public inbox for linux-acpi@vger.kernel.org
 help / color / mirror / Atom feed
* Platform development position at Red Hat
@ 2005-01-10 16:22 Tim Burke
  0 siblings, 0 replies; only message in thread
From: Tim Burke @ 2005-01-10 16:22 UTC (permalink / raw)
  To: acpi-devel-5NWGOfrQmneRv+LV9MX5uipxlwaOVQ5f

Hi All,

We have a position available at Red Hat which may be of interest to some 
people on this list.
Position: Kernel Platform Engineer
Company: Red Hat
Location: Westford, Massachusetts, USA

Responsible for low-level kernel platform support of x86 and x86-64 
systems. Relevant subsystems include ACPI, memory and interrupt 
controllers, IO and DMA controllers, and firmware/BIOS interfaces.  In 
this role you will be responsible for enhancing Red Hat's product set to 
be operational with new hardware from a wide range of vendors.  In Red 
Hat's unique position as a fully open source company, you will be 
working with, and contributing code to the upstream Linux community.

Requirements include 3 or more years of active Linux kernel 
development.  Demonstrated upstream involvement and contribution is a 
strong plus.  Prior experience in platform support is a prerequisite.  
Strong communication skills are required as you will be engaged with the 
upstream community as well as a range of hardware vendors.

If interested, please send your resume to Tim Burke, tburke-H+wXaHxf7aKXj1p+fO2waQ@public.gmane.org



-------------------------------------------------------
The SF.Net email is sponsored by: Beat the post-holiday blues
Get a FREE limited edition SourceForge.net t-shirt from ThinkGeek.
It's fun and FREE -- well, almost....http://www.thinkgeek.com/sfshirt

^ permalink raw reply	[flat|nested] only message in thread

only message in thread, other threads:[~2005-01-10 16:22 UTC | newest]

Thread overview: (only message) (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2005-01-10 16:22 Platform development position at Red Hat Tim Burke

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox