Ioo/c9IoRWq/SkRNHw@public.gmane.org>
2004-12-22 15:35 ` Carl-Daniel Hailfinger
[not found] ` <41C9945E.9080101-hi6Y0CQ0nG0@public.gmane.org>
2004-12-26 12:13 ` Pavel Machek
[not found] ` <20041226121316.GA1590-I/5MKhXcvmPrBKCeMvbIDA@public.gmane.org>
2004-12-26 14:43 ` Stefan Dösinger
[not found] ` <20041226194039.GC1739@elf.ucw.cz>
[not found] ` <20041226194039.GC1739-I/5MKhXcvmPrBKCeMvbIDA@public.gmane.org>
2004-12-30 21:39 ` PATCH: Call acpi_leave_sleep_state before resuming devices Stefan Dösinger
-- strict thread matches above, loose matches on Subject: below --
2004-12-27 1:43 Re: Samsung P35 and S3 suspend Li, Shaohua
[not found] ` <16A54BF5D6E14E4D916CE26C9AD30575D82398-4yWAQGcml66iAffOGbnezLfspsVTdybXVpNB7YpNyf8@public.gmane.org>
2004-12-27 12:18 ` Stefan Dösinger
[not found] ` <200412271318.32251.stefandoesinger-RbZlAiThDcE@public.gmane.org>
2004-12-28 2:12 ` Li Shaohua
2004-12-27 2:08 Li, Shaohua
[not found] ` <16A54BF5D6E14E4D916CE26C9AD30575D823DC-4yWAQGcml66iAffOGbnezLfspsVTdybXVpNB7YpNyf8@public.gmane.org>
2004-12-27 11:51 ` Stefan Dösinger
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=41C71605.1040807@gmx.net \
--to=c-d.hailfinger.kernel.2004-hi6y0cq0ng0@public.gmane.org \
--cc=acpi-devel-5NWGOfrQmneRv+LV9MX5uipxlwaOVQ5f@public.gmane.org \
--cc=mailinglisten-H4PcyxPeSRnR7s880joybQ@public.gmane.org \
--cc=stefandoesinger-RbZlAiThDcE@public.gmane.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox