From mboxrd@z Thu Jan 1 00:00:00 1970 From: Andreas Zoglauer Subject: Re: Fw: 2.6.11.4: ACPI, IRQ 11 disabled, Ethernet/USB stops working Date: Thu, 24 Mar 2005 12:09:39 -0800 Message-ID: <42431E83.1090009@zogi.de> References: <20050323023629.5723f9bc.akpm@osdl.org> <1111689690.24547.31.camel@eeyore> Mime-Version: 1.0 Content-Type: text/plain; charset=ISO-8859-1; format=flowed Content-Transfer-Encoding: 7bit In-Reply-To: <1111689690.24547.31.camel@eeyore> Sender: acpi-devel-admin-5NWGOfrQmneRv+LV9MX5uipxlwaOVQ5f@public.gmane.org Errors-To: acpi-devel-admin-5NWGOfrQmneRv+LV9MX5uipxlwaOVQ5f@public.gmane.org List-Unsubscribe: , List-Post: List-Help: List-Subscribe: , List-Archive: To: Bjorn Helgaas Cc: Andrew Morton , ACPI List , kernel-UNdit3cmHfQ@public.gmane.org List-Id: linux-acpi@vger.kernel.org Hi Bjorn, The patch didn't do the job... The > irq 11: nobody cared! is still in the boot message and ethernet and USB stop working... Looking at my lspci, I probably have no VIA chips in my Notebook. More ideas? Thanks, Andreas lspci: 0000:00:00.0 Host bridge: Intel Corp. Mobile Memory Controller Hub (rev 03) 0000:00:02.0 VGA compatible controller: Intel Corp. Mobile Graphics Controller (rev 03) 0000:00:02.1 Display controller: Intel Corp. Mobile Graphics Controller (rev 03) 0000:00:1c.0 PCI bridge: Intel Corp. 82801FB/FBM/FR/FW/FRW (ICH6 Family) PCI Express Port 1 (rev 04) 0000:00:1c.1 PCI bridge: Intel Corp. 82801FB/FBM/FR/FW/FRW (ICH6 Family) PCI Express Port 2 (rev 04) 0000:00:1d.0 USB Controller: Intel Corp. 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #1 (rev 04) 0000:00:1d.1 USB Controller: Intel Corp. 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #2 (rev 04) 0000:00:1d.2 USB Controller: Intel Corp. 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #3 (rev 04) 0000:00:1d.3 USB Controller: Intel Corp. 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #4 (rev 04) 0000:00:1d.7 USB Controller: Intel Corp. 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB2 EHCI Controller (rev 04) 0000:00:1e.0 PCI bridge: Intel Corp. 82801 PCI Bridge (rev d4) 0000:00:1e.2 Multimedia audio controller: Intel Corp. 82801FB/FBM/FR/FW/FRW (ICH6 Family) AC'97 Audio Controller (rev 04) 0000:00:1e.3 Modem: Intel Corp. 82801FB/FBM/FR/FW/FRW (ICH6 Family) AC'97 Modem Controller (rev 04) 0000:00:1f.0 ISA bridge: Intel Corp. 82801FBM (ICH6M) LPC Interface Bridge (rev 04) 0000:00:1f.2 IDE interface: Intel Corp. 82801FBM (ICH6M) SATA Controller (rev 04) 0000:01:00.0 Ethernet controller: Marvell Technology Group Ltd.: Unknown device 4351 (rev 10) 0000:05:04.0 Network controller: Intel Corp. PRO/Wireless 2200BG (rev 05) 0000:05:06.0 CardBus bridge: Texas Instruments: Unknown device 8031 0000:05:06.2 FireWire (IEEE 1394): Texas Instruments: Unknown device 8032 0000:05:06.3 Unknown mass storage controller: Texas Instruments: Unknown device 8033 0000:05:06.4 Class 0805: Texas Instruments: Unknown device 8034 boot.msg: Inspecting /boot/System.map-2.6.11.4 Loaded 24627 symbols from /boot/System.map-2.6.11.4. Symbols match kernel version 2.6.11. No module symbols loaded - kernel modules not enabled. klogd 1.4.1, log source = ksyslog started. <4>Linux version 2.6.11.4 (root@thetis) (gcc-Version 3.3.4 (pre 3.3.5 20040809)) #1 Thu Mar 24 11:39:53 PST 2005 <6>BIOS-provided physical RAM map: <4> BIOS-e820: 0000000000000000 - 000000000009fc00 (usable) <4> BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved) <4> BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved) <4> BIOS-e820: 0000000000100000 - 000000001f7dfffc (usable) <4> BIOS-e820: 000000001f7dfffc - 000000001f7fffc0 (ACPI data) <4> BIOS-e820: 000000001f7fffc0 - 000000001f800000 (ACPI NVS) <4> BIOS-e820: 00000000fff00000 - 0000000100000000 (reserved) <5>0MB HIGHMEM available. <5>503MB LOWMEM available. <7>On node 0 totalpages: 128991 <7> DMA zone: 4096 pages, LIFO batch:1 <7> Normal zone: 124895 pages, LIFO batch:16 <7> HighMem zone: 0 pages, LIFO batch:1 <6>DMI 2.3 present. <7>ACPI: RSDP (v000 INSYDE ) @ 0x000e5010 <7>ACPI: RSDT (v001 INSYDE RSDT_000 0x00000100 ABCD 0x00010200) @ 0x1f7f8769 <7>ACPI: FADT (v001 INSYDE FACP_000 0x00000100 0000 0x00010200) @ 0x1f7ffb30 <7>ACPI: MCFG (v001 INSYDE MCFG_000 0x30303030 0000 0x30303030) @ 0x1f7ffbc0 <7>ACPI: SSDT (v001 PmRef Cpu0Ist 0x00003000 INTL 0x20030522) @ 0x1f7f8975 <7>ACPI: SSDT (v001 PmRef Cpu0Cst 0x00003001 INTL 0x20030522) @ 0x1f7f879d <7>ACPI: DSDT (v001 TOSINV SONOMA 0x00001004 INTL 0x02002036) @ 0x00000000 <6>ACPI: PM-Timer IO Port: 0x1008 <4>Allocating PCI resources starting at 1f800000 (gap: 1f800000:e0700000) <4>Built 1 zonelists <4>Kernel command line: root=/dev/sda7 vga=791 selinux=0 resume2=/dev/sda6 desktop elevator=as splash=silent <4>Local APIC disabled by BIOS -- you can enable it with "lapic" <7>mapped APIC to ffffd000 (013f2000) <6>Initializing CPU#0 <4>PID hash table entries: 2048 (order: 11, 32768 bytes) <4>Detected 1596.579 MHz processor. <6>Using pmtmr for high-res timesource <4>Console: colour dummy device 80x25 <4>Dentry cache hash table entries: 65536 (order: 6, 262144 bytes) <4>Inode-cache hash table entries: 32768 (order: 5, 131072 bytes) <6>Memory: 506032k/515964k available (2358k kernel code, 9380k reserved, 778k data, 232k init, 0k highmem) <4>Checking if this processor honours the WP bit even in supervisor mode... Ok. <7>Calibrating delay loop... 3153.92 BogoMIPS (lpj=1576960) <6>Security Framework v1.0.0 initialized <6>SELinux: Disabled at boot. <4>Mount-cache hash table entries: 512 (order: 0, 4096 bytes) <7>CPU: After generic identify, caps: afe9f9ff 00000000 00000000 00000000 00000180 00000000 00000000 <7>CPU: After vendor identify, caps: afe9f9ff 00000000 00000000 00000000 00000180 00000000 00000000 <6>CPU: L1 I cache: 32K, L1 D cache: 32K <6>CPU: L2 cache: 2048K <7>CPU: After all inits, caps: afe9f9ff 00000000 00000000 00000040 00000180 00000000 00000000 <6>Intel machine check architecture supported. <6>Intel machine check reporting enabled on CPU#0. <4>CPU: Intel(R) Pentium(R) M processor 1.60GHz stepping 08 <6>Enabling fast FPU save and restore... done. <6>Enabling unmasked SIMD FPU exception support... done. <6>Checking 'hlt' instruction... OK. <4> tbxface-0118 [02] acpi_load_tables : ACPI Tables successfully acquired <4>Parsing all Control Methods:................................................................................................................................................................................................................................................... <4>Table [DSDT](id F006) - 889 Objects with 69 Devices 243 Methods 29 Regions <4>Parsing all Control Methods:... <4>Table [SSDT](id F003) - 5 Objects with 0 Devices 3 Methods 0 Regions <4>Parsing all Control Methods:. <4>Table [SSDT](id F004) - 1 Objects with 0 Devices 1 Methods 0 Regions <4>ACPI Namespace successfully loaded at root c048bf00 <4>ACPI: setting ELCR to 0200 (from 0c20) <4>evxfevnt-0094 [03] acpi_enable : Transition to ACPI mode successful <6>checking if image is initramfs...it isn't (no cpio magic); looks like an initrd <6>Freeing initrd memory: 1144k freed <6>NET: Registered protocol family 16 <6>PCI: PCI BIOS revision 2.10 entry at 0xea7e4, last bus=5 <6>PCI: Using MMCONFIG <6>mtrr: v2.0 (20020519) <6>ACPI: Subsystem revision 20050211 <4> exutils-0216 [21] ex_acquire_global_lock: Could not acquire Global Lock, AE_NO_GLOBAL_LOCK <4> exutils-0216 [21] ex_acquire_global_lock: Could not acquire Global Lock, AE_NO_GLOBAL_LOCK <4> exutils-0216 [21] ex_acquire_global_lock: Could not acquire Global Lock, AE_NO_GLOBAL_LOCK <4> exutils-0216 [21] ex_acquire_global_lock: Could not acquire Global Lock, AE_NO_GLOBAL_LOCK <4> exutils-0216 [21] ex_acquire_global_lock: Could not acquire Global Lock, AE_NO_GLOBAL_LOCK <4>evgpeblk-0979 [06] ev_create_gpe_block : GPE 00 to 1F [_GPE] 4 regs on int 0x9 <4>evgpeblk-0987 [06] ev_create_gpe_block : Found 8 Wake, Enabled 4 Runtime GPEs in this block <4>Completing Region/Field/Buffer/Package initialization:......................................................................................... <4>Initialized 28/29 Regions 0/0 Fields 39/39 Buffers 22/34 Packages (904 nodes) <4>Executing all Device _STA and_INI methods:........................................................................... <4>75 Devices found containing: 75 _STA, 1 _INI methods <6>ACPI: Interpreter enabled <6>ACPI: Using PIC for interrupt routing <6>ACPI: PCI Root Bridge [PCI0] (00:00) <4>PCI: Probing PCI hardware (bus 00) <6>PCI: Ignoring BAR0-3 of IDE controller 0000:00:1f.2 <6>PCI: Transparent bridge - 0000:00:1e.0 <7>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] <7>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT] <7>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP02._PRT] <7>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIB._PRT] <4>ACPI: PCI Interrupt Link [LNKA] (IRQs 5 *11) <4>ACPI: PCI Interrupt Link [LNKB] (IRQs 5 *10 11) <4>ACPI: PCI Interrupt Link [LNKC] (IRQs 5 *11) <4>ACPI: PCI Interrupt Link [LNKD] (IRQs 5 10 *11) <4>ACPI: PCI Interrupt Link [LNKE] (IRQs *5 11) <4>ACPI: PCI Interrupt Link [LNKF] (IRQs 5 10) *0, disabled. <4>ACPI: PCI Interrupt Link [LNKG] (IRQs 6) *11 <4>ACPI: PCI Interrupt Link [LNKH] (IRQs 5 10) *11 <6>ACPI: Embedded Controller [EC0] (gpe 16) <6>ACPI: Power Resource [PFA1] (off) <6>Linux Plug and Play Support v0.97 (c) Adam Belay <6>pnp: PnP ACPI init <6>pnp: PnP ACPI: found 9 devices <6>PCI: Using ACPI for IRQ routing <6>** PCI interrupts are no longer routed automatically. If this <6>** causes a device to stop working, it is probably because the <6>** driver failed to call pci_enable_device(). As a temporary <6>** workaround, the "pci=routeirq" argument restores the old <6>** behavior. If this argument makes the device work again, <6>** please email the output of "lspci" to bjorn.helgaas-VXdhtT5mjnY@public.gmane.org <6>** so I can fix the driver. <3>PCI: Cannot allocate resource region 0 of device 0000:05:06.0 <4>TC classifier action (bugs to netdev-VZNHf3L845pBDgjK7y7TUQ@public.gmane.org cc hadi-fAAogVwAN2Kw5LPnMra/2Q@public.gmane.org) <6>apm: BIOS not found. <6>audit: initializing netlink socket (disabled) <3>audit(1111665062.963:0): initialized <4>Total HugeTLB memory allocated, 0 <5>VFS: Disk quotas dquot_6.5.1 <4>Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) <6>Initializing Cryptographic API <4>ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 10 <4>PCI: setting IRQ 10 as level-triggered <6>ACPI: PCI interrupt 0000:00:1c.0[A] -> GSI 10 (level, low) -> IRQ 10 <7>PCI: Setting latency timer of device 0000:00:1c.0 to 64 <4>assign_interrupt_mode Found MSI capability <7>Allocate Port Service[pcie00] <7>Allocate Port Service[pcie02] <7>Allocate Port Service[pcie03] <4>ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 11 <4>PCI: setting IRQ 11 as level-triggered <6>ACPI: PCI interrupt 0000:00:1c.1[B] -> GSI 11 (level, low) -> IRQ 11 <7>PCI: Setting latency timer of device 0000:00:1c.1 to 64 <4>assign_interrupt_mode Found MSI capability <7>Allocate Port Service[pcie00] <7>Allocate Port Service[pcie02] <7>Allocate Port Service[pcie03] <6>vesafb: framebuffer at 0xa0000000, mapped to 0xe0080000, using 3072k, total 7872k <6>vesafb: mode is 1024x768x16, linelength=2048, pages=4 <6>vesafb: protected mode interface info at 00ff:44f0 <6>vesafb: scrolling: redraw <6>vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0 <4>Console: switching to colour frame buffer device 128x48 <6>fb0: VESA VGA frame buffer device <6>isapnp: Scanning for PnP cards... <6>isapnp: No Plug & Play device found <6>Real Time Clock Driver v1.12 <6>i8042.c: Detected active multiplexing controller, rev 1.1. <6>serio: i8042 AUX0 port at 0x60,0x64 irq 12 <6>serio: i8042 AUX1 port at 0x60,0x64 irq 12 <6>serio: i8042 AUX2 port at 0x60,0x64 irq 12 <6>serio: i8042 AUX3 port at 0x60,0x64 irq 12 <6>serio: i8042 KBD port at 0x60,0x64 irq 1 <6>Serial: 8250/16550 driver $Revision: 1.90 $ 48 ports, IRQ sharing enabled <4>ACPI: PCI Interrupt Link [LNKE] enabled at IRQ 5 <4>PCI: setting IRQ 5 as level-triggered <6>ACPI: PCI interrupt 0000:00:1e.3[B] -> GSI 5 (level, low) -> IRQ 5 <6>io scheduler noop registered <6>io scheduler anticipatory registered <6>io scheduler deadline registered <6>io scheduler cfq registered <4>floppy0: no floppy controllers found <4>RAMDISK driver initialized: 16 RAM disks of 64000K size 1024 blocksize <6>loop: loaded (max 8 devices) <6>Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 <6>ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx <3>ide0: I/O resource 0x1F0-0x1F7 not free. <3>ide0: ports already in use, skipping probe <7>Probing IDE interface ide1... <4>hdc: MATSHITADVD-RAM UJ-830S, ATAPI CD/DVD-ROM drive <7>Probing IDE interface ide2... <7>Probing IDE interface ide3... <7>Probing IDE interface ide4... <7>Probing IDE interface ide5... <4>ide1 at 0x170-0x177,0x376 on irq 15 <4>ide-floppy driver 0.99.newide <6>mice: PS/2 mouse device common for all mice <6>input: AT Translated Set 2 keyboard on isa0060/serio0 <6>Synaptics Touchpad, model: 1 <6> Firmware: 5.9 <6> 180 degree mounted touchpad <6> Sensor: 37 <6> new absolute packet format <6> Touchpad has extended capability bits <6> -> multifinger detection <6> -> palm detection <6>input: SynPS/2 Synaptics TouchPad on isa0060/serio1 <6>input: PC Speaker <6>md: md driver 0.90.1 MAX_MD_DEVS=256, MD_SB_DISKS=27 <6>NET: Registered protocol family 2 <6>IP: routing cache hash table of 4096 buckets, 32Kbytes <4>TCP established hash table entries: 16384 (order: 5, 131072 bytes) <4>TCP bind hash table entries: 16384 (order: 4, 65536 bytes) <6>TCP: Hash tables configured (established 16384 bind 16384) <6>NET: Registered protocol family 1 <6>NET: Registered protocol family 8 <6>NET: Registered protocol family 20 <7>PM: Reading swsusp image. <7>PM: Resume from disk failed. <4>ACPI wakeup devices: <4>LID0 RP01 RP02 RP03 RP04 USB1 USB2 USB3 USB4 USB7 MODM PS2K <6>ACPI: (supports S0 S3 S4 S5) <6>md: Autodetecting RAID arrays. <6>md: autorun ... <6>md: ... autorun DONE. <5>RAMDISK: Compressed image found at block 0 <4>VFS: Mounted root (ext2 filesystem). <5>SCSI subsystem initialized <7>libata version 1.10 loaded. <7>ata_piix version 1.03 <4>ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 11 <6>ACPI: PCI interrupt 0000:00:1f.2[B] -> GSI 11 (level, low) -> IRQ 11 <4>ata: 0x170 IDE port busy <7>PCI: Setting latency timer of device 0000:00:1f.2 to 64 <6>ata1: SATA max UDMA/133 cmd 0x1F0 ctl 0x3F6 bmdma 0x1100 irq 14 <7>ata1: dev 0 cfg 49:2b00 82:346b 83:5b29 84:4003 85:3468 86:1a09 87:4003 88:203f <6>ata1: dev 0 ATA, max UDMA/100, 156301488 sectors: <6>ata1: dev 0 configured for UDMA/100 <6>scsi0 : ata_piix <5> Vendor: ATA Model: FUJITSU MHT2080A Rev: 0022 <5> Type: Direct-Access ANSI SCSI revision: 05 <5>SCSI device sda: 156301488 512-byte hdwr sectors (80026 MB) <5>SCSI device sda: drive cache: write back <5>SCSI device sda: 156301488 512-byte hdwr sectors (80026 MB) <5>SCSI device sda: drive cache: write back <6> sda: sda1 sda2 < sda5 sda6 sda7 > sda4 <5>Attached scsi disk sda at scsi0, channel 0, id 0, lun 0 <5>ReiserFS: sda7: found reiserfs format "3.6" with standard journal <5>ReiserFS: sda7: using ordered data mode <5>ReiserFS: sda7: journal params: device sda7, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30 <5>ReiserFS: sda7: checking transaction log (sda7) <5>ReiserFS: sda7: Using r5 hash to sort names <4>VFS: Mounted root (reiserfs filesystem) readonly. <5>Trying to move old root to /initrd ... failed <5>Unmounting old root <5>Trying to free ramdisk memory ... failed <6>Freeing unused kernel memory: 232k freed <4>lt_modem: module license 'Proprietary' taints kernel. <6>Loading Agere/Lucent WinModem Controller driver version 8.31 <3>agrserial - No device detected <6>usbcore: registered new driver usbfs <6>usbcore: registered new driver hub <6>ACPI: PCI interrupt 0000:01:00.0[A] -> GSI 11 (level, low) -> IRQ 11 <4>sk98lin: Network Device Driver v8.15.1.3 <4>(C)Copyright 1999-2005 Marvell(R). <6>ACPI: PCI interrupt 0000:01:00.0[A] -> GSI 11 (level, low) -> IRQ 11 <7>PCI: Setting latency timer of device 0000:01:00.0 to 64 <4>eth0: Marvell Yukon 88E8036 Fast Ethernet Controller <4> PrefPort:A RlmtMode:Check Link State <6>md: Autodetecting RAID arrays. <6>md: autorun ... <6>md: ... autorun DONE. <6>device-mapper: 4.4.0-ioctl (2005-01-12) initialised: dm-devel-H+wXaHxf7aLQT0dZR+AlfA@public.gmane.org <6>NTFS driver 2.1.22 [Flags: R/O MODULE]. <6>Linux agpgart interface v0.100 (c) Dave Jones <6>USB Universal Host Controller Interface driver v2.2 <4>ACPI: PCI Interrupt Link [LNKH] enabled at IRQ 10 <6>ACPI: PCI interrupt 0000:00:1d.0[A] -> GSI 10 (level, low) -> IRQ 10 <6>uhci_hcd 0000:00:1d.0: UHCI Host Controller <6>NTFS volume version 3.1. <7>PCI: Setting latency timer of device 0000:00:1d.0 to 64 <6>uhci_hcd 0000:00:1d.0: irq 10, io base 0x1200 <6>uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1 <6>hub 1-0:1.0: USB hub found <6>hub 1-0:1.0: 2 ports detected <6>ACPI: PCI interrupt 0000:00:1d.1[B] -> GSI 11 (level, low) -> IRQ 11 <6>uhci_hcd 0000:00:1d.1: UHCI Host Controller <7>PCI: Setting latency timer of device 0000:00:1d.1 to 64 <6>uhci_hcd 0000:00:1d.1: irq 11, io base 0x1220 <6>uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2 <6>hub 2-0:1.0: USB hub found <6>hub 2-0:1.0: 2 ports detected <4>ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 11 <6>ACPI: PCI interrupt 0000:00:1d.2[C] -> GSI 11 (level, low) -> IRQ 11 <6>uhci_hcd 0000:00:1d.2: UHCI Host Controller <7>PCI: Setting latency timer of device 0000:00:1d.2 to 64 <6>uhci_hcd 0000:00:1d.2: irq 11, io base 0x1240 <6>uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 3 <6>hub 3-0:1.0: USB hub found <6>hub 3-0:1.0: 2 ports detected <6>ACPI: PCI interrupt 0000:00:1d.3[D] -> GSI 11 (level, low) -> IRQ 11 <6>uhci_hcd 0000:00:1d.3: UHCI Host Controller <6>usb 1-1: new low speed USB device using uhci_hcd and address 2 <7>PCI: Setting latency timer of device 0000:00:1d.3 to 64 <6>uhci_hcd 0000:00:1d.3: irq 11, io base 0x1260 <6>uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 4 <6>hub 4-0:1.0: USB hub found <6>hub 4-0:1.0: 2 ports detected <6>agpgart: Detected an Intel 915GM Chipset. <6>agpgart: Maximum main memory to use for agp memory: 431M <6>agpgart: Detected 7932K stolen memory. <6>agpgart: AGP aperture is 256M @ 0xa0000000 <4>PCI: Enabling device 0000:00:1d.7 (0000 -> 0002) <6>ACPI: PCI interrupt 0000:00:1d.7[A] -> GSI 10 (level, low) -> IRQ 10 <6>ehci_hcd 0000:00:1d.7: EHCI Host Controller <7>PCI: Setting latency timer of device 0000:00:1d.7 to 64 <6>ehci_hcd 0000:00:1d.7: irq 10, pci mem 0xf4000000 <6>ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 5 <7>PCI: cache line size of 32 is not supported by device 0000:00:1d.7 <6>ehci_hcd 0000:00:1d.7: USB 2.0 initialized, EHCI 1.00, driver 10 Dec 2004 <6>hub 5-0:1.0: USB hub found <6>hub 5-0:1.0: 8 ports detected <6>usb 1-1: USB disconnect, address 2 <7>ieee1394: Initialized config rom entry `ip1394' <6>usb 1-1: new low speed USB device using uhci_hcd and address 3 <6>ohci1394: $Rev: 1223 $ Ben Collins <4>ACPI: PCI Interrupt Link [LNKG] enabled at IRQ 6 <4>PCI: setting IRQ 6 as level-triggered <6>ACPI: PCI interrupt 0000:05:06.2[C] -> GSI 6 (level, low) -> IRQ 6 <6>ohci1394: fw-host0: Remapped memory spaces reg 0xe0644000 <6>ohci1394: fw-host0: Soft reset finished <6>ohci1394: fw-host0: Iso contexts reg: 000000a8 implemented: 0000000f <6>ohci1394: fw-host0: 4 iso receive contexts available <6>ohci1394: fw-host0: Iso contexts reg: 00000098 implemented: 000000ff <6>ohci1394: fw-host0: 8 iso transmit contexts available <6>ohci1394: fw-host0: Receive DMA ctx=0 initialized <6>ohci1394: fw-host0: Receive DMA ctx=0 initialized <6>ohci1394: fw-host0: Transmit DMA ctx=0 initialized <6>ohci1394: fw-host0: Transmit DMA ctx=1 initialized <6>ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[6] MMIO=[b8000000-b80007ff] Max Packet=[2048] <7>ieee1394: CSR: setting expire to 98, HZ=1000 <3>irq 11: nobody cared! <4> [__report_bad_irq+36/144] __report_bad_irq+0x24/0x90 <4> [note_interrupt+123/160] note_interrupt+0x7b/0xa0 <4> [__do_IRQ+251/272] __do_IRQ+0xfb/0x110 <4> [do_IRQ+54/112] do_IRQ+0x36/0x70 <4> [common_interrupt+26/32] common_interrupt+0x1a/0x20 <4> [handle_IRQ_event+41/112] handle_IRQ_event+0x29/0x70 <4> [__do_IRQ+167/272] __do_IRQ+0xa7/0x110 <4> [do_IRQ+54/112] do_IRQ+0x36/0x70 <4> [common_interrupt+26/32] common_interrupt+0x1a/0x20 <4> [pg0+538611965/1068864512] set_phy_reg+0x5d/0xa0 [ohci1394] <4> [kmem_freepages+1/160] kmem_freepages+0x1/0xa0 <4> [pg0+538617216/1068864512] ohci_devctl+0x4c0/0x660 [ohci1394] <4> [pg0+537967380/1068864512] csr1212_fill_cache+0xd4/0x110 [ieee1394] <4> [pg0+537967910/1068864512] csr1212_generate_csr_image+0x1d6/0x210 [ieee1394] <4> [pg0+537924080/1068864512] hpsb_reset_bus+0x20/0x30 [ieee1394] <4> [worker_thread+386/544] worker_thread+0x182/0x220 <4> [activate_task+92/112] activate_task+0x5c/0x70 <4> [pg0+537934448/1068864512] delayed_reset_bus+0x0/0xc0 [ieee1394] <4> [default_wake_function+0/16] default_wake_function+0x0/0x10 <4> [__wake_up_common+55/112] __wake_up_common+0x37/0x70 <4> [default_wake_function+0/16] default_wake_function+0x0/0x10 <4> [worker_thread+0/544] worker_thread+0x0/0x220 <4> [kthread+150/224] kthread+0x96/0xe0 <4> [kthread+0/224] kthread+0x0/0xe0 <4> [kernel_thread_helper+5/24] kernel_thread_helper+0x5/0x18 <3>handlers: <3>[pg0+537513408/1068864512] (SkY2Isr+0x0/0x1f0 [sk98lin]) <3>[pg0+536503456/1068864512] (usb_hcd_irq+0x0/0x70 [usbcore]) <3>[pg0+536503456/1068864512] (usb_hcd_irq+0x0/0x70 [usbcore]) <3>[pg0+536503456/1068864512] (usb_hcd_irq+0x0/0x70 [usbcore]) <0>Disabling IRQ #11 <6>ohci1394: fw-host0: IntEvent: 00030010 <6>ohci1394: fw-host0: irq_handler: Bus reset requested <6>ohci1394: fw-host0: Cancel request received <6>ohci1394: fw-host0: Got RQPkt interrupt status=0x00008409 <6>ohci1394: fw-host0: SelfID interrupt received (phyid 0, root) <6>ohci1394: fw-host0: SelfID packet 0x807f8852 received <7>ieee1394: Including SelfID 0x52887f80 <6>ohci1394: fw-host0: SelfID for this node is 0x807f8852 <6>ohci1394: fw-host0: SelfID complete <6>ohci1394: fw-host0: PhyReqFilter=ffffffffffffffff <7>ieee1394: selfid_complete called with successful SelfID stage ... irm_id: 0xFFC0 node_id: 0xFFC0 <7>ieee1394: NodeMgr: Processing host reset for knodemgrd_0 <6>ohci1394: fw-host0: Single packet rcv'd <7>ohci1394: fw-host0: Got phy packet ctx=0 ... discarded <6>Linux Kernel Card Services <6> options: [pci] [cardbus] [pm] <6>ACPI: PCI interrupt 0000:05:06.0[A] -> GSI 11 (level, low) -> IRQ 11 <6>Yenta: CardBus bridge found at 0000:05:06.0 [1179:ff10] <6>Yenta: ISA IRQ mask 0x0098, PCI irq 11 <6>Socket status: 30000810 <7>ieee1394: send packet local: ffc00140 ffc0ffff f0000400 <7>ieee1394: received packet: ffc00140 ffc0ffff f0000400 <7>ieee1394: send packet local: ffc00160 ffc00000 00000000 1de30404 <7>ieee1394: received packet: ffc00160 ffc00000 00000000 1de30404 <7>ieee1394: send packet local: ffc00540 ffc0ffff f0000404 <7>ieee1394: received packet: ffc00540 ffc0ffff f0000404 <7>ieee1394: send packet local: ffc00560 ffc00000 00000000 34393331 <7>ieee1394: received packet: ffc00560 ffc00000 00000000 34393331 <7>ieee1394: send packet local: ffc00940 ffc0ffff f0000408 <7>ieee1394: received packet: ffc00940 ffc0ffff f0000408 <7>ieee1394: send packet local: ffc00960 ffc00000 00000000 32a264e0 <7>ieee1394: received packet: ffc00960 ffc00000 00000000 32a264e0 <7>ieee1394: send packet local: ffc00d40 ffc0ffff f000040c <7>ieee1394: received packet: ffc00d40 ffc0ffff f000040c <7>ieee1394: send packet local: ffc00d60 ffc00000 00000000 a00d0800 <7>ieee1394: received packet: ffc00d60 ffc00000 00000000 a00d0800 <7>ieee1394: send packet local: ffc01140 ffc0ffff f0000410 <7>ieee1394: received packet: ffc01140 ffc0ffff f0000410 <7>ieee1394: send packet local: ffc01160 ffc00000 00000000 51a8bcd1 <7>ieee1394: received packet: ffc01160 ffc00000 00000000 51a8bcd1 <7>ieee1394: send packet local: ffc01550 ffc0ffff f0000400 04000000 <7>ieee1394: received packet: ffc01550 ffc0ffff f0000400 04000000 <7>ieee1394: send packet local: ffc01570 ffc00000 00000000 04000000 <7>ieee1394: received packet: ffc01570 ffc00000 00000000 04000000 <7>ieee1394: NodeMgr: raw=0xe064a232 irmc=1 cmc=1 isc=1 bmc=0 pmc=0 cyc_clk_acc=100 max_rec=2048 max_rom=1024 gen=3 lspd=2 <7>ieee1394: Host added: ID:BUS[0-00:1023] GUID[00080da0d1bca851] <7>ieee1394: send packet 100: ffff0100 ffc0ffff f0000234 1f0000c0 <6>ohci1394: fw-host0: Inserting packet for node 0-63:1023, tlabel=0, tcode=0x0, speed=0 <6>ohci1394: fw-host0: Starting transmit DMA ctx=0 <6>ohci1394: fw-host0: IntEvent: 00000001 <6>ohci1394: fw-host0: Got reqTxComplete interrupt status=0x00008011 <6>ohci1394: fw-host0: Packet sent to node 63 tcode=0x0 tLabel=0x00 ack=0x11 spd=0 data=0x1F0000C0 ctx=0 Kernel logging (ksyslog) stopped. Kernel log daemon terminating. Boot logging started on /dev/tty1(/dev/console) at Thu Mar 24 11:51:52 2005 Master Resource Control: previous runlevel: N, switching to runlevel: 5 start services (random pcmcia isdn SuSEfirewall2_init) Initializing random number generatordone Starting PCMCIA startproc: execve (/sbin/cardmgr) [ /sbin/cardmgr ], [ resume2=/dev/sda6 CONSOLE=/dev/console TERM=linux SHELL=/bin/sh INIT_VERSION=sysvinit-2.85 REDIRECT=/dev/tty1 COLUMNS=128 PATH=/usr/local/sbin:/sbin:/bin:/usr/sbin:/usr/bin vga=791 RUNLEVEL=5 PWD=/ SPLASHCFG= elevator=as PREVLEVEL=N LINES=48 HOME=/ SHLVL=2 splash=silent SPLASH=no _=/sbin/startproc DAEMON=/sbin/cardmgr ] cardmgr[5136]: socket 0: ATA/IDE Fixed Disk done Starting Firewall Initialization (phase 1 of 3) cardmgr[5136]: executing: 'modprobe ide-cs 2>&1' cardmgr[5136]: + FATAL: Module ide_cs not found. cardmgr[5136]: modprobe exited with status 1 cardmgr[5136]: module /lib/modules/2.6.11.4/pcmcia/ide-cs.o not available cardmgr[5136]: bind 'ide-cs' to socket 0 failed: Invalid argument done exit status of (random pcmcia isdn SuSEfirewall2_init) is (0 0 0 0) start services (network) Setting up network interfaces: lo lo IP address: 127.0.0.1/8 done eth0 device: Marvell Technology Group Ltd.: Unknown device 4351 (rev 10) eth0 configuration: eth-id-00:a0:d1:bc:a8:51 eth0 IP address: 128.32.13.12/24 doneWaiting for mandatory devices: wlan-bus-pci-0000:05:04.0 19 18 17 15 14 13 12 11 10 8 7 6 5 4 3 2 0 wlan-bus-pci-0000:05:04.0 No interface found failed modem0 modem0 Startmode is 'manual' skippedSetting up service network . . . . . . . . . . . . . . . .failed exit status of (network) is (7) start services (syslog) Starting syslog servicesstartproc: execve (/sbin/syslogd) [ /sbin/syslogd -a /var/lib/ntp/dev/log ], [ resume2=/dev/sda6 CONSOLE=/dev/console TERM=linux SHELL=/bin/sh INIT_VERSION=sysvinit-2.85 REDIRECT=/dev/tty1 COLUMNS=128 PATH=/usr/local/sbin:/sbin:/bin:/usr/sbin:/usr/bin vga=791 RUNLEVEL=5 PWD=/ SPLASHCFG= elevator=as PREVLEVEL=N LINES=48 HOME=/ SHLVL=2 splash=silent SPLASH=no _=/sbin/startproc DAEMON=/sbin/syslogd ] startproc: execve (/sbin/klogd) [ /sbin/klogd -c 1 -2 -x ], [ resume2=/dev/sda6 CONSOLE=/dev/console TERM=linux SHELL=/bin/sh INIT_VERSION=sysvinit-2.85 REDIRECT=/dev/tty1 COLUMNS=128 PATH=/usr/local/sbin:/sbin:/bin:/usr/sbin:/usr/bin vga=791 RUNLEVEL=5 PWD=/ SPLASHCFG= elevator=as PREVLEVEL=N LINES=48 HOME=/ SHLVL=2 splash=silent SPLASH=no _=/sbin/startproc DAEMON=/sbin/klogd ] done Starting Firewall Initialization (phase 2 of 3) exit status of (syslog) is (0) start services (SuSEfirewall2_setup) SuSEfirewall2: Warning: ip6tables does not support state matching. Extended IPv6 support disabled. SuSEfirewall2: Firewall rules successfully set from /etc/sysconfig/SuSEfirewall2 done exit status of (SuSEfirewall2_setup) is (0) start services (splash_early resmgr portmap fnfxd) Starting resource managerstartproc: execve (/sbin/resmgrd) [ /sbin/resmgrd ], [ resume2=/dev/sda6 CONSOLE=/dev/console TERM=linux SHELL=/bin/sh INIT_VERSION=sysvinit-2.85 REDIRECT=/dev/tty1 COLUMNS=128 PATH=/usr/local/sbin:/sbin:/bin:/usr/sbin:/usr/bin vga=791 RUNLEVEL=5 PWD=/ SPLASHCFG= elevator=as PREVLEVEL=N LINES=48 HOME=/ SHLVL=2 splash=silent SPLASH=no _=/sbin/startproc DAEMON=/sbin/resmgrd ] done Starting RPC portmap daemonstartproc: execve (/sbin/portmap) [ /sbin/portmap ], [ resume2=/dev/sda6 CONSOLE=/dev/console TERM=linux SHELL=/bin/sh INIT_VERSION=sysvinit-2.85 REDIRECT=/dev/tty1 COLUMNS=128 PATH=/usr/local/sbin:/sbin:/bin:/usr/sbin:/usr/bin vga=791 RUNLEVEL=5 PWD=/ SPLASHCFG= elevator=as PREVLEVEL=N LINES=48 HOME=/ SHLVL=2 splash=silent SPLASH=no _=/sbin/startproc DAEMON=/sbin/portmap ] done Starting fnfxd ...()...missing /proc/acpi/toshibaskipped exit status of (splash_early resmgr portmap fnfxd) is (0 0 0 5) start services (nfsboot nfs) Starting nfsboot (sm-notify) done Importing Net File System (NFS)unused exit status of (nfsboot nfs) is (0 6) start services (sshd smpppd running-kernel fbset alsasound) Starting SSH daemonstartproc: execve (/usr/sbin/sshd) [ /usr/sbin/sshd -o PidFile=/var/run/sshd.init.pid ], [ resume2=/dev/sda6 CONSOLE=/dev/console TERM=linux SHELL=/bin/sh INIT_VERSION=sysvinit-2.85 REDIRECT=/dev/tty1 COLUMNS=128 PATH=/usr/local/sbin:/sbin:/bin:/usr/sbin:/usr/bin vga=791 RUNLEVEL=5 PWD=/ SPLASHCFG= elevator=as PREVLEVEL=N LINES=48 HOME=/ SHLVL=2 splash=silent SPLASH=no _=/sbin/startproc DAEMON=/usr/sbin/sshd ] done startproc: execve (/usr/sbin/smpppd) [ /usr/sbin/smpppd ], [ resume2=/dev/sda6 CONSOLE=/dev/console TERM=linux SHELL=/bin/sh INIT_VERSION=sysvinit-2.85 REDIRECT=/dev/tty1 COLUMNS=128 PATH=/usr/local/sbin:/sbin:/bin:/usr/sbin:/usr/bin vga=791 RUNLEVEL=5 PWD=/ SPLASHCFG= elevator=as PREVLEVEL=N LINES=48 HOME=/ SHLVL=2 splash=silent SPLASH=no _=/sbin/startproc DAEMON=/usr/sbin/smpppd ] Starting SMPPPDdone Starting sound driver: intel8x0done Restoring the previous sound settingdone exit status of (sshd smpppd running-kernel fbset alsasound) is (0 0 0 0 0) start services (splash powersaved kbd cups) loading ACPI modules (ac battery button fan processor thermal ) done Starting powersaved (accessing ACPI events over acpid) startproc: execve (/usr/sbin/powersaved) [ /usr/sbin/powersaved -d -x /usr/lib/powersave/scripts -a resmgr -v 3 ], [ resume2=/dev/sda6 CONSOLE=/dev/console TERM=linux SHELL=/bin/sh INIT_VERSION=sysvinit-2.85 REDIRECT=/dev/tty1 COLUMNS=128 PATH=/usr/local/sbin:/sbin:/bin:/usr/sbin:/usr/bin vga=791 RUNLEVEL=5 PWD=/ SPLASHCFG= elevator=as PREVLEVEL=N LINES=48 HOME=/ SHLVL=2 splash=silent SPLASH=no _=/sbin/startproc DAEMON=/usr/sbin/powersaved ] done Loading keymap qwerty/us.map.gz doneLoading compose table winkeys shiftctrl latin1.adddone Start Unicode mode doneLoading console font lat9w-16.psfu -m trivial \033(K doneStarting cupsdstartproc: execve (/usr/sbin/cupsd) [ /usr/sbin/cupsd ], [ resume2=/dev/sda6 CONSOLE=/dev/console TERM=linux SHELL=/bin/sh INIT_VERSION=sysvinit-2.85 REDIRECT=/dev/tty1 COLUMNS=128 PATH=/usr/local/sbin:/sbin:/bin:/usr/sbin:/usr/bin vga=791 RUNLEVEL=5 PWD=/ SPLASHCFG= elevator=as PREVLEVEL=N LINES=48 HOME=/ SHLVL=2 splash=silent SPLASH=no _=/sbin/startproc DAEMON=/usr/sbin/cupsd ] done exit status of (splash powersaved kbd cups) is (5 0 0 0) start services (xdm postfix nscd hwscan) Starting service kdmstartproc: execve (/opt/kde3/bin/kdm) [ /opt/kde3/bin/kdm ], [ resume2=/dev/sda6 LC_MONETARY= CONSOLE=/dev/console TERM=linux SHELL=/bin/sh LC_NUMERIC= QTDIR=/usr/lib/qt3 LC_ALL= INIT_VERSION=sysvinit-2.85 KDEROOTHOME=/root/.kdm REDIRECT=/dev/tty1 COLUMNS=128 PATH=/usr/local/sbin:/sbin:/bin:/usr/sbin:/usr/bin LC_MESSAGES= vga=791 RUNLEVEL=5 LC_COLLATE= PWD=/ SPLASHCFG= LANG=de_DE.UTF-8 elevator=as PREVLEVEL=N LINES=48 HOME=/ SHLVL=2 XCURSOR_THEME=crystalwhite WINDOWMANAGER=/usr/X11R6/bin/kde LC_CTYPE=de_DE.UTF-8 splash=silent SPLASH=no LC_TIME= _=/sbin/startproc DAEMON=/opt/kde3/bin/kdm ] done Starting mail service (Postfix)done Starting Name Service Cache Daemonstartproc: execve (/usr/sbin/nscd) [ /usr/sbin/nscd ], [ resume2=/dev/sda6 CONSOLE=/dev/console TERM=linux SHELL=/bin/sh INIT_VERSION=sysvinit-2.85 REDIRECT=/dev/tty1 COLUMNS=128 PATH=/usr/local/sbin:/sbin:/bin:/usr/sbin:/usr/bin vga=791 RUNLEVEL=5 PWD=/ SPLASHCFG= elevator=as PREVLEVEL=N LINES=48 HOME=/ SHLVL=2 splash=silent SPLASH=no _=/sbin/startproc DAEMON=/usr/sbin/nscd ] done Starting hardware scan on bootexit status of (xdm postfix nscd hwscan) is (0 0 0 0) start services (smbfs cron) Mount SMB/ CIFS File Systems unused Starting CRON daemonstartproc: execve (/usr/sbin/cron) [ /usr/sbin/cron ], [ resume2=/dev/sda6 CONSOLE=/dev/console TERM=linux SHELL=/bin/sh INIT_VERSION=sysvinit-2.85 REDIRECT=/dev/tty1 COLUMNS=128 PATH=/usr/local/sbin:/sbin:/bin:/usr/sbin:/usr/bin vga=791 RUNLEVEL=5 PWD=/ SPLASHCFG= elevator=as PREVLEVEL=N LINES=48 HOME=/ SHLVL=2 splash=silent SPLASH=no _=/sbin/startproc DAEMON=/usr/sbin/cron ] done exit status of (smbfs cron) is (6 0) start services (SuSEfirewall2_final) Starting Firewall Initialization (phase 3 of 3) SuSEfirewall2: Warning: ip6tables does not support state matching. Extended IPv6 support disabled. SuSEfirewall2: Firewall rules successfully set from /etc/sysconfig/SuSEfirewall2 done Master Resource Control: runlevel 5 has been reached Failed services in runlevel 5: network Skipped services in runlevel 5: fnfxd nfs splash smbfs exit status of (SuSEfirewall2_final) is (0) killproc: kill(5074,3) ------------------------------------------------------- SF email is sponsored by - The IT Product Guide Read honest & candid reviews on hundreds of IT Products from real users. Discover which products truly live up to the hype. Start reading now. http://ads.osdn.com/?ad_id=6595&alloc_id=14396&op=click