From mboxrd@z Thu Jan 1 00:00:00 1970 From: =?ISO-8859-1?Q?Fran=E7ois_Valenduc?= Subject: Re: patched sms-cm acpi/ec.c to 2.6.11.5 Date: Mon, 21 Mar 2005 22:59:04 +0100 Message-ID: <423F43A8.90005@tiscali.be> References: <423EF2EB.5030505@arrakis.dhis.org> Mime-Version: 1.0 Content-Type: text/plain; charset=ISO-8859-1; format=flowed Content-Transfer-Encoding: quoted-printable In-Reply-To: <423EF2EB.5030505-pQd4kjVL+REh2FBCd0jGRA@public.gmane.org> Sender: acpi-devel-admin-5NWGOfrQmneRv+LV9MX5uipxlwaOVQ5f@public.gmane.org Errors-To: acpi-devel-admin-5NWGOfrQmneRv+LV9MX5uipxlwaOVQ5f@public.gmane.org List-Unsubscribe: , List-Post: List-Help: List-Subscribe: , List-Archive: To: Pedro Venda , acpi-devel-5NWGOfrQmneRv+LV9MX5uipxlwaOVQ5f@public.gmane.org List-Id: linux-acpi@vger.kernel.org I tried this patch and it doens't work very well. First, the kernel=20 takes a very long time to boot. I have to wait more than 30 seconds to=20 see the first kernel messages appear. Second, it takes also a long time=20 to load the ac and battery modules. It correctly detects the AC status=20 and the presence of the battery. Nevertheless, I can never get the=20 battery charge level (or maybe after a too long time and I didn't wait=20 enough). Finally, it causes problem with USB support (or maybe only with=20 the usblp module). Here below is an extract of dmesg showing the problem: drivers/usb/class/usblp.c: usblp0: USB Bidirectional printer dev 2 if 1=20 alt 0 proto 2 vid 0x03F0 pi d 0x3F11 usbcore: registered new driver usblp drivers/usb/class/usblp.c: v0.13: USB Printer Device Class driver usb 2-2: USB disconnect, address 2 drivers/usb/class/usblp.c: usblp0: removed usb 2-2: new full speed USB device using uhci_hcd and address 3 usb 2-2: khubd timed out on ep0in usb 2-2: unable to read config index 0 descriptor/start usb 2-2: can't read configurations, error -110 usb 2-2: new full speed USB device using uhci_hcd and address 4 drivers/usb/class/usblp.c: usblp0: USB Bidirectional printer dev 4 if 1=20 alt 0 proto 2 vid 0x03F0 pi d 0x3F11 So it seems there is still some work needed to get sbs-cm patch working=20 correctly. Fran=E7ois Valenduc Pedro Venda a =E9crit : > hi everyone, > > Since I'm still interested into using the sbs-cm DSDT patch from rich=20 > townsend > and the most recent release is for 2.6.10, refusing to apply to=20 > 2.6.11.X, I > changed it. > > here it is. rich: could you please take a look and, if it is ok, could=20 > you > just update your release? > > thanks for your time. [patch is also attached] > > regards, > pedro venda. > > > ------------------------------------------------------- SF email is sponsored by - The IT Product Guide Read honest & candid reviews on hundreds of IT Products from real users. Discover which products truly live up to the hype. Start reading now. http://ads.osdn.com/?ad_id=3D6595&alloc_id=3D14396&op=3Dclick