Re: Smart Battery System driver

[Pedro Venda <pjvenda-pQd4kjVL+REh2FBCd0jGRA@public.gmane.org>]

-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1

Rich Townsend wrote:
| Hi all --
|
| Recently, Bruno Ducrot posted a driver that allows access to smart
| batteries, through the /dev/i2c interface. This came at just the right
| time for me, since I'd recently purchased an Acer TravelMate 4502, and
| had no way to monitor the status of the smart battery.

hi rich,

Bruno also said a working driver was about to be released...

anyway I've tested your driver and have some results to show you:

this is what I get from a modified version of bruno ducrot's smartbattery
userspace program

- -----------------------------------------------------------
archon smartbatt-head # ./smartbattery 5 -a

smart battery manufacturer information

manufacturer name:              SMP-SONY
device name:                    04ZL
manufacture date (yyyy/mm/dd):  2004/8/17
serial number:                  1

smart battery device specs

device chemistry:               LION
design voltage:                 14800 mV
design charge capacity:         4400 mAh

smart battery device state

charger:                        charging (almost full)
relative charge:                99%
full charge capacity:           3687 mAh
remain:                         3667 mAh
current input:                  0 mA
average time to empty:          n/a
average time to full:           n/a
temperature:                    20.8 C
voltage:                        16752 mV
remaining_capacity_alarm:       disabled
charge cycle count:             22
archon smartbatt-head #
- ------------------------------------------------------------

assuming the values are right, let's see:

archon BAT0 # pwd
/proc/acpi/battery/BAT0
archon BAT0 # cat info
present:                 yes
design capacity:         80 mAh
last full capacity:      10 mAh
battery technology:      rechargeable
design voltage:          0 mV
model number:
serial number:           250
battery type:
OEM info:
archon BAT0 #

weird values... maybe something's missing here... or is this something else
other than battery read values?

archon BAT0 # cat state
present:                 yes
capacity state:          ok
charging state:          charged
present rate:            0 mA
remaining capacity:      3667 mAh
present voltage:         16753 mV
archon BAT0 #

this makes sense. It's ok.

archon SBS0 # pwd
/proc/acpi/sbs/SBS0
archon SBS0 # cat info
design voltage:          0 mV
design capacity:         80 mAh
full charge capacity:    10 mAh
remain capacity alarm:   5 mAh
remain time alarm:       0 mAh
charging current:        0 mA
charging voltage:        18 mV
charge reporting error:  0%
specification info:      Smart Battery v4.4
manufacturer name:
manufacture date:        1980- 0- 0
serial number:           250
device name:
device chemistry:
archon SBS0 #

again, none of the values seem to be correct...

archon SBS0 # cat state
charging state:          charged
current:                 0 mA
average current          0 mA
voltage:                 16753 mV
temperature:             21.5 C
relative charge:         99%
absolute charge:         83%
remaining capacity:      3667 mAh
run time to empty:       not discharging
average time to empty:   not discharging
average time to full:    not charging
archon SBS0 #

this is also ok.

I haven't had the time to read the code, but it seems that something's missing
in the info files. could you check on that?

also, it's misbehaving when there is no battery present:

archon SBS0 # pwd
/proc/acpi/sbs/SBS0
archon SBS0 # cat state
cat: state: Operation not permitted
archon SBS0 #

archon BAT0 # pwd
/proc/acpi/battery/BAT0
archon BAT0 # cat info
present:                 yes
design capacity:         80 mAh
last full capacity:      10 mAh
battery technology:      rechargeable
design voltage:          0 mV
model number:
serial number:           250
battery type:
OEM info:
archon BAT0 #

archon BAT0 # cat state
cat: state: Operation not permitted
archon BAT0 #

Thanks for the work with the driver. It's damn good work!

Also, the other driver from Bruno Ducrot should be out soon, so I predict we'll
have some work with both. maybe some kind of merge would be possible, best parts
of one and best parts of the other... just a comment.

regards,
pedro venda.
- --

Pedro João Lopes Venda
email: pjvenda-pQd4kjVL+REh2FBCd0jGRA@public.gmane.org
http://arrakis.dhis.org
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.2.6 (GNU/Linux)
Comment: Using GnuPG with Thunderbird - http://enigmail.mozdev.org

iD8DBQFB6F/feRy7HWZxjWERAjJFAJ9vQ3jaaE1L30YSjcZPRmA5jK+EzACePq5h
kHp9LlMv5oChkpY52jUWSGI=
=HCrZ
-----END PGP SIGNATURE-----


-------------------------------------------------------
The SF.Net email is sponsored by: Beat the post-holiday blues
Get a FREE limited edition SourceForge.net t-shirt from ThinkGeek.
It's fun and FREE -- well, almost....http://www.thinkgeek.com/sfshirt