Who else is writing to the EC? (Sony Vaio S3XP / PCG-6E1M)

Who else is writing to the EC? (Sony Vaio S3XP / PCG-6E1M)

[Felix Domke]

I'm a bit annoyed of the way the fan behaves in my Sony Vaio S3XP /
PCG-6E1M. Basically it's totally disabled until ~55°C, then switches on
and gets faster with higher temperature. However the system tends to
oscillate with a ~1min period, which is very annoying. I would rather
like the fan to be active at a slow speed all the time.

I noticed that there's no FAN-Resource in the DSDT.
There's no active cooling entry in the thermal zone, only a passive one
at 50°C. A quick overview over the thermal zone in the DSDT didn't show
any stuff where the fan is controlled.

Now there's a FAN0 entry in the embedded controller, at offset 0x93. I
made a small hacking by making a kernel module which directly writes to
the EC, and it works, i can set the fan speed between 0 and 0xFF.

However, about one second or so after i write the value, the fan speed
gets reset to the original value. reading from the EC show that the
value there gets reset, too.

I could not find any references inside the DSDT to the FAN0 resource in
the EC, i searched for both 0x93 (the offset) and "FAN0".

Even when i remove the "thermal" module, the fan behaves exactly like
before.

Who controls the fan when there's no thermal module active? Is there any
way i can override the fan control on this machine?

the dsdt: http://tmb.elitedvb.net/dsdt
and the disassembled version: http://tmb.elitedvb.net/dsdt.dsl

thanks,
Felix


-------------------------------------------------------
SF email is sponsored by - The IT Product Guide
Read honest & candid reviews on hundreds of IT Products from real users.
Discover which products truly live up to the hype. Start reading now.
http://ads.osdn.com/?ad_id=6595&alloc_id=14396&op=click