From mboxrd@z Thu Jan 1 00:00:00 1970 From: Raphael Clifford Subject: Re: 2.6.16-rc1 will not boot on msi rs480m2 when either acpi orapic is enabled Date: Mon, 23 Jan 2006 19:55:47 +0000 Message-ID: <43D534C3.5020900@clifford.net> References: <43D4FE2F.5080700@clifford.net> <200601231000.46575.bjorn.helgaas@hp.com> <43D528A0.8030704@clifford.net> Mime-Version: 1.0 Content-Type: text/plain; charset=ISO-8859-1; format=flowed Content-Transfer-Encoding: 7bit Return-path: Received: from ptb-relay03.plus.net ([212.159.14.214]:2267 "EHLO ptb-relay03.plus.net") by vger.kernel.org with ESMTP id S932454AbWAWTug (ORCPT ); Mon, 23 Jan 2006 14:50:36 -0500 In-Reply-To: <43D528A0.8030704@clifford.net> Sender: linux-acpi-owner@vger.kernel.org List-Id: linux-acpi@vger.kernel.org To: Bjorn Helgaas Cc: linux-acpi@vger.kernel.org Raphael Clifford wrote: > Bjorn Helgaas wrote: >> On Monday 23 January 2006 09:02, Raphael Clifford wrote: >> >>> MSI rs480m2 system (AMD64 processor) will not boot when either acpi >>> or apic are >>> enabled in the boot arguments. This has been tested in many kernels >>> (gentoo and vanilla) up >>> to and including 2.6.16-rc1. >> >> Can you try "pci=routeirq"? Can you capture the entire boot output >> with a serial console or netconsole? Are any BIOS updates available >> for this box? >> >> -- > The system boots with pci=routeirq as the only boot prompt argument. > The latest dmesg is attached below. For full debug info on the system > please see > > > http://bugzilla.kernel.org/show_bug.cgi?id=5933 > > Do you need to see the entire boot output specifically from the cases > where it doesn't boot too? > > [... dmesg cut ...] It seems I made a brown paper bag error in my testing and 2.6.16-rc1 *does* in fact boot now with BOTH acpi and apic enabled (previous kernel versions didn't and you must have both enabled both for it to boot)! The only remaining signs of problems it seems are "APIC error on CPU0: 04(40)" and "Losing some ticks... checking if CPU frequency changed. Your time source seems to be instable or some driver is hogging interupts rip ext3_reserve_inode_write+0x3a/0x94 " The system is still jerky and jumpy when ripping a DVD for example with 50-70% "si" in top. Raphael ---------- Latest dmesg ------------ Bootdata ok (command line is root=/dev/ram0 init=/linuxrc ramdisk=8192 real_root=/dev/sda5 udev ) Linux version 2.6.16-rc1 (root@localhost) (gcc version 3.4.4 (Gentoo 3.4.4-r1, ssp-3.4.4-1.0, pie-8.7.8)) #1 Sat Jan 21 14:56:38 GMT 2006 BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000009f800 (usable) BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved) BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 000000003bef0000 (usable) BIOS-e820: 000000003bef0000 - 000000003bef3000 (ACPI NVS) BIOS-e820: 000000003bef3000 - 000000003bf00000 (ACPI data) BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved) BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved) ACPI: RSDP (v000 RS480 ) @ 0x00000000000f8070 ACPI: RSDT (v001 RS480 AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x000000003bef3040 ACPI: FADT (v002 RS480 AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x000000003bef30c0 ACPI: SSDT (v001 PTLTD POWERNOW 0x00000001 LTP 0x00000001) @ 0x000000003bef69c0 ACPI: SRAT (v001 AMD HAMMER 0x00000001 AMD 0x00000001) @ 0x000000003bef6ac0 ACPI: MCFG (v001 RS480 AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x000000003bef6bc0 ACPI: MADT (v001 RS480 AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x000000003bef6900 ACPI: DSDT (v001 RS480 AWRDACPI 0x00001000 MSFT 0x0100000e) @ 0x0000000000000000 On node 0 totalpages: 240915 DMA zone: 2823 pages, LIFO batch:0 DMA32 zone: 238092 pages, LIFO batch:31 Normal zone: 0 pages, LIFO batch:0 HighMem zone: 0 pages, LIFO batch:0 ACPI: PM-Timer IO Port: 0x4008 ACPI: Local APIC address 0xfee00000 ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) Processor #0 15:15 APIC version 16 ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] disabled) ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) IOAPIC[0]: apic_id 2, version 33, address 0xfec00000, GSI 0-23 ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 21 low level) ACPI: IRQ0 used by override. ACPI: IRQ2 used by override. Setting APIC routing to flat Using ACPI (MADT) for SMP configuration information Allocating PCI resources starting at 40000000 (gap: 3bf00000:a4100000) Checking aperture... CPU 0: aperture @ 218a000000 size 32 MB Aperture from northbridge cpu 0 too small (32 MB) No AGP bridge found Built 1 zonelists Kernel command line: root=/dev/ram0 init=/linuxrc ramdisk=8192 real_root=/dev/sda5 udev Initializing CPU#0 PID hash table entries: 4096 (order: 12, 131072 bytes) time.c: Using 3.579545 MHz PM timer. time.c: Detected 1790.895 MHz processor. time.c: Using PIT/TSC based timekeeping. Console: colour VGA+ 80x25 Dentry cache hash table entries: 131072 (order: 8, 1048576 bytes) Inode-cache hash table entries: 65536 (order: 7, 524288 bytes) PCI-DMA: Disabling IOMMU. Memory: 960000k/981952k available (2786k kernel code, 21036k reserved, 1087k data, 200k init) Calibrating delay using timer specific routine.. 3588.84 BogoMIPS (lpj=7177687) Mount-cache hash table entries: 256 CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) CPU: L2 Cache: 512K (64 bytes/line) mtrr: v2.0 (20020519) CPU: AMD Athlon(tm) 64 Processor 3000+ stepping 00 Using local APIC timer interrupts. Detected 12.436 MHz APIC timer. testing NMI watchdog ... OK. checking if image is initramfs... it is Freeing initrd memory: 1433k freed DMI 2.4 present. NET: Registered protocol family 16 ACPI: bus type pci registered PCI: Using configuration type 1 PCI: Using MMCONFIG at e0000000 ACPI: Subsystem revision 20050902 GSI 21 sharing vector 0xA9 and IRQ 21 ACPI: Interpreter enabled ACPI: Using IOAPIC for interrupt routing ACPI: PCI Root Bridge [PCI0] (0000:00) PCI: Probing PCI hardware (bus 00) ACPI: Assume root bridge [\_SB_.PCI0] bus is 0 PCI: Ignoring BAR0-3 of IDE controller 0000:00:14.1 Boot video device is 0000:01:05.0 PCI: Transparent bridge - 0000:00:14.4 ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 11) *0, disabled. ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 10 11) *0, disabled. ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 10 11) *0, disabled. ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 10 11) *0, disabled. ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 *5 6 7 10 11) ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 *11) ACPI: PCI Interrupt Link [LNK0] (IRQs 3 4 5 6 7 10 *11), disabled. ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 5 6 7 *10 11) ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P2P_._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.AGP_._PRT] SCSI subsystem initialized usbcore: registered new driver usbfs usbcore: registered new driver hub PCI: Using ACPI for IRQ routing PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report PCI: Cannot allocate resource region 3 of device 0000:00:00.0 TC classifier action (bugs to netdev@vger.kernel.org cc hadi@cyberus.ca) PCI: Bridge: 0000:00:01.0 IO window: e000-efff MEM window: fdd00000-fddfffff PREFETCH window: d8000000-dfffffff PCI: Bridge: 0000:00:14.4 IO window: d000-dfff MEM window: fdc00000-fdcfffff PREFETCH window: fde00000-fdefffff IA32 emulation $Id: sys_ia32.c,v 1.32 2002/03/24 13:02:28 ak Exp $ Total HugeTLB memory allocated, 0 JFS: nTxBlock = 7515, nTxLock = 60122 SGI XFS with ACLs, large block/inode numbers, no debug enabled Initializing Cryptographic API io scheduler noop registered io scheduler anticipatory registered io scheduler deadline registered io scheduler cfq registered pci_hotplug: PCI Hot Plug PCI Core version: 0.5 acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5 acpiphp_glue: can't get bus number, assuming 0 ACPI: Power Button (FF) [PWRF] ACPI: Power Button (CM) [PWRB] ACPI: Processor [CPU0] (supports 8 throttling states) ibm_acpi: ec object not found Real Time Clock Driver v1.12ac Non-volatile memory driver v1.2 Linux agpgart interface v0.101 (c) Dave Jones serio: i8042 AUX port at 0x60,0x64 irq 12 serio: i8042 KBD port at 0x60,0x64 irq 1 Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing disabled serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A RAMDISK driver initialized: 16 RAM disks of 8192K size 1024 blocksize loop: loaded (max 8 devices) Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx Probing IDE interface ide0... hda: BENQ DVD DD DW1640, ATAPI CD/DVD-ROM drive Probing IDE interface ide1... ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 hda: ATAPI 126X DVD-ROM DVD-R CD-R/RW drive, 2048kB Cache Uniform CD-ROM driver Revision: 3.20 usbmon: debugfs is not available mice: PS/2 mouse device common for all mice md: linear personality registered for level -1 md: raid0 personality registered for level 0 md: raid1 personality registered for level 1 md: raid5 personality registered for level 5 md: raid4 personality registered for level 4 raid5: automatically using best checksumming function: generic_sse generic_sse: 5459.000 MB/sec raid5: using function: generic_sse (5459.000 MB/sec) raid6: int64x1 833 MB/s raid6: int64x2 1040 MB/s raid6: int64x4 1081 MB/s raid6: int64x8 817 MB/s raid6: sse2x1 1087 MB/s raid6: sse2x2 1465 MB/s raid6: sse2x4 1663 MB/s raid6: using algorithm sse2x4 (1663 MB/s) md: raid6 personality registered for level 6 md: multipath personality registered for level -4 md: md driver 0.90.3 MAX_MD_DEVS=256, MD_SB_DISKS=27 md: bitmap version 4.39 device-mapper: 4.5.0-ioctl (2005-10-04) initialised: dm-devel@redhat.com NET: Registered protocol family 2 IP route cache hash table entries: 32768 (order: 6, 262144 bytes) TCP established hash table entries: 131072 (order: 8, 1048576 bytes) TCP bind hash table entries: 65536 (order: 7, 524288 bytes) TCP: Hash tables configured (established 131072 bind 65536) TCP reno registered TCP bic registered NET: Registered protocol family 1 NET: Registered protocol family 10 lo: Disabled Privacy Extensions IPv6 over IPv4 tunneling driver NET: Registered protocol family 17 NET: Registered protocol family 15 powernow-k8: Found 1 AMD Athlon 64 / Opteron processors (version 1.60.0) powernow-k8: 0 : fid 0xa (1800 MHz), vid 0x6 (1400 mV) powernow-k8: 1 : fid 0x2 (1000 MHz), vid 0x12 (1100 mV) cpu_init done, current fid 0xa, vid 0x6 ACPI wakeup devices: PCI0 USB0 USB1 USB2 AUDO P2P MAC ACPI: (supports S0 S1 S3 S5) BIOS EDD facility v0.16 2004-Jun-25, 1 devices found Freeing unused kernel memory: 200k freed GSI 16 sharing vector 0xB1 and IRQ 16 ACPI: PCI Interrupt 0000:00:13.2[A] -> GSI 19 (level, low) -> IRQ 16 ehci_hcd 0000:00:13.2: EHCI Host Controller ehci_hcd 0000:00:13.2: new USB bus registered, assigned bus number 1 ehci_hcd 0000:00:13.2: irq 16, io mem 0xfe02b000 ehci_hcd 0000:00:13.2: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 usb usb1: configuration #1 chosen from 1 choice hub 1-0:1.0: USB hub found hub 1-0:1.0: 8 ports detected input: AT Translated Set 2 keyboard as /class/input/input0 usb 1-7: new high speed USB device using ehci_hcd and address 3 usb 1-7: configuration #1 chosen from 1 choice usbcore: registered new driver hiddev usbcore: registered new driver usbhid drivers/usb/input/hid-core.c: v2.6:USB HID core driver Initializing USB Mass Storage driver... scsi0 : SCSI emulation for USB Mass Storage devices usbcore: registered new driver usb-storage USB Mass Storage support registered. usb-storage: device found at 3 usb-storage: waiting for device to settle before scanning USB Universal Host Controller Interface driver v2.3 ohci_hcd: 2005 April 22 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI) ACPI: PCI Interrupt 0000:00:13.0[A] -> GSI 19 (level, low) -> IRQ 16 ohci_hcd 0000:00:13.0: OHCI Host Controller ohci_hcd 0000:00:13.0: new USB bus registered, assigned bus number 2 ohci_hcd 0000:00:13.0: irq 16, io mem 0xfe02d000 usb usb2: configuration #1 chosen from 1 choice hub 2-0:1.0: USB hub found hub 2-0:1.0: 4 ports detected ACPI: PCI Interrupt 0000:00:13.1[A] -> GSI 19 (level, low) -> IRQ 16 ohci_hcd 0000:00:13.1: OHCI Host Controller ohci_hcd 0000:00:13.1: new USB bus registered, assigned bus number 3 ohci_hcd 0000:00:13.1: irq 16, io mem 0xfe02c000 usb usb3: configuration #1 chosen from 1 choice hub 3-0:1.0: USB hub found hub 3-0:1.0: 4 ports detected libata version 1.20 loaded. sata_sil 0000:00:11.0: version 0.9 GSI 17 sharing vector 0xB9 and IRQ 17 ACPI: PCI Interrupt 0000:00:11.0[A] -> GSI 23 (level, low) -> IRQ 17 ata1: SATA max UDMA/100 cmd 0xFFFFC2000002E080 ctl 0xFFFFC2000002E08A bmdma 0xFFFFC2000002E000 irq 17 ata2: SATA max UDMA/100 cmd 0xFFFFC2000002E0C0 ctl 0xFFFFC2000002E0CA bmdma 0xFFFFC2000002E008 irq 17 ata1: SATA link down (SStatus 0) scsi1 : sata_sil usb 3-1: new low speed USB device using ohci_hcd and address 2 ata2: SATA link down (SStatus 0) scsi2 : sata_sil GSI 18 sharing vector 0xC1 and IRQ 18 ACPI: PCI Interrupt 0000:00:12.0[A] -> GSI 22 (level, low) -> IRQ 18 ata3: SATA max UDMA/100 cmd 0xFFFFC20000030080 ctl 0xFFFFC2000003008A bmdma 0xFFFFC20000030000 irq 18 ata4: SATA max UDMA/100 cmd 0xFFFFC200000300C0 ctl 0xFFFFC200000300CA bmdma 0xFFFFC20000030008 irq 18 usb 3-1: configuration #1 chosen from 1 choice input: Microsoft Microsoft 3-Button Mouse with IntelliEye(TM) as /class/input/input1 input: USB HID v1.10 Mouse [Microsoft Microsoft 3-Button Mouse with IntelliEye(TM)] on usb-0000:00:13.1-1 ata3: SATA link up 1.5 Gbps (SStatus 113) ata3: dev 0 cfg 49:2f00 82:746b 83:7f01 84:4023 85:7468 86:3c01 87:4023 88:40ff ata3: dev 0 ATA-7, max UDMA7, 390721968 sectors: LBA48 ata3: dev 0 configured for UDMA/100 scsi3 : sata_sil ata4: SATA link down (SStatus 0) scsi4 : sata_sil Vendor: ATA Model: SAMSUNG SP2004C Rev: VM10 Type: Direct-Access ANSI SCSI revision: 05 SCSI device sda: 390721968 512-byte hdwr sectors (200050 MB) sda: Write Protect is off sda: Mode Sense: 00 3a 00 00 SCSI device sda: drive cache: write back SCSI device sda: 390721968 512-byte hdwr sectors (200050 MB) sda: Write Protect is off sda: Mode Sense: 00 3a 00 00 SCSI device sda: drive cache: write back sda: sda1 sda2 sda3 < sda5 sda6 > sda4 sd 3:0:0:0: Attached scsi disk sda sd 3:0:0:0: Attached scsi generic sg0 type 0 ReiserFS: sda5: warning: sh-2021: reiserfs_fill_super: can not find reiserfs on sda5 kjournald starting. Commit interval 5 seconds EXT3-fs warning: maximal mount count reached, running e2fsck is recommended EXT3 FS on sda5, internal journal EXT3-fs: recovery complete. EXT3-fs: mounted filesystem with ordered data mode. Vendor: USB2.0 Model: CF CardReader Rev: Type: Direct-Access ANSI SCSI revision: 00 sd 0:0:0:0: Attached scsi removable disk sdb sd 0:0:0:0: Attached scsi generic sg1 type 0 Vendor: USB2.0 Model: CBO CardReader Rev: Type: Direct-Access ANSI SCSI revision: 00 sd 0:0:0:1: Attached scsi removable disk sdc sd 0:0:0:1: Attached scsi generic sg2 type 0 usb-storage: device scan complete Adding 2811332k swap on /dev/sda6. Priority:-1 extents:1 across:2811332k EXT3-fs warning: maximal mount count reached, running e2fsck is recommended EXT3 FS on sda5, internal journal kjournald starting. Commit interval 5 seconds EXT3-fs warning: maximal mount count reached, running e2fsck is recommended EXT3 FS on sda4, internal journal EXT3-fs: recovery complete. EXT3-fs: mounted filesystem with ordered data mode. kjournald starting. Commit interval 5 seconds EXT3-fs warning: mounting unchecked fs, running e2fsck is recommended EXT3 FS on sda2, internal journal EXT3-fs: recovery complete. EXT3-fs: mounted filesystem with ordered data mode. NTFS driver 2.1.25 [Flags: R/O MODULE]. NTFS volume version 3.1. GSI 19 sharing vector 0xC9 and IRQ 19 ACPI: PCI Interrupt 0000:00:14.5[B] -> GSI 17 (level, low) -> IRQ 19 8139too Fast Ethernet driver 0.9.27 GSI 20 sharing vector 0xD1 and IRQ 20 ACPI: PCI Interrupt 0000:02:03.0[A] -> GSI 20 (level, low) -> IRQ 20 eth0: RealTek RTL8139 at 0xffffc20000066000, 00:13:d3:2e:29:c6, IRQ 20 eth0: Identified 8139 chip type 'RTL-8100B/8139D' eth0: link up, 100Mbps, full-duplex, lpa 0x41E1 smsc47m1: Found SMSC LPC47M15x/LPC47M192/LPC47M997 Driver 'smsc47m1' needs updating - please use bus_type methods eth0: no IPv6 routers present APIC error on CPU0: 04(40) UDF-fs INFO UDF 0.9.8.1 (2004/29/09) Mounting volume 'DUNE_CVR_MNT', timestamp 2036/02/07 01:58 (1000) Losing some ticks... checking if CPU frequency changed. warning: many lost ticks. Your time source seems to be instable or some driver is hogging interupts rip ext3_reserve_inode_write+0x3a/0x94