* ACPI gives error at boot
@ 2005-01-05 18:06 Necati DEMiR
[not found] ` <41DC2CC0.4070800-8b7qcxwNidXiQSDH/tmc6Q@public.gmane.org>
0 siblings, 1 reply; 2+ messages in thread
From: Necati DEMiR @ 2005-01-05 18:06 UTC (permalink / raw)
To: acpi-devel-5NWGOfrQmneRv+LV9MX5uipxlwaOVQ5f
hi,
i have problem with ACPI.
it gives error at boot.
i am sending some information.
#dmesg
.
.
.
Linux agpgart interface v0.100 (c) Dave Jones
agpgart: Detected an Intel i850 Chipset.
agpgart: Maximum main memory to use for agp memory: 203M
agpgart: AGP aperture is 64M @ 0xf8000000
cpci_hotplug: CompactPCI Hot Plug Core version: 0.2
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
ACPI-1133: *** Error: Method execution failed [\_SB_.PCI0.MDET]
(Node cfb56400), AE_AML_REGION_LIMIT
ACPI-1133: *** Error: Method execution failed [\_SB_.PCI0._CRS]
(Node cfb56500), AE_AML_REGION_LIMIT
ACPI-0154: *** Error: Method execution failed [\_SB_.PCI0._CRS]
(Node cfb56500), AE_AML_REGION_LIMIT
shpchp: acpi_shpchprm:\_SB_.PCI0 _CRS fail=0x300b
shpchp: acpi_shpchprm:\_SB_.PCI0 evaluate _CRS fail=0x300b
shpchp: shpc_init : shpc_cap_offset == 0
shpchp: shpc_init : shpc_cap_offset == 0
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
ACPI-1133: *** Error: Method execution failed [\_SB_.PCI0.MDET]
(Node cfb56400), AE_AML_REGION_LIMIT
ACPI-1133: *** Error: Method execution failed [\_SB_.PCI0._CRS]
(Node cfb56500), AE_AML_REGION_LIMIT
ACPI-0154: *** Error: Method execution failed [\_SB_.PCI0._CRS]
(Node cfb56500), AE_AML_REGION_LIMIT
pciehp: acpi_pciehprm:\_SB_.PCI0 _CRS fail=0x300b
pciehp: acpi_pciehprm:\_SB_.PCI0 evaluate _CRS fail=0x300b
pciehp: PCI Express Hot Plug Controller Driver version: 0.4
.
.
.
# cat /proc/interrupts
CPU0
0: 4954673 IO-APIC-edge timer
1: 1829 IO-APIC-edge i8042
7: 0 IO-APIC-edge parport0
8: 1 IO-APIC-edge rtc
9: 0 IO-APIC-level acpi
12: 136866 IO-APIC-edge i8042
14: 66145 IO-APIC-edge ide0
169: 0 IO-APIC-level uhci_hcd
177: 4553 IO-APIC-level Intel 82801BA-ICH2, saa7130[0]
185: 24 IO-APIC-level uhci_hcd
201: 52515 IO-APIC-level eth0
NMI: 0
LOC: 4954694
ERR: 0
MIS: 0
#lspci -vv
0000:00:00.0 Host bridge: Intel Corp. 82850 850 (Tehama) Chipset Host
Bridge (MCH) (rev 04)
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR+ FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort+ >SERR- <PERR-
Latency: 0
Region 0: Memory at f8000000 (32-bit, prefetchable) [size=64M]
Capabilities: [a0] AGP version 2.0
Status: RQ=32 Iso- ArqSz=0 Cal=0 SBA+ ITACoh- GART64-
HTrans- 64bit- FW+ AGP3- Rate=x1,x2,x4
Command: RQ=1 ArqSz=0 Cal=0 SBA- AGP- GART64- 64bit- FW-
Rate=<none>
0000:00:01.0 PCI bridge: Intel Corp. 82850 850 (Tehama) Chipset AGP
Bridge (rev 04) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR+ FastB2B-
Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 32
Bus: primary=00, secondary=01, subordinate=01, sec-latency=32
Memory behind bridge: fc900000-fe9fffff
Prefetchable memory behind bridge: e4600000-f46fffff
BridgeCtl: Parity- SERR+ NoISA- VGA+ MAbort- >Reset- FastB2B-
0000:00:1e.0 PCI bridge: Intel Corp. 82801 PCI Bridge (rev 04) (prog-if
00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR+ FastB2B-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 0
Bus: primary=00, secondary=02, subordinate=02, sec-latency=32
I/O behind bridge: 0000d000-0000dfff
Memory behind bridge: fea00000-feafffff
Prefetchable memory behind bridge: f4700000-f47fffff
BridgeCtl: Parity- SERR+ NoISA+ VGA- MAbort- >Reset- FastB2B-
0000:00:1f.0 ISA bridge: Intel Corp. 82801BA ISA Bridge (LPC) (rev 04)
Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 0
0000:00:1f.1 IDE interface: Intel Corp. 82801BA IDE U100 (rev 04)
(prog-if 80 [Master])
Subsystem: Intel Corp.: Unknown device 4d44
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 0
Region 4: I/O ports at ffa0 [size=16]
0000:00:1f.2 USB Controller: Intel Corp. 82801BA/BAM USB (Hub #1) (rev
04) (prog-if 00 [UHCI])
Subsystem: Intel Corp.: Unknown device 4d44
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 0
Interrupt: pin D routed to IRQ 169
Region 4: I/O ports at ef40 [size=32]
0000:00:1f.3 SMBus: Intel Corp. 82801BA/BAM SMBus (rev 04)
Subsystem: Intel Corp.: Unknown device 4d44
Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Interrupt: pin B routed to IRQ 177
Region 4: I/O ports at efa0 [size=16]
0000:00:1f.4 USB Controller: Intel Corp. 82801BA/BAM USB (Hub #2) (rev
04) (prog-if 00 [UHCI])
Subsystem: Intel Corp.: Unknown device 4d44
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 0
Interrupt: pin C routed to IRQ 185
Region 4: I/O ports at ef80 [size=32]
0000:00:1f.5 Multimedia audio controller: Intel Corp. 82801BA/BAM AC'97
Audio (rev 04)
Subsystem: Intel Corp.: Unknown device 4d44
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 0
Interrupt: pin B routed to IRQ 177
Region 0: I/O ports at e800 [size=256]
Region 1: I/O ports at ef00 [size=64]
0000:01:00.0 VGA compatible controller: nVidia Corporation NV11DDR
[GeForce2 MX 100 DDR/200 DDR] (rev b2) (prog-if 00 [VGA])
Subsystem: CardExpert Technology: Unknown device 0001
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 32 (1250ns min, 250ns max)
Interrupt: pin A routed to IRQ 193
Region 0: Memory at fd000000 (32-bit, non-prefetchable) [size=16M]
Region 1: Memory at e8000000 (32-bit, prefetchable) [size=128M]
Expansion ROM at fe9f0000 [disabled] [size=64K]
Capabilities: [60] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA
PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [44] AGP version 2.0
Status: RQ=32 Iso- ArqSz=0 Cal=0 SBA- ITACoh- GART64-
HTrans- 64bit- FW+ AGP3- Rate=x1,x2,x4
Command: RQ=1 ArqSz=0 Cal=0 SBA- AGP- GART64- 64bit- FW-
Rate=<none>
0000:02:0a.0 Ethernet controller: Davicom Semiconductor, Inc. 21x4x
DEC-Tulip compatible 10/100 Ethernet (rev 40)
Subsystem: Unknown device 3030:5032
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR+ FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 32 (5000ns min, 10000ns max)
Interrupt: pin A routed to IRQ 201
Region 0: I/O ports at d800 [size=256]
Region 1: Memory at feaffc00 (32-bit, non-prefetchable) [size=256]
Expansion ROM at fea80000 [disabled] [size=256K]
Capabilities: [50] Power Management version 2
Flags: PMEClk- DSI- D1- D2+ AuxCurrent=220mA
PME(D0+,D1+,D2+,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
0000:02:0c.0 Multimedia controller: Philips Semiconductors SAA7130 Video
Broadcast Decoder (rev 01)
Subsystem: Philips Semiconductors: Unknown device 0000
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 32 (3750ns min, 9500ns max)
Interrupt: pin A routed to IRQ 177
Region 0: Memory at feaff800 (32-bit, non-prefetchable) [size=1K]
Capabilities: [40] Power Management version 1
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA
PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
--
------------------------------------------------
Necati DEMiR
ndemir-8b7qcxwNidXiQSDH/tmc6Q@public.gmane.org
http://demir.web.tr
My Public Key => http://demir.web.tr/ndemir.asc
-------------------------------------------------
-------------------------------------------------------
The SF.Net email is sponsored by: Beat the post-holiday blues
Get a FREE limited edition SourceForge.net t-shirt from ThinkGeek.
It's fun and FREE -- well, almost....http://www.thinkgeek.com/sfshirt
^ permalink raw reply [flat|nested] 2+ messages in thread
* Re: ACPI gives error at boot
[not found] ` <41DC2CC0.4070800-8b7qcxwNidXiQSDH/tmc6Q@public.gmane.org>
@ 2005-01-06 14:44 ` Necati DEMiR
0 siblings, 0 replies; 2+ messages in thread
From: Necati DEMiR @ 2005-01-06 14:44 UTC (permalink / raw)
To: acpi-devel-5NWGOfrQmneRv+LV9MX5uipxlwaOVQ5f
Necati DEMiR wrote:
> hi,
> i have problem with ACPI.
> it gives error at boot.
> i am sending some information.
>
> #dmesg
> .
> .
> .
> Linux agpgart interface v0.100 (c) Dave Jones
> agpgart: Detected an Intel i850 Chipset.
> agpgart: Maximum main memory to use for agp memory: 203M
> agpgart: AGP aperture is 64M @ 0xf8000000
> cpci_hotplug: CompactPCI Hot Plug Core version: 0.2
> pci_hotplug: PCI Hot Plug PCI Core version: 0.5
> ACPI-1133: *** Error: Method execution failed [\_SB_.PCI0.MDET]
> (Node cfb56400), AE_AML_REGION_LIMIT
> ACPI-1133: *** Error: Method execution failed [\_SB_.PCI0._CRS]
> (Node cfb56500), AE_AML_REGION_LIMIT
> ACPI-0154: *** Error: Method execution failed [\_SB_.PCI0._CRS]
> (Node cfb56500), AE_AML_REGION_LIMIT
> shpchp: acpi_shpchprm:\_SB_.PCI0 _CRS fail=0x300b
> shpchp: acpi_shpchprm:\_SB_.PCI0 evaluate _CRS fail=0x300b
> shpchp: shpc_init : shpc_cap_offset == 0
> shpchp: shpc_init : shpc_cap_offset == 0
> shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
> ACPI-1133: *** Error: Method execution failed [\_SB_.PCI0.MDET]
> (Node cfb56400), AE_AML_REGION_LIMIT
> ACPI-1133: *** Error: Method execution failed [\_SB_.PCI0._CRS]
> (Node cfb56500), AE_AML_REGION_LIMIT
> ACPI-0154: *** Error: Method execution failed [\_SB_.PCI0._CRS]
> (Node cfb56500), AE_AML_REGION_LIMIT
> pciehp: acpi_pciehprm:\_SB_.PCI0 _CRS fail=0x300b
> pciehp: acpi_pciehprm:\_SB_.PCI0 evaluate _CRS fail=0x300b
> pciehp: PCI Express Hot Plug Controller Driver version: 0.4
> .
> .
> .
>
>
> # cat /proc/interrupts
> CPU0
> 0: 4954673 IO-APIC-edge timer
> 1: 1829 IO-APIC-edge i8042
> 7: 0 IO-APIC-edge parport0
> 8: 1 IO-APIC-edge rtc
> 9: 0 IO-APIC-level acpi
> 12: 136866 IO-APIC-edge i8042
> 14: 66145 IO-APIC-edge ide0
> 169: 0 IO-APIC-level uhci_hcd
> 177: 4553 IO-APIC-level Intel 82801BA-ICH2, saa7130[0]
> 185: 24 IO-APIC-level uhci_hcd
> 201: 52515 IO-APIC-level eth0
> NMI: 0
> LOC: 4954694
> ERR: 0
> MIS: 0
>
>
> #lspci -vv
> 0000:00:00.0 Host bridge: Intel Corp. 82850 850 (Tehama) Chipset Host
> Bridge (MCH) (rev 04)
> Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
> ParErr- Stepping- SERR+ FastB2B-
> Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort-
> <TAbort- <MAbort+ >SERR- <PERR-
> Latency: 0
> Region 0: Memory at f8000000 (32-bit, prefetchable) [size=64M]
> Capabilities: [a0] AGP version 2.0
> Status: RQ=32 Iso- ArqSz=0 Cal=0 SBA+ ITACoh- GART64-
> HTrans- 64bit- FW+ AGP3- Rate=x1,x2,x4
> Command: RQ=1 ArqSz=0 Cal=0 SBA- AGP- GART64- 64bit-
> FW- Rate=<none>
>
> 0000:00:01.0 PCI bridge: Intel Corp. 82850 850 (Tehama) Chipset AGP
> Bridge (rev 04) (prog-if 00 [Normal decode])
> Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
> ParErr- Stepping- SERR+ FastB2B-
> Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort-
> <TAbort- <MAbort- >SERR- <PERR-
> Latency: 32
> Bus: primary=00, secondary=01, subordinate=01, sec-latency=32
> Memory behind bridge: fc900000-fe9fffff
> Prefetchable memory behind bridge: e4600000-f46fffff
> BridgeCtl: Parity- SERR+ NoISA- VGA+ MAbort- >Reset- FastB2B-
>
> 0000:00:1e.0 PCI bridge: Intel Corp. 82801 PCI Bridge (rev 04)
> (prog-if 00 [Normal decode])
> Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
> ParErr- Stepping- SERR+ FastB2B-
> Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort-
> <TAbort- <MAbort- >SERR- <PERR-
> Latency: 0
> Bus: primary=00, secondary=02, subordinate=02, sec-latency=32
> I/O behind bridge: 0000d000-0000dfff
> Memory behind bridge: fea00000-feafffff
> Prefetchable memory behind bridge: f4700000-f47fffff
> BridgeCtl: Parity- SERR+ NoISA+ VGA- MAbort- >Reset- FastB2B-
>
> 0000:00:1f.0 ISA bridge: Intel Corp. 82801BA ISA Bridge (LPC) (rev 04)
> Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop-
> ParErr- Stepping- SERR- FastB2B-
> Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium
> >TAbort- <TAbort- <MAbort- >SERR- <PERR-
> Latency: 0
>
> 0000:00:1f.1 IDE interface: Intel Corp. 82801BA IDE U100 (rev 04)
> (prog-if 80 [Master])
> Subsystem: Intel Corp.: Unknown device 4d44
> Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop-
> ParErr- Stepping- SERR- FastB2B-
> Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium
> >TAbort- <TAbort- <MAbort- >SERR- <PERR-
> Latency: 0
> Region 4: I/O ports at ffa0 [size=16]
>
> 0000:00:1f.2 USB Controller: Intel Corp. 82801BA/BAM USB (Hub #1) (rev
> 04) (prog-if 00 [UHCI])
> Subsystem: Intel Corp.: Unknown device 4d44
> Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop-
> ParErr- Stepping- SERR- FastB2B-
> Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium
> >TAbort- <TAbort- <MAbort- >SERR- <PERR-
> Latency: 0
> Interrupt: pin D routed to IRQ 169
> Region 4: I/O ports at ef40 [size=32]
>
> 0000:00:1f.3 SMBus: Intel Corp. 82801BA/BAM SMBus (rev 04)
> Subsystem: Intel Corp.: Unknown device 4d44
> Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop-
> ParErr- Stepping- SERR- FastB2B-
> Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium
> >TAbort- <TAbort- <MAbort- >SERR- <PERR-
> Interrupt: pin B routed to IRQ 177
> Region 4: I/O ports at efa0 [size=16]
>
> 0000:00:1f.4 USB Controller: Intel Corp. 82801BA/BAM USB (Hub #2) (rev
> 04) (prog-if 00 [UHCI])
> Subsystem: Intel Corp.: Unknown device 4d44
> Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop-
> ParErr- Stepping- SERR- FastB2B-
> Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium
> >TAbort- <TAbort- <MAbort- >SERR- <PERR-
> Latency: 0
> Interrupt: pin C routed to IRQ 185
> Region 4: I/O ports at ef80 [size=32]
>
> 0000:00:1f.5 Multimedia audio controller: Intel Corp. 82801BA/BAM
> AC'97 Audio (rev 04)
> Subsystem: Intel Corp.: Unknown device 4d44
> Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop-
> ParErr- Stepping- SERR- FastB2B-
> Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium
> >TAbort- <TAbort- <MAbort- >SERR- <PERR-
> Latency: 0
> Interrupt: pin B routed to IRQ 177
> Region 0: I/O ports at e800 [size=256]
> Region 1: I/O ports at ef00 [size=64]
>
> 0000:01:00.0 VGA compatible controller: nVidia Corporation NV11DDR
> [GeForce2 MX 100 DDR/200 DDR] (rev b2) (prog-if 00 [VGA])
> Subsystem: CardExpert Technology: Unknown device 0001
> Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
> ParErr- Stepping- SERR- FastB2B-
> Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium
> >TAbort- <TAbort- <MAbort- >SERR- <PERR-
> Latency: 32 (1250ns min, 250ns max)
> Interrupt: pin A routed to IRQ 193
> Region 0: Memory at fd000000 (32-bit, non-prefetchable) [size=16M]
> Region 1: Memory at e8000000 (32-bit, prefetchable) [size=128M]
> Expansion ROM at fe9f0000 [disabled] [size=64K]
> Capabilities: [60] Power Management version 2
> Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA
> PME(D0-,D1-,D2-,D3hot-,D3cold-)
> Status: D0 PME-Enable- DSel=0 DScale=0 PME-
> Capabilities: [44] AGP version 2.0
> Status: RQ=32 Iso- ArqSz=0 Cal=0 SBA- ITACoh- GART64-
> HTrans- 64bit- FW+ AGP3- Rate=x1,x2,x4
> Command: RQ=1 ArqSz=0 Cal=0 SBA- AGP- GART64- 64bit-
> FW- Rate=<none>
>
> 0000:02:0a.0 Ethernet controller: Davicom Semiconductor, Inc. 21x4x
> DEC-Tulip compatible 10/100 Ethernet (rev 40)
> Subsystem: Unknown device 3030:5032
> Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
> ParErr- Stepping- SERR+ FastB2B-
> Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium
> >TAbort- <TAbort- <MAbort- >SERR- <PERR-
> Latency: 32 (5000ns min, 10000ns max)
> Interrupt: pin A routed to IRQ 201
> Region 0: I/O ports at d800 [size=256]
> Region 1: Memory at feaffc00 (32-bit, non-prefetchable) [size=256]
> Expansion ROM at fea80000 [disabled] [size=256K]
> Capabilities: [50] Power Management version 2
> Flags: PMEClk- DSI- D1- D2+ AuxCurrent=220mA
> PME(D0+,D1+,D2+,D3hot+,D3cold+)
> Status: D0 PME-Enable- DSel=0 DScale=0 PME-
>
> 0000:02:0c.0 Multimedia controller: Philips Semiconductors SAA7130
> Video Broadcast Decoder (rev 01)
> Subsystem: Philips Semiconductors: Unknown device 0000
> Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
> ParErr- Stepping- SERR- FastB2B-
> Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium
> >TAbort- <TAbort- <MAbort- >SERR- <PERR-
> Latency: 32 (3750ns min, 9500ns max)
> Interrupt: pin A routed to IRQ 177
> Region 0: Memory at feaff800 (32-bit, non-prefetchable) [size=1K]
> Capabilities: [40] Power Management version 1
> Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA
> PME(D0-,D1-,D2-,D3hot-,D3cold-)
> Status: D0 PME-Enable- DSel=0 DScale=0 PME-
>
>
>
>
--
------------------------------------------------
Necati DEMiR
ndemir-8b7qcxwNidXiQSDH/tmc6Q@public.gmane.org
http://demir.web.tr
My Public Key => http://demir.web.tr/ndemir.asc
-------------------------------------------------
-------------------------------------------------------
The SF.Net email is sponsored by: Beat the post-holiday blues
Get a FREE limited edition SourceForge.net t-shirt from ThinkGeek.
It's fun and FREE -- well, almost....http://www.thinkgeek.com/sfshirt
^ permalink raw reply [flat|nested] 2+ messages in thread
end of thread, other threads:[~2005-01-06 14:44 UTC | newest]
Thread overview: 2+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2005-01-05 18:06 ACPI gives error at boot Necati DEMiR
[not found] ` <41DC2CC0.4070800-8b7qcxwNidXiQSDH/tmc6Q@public.gmane.org>
2005-01-06 14:44 ` Necati DEMiR
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox