Re: ACPI gives error at boot

[Necati DEMiR <ndemir-8b7qcxwNidXiQSDH/tmc6Q@public.gmane.org>]

Necati DEMiR wrote:

> hi,
> i have problem with ACPI.
> it gives error at boot.
> i am sending some information.
>
> #dmesg
> .
> .
> .
> Linux agpgart interface v0.100 (c) Dave Jones
> agpgart: Detected an Intel i850 Chipset.
> agpgart: Maximum main memory to use for agp memory: 203M
> agpgart: AGP aperture is 64M @ 0xf8000000
> cpci_hotplug: CompactPCI Hot Plug Core version: 0.2
> pci_hotplug: PCI Hot Plug PCI Core version: 0.5
>    ACPI-1133: *** Error: Method execution failed [\_SB_.PCI0.MDET] 
> (Node cfb56400), AE_AML_REGION_LIMIT
>    ACPI-1133: *** Error: Method execution failed [\_SB_.PCI0._CRS] 
> (Node cfb56500), AE_AML_REGION_LIMIT
>    ACPI-0154: *** Error: Method execution failed [\_SB_.PCI0._CRS] 
> (Node cfb56500), AE_AML_REGION_LIMIT
> shpchp: acpi_shpchprm:\_SB_.PCI0 _CRS fail=0x300b
> shpchp: acpi_shpchprm:\_SB_.PCI0 evaluate _CRS fail=0x300b
> shpchp: shpc_init : shpc_cap_offset == 0
> shpchp: shpc_init : shpc_cap_offset == 0
> shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
>    ACPI-1133: *** Error: Method execution failed [\_SB_.PCI0.MDET] 
> (Node cfb56400), AE_AML_REGION_LIMIT
>    ACPI-1133: *** Error: Method execution failed [\_SB_.PCI0._CRS] 
> (Node cfb56500), AE_AML_REGION_LIMIT
>    ACPI-0154: *** Error: Method execution failed [\_SB_.PCI0._CRS] 
> (Node cfb56500), AE_AML_REGION_LIMIT
> pciehp: acpi_pciehprm:\_SB_.PCI0 _CRS fail=0x300b
> pciehp: acpi_pciehprm:\_SB_.PCI0 evaluate _CRS fail=0x300b
> pciehp: PCI Express Hot Plug Controller Driver version: 0.4
> .
> .
> .
>
>
> # cat /proc/interrupts
>           CPU0
>  0:    4954673    IO-APIC-edge  timer
>  1:       1829    IO-APIC-edge  i8042
>  7:          0    IO-APIC-edge  parport0
>  8:          1    IO-APIC-edge  rtc
>  9:          0   IO-APIC-level  acpi
> 12:     136866    IO-APIC-edge  i8042
> 14:      66145    IO-APIC-edge  ide0
> 169:          0   IO-APIC-level  uhci_hcd
> 177:       4553   IO-APIC-level  Intel 82801BA-ICH2, saa7130[0]
> 185:         24   IO-APIC-level  uhci_hcd
> 201:      52515   IO-APIC-level  eth0
> NMI:          0
> LOC:    4954694
> ERR:          0
> MIS:          0
>
>
> #lspci -vv
> 0000:00:00.0 Host bridge: Intel Corp. 82850 850 (Tehama) Chipset Host 
> Bridge (MCH) (rev 04)
>        Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- 
> ParErr- Stepping- SERR+ FastB2B-
>        Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- 
> <TAbort- <MAbort+ >SERR- <PERR-
>        Latency: 0
>        Region 0: Memory at f8000000 (32-bit, prefetchable) [size=64M]
>        Capabilities: [a0] AGP version 2.0
>                Status: RQ=32 Iso- ArqSz=0 Cal=0 SBA+ ITACoh- GART64- 
> HTrans- 64bit- FW+ AGP3- Rate=x1,x2,x4
>                Command: RQ=1 ArqSz=0 Cal=0 SBA- AGP- GART64- 64bit- 
> FW- Rate=<none>
>
> 0000:00:01.0 PCI bridge: Intel Corp. 82850 850 (Tehama) Chipset AGP 
> Bridge (rev 04) (prog-if 00 [Normal decode])
>        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- 
> ParErr- Stepping- SERR+ FastB2B-
>        Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- 
> <TAbort- <MAbort- >SERR- <PERR-
>        Latency: 32
>        Bus: primary=00, secondary=01, subordinate=01, sec-latency=32
>        Memory behind bridge: fc900000-fe9fffff
>        Prefetchable memory behind bridge: e4600000-f46fffff
>        BridgeCtl: Parity- SERR+ NoISA- VGA+ MAbort- >Reset- FastB2B-
>
> 0000:00:1e.0 PCI bridge: Intel Corp. 82801 PCI Bridge (rev 04) 
> (prog-if 00 [Normal decode])
>        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- 
> ParErr- Stepping- SERR+ FastB2B-
>        Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- 
> <TAbort- <MAbort- >SERR- <PERR-
>        Latency: 0
>        Bus: primary=00, secondary=02, subordinate=02, sec-latency=32
>        I/O behind bridge: 0000d000-0000dfff
>        Memory behind bridge: fea00000-feafffff
>        Prefetchable memory behind bridge: f4700000-f47fffff
>        BridgeCtl: Parity- SERR+ NoISA+ VGA- MAbort- >Reset- FastB2B-
>
> 0000:00:1f.0 ISA bridge: Intel Corp. 82801BA ISA Bridge (LPC) (rev 04)
>        Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- 
> ParErr- Stepping- SERR- FastB2B-
>        Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium 
> >TAbort- <TAbort- <MAbort- >SERR- <PERR-
>        Latency: 0
>
> 0000:00:1f.1 IDE interface: Intel Corp. 82801BA IDE U100 (rev 04) 
> (prog-if 80 [Master])
>        Subsystem: Intel Corp.: Unknown device 4d44
>        Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- 
> ParErr- Stepping- SERR- FastB2B-
>        Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium 
> >TAbort- <TAbort- <MAbort- >SERR- <PERR-
>        Latency: 0
>        Region 4: I/O ports at ffa0 [size=16]
>
> 0000:00:1f.2 USB Controller: Intel Corp. 82801BA/BAM USB (Hub #1) (rev 
> 04) (prog-if 00 [UHCI])
>        Subsystem: Intel Corp.: Unknown device 4d44
>        Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- 
> ParErr- Stepping- SERR- FastB2B-
>        Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium 
> >TAbort- <TAbort- <MAbort- >SERR- <PERR-
>        Latency: 0
>        Interrupt: pin D routed to IRQ 169
>        Region 4: I/O ports at ef40 [size=32]
>
> 0000:00:1f.3 SMBus: Intel Corp. 82801BA/BAM SMBus (rev 04)
>        Subsystem: Intel Corp.: Unknown device 4d44
>        Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- 
> ParErr- Stepping- SERR- FastB2B-
>        Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium 
> >TAbort- <TAbort- <MAbort- >SERR- <PERR-
>        Interrupt: pin B routed to IRQ 177
>        Region 4: I/O ports at efa0 [size=16]
>
> 0000:00:1f.4 USB Controller: Intel Corp. 82801BA/BAM USB (Hub #2) (rev 
> 04) (prog-if 00 [UHCI])
>        Subsystem: Intel Corp.: Unknown device 4d44
>        Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- 
> ParErr- Stepping- SERR- FastB2B-
>        Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium 
> >TAbort- <TAbort- <MAbort- >SERR- <PERR-
>        Latency: 0
>        Interrupt: pin C routed to IRQ 185
>        Region 4: I/O ports at ef80 [size=32]
>
> 0000:00:1f.5 Multimedia audio controller: Intel Corp. 82801BA/BAM 
> AC'97 Audio (rev 04)
>        Subsystem: Intel Corp.: Unknown device 4d44
>        Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- 
> ParErr- Stepping- SERR- FastB2B-
>        Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium 
> >TAbort- <TAbort- <MAbort- >SERR- <PERR-
>        Latency: 0
>        Interrupt: pin B routed to IRQ 177
>        Region 0: I/O ports at e800 [size=256]
>        Region 1: I/O ports at ef00 [size=64]
>
> 0000:01:00.0 VGA compatible controller: nVidia Corporation NV11DDR 
> [GeForce2 MX 100 DDR/200 DDR] (rev b2) (prog-if 00 [VGA])
>        Subsystem: CardExpert Technology: Unknown device 0001
>        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- 
> ParErr- Stepping- SERR- FastB2B-
>        Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium 
> >TAbort- <TAbort- <MAbort- >SERR- <PERR-
>        Latency: 32 (1250ns min, 250ns max)
>        Interrupt: pin A routed to IRQ 193
>        Region 0: Memory at fd000000 (32-bit, non-prefetchable) [size=16M]
>        Region 1: Memory at e8000000 (32-bit, prefetchable) [size=128M]
>        Expansion ROM at fe9f0000 [disabled] [size=64K]
>        Capabilities: [60] Power Management version 2
>                Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA 
> PME(D0-,D1-,D2-,D3hot-,D3cold-)
>                Status: D0 PME-Enable- DSel=0 DScale=0 PME-
>        Capabilities: [44] AGP version 2.0
>                Status: RQ=32 Iso- ArqSz=0 Cal=0 SBA- ITACoh- GART64- 
> HTrans- 64bit- FW+ AGP3- Rate=x1,x2,x4
>                Command: RQ=1 ArqSz=0 Cal=0 SBA- AGP- GART64- 64bit- 
> FW- Rate=<none>
>
> 0000:02:0a.0 Ethernet controller: Davicom Semiconductor, Inc. 21x4x 
> DEC-Tulip compatible 10/100 Ethernet (rev 40)
>        Subsystem: Unknown device 3030:5032
>        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- 
> ParErr- Stepping- SERR+ FastB2B-
>        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium 
> >TAbort- <TAbort- <MAbort- >SERR- <PERR-
>        Latency: 32 (5000ns min, 10000ns max)
>        Interrupt: pin A routed to IRQ 201
>        Region 0: I/O ports at d800 [size=256]
>        Region 1: Memory at feaffc00 (32-bit, non-prefetchable) [size=256]
>        Expansion ROM at fea80000 [disabled] [size=256K]
>        Capabilities: [50] Power Management version 2
>                Flags: PMEClk- DSI- D1- D2+ AuxCurrent=220mA 
> PME(D0+,D1+,D2+,D3hot+,D3cold+)
>                Status: D0 PME-Enable- DSel=0 DScale=0 PME-
>
> 0000:02:0c.0 Multimedia controller: Philips Semiconductors SAA7130 
> Video Broadcast Decoder (rev 01)
>        Subsystem: Philips Semiconductors: Unknown device 0000
>        Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- 
> ParErr- Stepping- SERR- FastB2B-
>        Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium 
> >TAbort- <TAbort- <MAbort- >SERR- <PERR-
>        Latency: 32 (3750ns min, 9500ns max)
>        Interrupt: pin A routed to IRQ 177
>        Region 0: Memory at feaff800 (32-bit, non-prefetchable) [size=1K]
>        Capabilities: [40] Power Management version 1
>                Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA 
> PME(D0-,D1-,D2-,D3hot-,D3cold-)
>                Status: D0 PME-Enable- DSel=0 DScale=0 PME-
>
>
>
>


-- 
------------------------------------------------
Necati DEMiR
ndemir-8b7qcxwNidXiQSDH/tmc6Q@public.gmane.org
http://demir.web.tr
My Public Key => http://demir.web.tr/ndemir.asc
-------------------------------------------------



-------------------------------------------------------
The SF.Net email is sponsored by: Beat the post-holiday blues
Get a FREE limited edition SourceForge.net t-shirt from ThinkGeek.
It's fun and FREE -- well, almost....http://www.thinkgeek.com/sfshirt