From mboxrd@z Thu Jan 1 00:00:00 1970 From: Necati DEMiR Subject: Re: ACPI gives error at boot Date: Thu, 06 Jan 2005 16:44:35 +0200 Message-ID: <41DD4ED3.7020205@demir.web.tr> References: <41DC2CC0.4070800@demir.web.tr> Mime-Version: 1.0 Content-Type: text/plain; charset=UTF-8; format=flowed Content-Transfer-Encoding: 7bit Return-path: In-Reply-To: <41DC2CC0.4070800-8b7qcxwNidXiQSDH/tmc6Q@public.gmane.org> Sender: acpi-devel-admin-5NWGOfrQmneRv+LV9MX5uipxlwaOVQ5f@public.gmane.org Errors-To: acpi-devel-admin-5NWGOfrQmneRv+LV9MX5uipxlwaOVQ5f@public.gmane.org List-Unsubscribe: , List-Post: List-Help: List-Subscribe: , List-Archive: To: acpi-devel-5NWGOfrQmneRv+LV9MX5uipxlwaOVQ5f@public.gmane.org List-Id: linux-acpi@vger.kernel.org Necati DEMiR wrote: > hi, > i have problem with ACPI. > it gives error at boot. > i am sending some information. > > #dmesg > . > . > . > Linux agpgart interface v0.100 (c) Dave Jones > agpgart: Detected an Intel i850 Chipset. > agpgart: Maximum main memory to use for agp memory: 203M > agpgart: AGP aperture is 64M @ 0xf8000000 > cpci_hotplug: CompactPCI Hot Plug Core version: 0.2 > pci_hotplug: PCI Hot Plug PCI Core version: 0.5 > ACPI-1133: *** Error: Method execution failed [\_SB_.PCI0.MDET] > (Node cfb56400), AE_AML_REGION_LIMIT > ACPI-1133: *** Error: Method execution failed [\_SB_.PCI0._CRS] > (Node cfb56500), AE_AML_REGION_LIMIT > ACPI-0154: *** Error: Method execution failed [\_SB_.PCI0._CRS] > (Node cfb56500), AE_AML_REGION_LIMIT > shpchp: acpi_shpchprm:\_SB_.PCI0 _CRS fail=0x300b > shpchp: acpi_shpchprm:\_SB_.PCI0 evaluate _CRS fail=0x300b > shpchp: shpc_init : shpc_cap_offset == 0 > shpchp: shpc_init : shpc_cap_offset == 0 > shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 > ACPI-1133: *** Error: Method execution failed [\_SB_.PCI0.MDET] > (Node cfb56400), AE_AML_REGION_LIMIT > ACPI-1133: *** Error: Method execution failed [\_SB_.PCI0._CRS] > (Node cfb56500), AE_AML_REGION_LIMIT > ACPI-0154: *** Error: Method execution failed [\_SB_.PCI0._CRS] > (Node cfb56500), AE_AML_REGION_LIMIT > pciehp: acpi_pciehprm:\_SB_.PCI0 _CRS fail=0x300b > pciehp: acpi_pciehprm:\_SB_.PCI0 evaluate _CRS fail=0x300b > pciehp: PCI Express Hot Plug Controller Driver version: 0.4 > . > . > . > > > # cat /proc/interrupts > CPU0 > 0: 4954673 IO-APIC-edge timer > 1: 1829 IO-APIC-edge i8042 > 7: 0 IO-APIC-edge parport0 > 8: 1 IO-APIC-edge rtc > 9: 0 IO-APIC-level acpi > 12: 136866 IO-APIC-edge i8042 > 14: 66145 IO-APIC-edge ide0 > 169: 0 IO-APIC-level uhci_hcd > 177: 4553 IO-APIC-level Intel 82801BA-ICH2, saa7130[0] > 185: 24 IO-APIC-level uhci_hcd > 201: 52515 IO-APIC-level eth0 > NMI: 0 > LOC: 4954694 > ERR: 0 > MIS: 0 > > > #lspci -vv > 0000:00:00.0 Host bridge: Intel Corp. 82850 850 (Tehama) Chipset Host > Bridge (MCH) (rev 04) > Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- > ParErr- Stepping- SERR+ FastB2B- > Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- > SERR- Latency: 0 > Region 0: Memory at f8000000 (32-bit, prefetchable) [size=64M] > Capabilities: [a0] AGP version 2.0 > Status: RQ=32 Iso- ArqSz=0 Cal=0 SBA+ ITACoh- GART64- > HTrans- 64bit- FW+ AGP3- Rate=x1,x2,x4 > Command: RQ=1 ArqSz=0 Cal=0 SBA- AGP- GART64- 64bit- > FW- Rate= > > 0000:00:01.0 PCI bridge: Intel Corp. 82850 850 (Tehama) Chipset AGP > Bridge (rev 04) (prog-if 00 [Normal decode]) > Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- > ParErr- Stepping- SERR+ FastB2B- > Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- > SERR- Latency: 32 > Bus: primary=00, secondary=01, subordinate=01, sec-latency=32 > Memory behind bridge: fc900000-fe9fffff > Prefetchable memory behind bridge: e4600000-f46fffff > BridgeCtl: Parity- SERR+ NoISA- VGA+ MAbort- >Reset- FastB2B- > > 0000:00:1e.0 PCI bridge: Intel Corp. 82801 PCI Bridge (rev 04) > (prog-if 00 [Normal decode]) > Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- > ParErr- Stepping- SERR+ FastB2B- > Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- > SERR- Latency: 0 > Bus: primary=00, secondary=02, subordinate=02, sec-latency=32 > I/O behind bridge: 0000d000-0000dfff > Memory behind bridge: fea00000-feafffff > Prefetchable memory behind bridge: f4700000-f47fffff > BridgeCtl: Parity- SERR+ NoISA+ VGA- MAbort- >Reset- FastB2B- > > 0000:00:1f.0 ISA bridge: Intel Corp. 82801BA ISA Bridge (LPC) (rev 04) > Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- > ParErr- Stepping- SERR- FastB2B- > Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium > >TAbort- SERR- Latency: 0 > > 0000:00:1f.1 IDE interface: Intel Corp. 82801BA IDE U100 (rev 04) > (prog-if 80 [Master]) > Subsystem: Intel Corp.: Unknown device 4d44 > Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- > ParErr- Stepping- SERR- FastB2B- > Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium > >TAbort- SERR- Latency: 0 > Region 4: I/O ports at ffa0 [size=16] > > 0000:00:1f.2 USB Controller: Intel Corp. 82801BA/BAM USB (Hub #1) (rev > 04) (prog-if 00 [UHCI]) > Subsystem: Intel Corp.: Unknown device 4d44 > Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- > ParErr- Stepping- SERR- FastB2B- > Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium > >TAbort- SERR- Latency: 0 > Interrupt: pin D routed to IRQ 169 > Region 4: I/O ports at ef40 [size=32] > > 0000:00:1f.3 SMBus: Intel Corp. 82801BA/BAM SMBus (rev 04) > Subsystem: Intel Corp.: Unknown device 4d44 > Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- > ParErr- Stepping- SERR- FastB2B- > Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium > >TAbort- SERR- Interrupt: pin B routed to IRQ 177 > Region 4: I/O ports at efa0 [size=16] > > 0000:00:1f.4 USB Controller: Intel Corp. 82801BA/BAM USB (Hub #2) (rev > 04) (prog-if 00 [UHCI]) > Subsystem: Intel Corp.: Unknown device 4d44 > Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- > ParErr- Stepping- SERR- FastB2B- > Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium > >TAbort- SERR- Latency: 0 > Interrupt: pin C routed to IRQ 185 > Region 4: I/O ports at ef80 [size=32] > > 0000:00:1f.5 Multimedia audio controller: Intel Corp. 82801BA/BAM > AC'97 Audio (rev 04) > Subsystem: Intel Corp.: Unknown device 4d44 > Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- > ParErr- Stepping- SERR- FastB2B- > Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium > >TAbort- SERR- Latency: 0 > Interrupt: pin B routed to IRQ 177 > Region 0: I/O ports at e800 [size=256] > Region 1: I/O ports at ef00 [size=64] > > 0000:01:00.0 VGA compatible controller: nVidia Corporation NV11DDR > [GeForce2 MX 100 DDR/200 DDR] (rev b2) (prog-if 00 [VGA]) > Subsystem: CardExpert Technology: Unknown device 0001 > Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- > ParErr- Stepping- SERR- FastB2B- > Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium > >TAbort- SERR- Latency: 32 (1250ns min, 250ns max) > Interrupt: pin A routed to IRQ 193 > Region 0: Memory at fd000000 (32-bit, non-prefetchable) [size=16M] > Region 1: Memory at e8000000 (32-bit, prefetchable) [size=128M] > Expansion ROM at fe9f0000 [disabled] [size=64K] > Capabilities: [60] Power Management version 2 > Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA > PME(D0-,D1-,D2-,D3hot-,D3cold-) > Status: D0 PME-Enable- DSel=0 DScale=0 PME- > Capabilities: [44] AGP version 2.0 > Status: RQ=32 Iso- ArqSz=0 Cal=0 SBA- ITACoh- GART64- > HTrans- 64bit- FW+ AGP3- Rate=x1,x2,x4 > Command: RQ=1 ArqSz=0 Cal=0 SBA- AGP- GART64- 64bit- > FW- Rate= > > 0000:02:0a.0 Ethernet controller: Davicom Semiconductor, Inc. 21x4x > DEC-Tulip compatible 10/100 Ethernet (rev 40) > Subsystem: Unknown device 3030:5032 > Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- > ParErr- Stepping- SERR+ FastB2B- > Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium > >TAbort- SERR- Latency: 32 (5000ns min, 10000ns max) > Interrupt: pin A routed to IRQ 201 > Region 0: I/O ports at d800 [size=256] > Region 1: Memory at feaffc00 (32-bit, non-prefetchable) [size=256] > Expansion ROM at fea80000 [disabled] [size=256K] > Capabilities: [50] Power Management version 2 > Flags: PMEClk- DSI- D1- D2+ AuxCurrent=220mA > PME(D0+,D1+,D2+,D3hot+,D3cold+) > Status: D0 PME-Enable- DSel=0 DScale=0 PME- > > 0000:02:0c.0 Multimedia controller: Philips Semiconductors SAA7130 > Video Broadcast Decoder (rev 01) > Subsystem: Philips Semiconductors: Unknown device 0000 > Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- > ParErr- Stepping- SERR- FastB2B- > Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium > >TAbort- SERR- Latency: 32 (3750ns min, 9500ns max) > Interrupt: pin A routed to IRQ 177 > Region 0: Memory at feaff800 (32-bit, non-prefetchable) [size=1K] > Capabilities: [40] Power Management version 1 > Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA > PME(D0-,D1-,D2-,D3hot-,D3cold-) > Status: D0 PME-Enable- DSel=0 DScale=0 PME- > > > > -- ------------------------------------------------ Necati DEMiR ndemir-8b7qcxwNidXiQSDH/tmc6Q@public.gmane.org http://demir.web.tr My Public Key => http://demir.web.tr/ndemir.asc ------------------------------------------------- ------------------------------------------------------- The SF.Net email is sponsored by: Beat the post-holiday blues Get a FREE limited edition SourceForge.net t-shirt from ThinkGeek. It's fun and FREE -- well, almost....http://www.thinkgeek.com/sfshirt