From mboxrd@z Thu Jan 1 00:00:00 1970 From: Jonas Oreland Subject: Re: Fw: ACPI, pm timer and ASUS a8v Date: Wed, 21 Sep 2005 09:44:26 +0200 Message-ID: <43310F5A.3060202@mysql.com> References: <59D45D057E9702469E5775CBB56411F1784DF0@pdsmsx406> Mime-Version: 1.0 Content-Type: multipart/mixed; boundary="------------000609040409060102010308" Return-path: In-Reply-To: <59D45D057E9702469E5775CBB56411F1784DF0@pdsmsx406> Sender: acpi-devel-admin-5NWGOfrQmneRv+LV9MX5uipxlwaOVQ5f@public.gmane.org Errors-To: acpi-devel-admin-5NWGOfrQmneRv+LV9MX5uipxlwaOVQ5f@public.gmane.org List-Unsubscribe: , List-Post: List-Help: List-Subscribe: , List-Archive: To: "Li, Shaohua" Cc: Andrew Morton , acpi-devel-5NWGOfrQmneRv+LV9MX5uipxlwaOVQ5f@public.gmane.org List-Id: linux-acpi@vger.kernel.org This is a multi-part message in MIME format. --------------000609040409060102010308 Content-Type: text/plain; charset=us-ascii Content-Transfer-Encoding: 7bit Li, Shaohua wrote: > Hi Jonas, > What the dmesg in the failure case? It seems the attched dmesg has the > correct pm-timer info. yes, this is the "my own hardcoded" version. attaching one from failure case. thank you for looking at it. /Jonas > > Thanks, > Shaohua > > >>-----Original Message----- >>From: acpi-devel-admin-5NWGOfrQmneRv+LV9MX5uipxlwaOVQ5f@public.gmane.org [mailto:acpi-devel- >>admin-5NWGOfrQmneRv+LV9MX5uipxlwaOVQ5f@public.gmane.org] On Behalf Of Andrew Morton >>Sent: Wednesday, September 21, 2005 2:18 PM >>To: acpi-devel-5NWGOfrQmneRv+LV9MX5uipxlwaOVQ5f@public.gmane.org >>Cc: Jonas Oreland >>Subject: [ACPI] Fw: ACPI, pm timer and ASUS a8v >> >> >>Jonas, you'll probably need to raise an ACPi report at > > bugzilla.kernel.org > >>for this one please. >> >>Begin forwarded message: >> >>Date: Tue, 20 Sep 2005 14:12:53 +0200 >>From: Jonas Oreland >>To: linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org >>Subject: ACPI, pm timer and ASUS a8v >> >> >>Hi, >> >>I running 2.6.12-gentoo-r10 >>I have a ASUS a8v motherboard with a AMD64 X2 >> >>This gives me problem with clock drift >>(see http://bugzilla.kernel.org/show_bug.cgi?id=5105) >> >>So I tried using notsc to force usage of pm timer. >> >>But! >>The the acpi code find the fadt->xpm_tmr_blk.address to 0 >>Making the code yet again fall back to PIT/TSC >> >>I booted my system can run >>perch> grep PM_ /proc/ioports >>0808-080b : PM_TMR >> >>And harded the address 0x808 into pmtmr_ioport >>This works. The system is using pmtmr and I get no clock drift >>(tested now for ~a day) >> >>But why do ACPI find 0 as pmtmr_ioport? >> >>/Jonas > > > --------------000609040409060102010308 Content-Type: text/plain; name="info" Content-Transfer-Encoding: 7bit Content-Disposition: inline; filename="info" Bootdata ok (command line is root=/dev/md1 notsc report_lost_ticks) Linux version 2.6.12-gentoo-r10 (root@perch) (gcc version 3.4.3 20041125 (Gentoo 3.4.3-r1, ssp-3.4.3-0, pie-8.7.7)) #2 SMP Tue Sep 20 09:01:00 CEST 2005 BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000009fc00 (usable) BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved) BIOS-e820: 00000000000e4000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 000000007ffb0000 (usable) BIOS-e820: 000000007ffb0000 - 000000007ffc0000 (ACPI data) BIOS-e820: 000000007ffc0000 - 000000007fff0000 (ACPI NVS) BIOS-e820: 000000007fff0000 - 0000000080000000 (reserved) BIOS-e820: 00000000ff780000 - 0000000100000000 (reserved) ACPI: RSDP (v002 ACPIAM ) @ 0x00000000000fa7c0 ACPI: XSDT (v001 A M I OEMXSDT 0x06000530 MSFT 0x00000097) @ 0x000000007ffb0100 ACPI: FADT (v003 A M I OEMFACP 0x06000530 MSFT 0x00000097) @ 0x000000007ffb0290 ACPI: MADT (v001 A M I OEMAPIC 0x06000530 MSFT 0x00000097) @ 0x000000007ffb0390 ACPI: OEMB (v001 A M I OEMBIOS 0x06000530 MSFT 0x00000097) @ 0x000000007ffc0040 ACPI: DSDT (v001 A0036 A0036001 0x00000001 MSFT 0x0100000d) @ 0x0000000000000000 On node 0 totalpages: 524208 DMA zone: 4096 pages, LIFO batch:1 Normal zone: 520112 pages, LIFO batch:31 HighMem zone: 0 pages, LIFO batch:1 ACPI: Local APIC address 0xfee00000 ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) Processor #0 15:3 APIC version 16 ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled) Processor #1 15:3 APIC version 16 ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) IOAPIC[0]: apic_id 2, version 3, address 0xfec00000, GSI 0-23 ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) ACPI: IRQ0 used by override. ACPI: IRQ2 used by override. ACPI: IRQ9 used by override. Setting APIC routing to flat Using ACPI (MADT) for SMP configuration information Allocating PCI resources starting at 80000000 (gap: 80000000:7f780000) Checking aperture... CPU 0: aperture @ e4000000 size 64 MB Built 1 zonelists Kernel command line: root=/dev/md1 notsc report_lost_ticks Initializing CPU#0 PID hash table entries: 4096 (order: 12, 131072 bytes) time.c: Using 1.193182 MHz PIT timer. time.c: Detected 2202.915 MHz processor. Console: colour VGA+ 80x25 Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes) Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes) Memory: 2056472k/2096832k available (2742k kernel code, 39756k reserved, 1155k data, 252k init) Calibrating delay loop... 4308.99 BogoMIPS (lpj=2154496) Mount-cache hash table entries: 256 CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) CPU: L2 Cache: 1024K (64 bytes/line) CPU 0(2) -> Node 0 -> Core 0 Using local APIC timer interrupts. Detected 12.516 MHz APIC timer. time.c: Lost 45 timer tick(s)! rip setup_boot_APIC_clock+0x112/0x120) Booting processor 1/1 rip 6000 rsp ffff81007ff51f58 Initializing CPU#1 Calibrating delay loop... 4390.91 BogoMIPS (lpj=2195456) CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) CPU: L2 Cache: 1024K (64 bytes/line) CPU 1(2) -> Node 0 -> Core 1 AMD Athlon(tm) 64 X2 Dual Core Processor 4400+ stepping 02 CPU 1: Syncing TSC to CPU 0. Brought up 2 CPUs CPU 1: synchronized TSC with CPU 0 (last diff 0 cycles, maxerr 573 cycles) time.c: Using PIT/TSC based timekeeping. testing NMI watchdog ... OK. CPU0 attaching sched-domain: domain 0: span 3 groups: 1 2 CPU1 attaching sched-domain: domain 0: span 3 groups: 2 1 NET: Registered protocol family 16 PCI: Using configuration type 1 mtrr: v2.0 (20020519) ACPI: Subsystem revision 20050309 ACPI: Interpreter enabled ACPI: Using IOAPIC for interrupt routing ACPI: PCI Root Bridge [PCI0] (0000:00) PCI: Probing PCI hardware (bus 00) Boot video device is 0000:01:00.0 ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 7 10 *11 14 15) ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 7 *10 11 14 15) ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 *5 7 10 11 14 15) ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 7 10 11 14 15) *0, disabled. ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 10 11 14 15) *0, disabled. ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 7 10 11 14 15) *0, disabled. ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 7 10 11 14 15) *0, disabled. ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 7 10 11 14 15) *0, disabled. SCSI subsystem initialized usbcore: registered new driver usbfs usbcore: registered new driver hub PCI: Using ACPI for IRQ routing PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report agpgart: Detected AGP bridge 0 agpgart: AGP aperture is 64M @ 0xe4000000 PCI-DMA: Disabling IOMMU. IA32 emulation $Id: sys_ia32.c,v 1.32 2002/03/24 13:02:28 ak Exp $ Total HugeTLB memory allocated, 0 inotify device minor=63 Installing knfsd (copyright (C) 1996 okir-pn4DOG8n3UYbFoVRYvo4fw@public.gmane.org). Real Time Clock Driver v1.12 Linux agpgart interface v0.101 (c) Dave Jones [drm] Initialized drm 1.0.0 20040925 ACPI: PCI Interrupt 0000:01:00.0[A] -> GSI 16 (level, low) -> IRQ 16 [drm] Initialized radeon 1.16.0 20050311 on minor 0: serio: i8042 AUX port at 0x60,0x64 irq 12 serio: i8042 KBD port at 0x60,0x64 irq 1 Serial: 8250/16550 driver $Revision: 1.90 $ 8 ports, IRQ sharing disabled ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A mice: PS/2 mouse device common for all mice io scheduler noop registered io scheduler deadline registered io scheduler cfq registered input: AT Translated Set 2 keyboard on isa0060/serio0 input: ImPS/2 Logitech Wheel Mouse on isa0060/serio1 floppy0: no floppy controllers found RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize loop: loaded (max 8 devices) ACPI: PCI Interrupt 0000:00:0a.0[A] -> GSI 17 (level, low) -> IRQ 17 skge addr 0xfb900000 irq 17 chip Yukon-Lite rev 9 skge eth0: addr 00:11:d8:a9:ca:61 forcedeth.c: Reverse Engineered nForce ethernet driver. Version 0.35. netconsole: not configured, aborting Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx VP_IDE: IDE controller at PCI slot 0000:00:0f.1 ACPI: PCI Interrupt 0000:00:0f.1[A] -> GSI 20 (level, low) -> IRQ 20 PCI: Via IRQ fixup for 0000:00:0f.1, from 255 to 4 VP_IDE: chipset revision 6 VP_IDE: not 100% native mode: will probe irqs later VP_IDE: VIA vt8237 (rev 00) IDE UDMA133 controller on pci0000:00:0f.1 ide0: BM-DMA at 0xfc00-0xfc07, BIOS settings: hda:DMA, hdb:pio ide1: BM-DMA at 0xfc08-0xfc0f, BIOS settings: hdc:pio, hdd:pio Probing IDE interface ide0... hda: _NEC DVD_RW ND-3540A, ATAPI CD/DVD-ROM drive ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 Probing IDE interface ide1... Probing IDE interface ide1... Probing IDE interface ide2... Probing IDE interface ide3... Probing IDE interface ide4... Probing IDE interface ide5... hda: ATAPI 48X DVD-ROM DVD-R CD-R/RW drive, 2048kB Cache, UDMA(33) Uniform CD-ROM driver Revision: 3.20 libata version 1.11 loaded. sata_via version 1.1 ACPI: PCI Interrupt 0000:00:0f.0[B] -> GSI 20 (level, low) -> IRQ 20 PCI: Via IRQ fixup for 0000:00:0f.0, from 10 to 4 sata_via(0000:00:0f.0): routed to hard irq line 4 ata1: SATA max UDMA/133 cmd 0xC000 ctl 0xB802 bmdma 0xA800 irq 20 ata2: SATA max UDMA/133 cmd 0xB400 ctl 0xB002 bmdma 0xA808 irq 20 ata1: dev 0 cfg 49:2f00 82:74eb 83:7f63 84:4003 85:74e9 86:3c43 87:4003 88:407f ata1: dev 0 ATA, max UDMA/133, 145226112 sectors: lba48 ata1: dev 0 configured for UDMA/133 scsi0 : sata_via ata2: dev 0 cfg 49:2f00 82:74eb 83:7f63 84:4003 85:74e9 86:3c43 87:4003 88:407f ata2: dev 0 ATA, max UDMA/133, 145226112 sectors: lba48 ata2: dev 0 configured for UDMA/133 scsi1 : sata_via Vendor: ATA Model: WDC WD740GD-00FL Rev: 33.0 Type: Direct-Access ANSI SCSI revision: 05 Vendor: ATA Model: WDC WD740GD-00FL Rev: 33.0 Type: Direct-Access ANSI SCSI revision: 05 SCSI device sda: 145226112 512-byte hdwr sectors (74356 MB) SCSI device sda: drive cache: write back SCSI device sda: 145226112 512-byte hdwr sectors (74356 MB) SCSI device sda: drive cache: write back sda: sda1 sda2 sda3 Attached scsi disk sda at scsi0, channel 0, id 0, lun 0 SCSI device sdb: 145226112 512-byte hdwr sectors (74356 MB) SCSI device sdb: drive cache: write back SCSI device sdb: 145226112 512-byte hdwr sectors (74356 MB) SCSI device sdb: drive cache: write back sdb: sdb1 sdb2 sdb3 Attached scsi disk sdb at scsi1, channel 0, id 0, lun 0 Fusion MPT base driver 3.01.20 Copyright (c) 1999-2004 LSI Logic Corporation Fusion MPT SCSI Host driver 3.01.20 ACPI: PCI Interrupt 0000:00:10.4[C] -> GSI 21 (level, low) -> IRQ 21 ehci_hcd 0000:00:10.4: EHCI Host Controller ehci_hcd 0000:00:10.4: new USB bus registered, assigned bus number 1 ehci_hcd 0000:00:10.4: irq 21, io mem 0xfbc00000 ehci_hcd 0000:00:10.4: USB 2.0 initialized, EHCI 1.00, driver 10 Dec 2004 hub 1-0:1.0: USB hub found hub 1-0:1.0: 8 ports detected ohci_hcd: 2004 Nov 08 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI) USB Universal Host Controller Interface driver v2.2 ACPI: PCI Interrupt 0000:00:10.0[A] -> GSI 21 (level, low) -> IRQ 21 PCI: Via IRQ fixup for 0000:00:10.0, from 11 to 5 uhci_hcd 0000:00:10.0: UHCI Host Controller uhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 2 uhci_hcd 0000:00:10.0: irq 21, io base 0x0000c400 hub 2-0:1.0: USB hub found hub 2-0:1.0: 2 ports detected ACPI: PCI Interrupt 0000:00:10.1[A] -> GSI 21 (level, low) -> IRQ 21 PCI: Via IRQ fixup for 0000:00:10.1, from 11 to 5 uhci_hcd 0000:00:10.1: UHCI Host Controller uhci_hcd 0000:00:10.1: new USB bus registered, assigned bus number 3 uhci_hcd 0000:00:10.1: irq 21, io base 0x0000c800 hub 3-0:1.0: USB hub found hub 3-0:1.0: 2 ports detected ACPI: PCI Interrupt 0000:00:10.2[B] -> GSI 21 (level, low) -> IRQ 21 PCI: Via IRQ fixup for 0000:00:10.2, from 10 to 5 uhci_hcd 0000:00:10.2: UHCI Host Controller uhci_hcd 0000:00:10.2: new USB bus registered, assigned bus number 4 uhci_hcd 0000:00:10.2: irq 21, io base 0x0000d000 hub 4-0:1.0: USB hub found hub 4-0:1.0: 2 ports detected ACPI: PCI Interrupt 0000:00:10.3[B] -> GSI 21 (level, low) -> IRQ 21 PCI: Via IRQ fixup for 0000:00:10.3, from 10 to 5 uhci_hcd 0000:00:10.3: UHCI Host Controller uhci_hcd 0000:00:10.3: new USB bus registered, assigned bus number 5 uhci_hcd 0000:00:10.3: irq 21, io base 0x0000d400 hub 5-0:1.0: USB hub found hub 5-0:1.0: 2 ports detected usbcore: registered new driver usblp drivers/usb/class/usblp.c: v0.13: USB Printer Device Class driver Initializing USB Mass Storage driver... usbcore: registered new driver usb-storage USB Mass Storage support registered. usbcore: registered new driver usbhid drivers/usb/input/hid-core.c: v2.01:USB HID core driver md: raid0 personality registered as nr 2 md: raid1 personality registered as nr 3 md: md driver 0.90.1 MAX_MD_DEVS=256, MD_SB_DISKS=27 Intel 810 + AC97 Audio, version 1.01, 08:42:09 Sep 20 2005 oprofile: using NMI interrupt. NET: Registered protocol family 2 IP: routing cache hash table of 8192 buckets, 128Kbytes TCP established hash table entries: 262144 (order: 10, 4194304 bytes) TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) TCP: Hash tables configured (established 262144 bind 65536) NET: Registered protocol family 1 NET: Registered protocol family 17 powernow-k8: Found 2 AMD Athlon 64 / Opteron processors (version 1.40.4) powernow-k8: MP systems not supported by PSB BIOS structure powernow-k8: MP systems not supported by PSB BIOS structure ACPI wakeup devices: PCI0 PS2K PS2M UAR2 UAR1 AC97 USB1 USB2 USB3 USB4 EHCI PWRB SLPB ACPI: (supports S0 S1 S3 S4 S5) md: Autodetecting RAID arrays. md: autorun ... md: considering sdb3 ... md: adding sdb3 ... md: sdb1 has different UUID to sdb3 md: adding sda3 ... md: sda1 has different UUID to sdb3 md: created md1 md: bind md: bind md: running: md1: setting max_sectors to 128, segment boundary to 32767 raid0: looking at sdb3 raid0: comparing sdb3(70541312) with sdb3(70541312) raid0: END raid0: ==> UNIQUE raid0: 1 zones raid0: looking at sda3 raid0: comparing sda3(70541312) with sdb3(70541312) raid0: EQUAL raid0: FINAL 1 zones raid0: done. raid0 : md_size is 141082624 blocks. raid0 : conf->hash_spacing is 141082624 blocks. raid0 : nb_zone is 1. raid0 : Allocating 8 bytes for hash. md: considering sdb1 ... md: adding sdb1 ... md: adding sda1 ... md: created md0 md: bind md: bind md: running: raid1: raid set md0 active with 2 out of 2 mirrors md: ... autorun DONE. ReiserFS: md1: found reiserfs format "3.6" with standard journal ReiserFS: md1: using ordered data mode ReiserFS: md1: journal params: device md1, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30 ReiserFS: md1: checking transaction log (md1) ReiserFS: md1: Using r5 hash to sort names VFS: Mounted root (reiserfs filesystem) readonly. Freeing unused kernel memory: 252k freed Adding 1959920k swap on /dev/sda2. Priority:-1 extents:1 Adding 1959920k swap on /dev/sdb2. Priority:-2 extents:1 kjournald starting. Commit interval 5 seconds EXT3 FS on md0, internal journal EXT3-fs: mounted filesystem with ordered data mode. skge eth0: enabling interface skge eth0: Link is up at 100 Mbps, full duplex, flow control tx and rx [drm:drm_unlock] *ERROR* Process 4283 using kernel context 0 time.c: Lost 1 timer tick(s)! rip default_idle+0x20/0x30) Losing some ticks... checking if CPU frequency changed. time.c: Lost 1 timer tick(s)! rip default_idle+0x20/0x30) time.c: Lost 1 timer tick(s)! rip default_idle+0x20/0x30) time.c: Lost 1 timer tick(s)! rip default_idle+0x20/0x30) ---- lspci 0000:00:00.0 Host bridge: VIA Technologies, Inc. K8T800Pro Host Bridge 0000:00:00.1 Host bridge: VIA Technologies, Inc. K8T800Pro Host Bridge 0000:00:00.2 Host bridge: VIA Technologies, Inc. K8T800Pro Host Bridge 0000:00:00.3 Host bridge: VIA Technologies, Inc. K8T800Pro Host Bridge 0000:00:00.4 Host bridge: VIA Technologies, Inc. K8T800Pro Host Bridge 0000:00:00.7 Host bridge: VIA Technologies, Inc. K8T800Pro Host Bridge 0000:00:01.0 PCI bridge: VIA Technologies, Inc. VT8237 PCI bridge [K8T800/K8T890 South] 0000:00:07.0 FireWire (IEEE 1394): VIA Technologies, Inc. IEEE 1394 Host Controller (rev 80) 0000:00:0a.0 Ethernet controller: Marvell Technology Group Ltd. 88E8001 Gigabit Ethernet Controller (rev 13) 0000:00:0c.0 Network controller: RaLink Ralink RT2500 802.11 Cardbus Reference Card (rev 01) 0000:00:0f.0 RAID bus controller: VIA Technologies, Inc. VIA VT6420 SATA RAID Controller (rev 80) 0000:00:0f.1 IDE interface: VIA Technologies, Inc. VT82C586A/B/VT82C686/A/B/VT823x/A/C PIPC Bus Master IDE (rev 06) 0000:00:10.0 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev 81) 0000:00:10.1 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev 81) 0000:00:10.2 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev 81) 0000:00:10.3 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev 81) 0000:00:10.4 USB Controller: VIA Technologies, Inc. USB 2.0 (rev 86) 0000:00:11.0 ISA bridge: VIA Technologies, Inc. VT8237 ISA bridge [KT600/K8T800/K8T890 South] 0000:00:11.5 Multimedia audio controller: VIA Technologies, Inc. VT8233/A/8235/8237 AC97 Audio Controller (rev 60) 0000:00:18.0 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] HyperTransport Technology Configuration 0000:00:18.1 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Address Map 0000:00:18.2 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] DRAM Controller 0000:00:18.3 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Miscellaneous Control 0000:01:00.0 VGA compatible controller: ATI Technologies Inc RV280 [Radeon 9200 SE] (rev 01) 0000:01:00.1 Display controller: ATI Technologies Inc RV280 [Radeon 9200 SE] (Secondary) (rev 01) --------------000609040409060102010308-- ------------------------------------------------------- SF.Net email is sponsored by: Tame your development challenges with Apache's Geronimo App Server. Download it for free - -and be entered to win a 42" plasma tv or your very own Sony(tm)PSP. Click here to play: http://sourceforge.net/geronimo.php