* Convert PRINT_DEBUG(DB_ERROR/WARNING,...) to ACPI_ERROR/WARNING
@ 2006-02-03 21:19 Thomas Renninger
0 siblings, 0 replies; 8+ messages in thread
From: Thomas Renninger @ 2006-02-03 21:19 UTC (permalink / raw)
To: ACPI-ML, Len Brown
[-- Attachment #1: Type: text/plain, Size: 597 bytes --]
This patch lets all ACPI errors and warnings be printed
even ACPI_DEBUG is disabled.
I removed all "proc entry could not be created" messages
and returned -ENODEV.
I also removed all "Error removing/adding notify handler" messages.
I will provide a second patch (ACPICA) and add a message to
the add/remove_handler function itself.
This should give the "non kernel debuggers" a chance to figure out
why their xy hardware does not work without the need of recompiling
kernels. And should provide as with better bug reports...
This one is on top of Len's latest 2.6.16-rc1/2 push.
Thomas
[-- Attachment #2: acpi_show_errors --]
[-- Type: text/plain, Size: 78086 bytes --]
Subject: Enables important ACPI errors even ACPI_DEBUG is not set.
Lets all ACPI errors and warnings be printed
even ACPI_DEBUG is disabled.
signed-off-by: trenn@suse.de
ac.c | 12 +--------
acpi_memhotplug.c | 64 +++++++++++++++++++------------------------------
battery.c | 31 ++++++-----------------
bus.c | 22 +++++++---------
button.c | 18 +++----------
container.c | 2 -
debug.c | 5 ---
ec.c | 13 +++------
event.c | 5 ---
fan.c | 7 +----
hotkey.c | 38 ++++++-----------------------
osl.c | 8 +++---
pci_bind.c | 50 +++++++++++++++++++-------------------
pci_irq.c | 20 ++++++---------
pci_link.c | 48 ++++++++++++++++--------------------
pci_root.c | 15 ++++++-----
power.c | 22 +++++++---------
processor_core.c | 59 +++++++++++++++++++--------------------------
processor_idle.c | 14 +++-------
processor_perflib.c | 37 +++++++++++-----------------
processor_thermal.c | 10 +++----
processor_throttling.c | 2 -
scan.c | 7 ++---
system.c | 3 --
thermal.c | 58 ++++++++++++++------------------------------
utils.c | 50 ++++++++++++++++++--------------------
video.c | 54 ++++++++++++-----------------------------
Index: linux-2.6.15/drivers/acpi/ac.c
===================================================================
--- linux-2.6.15.orig/drivers/acpi/ac.c
+++ linux-2.6.15/drivers/acpi/ac.c
@@ -91,8 +91,7 @@ static int acpi_ac_get_state(struct acpi
status = acpi_evaluate_integer(ac->handle, "_PSR", NULL, &ac->state);
if (ACPI_FAILURE(status)) {
- ACPI_DEBUG_PRINT((ACPI_DB_ERROR,
- "Error reading AC Adapter state\n"));
+ ACPI_ERROR((AE_INFO, "Error reading AC Adapter state\n"));
ac->state = ACPI_AC_STATUS_UNKNOWN;
return_VALUE(-ENODEV);
}
@@ -159,9 +158,7 @@ static int acpi_ac_add_fs(struct acpi_de
entry = create_proc_entry(ACPI_AC_FILE_STATE,
S_IRUGO, acpi_device_dir(device));
if (!entry)
- ACPI_DEBUG_PRINT((ACPI_DB_ERROR,
- "Unable to create '%s' fs entry\n",
- ACPI_AC_FILE_STATE));
+ return_VALUE(-ENODEV);
else {
entry->proc_fops = &acpi_ac_fops;
entry->data = acpi_driver_data(device);
@@ -249,8 +246,6 @@ static int acpi_ac_add(struct acpi_devic
ACPI_DEVICE_NOTIFY, acpi_ac_notify,
ac);
if (ACPI_FAILURE(status)) {
- ACPI_DEBUG_PRINT((ACPI_DB_ERROR,
- "Error installing notify handler\n"));
result = -ENODEV;
goto end;
}
@@ -282,9 +277,6 @@ static int acpi_ac_remove(struct acpi_de
status = acpi_remove_notify_handler(ac->handle,
ACPI_DEVICE_NOTIFY, acpi_ac_notify);
- if (ACPI_FAILURE(status))
- ACPI_DEBUG_PRINT((ACPI_DB_ERROR,
- "Error removing notify handler\n"));
acpi_ac_remove_fs(device);
Index: linux-2.6.15/drivers/acpi/acpi_memhotplug.c
===================================================================
--- linux-2.6.15.orig/drivers/acpi/acpi_memhotplug.c
+++ linux-2.6.15/drivers/acpi/acpi_memhotplug.c
@@ -153,15 +153,14 @@ acpi_memory_get_device(acpi_handle handl
status = acpi_get_parent(handle, &phandle);
if (ACPI_FAILURE(status)) {
- ACPI_DEBUG_PRINT((ACPI_DB_ERROR, "Error in acpi_get_parent\n"));
+ ACPI_ERROR((AE_INFO, "Cannot find acpi parent\n"));
return_VALUE(-EINVAL);
}
/* Get the parent device */
status = acpi_bus_get_device(phandle, &pdevice);
if (ACPI_FAILURE(status)) {
- ACPI_DEBUG_PRINT((ACPI_DB_ERROR,
- "Error in acpi_bus_get_device\n"));
+ ACPI_ERROR((AE_INFO, "Cannot get acpi bus device\n"));
return_VALUE(-EINVAL);
}
@@ -171,7 +170,7 @@ acpi_memory_get_device(acpi_handle handl
*/
status = acpi_bus_add(&device, pdevice, handle, ACPI_BUS_TYPE_DEVICE);
if (ACPI_FAILURE(status)) {
- ACPI_DEBUG_PRINT((ACPI_DB_ERROR, "Error in acpi_bus_add\n"));
+ ACPI_ERROR((AE_INFO, "Cannot add acpi bus\n"));
return_VALUE(-EINVAL);
}
end:
@@ -219,8 +218,7 @@ static int acpi_memory_enable_device(str
/* Get the range from the _CRS */
result = acpi_memory_get_device_resources(mem_device);
if (result) {
- ACPI_DEBUG_PRINT((ACPI_DB_ERROR,
- "\nget_device_resources failed\n"));
+ ACPI_ERROR((AE_INFO, "\nget_device_resources failed\n"));
mem_device->state = MEMORY_INVALID_STATE;
return result;
}
@@ -232,7 +230,7 @@ static int acpi_memory_enable_device(str
result = add_memory(mem_device->start_addr,
(mem_device->end_addr - mem_device->start_addr) + 1);
if (result) {
- ACPI_DEBUG_PRINT((ACPI_DB_ERROR, "\nadd_memory failed\n"));
+ ACPI_ERROR((AE_INFO, "\nadd_memory failed\n"));
mem_device->state = MEMORY_INVALID_STATE;
return result;
}
@@ -258,7 +256,7 @@ static int acpi_memory_powerdown_device(
"_EJ0", &arg_list, NULL);
/* Return on _EJ0 failure */
if (ACPI_FAILURE(status)) {
- ACPI_DEBUG_PRINT((ACPI_DB_ERROR, "_EJ0 failed.\n"));
+ ACPI_ERROR((AE_INFO, "_EJ0 failed.\n"));
return_VALUE(-ENODEV);
}
@@ -289,15 +287,14 @@ static int acpi_memory_disable_device(st
*/
result = remove_memory(start, len);
if (result) {
- ACPI_DEBUG_PRINT((ACPI_DB_ERROR, "Hot-Remove failed.\n"));
+ ACPI_ERROR((AE_INFO, "Hot-Remove failed.\n"));
return_VALUE(result);
}
/* Power-off and eject the device */
result = acpi_memory_powerdown_device(mem_device);
if (result) {
- ACPI_DEBUG_PRINT((ACPI_DB_ERROR,
- "Device Power Down failed.\n"));
+ ACPI_ERROR((AE_INFO, "Device Power Down failed.\n"));
/* Set the status of the device to invalid */
mem_device->state = MEMORY_INVALID_STATE;
return result;
@@ -324,15 +321,14 @@ static void acpi_memory_device_notify(ac
ACPI_DEBUG_PRINT((ACPI_DB_INFO,
"\nReceived DEVICE CHECK notification for device\n"));
if (acpi_memory_get_device(handle, &mem_device)) {
- ACPI_DEBUG_PRINT((ACPI_DB_ERROR,
- "Error in finding driver data\n"));
+ ACPI_ERROR((AE_INFO, "Cannot find driver data\n"));
return_VOID;
}
if (!acpi_memory_check_device(mem_device)) {
if (acpi_memory_enable_device(mem_device))
- ACPI_DEBUG_PRINT((ACPI_DB_ERROR,
- "Error in acpi_memory_enable_device\n"));
+ ACPI_ERROR((AE_INFO,
+ "Cannot enable memory device\n"));
}
break;
case ACPI_NOTIFY_EJECT_REQUEST:
@@ -340,14 +336,12 @@ static void acpi_memory_device_notify(ac
"\nReceived EJECT REQUEST notification for device\n"));
if (acpi_bus_get_device(handle, &device)) {
- ACPI_DEBUG_PRINT((ACPI_DB_ERROR,
- "Device doesn't exist\n"));
+ ACPI_ERROR((AE_INFO, "Device doesn't exist\n"));
break;
}
mem_device = acpi_driver_data(device);
if (!mem_device) {
- ACPI_DEBUG_PRINT((ACPI_DB_ERROR,
- "Driver Data is NULL\n"));
+ ACPI_ERROR((AE_INFO, "Driver Data is NULL\n"));
break;
}
@@ -358,8 +352,8 @@ static void acpi_memory_device_notify(ac
* with generic sysfs driver
*/
if (acpi_memory_disable_device(mem_device))
- ACPI_DEBUG_PRINT((ACPI_DB_ERROR,
- "Error in acpi_memory_disable_device\n"));
+ ACPI_ERROR((AE_INFO,
+ "Cannot disable acpi memory device\n"));
/*
* TBD: Invoke acpi_bus_remove to cleanup data structures
*/
@@ -463,18 +457,15 @@ acpi_memory_register_notify_handler(acpi
ACPI_FUNCTION_TRACE("acpi_memory_register_notify_handler");
status = is_memory_device(handle);
- if (ACPI_FAILURE(status))
+ if (ACPI_FAILURE(status)){
+ ACPI_WARNING((AE_INFO, "handle is no memory device\n"));
return_ACPI_STATUS(AE_OK); /* continue */
+ }
status = acpi_install_notify_handler(handle, ACPI_SYSTEM_NOTIFY,
acpi_memory_device_notify, NULL);
- if (ACPI_FAILURE(status)) {
- ACPI_DEBUG_PRINT((ACPI_DB_ERROR,
- "Error installing notify handler\n"));
- return_ACPI_STATUS(AE_OK); /* continue */
- }
-
- return_ACPI_STATUS(status);
+ /* continue */
+ return_ACPI_STATUS(AE_OK);
}
static acpi_status
@@ -486,19 +477,16 @@ acpi_memory_deregister_notify_handler(ac
ACPI_FUNCTION_TRACE("acpi_memory_deregister_notify_handler");
status = is_memory_device(handle);
- if (ACPI_FAILURE(status))
+ if (ACPI_FAILURE(status)){
+ ACPI_WARNING((AE_INFO, "handle is no memory device\n"));
return_ACPI_STATUS(AE_OK); /* continue */
+ }
status = acpi_remove_notify_handler(handle,
ACPI_SYSTEM_NOTIFY,
acpi_memory_device_notify);
- if (ACPI_FAILURE(status)) {
- ACPI_DEBUG_PRINT((ACPI_DB_ERROR,
- "Error removing notify handler\n"));
- return_ACPI_STATUS(AE_OK); /* continue */
- }
- return_ACPI_STATUS(status);
+ return_ACPI_STATUS(AE_OK); /* continue */
}
static int __init acpi_memory_device_init(void)
@@ -519,7 +507,7 @@ static int __init acpi_memory_device_ini
NULL, NULL);
if (ACPI_FAILURE(status)) {
- ACPI_DEBUG_PRINT((ACPI_DB_ERROR, "walk_namespace failed\n"));
+ ACPI_ERROR((AE_INFO, "walk_namespace failed\n"));
acpi_bus_unregister_driver(&acpi_memory_device_driver);
return_VALUE(-ENODEV);
}
@@ -543,7 +531,7 @@ static void __exit acpi_memory_device_ex
NULL, NULL);
if (ACPI_FAILURE(status))
- ACPI_DEBUG_PRINT((ACPI_DB_ERROR, "walk_namespace failed\n"));
+ ACPI_ERROR((AE_INFO, "walk_namespace failed\n"));
acpi_bus_unregister_driver(&acpi_memory_device_driver);
Index: linux-2.6.15/drivers/acpi/battery.c
===================================================================
--- linux-2.6.15.orig/drivers/acpi/battery.c
+++ linux-2.6.15/drivers/acpi/battery.c
@@ -141,7 +141,7 @@ acpi_battery_get_info(struct acpi_batter
status = acpi_evaluate_object(battery->handle, "_BIF", NULL, &buffer);
if (ACPI_FAILURE(status)) {
- ACPI_DEBUG_PRINT((ACPI_DB_ERROR, "Error evaluating _BIF\n"));
+ ACPI_ERROR((AE_INFO, "Error evaluating _BIF\n"));
return_VALUE(-ENODEV);
}
@@ -151,7 +151,7 @@ acpi_battery_get_info(struct acpi_batter
status = acpi_extract_package(package, &format, &data);
if (status != AE_BUFFER_OVERFLOW) {
- ACPI_DEBUG_PRINT((ACPI_DB_ERROR, "Error extracting _BIF\n"));
+ ACPI_ERROR((AE_INFO, "Error extracting _BIF\n"));
result = -ENODEV;
goto end;
}
@@ -165,7 +165,7 @@ acpi_battery_get_info(struct acpi_batter
status = acpi_extract_package(package, &format, &data);
if (ACPI_FAILURE(status)) {
- ACPI_DEBUG_PRINT((ACPI_DB_ERROR, "Error extracting _BIF\n"));
+ ACPI_ERROR((AE_INFO, "Error extracting _BIF\n"));
kfree(data.pointer);
result = -ENODEV;
goto end;
@@ -202,7 +202,7 @@ acpi_battery_get_status(struct acpi_batt
status = acpi_evaluate_object(battery->handle, "_BST", NULL, &buffer);
if (ACPI_FAILURE(status)) {
- ACPI_DEBUG_PRINT((ACPI_DB_ERROR, "Error evaluating _BST\n"));
+ ACPI_ERROR((AE_INFO, "Error evaluating _BST\n"));
return_VALUE(-ENODEV);
}
@@ -212,7 +212,7 @@ acpi_battery_get_status(struct acpi_batt
status = acpi_extract_package(package, &format, &data);
if (status != AE_BUFFER_OVERFLOW) {
- ACPI_DEBUG_PRINT((ACPI_DB_ERROR, "Error extracting _BST\n"));
+ ACPI_ERROR((AE_INFO, "Error extracting _BST\n"));
result = -ENODEV;
goto end;
}
@@ -226,7 +226,7 @@ acpi_battery_get_status(struct acpi_batt
status = acpi_extract_package(package, &format, &data);
if (ACPI_FAILURE(status)) {
- ACPI_DEBUG_PRINT((ACPI_DB_ERROR, "Error extracting _BST\n"));
+ ACPI_ERROR((AE_INFO, "Error extracting _BST\n"));
kfree(data.pointer);
result = -ENODEV;
goto end;
@@ -458,8 +458,6 @@ static int acpi_battery_read_state(struc
if ((bst->state & 0x01) && (bst->state & 0x02)) {
seq_printf(seq,
"charging state: charging/discharging\n");
- ACPI_DEBUG_PRINT((ACPI_DB_ERROR,
- "Battery Charging and Discharging?\n"));
} else if (bst->state & 0x01)
seq_printf(seq, "charging state: discharging\n");
else if (bst->state & 0x02)
@@ -609,9 +607,7 @@ static int acpi_battery_add_fs(struct ac
entry = create_proc_entry(ACPI_BATTERY_FILE_INFO,
S_IRUGO, acpi_device_dir(device));
if (!entry)
- ACPI_DEBUG_PRINT((ACPI_DB_ERROR,
- "Unable to create '%s' fs entry\n",
- ACPI_BATTERY_FILE_INFO));
+ return_VALUE(-ENODEV);
else {
entry->proc_fops = &acpi_battery_info_ops;
entry->data = acpi_driver_data(device);
@@ -622,9 +618,7 @@ static int acpi_battery_add_fs(struct ac
entry = create_proc_entry(ACPI_BATTERY_FILE_STATUS,
S_IRUGO, acpi_device_dir(device));
if (!entry)
- ACPI_DEBUG_PRINT((ACPI_DB_ERROR,
- "Unable to create '%s' fs entry\n",
- ACPI_BATTERY_FILE_STATUS));
+ return_VALUE(-ENODEV);
else {
entry->proc_fops = &acpi_battery_state_ops;
entry->data = acpi_driver_data(device);
@@ -636,9 +630,7 @@ static int acpi_battery_add_fs(struct ac
S_IFREG | S_IRUGO | S_IWUSR,
acpi_device_dir(device));
if (!entry)
- ACPI_DEBUG_PRINT((ACPI_DB_ERROR,
- "Unable to create '%s' fs entry\n",
- ACPI_BATTERY_FILE_ALARM));
+ return_VALUE(-ENODEV);
else {
entry->proc_fops = &acpi_battery_alarm_ops;
entry->data = acpi_driver_data(device);
@@ -732,8 +724,6 @@ static int acpi_battery_add(struct acpi_
ACPI_DEVICE_NOTIFY,
acpi_battery_notify, battery);
if (ACPI_FAILURE(status)) {
- ACPI_DEBUG_PRINT((ACPI_DB_ERROR,
- "Error installing notify handler\n"));
result = -ENODEV;
goto end;
}
@@ -766,9 +756,6 @@ static int acpi_battery_remove(struct ac
status = acpi_remove_notify_handler(battery->handle,
ACPI_DEVICE_NOTIFY,
acpi_battery_notify);
- if (ACPI_FAILURE(status))
- ACPI_DEBUG_PRINT((ACPI_DB_ERROR,
- "Error removing notify handler\n"));
acpi_battery_remove_fs(device);
Index: linux-2.6.15/drivers/acpi/bus.c
===================================================================
--- linux-2.6.15.orig/drivers/acpi/bus.c
+++ linux-2.6.15/drivers/acpi/bus.c
@@ -69,8 +69,7 @@ int acpi_bus_get_device(acpi_handle hand
status = acpi_get_data(handle, acpi_bus_data_handler, (void **)device);
if (ACPI_FAILURE(status) || !*device) {
- ACPI_DEBUG_PRINT((ACPI_DB_WARN, "No context for object [%p]\n",
- handle));
+ ACPI_WARNING((AE_INFO, "No context for object [%p]\n", handle));
return_VALUE(-ENODEV);
}
@@ -197,8 +196,7 @@ int acpi_bus_set_power(acpi_handle handl
/* Make sure this is a valid target state */
if (!device->flags.power_manageable) {
- ACPI_DEBUG_PRINT((ACPI_DB_WARN,
- "Device is not power manageable\n"));
+ ACPI_INFO((AE_INFO, "Device is not power manageable\n"));
return_VALUE(-ENODEV);
}
/*
@@ -213,13 +211,13 @@ int acpi_bus_set_power(acpi_handle handl
return_VALUE(0);
}
if (!device->power.states[state].flags.valid) {
- ACPI_DEBUG_PRINT((ACPI_DB_WARN, "Device does not support D%d\n",
- state));
+ ACPI_WARNING((AE_INFO, "Device does not support D%d\n", state));
return_VALUE(-ENODEV);
}
if (device->parent && (state < device->parent->power.state)) {
- ACPI_DEBUG_PRINT((ACPI_DB_WARN,
- "Cannot set device to a higher-powered state than parent\n"));
+ ACPI_WARNING((AE_INFO,
+ "Cannot set device to a higher-powered"
+ " state than parent\n"));
return_VALUE(-ENODEV);
}
@@ -262,9 +260,9 @@ int acpi_bus_set_power(acpi_handle handl
end:
if (result)
- ACPI_DEBUG_PRINT((ACPI_DB_WARN,
- "Error transitioning device [%s] to D%d\n",
- device->pnp.bus_id, state));
+ ACPI_WARNING((AE_INFO,
+ "Error transitioning device [%s] to D%d\n",
+ device->pnp.bus_id, state));
else
ACPI_DEBUG_PRINT((ACPI_DB_INFO,
"Device [%s] transitioned to D%d\n",
@@ -579,7 +577,7 @@ static int __init acpi_bus_init_irq(void
status = acpi_evaluate_object(NULL, "\\_PIC", &arg_list, NULL);
if (ACPI_FAILURE(status) && (status != AE_NOT_FOUND)) {
- ACPI_DEBUG_PRINT((ACPI_DB_ERROR, "Error evaluating _PIC\n"));
+ ACPI_ERROR((AE_INFO, "Error evaluating _PIC\n"));
return_VALUE(-ENODEV);
}
Index: linux-2.6.15/drivers/acpi/button.c
===================================================================
--- linux-2.6.15.orig/drivers/acpi/button.c
+++ linux-2.6.15/drivers/acpi/button.c
@@ -207,9 +207,7 @@ static int acpi_button_add_fs(struct acp
entry = create_proc_entry(ACPI_BUTTON_FILE_INFO,
S_IRUGO, acpi_device_dir(device));
if (!entry)
- ACPI_DEBUG_PRINT((ACPI_DB_ERROR,
- "Unable to create '%s' fs entry\n",
- ACPI_BUTTON_FILE_INFO));
+ return_VALUE(-ENODEV);
else {
entry->proc_fops = &acpi_button_info_fops;
entry->data = acpi_driver_data(device);
@@ -221,9 +219,7 @@ static int acpi_button_add_fs(struct acp
entry = create_proc_entry(ACPI_BUTTON_FILE_STATE,
S_IRUGO, acpi_device_dir(device));
if (!entry)
- ACPI_DEBUG_PRINT((ACPI_DB_ERROR,
- "Unable to create '%s' fs entry\n",
- ACPI_BUTTON_FILE_INFO));
+ return -ENODEV;
else {
entry->proc_fops = &acpi_button_state_fops;
entry->data = acpi_driver_data(device);
@@ -349,8 +345,8 @@ static int acpi_button_add(struct acpi_d
sprintf(acpi_device_class(device), "%s/%s",
ACPI_BUTTON_CLASS, ACPI_BUTTON_SUBCLASS_LID);
} else {
- ACPI_DEBUG_PRINT((ACPI_DB_ERROR, "Unsupported hid [%s]\n",
- acpi_device_hid(device)));
+ ACPI_ERROR((AE_INFO, "Unsupported hid [%s]\n",
+ acpi_device_hid(device)));
result = -ENODEV;
goto end;
}
@@ -381,8 +377,6 @@ static int acpi_button_add(struct acpi_d
}
if (ACPI_FAILURE(status)) {
- ACPI_DEBUG_PRINT((ACPI_DB_ERROR,
- "Error installing notify handler\n"));
result = -ENODEV;
goto end;
}
@@ -440,10 +434,6 @@ static int acpi_button_remove(struct acp
break;
}
- if (ACPI_FAILURE(status))
- ACPI_DEBUG_PRINT((ACPI_DB_ERROR,
- "Error removing notify handler\n"));
-
acpi_button_remove_fs(device);
kfree(button);
Index: linux-2.6.15/drivers/acpi/container.c
===================================================================
--- linux-2.6.15.orig/drivers/acpi/container.c
+++ linux-2.6.15/drivers/acpi/container.c
@@ -94,7 +94,7 @@ static int acpi_container_add(struct acp
ACPI_FUNCTION_TRACE("acpi_container_add");
if (!device) {
- ACPI_DEBUG_PRINT((ACPI_DB_ERROR, "device is NULL\n"));
+ ACPI_ERROR((AE_INFO, "device is NULL\n"));
return_VALUE(-EINVAL);
}
Index: linux-2.6.15/drivers/acpi/debug.c
===================================================================
--- linux-2.6.15.orig/drivers/acpi/debug.c
+++ linux-2.6.15/drivers/acpi/debug.c
@@ -216,12 +216,9 @@ static int __init acpi_debug_init(void)
return_VALUE(error);
Error:
- ACPI_DEBUG_PRINT((ACPI_DB_ERROR,
- "Unable to create '%s' proc fs entry\n", name));
-
remove_proc_entry(ACPI_SYSTEM_FILE_DEBUG_LEVEL, acpi_root_dir);
remove_proc_entry(ACPI_SYSTEM_FILE_DEBUG_LAYER, acpi_root_dir);
- error = -EFAULT;
+ error = -ENODEV;
goto Done;
}
Index: linux-2.6.15/drivers/acpi/ec.c
===================================================================
--- linux-2.6.15.orig/drivers/acpi/ec.c
+++ linux-2.6.15/drivers/acpi/ec.c
@@ -957,9 +957,7 @@ static int acpi_ec_add_fs(struct acpi_de
entry = create_proc_entry(ACPI_EC_FILE_INFO, S_IRUGO,
acpi_device_dir(device));
if (!entry)
- ACPI_DEBUG_PRINT((ACPI_DB_WARN,
- "Unable to create '%s' fs entry\n",
- ACPI_EC_FILE_INFO));
+ return_VALUE(-ENODEV);
else {
entry->proc_fops = &acpi_ec_info_ops;
entry->data = acpi_driver_data(device);
@@ -1034,8 +1032,7 @@ static int acpi_ec_poll_add(struct acpi_
acpi_evaluate_integer(ec->common.handle, "_GPE", NULL,
&ec->common.gpe_bit);
if (ACPI_FAILURE(status)) {
- ACPI_DEBUG_PRINT((ACPI_DB_ERROR,
- "Error obtaining GPE bit assignment\n"));
+ ACPI_ERROR((AE_INFO, "Error obtaining GPE bit assignment\n"));
result = -ENODEV;
goto end;
}
@@ -1108,8 +1105,7 @@ static int acpi_ec_intr_add(struct acpi_
acpi_evaluate_integer(ec->common.handle, "_GPE", NULL,
&ec->common.gpe_bit);
if (ACPI_FAILURE(status)) {
- ACPI_DEBUG_PRINT((ACPI_DB_ERROR,
- "Error obtaining GPE bit assignment\n"));
+ ACPI_ERROR((AE_INFO, "Error obtaining GPE bit assignment\n"));
result = -ENODEV;
goto end;
}
@@ -1203,8 +1199,7 @@ static int acpi_ec_start(struct acpi_dev
acpi_ec_io_ports, ec);
if (ACPI_FAILURE(status)
|| ec->common.command_addr.register_bit_width == 0) {
- ACPI_DEBUG_PRINT((ACPI_DB_ERROR,
- "Error getting I/O port addresses"));
+ ACPI_ERROR((AE_INFO, "Error getting I/O port addresses"));
return_VALUE(-ENODEV);
}
Index: linux-2.6.15/drivers/acpi/event.c
===================================================================
--- linux-2.6.15.orig/drivers/acpi/event.c
+++ linux-2.6.15/drivers/acpi/event.c
@@ -122,10 +122,7 @@ static int __init acpi_event_init(void)
if (entry)
entry->proc_fops = &acpi_system_event_ops;
else {
- ACPI_DEBUG_PRINT((ACPI_DB_ERROR,
- "Unable to create '%s' proc fs entry\n",
- "event"));
- error = -EFAULT;
+ error = -ENODEV;
}
return_VALUE(error);
}
Index: linux-2.6.15/drivers/acpi/fan.c
===================================================================
--- linux-2.6.15.orig/drivers/acpi/fan.c
+++ linux-2.6.15/drivers/acpi/fan.c
@@ -149,9 +149,7 @@ static int acpi_fan_add_fs(struct acpi_d
S_IFREG | S_IRUGO | S_IWUSR,
acpi_device_dir(device));
if (!entry)
- ACPI_DEBUG_PRINT((ACPI_DB_ERROR,
- "Unable to create '%s' fs entry\n",
- ACPI_FAN_FILE_STATE));
+ return_VALUE(-ENODEV);
else {
entry->proc_fops = &acpi_fan_state_ops;
entry->data = acpi_driver_data(device);
@@ -201,8 +199,7 @@ static int acpi_fan_add(struct acpi_devi
result = acpi_bus_get_power(fan->handle, &state);
if (result) {
- ACPI_DEBUG_PRINT((ACPI_DB_ERROR,
- "Error reading power state\n"));
+ ACPI_ERROR((AE_INFO, "Error reading power state\n"));
goto end;
}
Index: linux-2.6.15/drivers/acpi/hotkey.c
===================================================================
--- linux-2.6.15.orig/drivers/acpi/hotkey.c
+++ linux-2.6.15/drivers/acpi/hotkey.c
@@ -356,9 +356,6 @@ static int create_polling_proc(union acp
proc = create_proc_entry(proc_name, mode, hotkey_proc_dir);
if (!proc) {
- ACPI_DEBUG_PRINT((ACPI_DB_ERROR,
- "Hotkey: Unable to create %s entry\n",
- device->poll_hotkey.poll_method));
return_VALUE(-ENODEV);
} else {
proc->proc_fops = &hotkey_polling_fops;
@@ -769,7 +766,7 @@ static ssize_t hotkey_write_config(struc
if (copy_from_user(config_record, buffer, count)) {
kfree(config_record);
- ACPI_DEBUG_PRINT((ACPI_DB_ERROR, "Invalid data \n"));
+ ACPI_ERROR((AE_INFO, "Invalid data \n"));
return_VALUE(-EINVAL);
}
config_record[count] = 0;
@@ -790,8 +787,7 @@ static ssize_t hotkey_write_config(struc
kfree(bus_method);
kfree(action_handle);
kfree(method);
- ACPI_DEBUG_PRINT((ACPI_DB_ERROR,
- "Invalid data format ret=%d\n", ret));
+ ACPI_ERROR((AE_INFO, "Invalid data format ret=%d\n", ret));
return_VALUE(-EINVAL);
}
@@ -804,7 +800,7 @@ static ssize_t hotkey_write_config(struc
tmp = get_hotkey_by_event(&global_hotkey_list,
internal_event_num);
if (!tmp)
- ACPI_DEBUG_PRINT((ACPI_DB_ERROR, "Invalid key"));
+ ACPI_ERROR((AE_INFO, "Invalid key"));
else
memcpy(key, tmp, sizeof(union acpi_hotkey));
goto cont_cmd;
@@ -826,7 +822,7 @@ static ssize_t hotkey_write_config(struc
else
free_poll_hotkey_buffer(key);
kfree(key);
- ACPI_DEBUG_PRINT((ACPI_DB_ERROR, "Invalid hotkey \n"));
+ ACPI_ERROR((AE_INFO, "Invalid hotkey \n"));
return_VALUE(-EINVAL);
}
@@ -860,7 +856,7 @@ static ssize_t hotkey_write_config(struc
else
free_poll_hotkey_buffer(key);
kfree(key);
- ACPI_DEBUG_PRINT((ACPI_DB_ERROR, "invalid key\n"));
+ ACPI_ERROR((AE_INFO, "invalid key\n"));
return_VALUE(-EINVAL);
}
@@ -905,7 +901,7 @@ static int read_acpi_int(acpi_handle han
val->integer.value = out_obj.integer.value;
val->type = out_obj.type;
} else
- ACPI_DEBUG_PRINT((ACPI_DB_ERROR, "null val pointer"));
+ ACPI_ERROR((AE_INFO, "null val pointer"));
return_VALUE((status == AE_OK)
&& (out_obj.type == ACPI_TYPE_INTEGER));
}
@@ -952,14 +948,14 @@ static ssize_t hotkey_execute_aml_method
if (copy_from_user(arg, buffer, count)) {
kfree(arg);
- ACPI_DEBUG_PRINT((ACPI_DB_ERROR, "Invalid argument 2"));
+ ACPI_ERROR((AE_INFO, "Invalid argument 2"));
return_VALUE(-EINVAL);
}
if (sscanf(arg, "%d:%d:%d:%d", &event, &method_type, &type, &value) !=
4) {
kfree(arg);
- ACPI_DEBUG_PRINT((ACPI_DB_ERROR, "Invalid argument 3"));
+ ACPI_ERROR((AE_INFO, "Invalid argument 3"));
return_VALUE(-EINVAL);
}
kfree(arg);
@@ -985,7 +981,7 @@ static ssize_t hotkey_execute_aml_method
}
} else {
- ACPI_DEBUG_PRINT((ACPI_DB_ERROR, "Not supported"));
+ ACPI_ERROR((AE_INFO, "Not supported"));
return_VALUE(-EINVAL);
}
return_VALUE(count);
@@ -1011,9 +1007,6 @@ static int __init hotkey_init(void)
hotkey_proc_dir = proc_mkdir(HOTKEY_PROC, acpi_root_dir);
if (!hotkey_proc_dir) {
- ACPI_DEBUG_PRINT((ACPI_DB_ERROR,
- "Hotkey: Unable to create %s entry\n",
- HOTKEY_PROC));
return (-ENODEV);
}
hotkey_proc_dir->owner = THIS_MODULE;
@@ -1021,9 +1014,6 @@ static int __init hotkey_init(void)
hotkey_config =
create_proc_entry(HOTKEY_EV_CONFIG, mode, hotkey_proc_dir);
if (!hotkey_config) {
- ACPI_DEBUG_PRINT((ACPI_DB_ERROR,
- "Hotkey: Unable to create %s entry\n",
- HOTKEY_EV_CONFIG));
goto do_fail1;
} else {
hotkey_config->proc_fops = &hotkey_config_fops;
@@ -1036,10 +1026,6 @@ static int __init hotkey_init(void)
hotkey_poll_config =
create_proc_entry(HOTKEY_PL_CONFIG, mode, hotkey_proc_dir);
if (!hotkey_poll_config) {
- ACPI_DEBUG_PRINT((ACPI_DB_ERROR,
- "Hotkey: Unable to create %s entry\n",
- HOTKEY_EV_CONFIG));
-
goto do_fail2;
} else {
hotkey_poll_config->proc_fops = &hotkey_poll_config_fops;
@@ -1051,9 +1037,6 @@ static int __init hotkey_init(void)
hotkey_action = create_proc_entry(HOTKEY_ACTION, mode, hotkey_proc_dir);
if (!hotkey_action) {
- ACPI_DEBUG_PRINT((ACPI_DB_ERROR,
- "Hotkey: Unable to create %s entry\n",
- HOTKEY_ACTION));
goto do_fail3;
} else {
hotkey_action->proc_fops = &hotkey_action_fops;
@@ -1064,9 +1047,6 @@ static int __init hotkey_init(void)
hotkey_info = create_proc_entry(HOTKEY_INFO, mode, hotkey_proc_dir);
if (!hotkey_info) {
- ACPI_DEBUG_PRINT((ACPI_DB_ERROR,
- "Hotkey: Unable to create %s entry\n",
- HOTKEY_INFO));
goto do_fail4;
} else {
hotkey_info->proc_fops = &hotkey_info_fops;
Index: linux-2.6.15/drivers/acpi/osl.c
===================================================================
--- linux-2.6.15.orig/drivers/acpi/osl.c
+++ linux-2.6.15/drivers/acpi/osl.c
@@ -700,7 +700,7 @@ static void acpi_os_execute_deferred(voi
dpc = (struct acpi_os_dpc *)context;
if (!dpc) {
- ACPI_DEBUG_PRINT((ACPI_DB_ERROR, "Invalid (NULL) context.\n"));
+ ACPI_ERROR((AE_INFO, "Invalid (NULL) context.\n"));
return_VOID;
}
@@ -752,8 +752,8 @@ acpi_os_queue_for_execution(u32 priority
INIT_WORK(task, acpi_os_execute_deferred, (void *)dpc);
if (!queue_work(kacpid_wq, task)) {
- ACPI_DEBUG_PRINT((ACPI_DB_ERROR,
- "Call to queue_work() failed.\n"));
+ ACPI_ERROR((AE_INFO,
+ "Call to queue_work() failed.\n"));
kfree(dpc);
status = AE_ERROR;
}
@@ -927,7 +927,7 @@ acpi_status acpi_os_wait_semaphore(acpi_
}
if (ACPI_FAILURE(status)) {
- ACPI_DEBUG_PRINT((ACPI_DB_ERROR,
+ ACPI_WARNING((AE_INFO,
"Failed to acquire semaphore[%p|%d|%d], %s\n",
handle, units, timeout,
acpi_format_exception(status)));
Index: linux-2.6.15/drivers/acpi/pci_bind.c
===================================================================
--- linux-2.6.15.orig/drivers/acpi/pci_bind.c
+++ linux-2.6.15/drivers/acpi/pci_bind.c
@@ -75,17 +75,17 @@ acpi_status acpi_get_pci_id(acpi_handle
result = acpi_bus_get_device(handle, &device);
if (result) {
- ACPI_DEBUG_PRINT((ACPI_DB_ERROR,
- "Invalid ACPI Bus context for device %s\n",
- acpi_device_bid(device)));
+ ACPI_ERROR((AE_INFO,
+ "Invalid ACPI Bus context for device %s\n",
+ acpi_device_bid(device)));
return_ACPI_STATUS(AE_NOT_EXIST);
}
status = acpi_get_data(handle, acpi_pci_data_handler, (void **)&data);
if (ACPI_FAILURE(status) || !data) {
- ACPI_DEBUG_PRINT((ACPI_DB_ERROR,
- "Invalid ACPI-PCI context for device %s\n",
- acpi_device_bid(device)));
+ ACPI_ERROR((AE_INFO,
+ "Invalid ACPI-PCI context for device %s\n",
+ acpi_device_bid(device)));
return_ACPI_STATUS(status);
}
@@ -151,9 +151,9 @@ int acpi_pci_bind(struct acpi_device *de
status = acpi_get_data(device->parent->handle, acpi_pci_data_handler,
(void **)&pdata);
if (ACPI_FAILURE(status) || !pdata || !pdata->bus) {
- ACPI_DEBUG_PRINT((ACPI_DB_ERROR,
- "Invalid ACPI-PCI context for parent device %s\n",
- acpi_device_bid(device->parent)));
+ ACPI_ERROR((AE_INFO,
+ "Invalid ACPI-PCI context for parent device %s\n",
+ acpi_device_bid(device->parent)));
result = -ENODEV;
goto end;
}
@@ -206,10 +206,10 @@ int acpi_pci_bind(struct acpi_device *de
goto end;
}
if (!data->dev->bus) {
- ACPI_DEBUG_PRINT((ACPI_DB_ERROR,
- "Device %02x:%02x:%02x.%02x has invalid 'bus' field\n",
- data->id.segment, data->id.bus,
- data->id.device, data->id.function));
+ ACPI_ERROR((AE_INFO,
+ "Device %02x:%02x:%02x.%02x has invalid 'bus' field\n",
+ data->id.segment, data->id.bus,
+ data->id.device, data->id.function));
result = -ENODEV;
goto end;
}
@@ -237,9 +237,9 @@ int acpi_pci_bind(struct acpi_device *de
*/
status = acpi_attach_data(device->handle, acpi_pci_data_handler, data);
if (ACPI_FAILURE(status)) {
- ACPI_DEBUG_PRINT((ACPI_DB_ERROR,
- "Unable to attach ACPI-PCI context to device %s\n",
- acpi_device_bid(device)));
+ ACPI_ERROR((AE_INFO,
+ "Unable to attach ACPI-PCI context to device %s\n",
+ acpi_device_bid(device)));
result = -ENODEV;
goto end;
}
@@ -301,18 +301,18 @@ int acpi_pci_unbind(struct acpi_device *
acpi_get_data(device->handle, acpi_pci_data_handler,
(void **)&data);
if (ACPI_FAILURE(status)) {
- ACPI_DEBUG_PRINT((ACPI_DB_ERROR,
- "Unable to get data from device %s\n",
- acpi_device_bid(device)));
+ ACPI_ERROR((AE_INFO,
+ "Unable to get data from device %s\n",
+ acpi_device_bid(device)));
result = -ENODEV;
goto end;
}
status = acpi_detach_data(device->handle, acpi_pci_data_handler);
if (ACPI_FAILURE(status)) {
- ACPI_DEBUG_PRINT((ACPI_DB_ERROR,
- "Unable to detach data from device %s\n",
- acpi_device_bid(device)));
+ ACPI_ERROR((AE_INFO,
+ "Unable to detach data from device %s\n",
+ acpi_device_bid(device)));
result = -ENODEV;
goto end;
}
@@ -369,9 +369,9 @@ acpi_pci_bind_root(struct acpi_device *d
status = acpi_attach_data(device->handle, acpi_pci_data_handler, data);
if (ACPI_FAILURE(status)) {
- ACPI_DEBUG_PRINT((ACPI_DB_ERROR,
- "Unable to attach ACPI-PCI context to device %s\n",
- pathname));
+ ACPI_ERROR((AE_INFO,
+ "Unable to attach ACPI-PCI context to device %s\n",
+ pathname));
result = -ENODEV;
goto end;
}
Index: linux-2.6.15/drivers/acpi/pci_irq.c
===================================================================
--- linux-2.6.15.orig/drivers/acpi/pci_irq.c
+++ linux-2.6.15/drivers/acpi/pci_irq.c
@@ -197,8 +197,8 @@ int acpi_pci_irq_add_prt(acpi_handle han
kfree(pathname);
status = acpi_get_irq_routing_table(handle, &buffer);
if (status != AE_BUFFER_OVERFLOW) {
- ACPI_DEBUG_PRINT((ACPI_DB_ERROR, "Error evaluating _PRT [%s]\n",
- acpi_format_exception(status)));
+ ACPI_ERROR((AE_INFO, "Error evaluating _PRT [%s]\n",
+ acpi_format_exception(status)));
return_VALUE(-ENODEV);
}
@@ -211,8 +211,8 @@ int acpi_pci_irq_add_prt(acpi_handle han
status = acpi_get_irq_routing_table(handle, &buffer);
if (ACPI_FAILURE(status)) {
- ACPI_DEBUG_PRINT((ACPI_DB_ERROR, "Error evaluating _PRT [%s]\n",
- acpi_format_exception(status)));
+ ACPI_ERROR((AE_INFO, "Error evaluating _PRT [%s]\n",
+ acpi_format_exception(status)));
kfree(buffer.pointer);
return_VALUE(-ENODEV);
}
@@ -269,8 +269,8 @@ acpi_pci_allocate_irq(struct acpi_prt_en
entry->link.index, triggering,
polarity, link);
if (irq < 0) {
- ACPI_DEBUG_PRINT((ACPI_DB_WARN,
- "Invalid IRQ link routing entry\n"));
+ ACPI_WARNING((AE_INFO,
+ "Invalid IRQ link routing entry\n"));
return_VALUE(-1);
}
} else {
@@ -379,9 +379,8 @@ acpi_pci_irq_derive(struct pci_dev *dev,
}
if (irq < 0) {
- ACPI_DEBUG_PRINT((ACPI_DB_WARN,
- "Unable to derive IRQ for device %s\n",
- pci_name(dev)));
+ ACPI_WARNING((AE_INFO, "Unable to derive IRQ for device %s\n",
+ pci_name(dev)));
return_VALUE(-1);
}
@@ -421,8 +420,7 @@ int acpi_pci_irq_enable(struct pci_dev *
pin--;
if (!dev->bus) {
- ACPI_DEBUG_PRINT((ACPI_DB_ERROR,
- "Invalid (NULL) 'bus' field\n"));
+ ACPI_ERROR((AE_INFO, "Invalid (NULL) 'bus' field\n"));
return_VALUE(-ENODEV);
}
Index: linux-2.6.15/drivers/acpi/pci_link.c
===================================================================
--- linux-2.6.15.orig/drivers/acpi/pci_link.c
+++ linux-2.6.15/drivers/acpi/pci_link.c
@@ -115,7 +115,7 @@ acpi_pci_link_check_possible(struct acpi
{
struct acpi_resource_irq *p = &resource->data.irq;
if (!p || !p->interrupt_count) {
- ACPI_DEBUG_PRINT((ACPI_DB_WARN,
+ ACPI_WARNING((AE_INFO,
"Blank IRQ resource\n"));
return_ACPI_STATUS(AE_OK);
}
@@ -123,7 +123,7 @@ acpi_pci_link_check_possible(struct acpi
(i < p->interrupt_count
&& i < ACPI_PCI_LINK_MAX_POSSIBLE); i++) {
if (!p->interrupts[i]) {
- ACPI_DEBUG_PRINT((ACPI_DB_WARN,
+ ACPI_WARNING((AE_INFO,
"Invalid IRQ %d\n",
p->interrupts[i]));
continue;
@@ -141,7 +141,7 @@ acpi_pci_link_check_possible(struct acpi
struct acpi_resource_extended_irq *p =
&resource->data.extended_irq;
if (!p || !p->interrupt_count) {
- ACPI_DEBUG_PRINT((ACPI_DB_WARN,
+ ACPI_WARNING((AE_INFO,
"Blank EXT IRQ resource\n"));
return_ACPI_STATUS(AE_OK);
}
@@ -149,7 +149,7 @@ acpi_pci_link_check_possible(struct acpi
(i < p->interrupt_count
&& i < ACPI_PCI_LINK_MAX_POSSIBLE); i++) {
if (!p->interrupts[i]) {
- ACPI_DEBUG_PRINT((ACPI_DB_WARN,
+ ACPI_WARNING((AE_INFO,
"Invalid IRQ %d\n",
p->interrupts[i]));
continue;
@@ -163,8 +163,7 @@ acpi_pci_link_check_possible(struct acpi
break;
}
default:
- ACPI_DEBUG_PRINT((ACPI_DB_ERROR,
- "Resource is not an IRQ entry\n"));
+ ACPI_ERROR((AE_INFO, "Resource is not an IRQ entry\n"));
return_ACPI_STATUS(AE_OK);
}
@@ -183,7 +182,7 @@ static int acpi_pci_link_get_possible(st
status = acpi_walk_resources(link->handle, METHOD_NAME__PRS,
acpi_pci_link_check_possible, link);
if (ACPI_FAILURE(status)) {
- ACPI_DEBUG_PRINT((ACPI_DB_ERROR, "Error evaluating _PRS\n"));
+ ACPI_ERROR((AE_INFO, "Error evaluating _PRS\n"));
return_VALUE(-ENODEV);
}
@@ -226,7 +225,7 @@ acpi_pci_link_check_current(struct acpi_
* extended IRQ descriptors must
* return at least 1 IRQ
*/
- ACPI_DEBUG_PRINT((ACPI_DB_WARN,
+ ACPI_WARNING((AE_INFO,
"Blank EXT IRQ resource\n"));
return_ACPI_STATUS(AE_OK);
}
@@ -235,7 +234,7 @@ acpi_pci_link_check_current(struct acpi_
}
break;
default:
- ACPI_DEBUG_PRINT((ACPI_DB_ERROR, "Resource %d isn't an IRQ\n", resource->type));
+ ACPI_ERROR((AE_INFO, "Resource %d isn't an IRQ\n", resource->type));
case ACPI_RESOURCE_TYPE_END_TAG:
return_ACPI_STATUS(AE_OK);
}
@@ -267,8 +266,7 @@ static int acpi_pci_link_get_current(str
/* Query _STA, set link->device->status */
result = acpi_bus_get_status(link->device);
if (result) {
- ACPI_DEBUG_PRINT((ACPI_DB_ERROR,
- "Unable to read status\n"));
+ ACPI_ERROR((AE_INFO, "Unable to read status\n"));
goto end;
}
@@ -285,13 +283,13 @@ static int acpi_pci_link_get_current(str
status = acpi_walk_resources(link->handle, METHOD_NAME__CRS,
acpi_pci_link_check_current, &irq);
if (ACPI_FAILURE(status)) {
- ACPI_DEBUG_PRINT((ACPI_DB_ERROR, "Error evaluating _CRS\n"));
+ ACPI_ERROR((AE_INFO, "Error evaluating _CRS\n"));
result = -ENODEV;
goto end;
}
if (acpi_strict && !irq) {
- ACPI_DEBUG_PRINT((ACPI_DB_ERROR, "_CRS returned 0\n"));
+ ACPI_ERROR((AE_INFO, "_CRS returned 0\n"));
result = -ENODEV;
}
@@ -373,7 +371,7 @@ static int acpi_pci_link_set(struct acpi
/* check for total failure */
if (ACPI_FAILURE(status)) {
- ACPI_DEBUG_PRINT((ACPI_DB_ERROR, "Error evaluating _SRS\n"));
+ ACPI_ERROR((AE_INFO, "Error evaluating _SRS\n"));
result = -ENODEV;
goto end;
}
@@ -381,7 +379,7 @@ static int acpi_pci_link_set(struct acpi
/* Query _STA, set device->status */
result = acpi_bus_get_status(link->device);
if (result) {
- ACPI_DEBUG_PRINT((ACPI_DB_ERROR, "Unable to read status\n"));
+ ACPI_ERROR((AE_INFO, "Unable to read status\n"));
goto end;
}
if (!link->device->status.enabled) {
@@ -500,8 +498,7 @@ int __init acpi_irq_penalty_init(void)
link = list_entry(node, struct acpi_pci_link, node);
if (!link) {
- ACPI_DEBUG_PRINT((ACPI_DB_ERROR,
- "Invalid link context\n"));
+ ACPI_ERROR((AE_INFO, "Invalid link context\n"));
continue;
}
@@ -625,19 +622,19 @@ acpi_pci_link_allocate_irq(acpi_handle h
result = acpi_bus_get_device(handle, &device);
if (result) {
- ACPI_DEBUG_PRINT((ACPI_DB_ERROR, "Invalid link device\n"));
+ ACPI_ERROR((AE_INFO, "Invalid link device\n"));
return_VALUE(-1);
}
link = (struct acpi_pci_link *)acpi_driver_data(device);
if (!link) {
- ACPI_DEBUG_PRINT((ACPI_DB_ERROR, "Invalid link context\n"));
+ ACPI_ERROR((AE_INFO, "Invalid link context\n"));
return_VALUE(-1);
}
/* TBD: Support multiple index (IRQ) entries per Link Device */
if (index) {
- ACPI_DEBUG_PRINT((ACPI_DB_ERROR, "Invalid index %d\n", index));
+ ACPI_ERROR((AE_INFO, "Invalid index %d\n", index));
return_VALUE(-1);
}
@@ -649,7 +646,7 @@ acpi_pci_link_allocate_irq(acpi_handle h
if (!link->irq.active) {
up(&acpi_link_lock);
- ACPI_DEBUG_PRINT((ACPI_DB_ERROR, "Link active IRQ is 0!\n"));
+ ACPI_ERROR((AE_INFO, "Link active IRQ is 0!\n"));
return_VALUE(-1);
}
link->refcnt++;
@@ -681,20 +678,20 @@ int acpi_pci_link_free_irq(acpi_handle h
result = acpi_bus_get_device(handle, &device);
if (result) {
- ACPI_DEBUG_PRINT((ACPI_DB_ERROR, "Invalid link device\n"));
+ ACPI_ERROR((AE_INFO, "Invalid link device\n"));
return_VALUE(-1);
}
link = (struct acpi_pci_link *)acpi_driver_data(device);
if (!link) {
- ACPI_DEBUG_PRINT((ACPI_DB_ERROR, "Invalid link context\n"));
+ ACPI_ERROR((AE_INFO, "Invalid link context\n"));
return_VALUE(-1);
}
down(&acpi_link_lock);
if (!link->irq.initialized) {
up(&acpi_link_lock);
- ACPI_DEBUG_PRINT((ACPI_DB_ERROR, "Link isn't initialized\n"));
+ ACPI_ERROR((AE_INFO, "Link isn't initialized\n"));
return_VALUE(-1);
}
#ifdef FUTURE_USE
@@ -816,8 +813,7 @@ static int irqrouter_resume(struct sys_d
list_for_each(node, &acpi_link.entries) {
link = list_entry(node, struct acpi_pci_link, node);
if (!link) {
- ACPI_DEBUG_PRINT((ACPI_DB_ERROR,
- "Invalid link context\n"));
+ ACPI_ERROR((AE_INFO, "Invalid link context\n"));
continue;
}
acpi_pci_link_resume(link);
Index: linux-2.6.15/drivers/acpi/pci_root.c
===================================================================
--- linux-2.6.15.orig/drivers/acpi/pci_root.c
+++ linux-2.6.15/drivers/acpi/pci_root.c
@@ -198,7 +198,7 @@ static int acpi_pci_root_add(struct acpi
root->id.segment = 0;
break;
default:
- ACPI_DEBUG_PRINT((ACPI_DB_ERROR, "Error evaluating _SEG\n"));
+ ACPI_ERROR((AE_INFO, "Error evaluating _SEG\n"));
result = -ENODEV;
goto end;
}
@@ -219,7 +219,7 @@ static int acpi_pci_root_add(struct acpi
root->id.bus = 0;
break;
default:
- ACPI_DEBUG_PRINT((ACPI_DB_ERROR, "Error evaluating _BBN\n"));
+ ACPI_ERROR((AE_INFO, "Error evaluating _BBN\n"));
result = -ENODEV;
goto end;
}
@@ -231,8 +231,9 @@ static int acpi_pci_root_add(struct acpi
int bus = 0;
acpi_status status;
- ACPI_DEBUG_PRINT((ACPI_DB_ERROR,
- "Wrong _BBN value, please reboot and using option 'pci=noacpi'\n"));
+ ACPI_ERROR((AE_INFO,
+ "Wrong _BBN value, please reboot"
+ " and using option 'pci=noacpi'\n"));
status = try_get_root_bridge_busnr(root->handle, &bus);
if (ACPI_FAILURE(status))
@@ -273,9 +274,9 @@ static int acpi_pci_root_add(struct acpi
*/
root->bus = pci_acpi_scan_root(device, root->id.segment, root->id.bus);
if (!root->bus) {
- ACPI_DEBUG_PRINT((ACPI_DB_ERROR,
- "Bus %04x:%02x not present in PCI namespace\n",
- root->id.segment, root->id.bus));
+ ACPI_ERROR((AE_INFO,
+ "Bus %04x:%02x not present in PCI namespace\n",
+ root->id.segment, root->id.bus));
result = -ENODEV;
goto end;
}
Index: linux-2.6.15/drivers/acpi/power.c
===================================================================
--- linux-2.6.15.orig/drivers/acpi/power.c
+++ linux-2.6.15/drivers/acpi/power.c
@@ -105,8 +105,8 @@ acpi_power_get_context(acpi_handle handl
result = acpi_bus_get_device(handle, &device);
if (result) {
- ACPI_DEBUG_PRINT((ACPI_DB_WARN, "Error getting context [%p]\n",
- handle));
+ ACPI_WARNING((AE_INFO, "Getting context [%p]\n",
+ handle));
return_VALUE(result);
}
@@ -292,7 +292,7 @@ int acpi_enable_wakeup_device_power(stru
for (i = 0; i < dev->wakeup.resources.count; i++) {
ret = acpi_power_on(dev->wakeup.resources.handles[i]);
if (ret) {
- ACPI_DEBUG_PRINT((ACPI_DB_ERROR,
+ ACPI_ERROR((AE_INFO,
"Error transition power state\n"));
dev->wakeup.flags.valid = 0;
return_VALUE(-1);
@@ -302,7 +302,7 @@ int acpi_enable_wakeup_device_power(stru
/* Execute PSW */
status = acpi_evaluate_object(dev->handle, "_PSW", &arg_list, NULL);
if (ACPI_FAILURE(status) && (status != AE_NOT_FOUND)) {
- ACPI_DEBUG_PRINT((ACPI_DB_ERROR, "Error evaluate _PSW\n"));
+ ACPI_ERROR((AE_INFO, "Error evaluate _PSW\n"));
dev->wakeup.flags.valid = 0;
ret = -1;
}
@@ -332,7 +332,7 @@ int acpi_disable_wakeup_device_power(str
/* Execute PSW */
status = acpi_evaluate_object(dev->handle, "_PSW", &arg_list, NULL);
if (ACPI_FAILURE(status) && (status != AE_NOT_FOUND)) {
- ACPI_DEBUG_PRINT((ACPI_DB_ERROR, "Error evaluate _PSW\n"));
+ ACPI_ERROR((AE_INFO, "Error evaluate _PSW\n"));
dev->wakeup.flags.valid = 0;
return_VALUE(-1);
}
@@ -341,7 +341,7 @@ int acpi_disable_wakeup_device_power(str
for (i = 0; i < dev->wakeup.resources.count; i++) {
ret = acpi_power_off_device(dev->wakeup.resources.handles[i]);
if (ret) {
- ACPI_DEBUG_PRINT((ACPI_DB_ERROR,
+ ACPI_ERROR((AE_INFO,
"Error transition power state\n"));
dev->wakeup.flags.valid = 0;
return_VALUE(-1);
@@ -444,9 +444,9 @@ int acpi_power_transition(struct acpi_de
device->power.state = state;
end:
if (result)
- ACPI_DEBUG_PRINT((ACPI_DB_WARN,
- "Error transitioning device [%s] to D%d\n",
- device->pnp.bus_id, state));
+ ACPI_WARNING((AE_INFO,
+ "Transitioning device [%s] to D%d\n",
+ device->pnp.bus_id, state));
return_VALUE(result);
}
@@ -516,9 +516,7 @@ static int acpi_power_add_fs(struct acpi
entry = create_proc_entry(ACPI_POWER_FILE_STATUS,
S_IRUGO, acpi_device_dir(device));
if (!entry)
- ACPI_DEBUG_PRINT((ACPI_DB_ERROR,
- "Unable to create '%s' fs entry\n",
- ACPI_POWER_FILE_STATUS));
+ return_VALUE(-EIO);
else {
entry->proc_fops = &acpi_power_fops;
entry->data = acpi_driver_data(device);
Index: linux-2.6.15/drivers/acpi/processor_core.c
===================================================================
--- linux-2.6.15.orig/drivers/acpi/processor_core.c
+++ linux-2.6.15/drivers/acpi/processor_core.c
@@ -328,8 +328,7 @@ static int acpi_processor_add_fs(struct
entry = create_proc_entry(ACPI_PROCESSOR_FILE_INFO,
S_IRUGO, acpi_device_dir(device));
if (!entry)
- ACPI_DEBUG_PRINT((ACPI_DB_ERROR,
- "Unable to create '%s' fs entry\n",
+ ACPI_ERROR((AE_INFO, "Unable to create '%s' fs entry\n",
ACPI_PROCESSOR_FILE_INFO));
else {
entry->proc_fops = &acpi_processor_info_fops;
@@ -342,9 +341,7 @@ static int acpi_processor_add_fs(struct
S_IFREG | S_IRUGO | S_IWUSR,
acpi_device_dir(device));
if (!entry)
- ACPI_DEBUG_PRINT((ACPI_DB_ERROR,
- "Unable to create '%s' fs entry\n",
- ACPI_PROCESSOR_FILE_THROTTLING));
+ return_VALUE(-EIO);
else {
entry->proc_fops = &acpi_processor_throttling_fops;
entry->data = acpi_driver_data(device);
@@ -356,9 +353,7 @@ static int acpi_processor_add_fs(struct
S_IFREG | S_IRUGO | S_IWUSR,
acpi_device_dir(device));
if (!entry)
- ACPI_DEBUG_PRINT((ACPI_DB_ERROR,
- "Unable to create '%s' fs entry\n",
- ACPI_PROCESSOR_FILE_LIMIT));
+ return_VALUE( -EIO);
else {
entry->proc_fops = &acpi_processor_limit_fops;
entry->data = acpi_driver_data(device);
@@ -459,8 +454,7 @@ static int acpi_processor_get_info(struc
*/
status = acpi_evaluate_object(pr->handle, NULL, NULL, &buffer);
if (ACPI_FAILURE(status)) {
- ACPI_DEBUG_PRINT((ACPI_DB_ERROR,
- "Error evaluating processor object\n"));
+ ACPI_ERROR((AE_INFO, "Error evaluating processor object\n"));
return_VALUE(-ENODEV);
}
@@ -490,9 +484,9 @@ static int acpi_processor_get_info(struc
if (cpu_index >= NR_CPUS) {
if (ACPI_FAILURE
(acpi_processor_hotadd_init(pr->handle, &pr->id))) {
- ACPI_DEBUG_PRINT((ACPI_DB_ERROR,
- "Error getting cpuindex for acpiid 0x%x\n",
- pr->acpi_id));
+ ACPI_ERROR((AE_INFO,
+ "Error getting cpuindex for acpiid 0x%x\n",
+ pr->acpi_id));
return_VALUE(-ENODEV);
}
}
@@ -503,8 +497,8 @@ static int acpi_processor_get_info(struc
if (!object.processor.pblk_address)
ACPI_DEBUG_PRINT((ACPI_DB_INFO, "No PBLK (NULL address)\n"));
else if (object.processor.pblk_length != 6)
- ACPI_DEBUG_PRINT((ACPI_DB_ERROR, "Invalid PBLK length [%d]\n",
- object.processor.pblk_length));
+ ACPI_ERROR((AE_INFO, "Invalid PBLK length [%d]\n",
+ object.processor.pblk_length));
else {
pr->throttling.address = object.processor.pblk_address;
pr->throttling.duty_offset = acpi_fadt.duty_offset;
@@ -558,8 +552,8 @@ static int acpi_processor_start(struct a
*/
if (processor_device_array[pr->id] != NULL &&
processor_device_array[pr->id] != (void *)device) {
- ACPI_DEBUG_PRINT((ACPI_DB_ERROR, "BIOS reporting wrong ACPI id"
- "for the processor\n"));
+ ACPI_WARNING((AE_INFO, "BIOS reporting wrong ACPI id"
+ "for the processor\n"));
return_VALUE(-ENODEV);
}
processor_device_array[pr->id] = (void *)device;
@@ -573,8 +567,8 @@ static int acpi_processor_start(struct a
status = acpi_install_notify_handler(pr->handle, ACPI_DEVICE_NOTIFY,
acpi_processor_notify, pr);
if (ACPI_FAILURE(status)) {
- ACPI_DEBUG_PRINT((ACPI_DB_ERROR,
- "Error installing device notify handler\n"));
+ ACPI_ERROR((AE_INFO,
+ "Error installing device notify handler\n"));
}
/* _PDC call should be done before doing anything else (if reqd.). */
@@ -676,8 +670,8 @@ static int acpi_processor_remove(struct
status = acpi_remove_notify_handler(pr->handle, ACPI_DEVICE_NOTIFY,
acpi_processor_notify);
if (ACPI_FAILURE(status)) {
- ACPI_DEBUG_PRINT((ACPI_DB_ERROR,
- "Error removing notify handler\n"));
+ ACPI_ERROR((AE_INFO,
+ "Error removing notify handler\n"));
}
acpi_processor_remove_fs(device);
@@ -705,8 +699,7 @@ static int is_processor_present(acpi_han
status = acpi_evaluate_integer(handle, "_STA", NULL, &sta);
if (ACPI_FAILURE(status) || !(sta & ACPI_STA_PRESENT)) {
- ACPI_DEBUG_PRINT((ACPI_DB_ERROR,
- "Processor Device is not present\n"));
+ ACPI_WARNING((AE_INFO, "Processor Device is not present\n"));
return_VALUE(0);
}
return_VALUE(1);
@@ -767,15 +760,14 @@ acpi_processor_hotplug_notify(acpi_handl
if (acpi_bus_get_device(handle, &device)) {
result = acpi_processor_device_add(handle, &device);
if (result)
- ACPI_DEBUG_PRINT((ACPI_DB_ERROR,
- "Unable to add the device\n"));
+ ACPI_ERROR((AE_INFO,
+ "Unable to add the device\n"));
break;
}
pr = acpi_driver_data(device);
if (!pr) {
- ACPI_DEBUG_PRINT((ACPI_DB_ERROR,
- "Driver data is NULL\n"));
+ ACPI_ERROR((AE_INFO, "Driver data is NULL\n"));
break;
}
@@ -788,9 +780,8 @@ acpi_processor_hotplug_notify(acpi_handl
if ((!result) && ((pr->id >= 0) && (pr->id < NR_CPUS))) {
kobject_uevent(&device->kobj, KOBJ_ONLINE);
} else {
- ACPI_DEBUG_PRINT((ACPI_DB_ERROR,
- "Device [%s] failed to start\n",
- acpi_device_bid(device)));
+ ACPI_ERROR((AE_INFO, "Device [%s] failed to start\n",
+ acpi_device_bid(device)));
}
break;
case ACPI_NOTIFY_EJECT_REQUEST:
@@ -798,14 +789,14 @@ acpi_processor_hotplug_notify(acpi_handl
"received ACPI_NOTIFY_EJECT_REQUEST\n"));
if (acpi_bus_get_device(handle, &device)) {
- ACPI_DEBUG_PRINT((ACPI_DB_ERROR,
- "Device don't exist, dropping EJECT\n"));
+ ACPI_ERROR((AE_INFO,
+ "Device don't exist, dropping EJECT\n"));
break;
}
pr = acpi_driver_data(device);
if (!pr) {
- ACPI_DEBUG_PRINT((ACPI_DB_ERROR,
- "Driver data is NULL, dropping EJECT\n"));
+ ACPI_ERROR((AE_INFO,
+ "Driver data is NULL, dropping EJECT\n"));
return_VOID;
}
Index: linux-2.6.15/drivers/acpi/processor_idle.c
===================================================================
--- linux-2.6.15.orig/drivers/acpi/processor_idle.c
+++ linux-2.6.15/drivers/acpi/processor_idle.c
@@ -663,8 +663,7 @@ static int acpi_processor_get_power_info
/* There must be at least 2 elements */
if (!cst || (cst->type != ACPI_TYPE_PACKAGE) || cst->package.count < 2) {
- ACPI_DEBUG_PRINT((ACPI_DB_ERROR,
- "not enough elements in _CST\n"));
+ ACPI_ERROR((AE_INFO, "not enough elements in _CST\n"));
status = -EFAULT;
goto end;
}
@@ -673,8 +672,7 @@ static int acpi_processor_get_power_info
/* Validate number of power states. */
if (count < 1 || count != cst->package.count - 1) {
- ACPI_DEBUG_PRINT((ACPI_DB_ERROR,
- "count given by _CST is not valid\n"));
+ ACPI_ERROR((AE_INFO, "count given by _CST is not valid\n"));
status = -EFAULT;
goto end;
}
@@ -1094,8 +1092,8 @@ int acpi_processor_power_init(struct acp
status =
acpi_os_write_port(acpi_fadt.smi_cmd, acpi_fadt.cst_cnt, 8);
if (ACPI_FAILURE(status)) {
- ACPI_DEBUG_PRINT((ACPI_DB_ERROR,
- "Notifying BIOS of _CST ability failed\n"));
+ ACPI_ERROR((AE_INFO,
+ "Notifying BIOS of _CST ability failed\n"));
}
}
@@ -1124,9 +1122,7 @@ int acpi_processor_power_init(struct acp
entry = create_proc_entry(ACPI_PROCESSOR_FILE_POWER,
S_IRUGO, acpi_device_dir(device));
if (!entry)
- ACPI_DEBUG_PRINT((ACPI_DB_ERROR,
- "Unable to create '%s' fs entry\n",
- ACPI_PROCESSOR_FILE_POWER));
+ return -EIO;
else {
entry->proc_fops = &acpi_processor_power_fops;
entry->data = acpi_driver_data(device);
Index: linux-2.6.15/drivers/acpi/processor_perflib.c
===================================================================
--- linux-2.6.15.orig/drivers/acpi/processor_perflib.c
+++ linux-2.6.15/drivers/acpi/processor_perflib.c
@@ -122,7 +122,7 @@ static int acpi_processor_get_platform_l
acpi_processor_ppc_status |= PPC_IN_USE;
if (ACPI_FAILURE(status) && status != AE_NOT_FOUND) {
- ACPI_DEBUG_PRINT((ACPI_DB_ERROR, "Error evaluating _PPC\n"));
+ ACPI_ERROR((AE_INFO, "Error evaluating _PPC\n"));
return_VALUE(-ENODEV);
}
@@ -171,14 +171,14 @@ static int acpi_processor_get_performanc
status = acpi_evaluate_object(pr->handle, "_PCT", NULL, &buffer);
if (ACPI_FAILURE(status)) {
- ACPI_DEBUG_PRINT((ACPI_DB_ERROR, "Error evaluating _PCT\n"));
+ ACPI_ERROR((AE_INFO, "Error evaluating _PCT\n"));
return_VALUE(-ENODEV);
}
pct = (union acpi_object *)buffer.pointer;
if (!pct || (pct->type != ACPI_TYPE_PACKAGE)
|| (pct->package.count != 2)) {
- ACPI_DEBUG_PRINT((ACPI_DB_ERROR, "Invalid _PCT data\n"));
+ ACPI_ERROR((AE_INFO, "Invalid _PCT data\n"));
result = -EFAULT;
goto end;
}
@@ -192,8 +192,7 @@ static int acpi_processor_get_performanc
if ((obj.type != ACPI_TYPE_BUFFER)
|| (obj.buffer.length < sizeof(struct acpi_pct_register))
|| (obj.buffer.pointer == NULL)) {
- ACPI_DEBUG_PRINT((ACPI_DB_ERROR,
- "Invalid _PCT data (control_register)\n"));
+ ACPI_ERROR((AE_INFO, "Invalid _PCT data (control_register)\n"));
result = -EFAULT;
goto end;
}
@@ -209,8 +208,7 @@ static int acpi_processor_get_performanc
if ((obj.type != ACPI_TYPE_BUFFER)
|| (obj.buffer.length < sizeof(struct acpi_pct_register))
|| (obj.buffer.pointer == NULL)) {
- ACPI_DEBUG_PRINT((ACPI_DB_ERROR,
- "Invalid _PCT data (status_register)\n"));
+ ACPI_ERROR((AE_INFO, "Invalid _PCT data (status_register)\n"));
result = -EFAULT;
goto end;
}
@@ -238,13 +236,13 @@ static int acpi_processor_get_performanc
status = acpi_evaluate_object(pr->handle, "_PSS", NULL, &buffer);
if (ACPI_FAILURE(status)) {
- ACPI_DEBUG_PRINT((ACPI_DB_ERROR, "Error evaluating _PSS\n"));
+ ACPI_ERROR((AE_INFO, "Error evaluating _PSS\n"));
return_VALUE(-ENODEV);
}
pss = (union acpi_object *)buffer.pointer;
if (!pss || (pss->type != ACPI_TYPE_PACKAGE)) {
- ACPI_DEBUG_PRINT((ACPI_DB_ERROR, "Invalid _PSS data\n"));
+ ACPI_ERROR((AE_INFO, "Invalid _PSS data\n"));
result = -EFAULT;
goto end;
}
@@ -273,8 +271,7 @@ static int acpi_processor_get_performanc
status = acpi_extract_package(&(pss->package.elements[i]),
&format, &state);
if (ACPI_FAILURE(status)) {
- ACPI_DEBUG_PRINT((ACPI_DB_ERROR,
- "Invalid _PSS data\n"));
+ ACPI_ERROR((AE_INFO, "Invalid _PSS data\n"));
result = -EFAULT;
kfree(pr->performance->states);
goto end;
@@ -290,8 +287,8 @@ static int acpi_processor_get_performanc
(u32) px->control, (u32) px->status));
if (!px->core_frequency) {
- ACPI_DEBUG_PRINT((ACPI_DB_ERROR,
- "Invalid _PSS data: freq is zero\n"));
+ ACPI_ERROR((AE_INFO,
+ "Invalid _PSS data: freq is zero\n"));
result = -EFAULT;
kfree(pr->performance->states);
goto end;
@@ -386,10 +383,10 @@ int acpi_processor_notify_smm(struct mod
status = acpi_os_write_port(acpi_fadt.smi_cmd,
(u32) acpi_fadt.pstate_cnt, 8);
if (ACPI_FAILURE(status)) {
- ACPI_DEBUG_PRINT((ACPI_DB_ERROR,
- "Failed to write pstate_cnt [0x%x] to "
- "smi_cmd [0x%x]\n", acpi_fadt.pstate_cnt,
- acpi_fadt.smi_cmd));
+ ACPI_ERROR((AE_INFO,
+ "Failed to write pstate_cnt [0x%x] to "
+ "smi_cmd [0x%x]\n", acpi_fadt.pstate_cnt,
+ acpi_fadt.smi_cmd));
module_put(calling_module);
return_VALUE(status);
}
@@ -513,11 +510,7 @@ static void acpi_cpufreq_add_file(struct
entry = create_proc_entry(ACPI_PROCESSOR_FILE_PERFORMANCE,
S_IFREG | S_IRUGO | S_IWUSR,
acpi_device_dir(device));
- if (!entry)
- ACPI_DEBUG_PRINT((ACPI_DB_ERROR,
- "Unable to create '%s' fs entry\n",
- ACPI_PROCESSOR_FILE_PERFORMANCE));
- else {
+ if (entry)
acpi_processor_perf_fops.write = acpi_processor_write_performance;
entry->proc_fops = &acpi_processor_perf_fops;
entry->data = acpi_driver_data(device);
Index: linux-2.6.15/drivers/acpi/processor_thermal.c
===================================================================
--- linux-2.6.15.orig/drivers/acpi/processor_thermal.c
+++ linux-2.6.15/drivers/acpi/processor_thermal.c
@@ -82,7 +82,7 @@ static int acpi_processor_apply_limit(st
end:
if (result)
- ACPI_DEBUG_PRINT((ACPI_DB_ERROR, "Unable to set limit\n"));
+ ACPI_ERROR((AE_INFO, "Unable to set limit\n"));
return_VALUE(result);
}
@@ -289,7 +289,7 @@ int acpi_processor_set_thermal_limit(acp
result = acpi_processor_apply_limit(pr);
if (result)
- ACPI_DEBUG_PRINT((ACPI_DB_ERROR,
+ ACPI_ERROR((AE_INFO,
"Unable to set thermal limit\n"));
ACPI_DEBUG_PRINT((ACPI_DB_INFO, "Thermal limit now (P%d:T%d)\n",
@@ -362,25 +362,23 @@ static ssize_t acpi_processor_write_limi
ACPI_FUNCTION_TRACE("acpi_processor_write_limit");
if (!pr || (count > sizeof(limit_string) - 1)) {
- ACPI_DEBUG_PRINT((ACPI_DB_ERROR, "Invalid argument\n"));
return_VALUE(-EINVAL);
}
if (copy_from_user(limit_string, buffer, count)) {
- ACPI_DEBUG_PRINT((ACPI_DB_ERROR, "Invalid data\n"));
return_VALUE(-EFAULT);
}
limit_string[count] = '\0';
if (sscanf(limit_string, "%d:%d", &px, &tx) != 2) {
- ACPI_DEBUG_PRINT((ACPI_DB_ERROR, "Invalid data format\n"));
+ ACPI_ERROR((AE_INFO, "Invalid data format\n"));
return_VALUE(-EINVAL);
}
if (pr->flags.throttling) {
if ((tx < 0) || (tx > (pr->throttling.state_count - 1))) {
- ACPI_DEBUG_PRINT((ACPI_DB_ERROR, "Invalid tx\n"));
+ ACPI_ERROR((AE_INFO, "Invalid tx\n"));
return_VALUE(-EINVAL);
}
pr->limit.user.tx = tx;
Index: linux-2.6.15/drivers/acpi/processor_throttling.c
===================================================================
--- linux-2.6.15.orig/drivers/acpi/processor_throttling.c
+++ linux-2.6.15/drivers/acpi/processor_throttling.c
@@ -196,7 +196,7 @@ int acpi_processor_get_throttling_info(s
}
/* TBD: Support duty_cycle values that span bit 4. */
else if ((pr->throttling.duty_offset + pr->throttling.duty_width) > 4) {
- ACPI_DEBUG_PRINT((ACPI_DB_WARN, "duty_cycle spans bit 4\n"));
+ ACPI_WARNING((AE_INFO, "duty_cycle spans bit 4\n"));
return_VALUE(0);
}
Index: linux-2.6.15/drivers/acpi/scan.c
===================================================================
--- linux-2.6.15.orig/drivers/acpi/scan.c
+++ linux-2.6.15/drivers/acpi/scan.c
@@ -321,15 +321,14 @@ static int acpi_bus_get_wakeup_device_fl
/* _PRW */
status = acpi_evaluate_object(device->handle, "_PRW", NULL, &buffer);
if (ACPI_FAILURE(status)) {
- ACPI_DEBUG_PRINT((ACPI_DB_ERROR, "Error evaluating _PRW\n"));
+ ACPI_ERROR((AE_INFO, "Error evaluating _PRW\n"));
goto end;
}
package = (union acpi_object *)buffer.pointer;
status = acpi_bus_extract_wakeup_device_power_package(device, package);
if (ACPI_FAILURE(status)) {
- ACPI_DEBUG_PRINT((ACPI_DB_ERROR,
- "Error extracting _PRW package\n"));
+ ACPI_ERROR((AE_INFO, "Error extracting _PRW package\n"));
goto end;
}
@@ -1001,7 +1000,7 @@ acpi_add_single_object(struct acpi_devic
device = kmalloc(sizeof(struct acpi_device), GFP_KERNEL);
if (!device) {
- ACPI_DEBUG_PRINT((ACPI_DB_ERROR, "Memory allocation error\n"));
+ ACPI_ERROR((AE_INFO, "Memory allocation error\n"));
return_VALUE(-ENOMEM);
}
memset(device, 0, sizeof(struct acpi_device));
Index: linux-2.6.15/drivers/acpi/thermal.c
===================================================================
--- linux-2.6.15.orig/drivers/acpi/thermal.c
+++ linux-2.6.15/drivers/acpi/thermal.c
@@ -323,7 +323,7 @@ static int acpi_thermal_get_trip_points(
&tz->trips.critical.temperature);
if (ACPI_FAILURE(status)) {
tz->trips.critical.flags.valid = 0;
- ACPI_DEBUG_PRINT((ACPI_DB_ERROR, "No critical threshold\n"));
+ ACPI_ERROR((AE_INFO, "No critical threshold\n"));
return_VALUE(-ENODEV);
} else {
tz->trips.critical.flags.valid = 1;
@@ -382,8 +382,7 @@ static int acpi_thermal_get_trip_points(
tz->trips.passive.flags.valid = 0;
if (!tz->trips.passive.flags.valid)
- ACPI_DEBUG_PRINT((ACPI_DB_WARN,
- "Invalid passive threshold\n"));
+ ACPI_WARNING((AE_INFO, "Invalid passive threshold\n"));
else
ACPI_DEBUG_PRINT((ACPI_DB_INFO,
"Found passive threshold [%lu]\n",
@@ -412,9 +411,8 @@ static int acpi_thermal_get_trip_points(
"Found active threshold [%d]:[%lu]\n",
i, tz->trips.active[i].temperature));
} else
- ACPI_DEBUG_PRINT((ACPI_DB_ERROR,
- "Invalid active threshold [%d]\n",
- i));
+ ACPI_ERROR((AE_INFO,
+ "Invalid active threshold [%d]\n", i));
}
return_VALUE(0);
@@ -469,7 +467,7 @@ static int acpi_thermal_critical(struct
return_VALUE(-EINVAL);
if (tz->temperature >= tz->trips.critical.temperature) {
- ACPI_DEBUG_PRINT((ACPI_DB_WARN, "Critical trip point\n"));
+ ACPI_WARNING((AE_INFO, "Critical trip point\n"));
tz->trips.critical.flags.enabled = 1;
} else if (tz->trips.critical.flags.enabled)
tz->trips.critical.flags.enabled = 0;
@@ -500,7 +498,7 @@ static int acpi_thermal_hot(struct acpi_
return_VALUE(-EINVAL);
if (tz->temperature >= tz->trips.hot.temperature) {
- ACPI_DEBUG_PRINT((ACPI_DB_WARN, "Hot trip point\n"));
+ ACPI_WARNING((AE_INFO, "Hot trip point\n"));
tz->trips.hot.flags.enabled = 1;
} else if (tz->trips.hot.flags.enabled)
tz->trips.hot.flags.enabled = 0;
@@ -640,10 +638,10 @@ static void acpi_thermal_active(struct a
handles[j],
ACPI_STATE_D0);
if (result) {
- ACPI_DEBUG_PRINT((ACPI_DB_WARN,
- "Unable to turn cooling device [%p] 'on'\n",
- active->devices.
- handles[j]));
+ ACPI_WARNING((AE_INFO,
+ "Unable to turn cooling device [%p] 'on'\n",
+ active->devices.
+ handles[j]));
continue;
}
active->flags.enabled = 1;
@@ -665,9 +663,9 @@ static void acpi_thermal_active(struct a
result = acpi_bus_set_power(active->devices.handles[j],
ACPI_STATE_D3);
if (result) {
- ACPI_DEBUG_PRINT((ACPI_DB_WARN,
- "Unable to turn cooling device [%p] 'off'\n",
- active->devices.handles[j]));
+ ACPI_WARNING((AE_INFO,
+ "Unable to turn cooling device [%p] 'off'\n",
+ active->devices.handles[j]));
continue;
}
active->flags.enabled = 0;
@@ -699,7 +697,7 @@ static void acpi_thermal_check(void *dat
ACPI_FUNCTION_TRACE("acpi_thermal_check");
if (!tz) {
- ACPI_DEBUG_PRINT((ACPI_DB_ERROR, "Invalid (NULL) context.\n"));
+ ACPI_ERROR((AE_INFO, "Invalid (NULL) context.\n"));
return_VOID;
}
@@ -946,13 +944,11 @@ acpi_thermal_write_trip_points(struct fi
return_VALUE(-ENOMEM);
if (!tz || (count > ACPI_THERMAL_MAX_LIMIT_STR_LEN - 1)) {
- ACPI_DEBUG_PRINT((ACPI_DB_ERROR, "Invalid argument\n"));
count = -EINVAL;
goto end;
}
if (copy_from_user(limit_string, buffer, count)) {
- ACPI_DEBUG_PRINT((ACPI_DB_ERROR, "Invalid data\n"));
count = -EFAULT;
goto end;
}
@@ -965,7 +961,6 @@ acpi_thermal_write_trip_points(struct fi
&active[5], &active[6], &active[7], &active[8],
&active[9]);
if (!(num >= 5 && num < (ACPI_THERMAL_MAX_ACTIVE + 3))) {
- ACPI_DEBUG_PRINT((ACPI_DB_ERROR, "Invalid data format\n"));
count = -EINVAL;
goto end;
}
@@ -1125,9 +1120,7 @@ static int acpi_thermal_add_fs(struct ac
entry = create_proc_entry(ACPI_THERMAL_FILE_STATE,
S_IRUGO, acpi_device_dir(device));
if (!entry)
- ACPI_DEBUG_PRINT((ACPI_DB_ERROR,
- "Unable to create '%s' fs entry\n",
- ACPI_THERMAL_FILE_STATE));
+ return_VALUE(-ENODEV);
else {
entry->proc_fops = &acpi_thermal_state_fops;
entry->data = acpi_driver_data(device);
@@ -1138,9 +1131,7 @@ static int acpi_thermal_add_fs(struct ac
entry = create_proc_entry(ACPI_THERMAL_FILE_TEMPERATURE,
S_IRUGO, acpi_device_dir(device));
if (!entry)
- ACPI_DEBUG_PRINT((ACPI_DB_ERROR,
- "Unable to create '%s' fs entry\n",
- ACPI_THERMAL_FILE_TEMPERATURE));
+ return_VALUE(-ENODEV);
else {
entry->proc_fops = &acpi_thermal_temp_fops;
entry->data = acpi_driver_data(device);
@@ -1152,9 +1143,7 @@ static int acpi_thermal_add_fs(struct ac
S_IFREG | S_IRUGO | S_IWUSR,
acpi_device_dir(device));
if (!entry)
- ACPI_DEBUG_PRINT((ACPI_DB_ERROR,
- "Unable to create '%s' fs entry\n",
- ACPI_THERMAL_FILE_TRIP_POINTS));
+ return_VALUE(-ENODEV);
else {
entry->proc_fops = &acpi_thermal_trip_fops;
entry->data = acpi_driver_data(device);
@@ -1166,9 +1155,7 @@ static int acpi_thermal_add_fs(struct ac
S_IFREG | S_IRUGO | S_IWUSR,
acpi_device_dir(device));
if (!entry)
- ACPI_DEBUG_PRINT((ACPI_DB_ERROR,
- "Unable to create '%s' fs entry\n",
- ACPI_THERMAL_FILE_COOLING_MODE));
+ return_VALUE(-ENODEV);
else {
entry->proc_fops = &acpi_thermal_cooling_fops;
entry->data = acpi_driver_data(device);
@@ -1180,9 +1167,7 @@ static int acpi_thermal_add_fs(struct ac
S_IFREG | S_IRUGO | S_IWUSR,
acpi_device_dir(device));
if (!entry)
- ACPI_DEBUG_PRINT((ACPI_DB_ERROR,
- "Unable to create '%s' fs entry\n",
- ACPI_THERMAL_FILE_POLLING_FREQ));
+ return_VALUE(-ENODEV);
else {
entry->proc_fops = &acpi_thermal_polling_fops;
entry->data = acpi_driver_data(device);
@@ -1352,8 +1337,6 @@ static int acpi_thermal_add(struct acpi_
ACPI_DEVICE_NOTIFY,
acpi_thermal_notify, tz);
if (ACPI_FAILURE(status)) {
- ACPI_DEBUG_PRINT((ACPI_DB_ERROR,
- "Error installing notify handler\n"));
result = -ENODEV;
goto end;
}
@@ -1395,9 +1378,6 @@ static int acpi_thermal_remove(struct ac
status = acpi_remove_notify_handler(tz->handle,
ACPI_DEVICE_NOTIFY,
acpi_thermal_notify);
- if (ACPI_FAILURE(status))
- ACPI_DEBUG_PRINT((ACPI_DB_ERROR,
- "Error removing notify handler\n"));
/* Terminate policy */
if (tz->trips.passive.flags.valid && tz->trips.passive.flags.enabled) {
Index: linux-2.6.15/drivers/acpi/utils.c
===================================================================
--- linux-2.6.15.orig/drivers/acpi/utils.c
+++ linux-2.6.15/drivers/acpi/utils.c
@@ -62,26 +62,25 @@ acpi_extract_package(union acpi_object *
if (!package || (package->type != ACPI_TYPE_PACKAGE)
|| (package->package.count < 1)) {
- ACPI_DEBUG_PRINT((ACPI_DB_WARN,
- "Invalid 'package' argument\n"));
+ ACPI_WARNING((AE_INFO, "Invalid 'package' argument\n"));
return_ACPI_STATUS(AE_BAD_PARAMETER);
}
if (!format || !format->pointer || (format->length < 1)) {
- ACPI_DEBUG_PRINT((ACPI_DB_WARN, "Invalid 'format' argument\n"));
+ ACPI_WARNING((AE_INFO, "Invalid 'format' argument\n"));
return_ACPI_STATUS(AE_BAD_PARAMETER);
}
if (!buffer) {
- ACPI_DEBUG_PRINT((ACPI_DB_WARN, "Invalid 'buffer' argument\n"));
+ ACPI_WARNING((AE_INFO, "Invalid 'buffer' argument\n"));
return_ACPI_STATUS(AE_BAD_PARAMETER);
}
format_count = (format->length / sizeof(char)) - 1;
if (format_count > package->package.count) {
- ACPI_DEBUG_PRINT((ACPI_DB_WARN,
- "Format specifies more objects [%d] than exist in package [%d].",
- format_count, package->package.count));
+ ACPI_WARNING((AE_INFO, "Format specifies more objects [%d]"
+ " than exist in package [%d].",
+ format_count, package->package.count));
return_ACPI_STATUS(AE_BAD_DATA);
}
@@ -113,9 +112,10 @@ acpi_extract_package(union acpi_object *
tail_offset += sizeof(char *);
break;
default:
- ACPI_DEBUG_PRINT((ACPI_DB_WARN,
- "Invalid package element [%d]: got number, expecing [%c].\n",
- i, format_string[i]));
+ ACPI_WARNING((AE_INFO, "Invalid package element"
+ " [%d]: got number, expecing"
+ " [%c].\n",
+ i, format_string[i]));
return_ACPI_STATUS(AE_BAD_DATA);
break;
}
@@ -138,9 +138,10 @@ acpi_extract_package(union acpi_object *
tail_offset += sizeof(u8 *);
break;
default:
- ACPI_DEBUG_PRINT((ACPI_DB_WARN,
- "Invalid package element [%d] got string/buffer, expecing [%c].\n",
- i, format_string[i]));
+ ACPI_WARNING((AE_INFO, "Invalid package element"
+ " [%d] got string/buffer,"
+ " expecing [%c].\n",
+ i, format_string[i]));
return_ACPI_STATUS(AE_BAD_DATA);
break;
}
@@ -323,7 +324,7 @@ acpi_evaluate_string(acpi_handle handle,
*data = kmalloc(element->string.length + 1, GFP_KERNEL);
if (!data) {
- ACPI_DEBUG_PRINT((ACPI_DB_ERROR, "Memory allocation error\n"));
+ ACPI_ERROR((AE_INFO, "Memory allocation error\n"));
return_VALUE(-ENOMEM);
}
memset(*data, 0, element->string.length + 1);
@@ -365,25 +366,22 @@ acpi_evaluate_reference(acpi_handle hand
package = (union acpi_object *)buffer.pointer;
if ((buffer.length == 0) || !package) {
- ACPI_DEBUG_PRINT((ACPI_DB_ERROR,
- "No return object (len %X ptr %p)\n",
- (unsigned)buffer.length, package));
+ ACPI_ERROR((AE_INFO, "No return object (len %X ptr %p)\n",
+ (unsigned)buffer.length, package));
status = AE_BAD_DATA;
acpi_util_eval_error(handle, pathname, status);
goto end;
}
if (package->type != ACPI_TYPE_PACKAGE) {
- ACPI_DEBUG_PRINT((ACPI_DB_ERROR,
- "Expecting a [Package], found type %X\n",
- package->type));
+ ACPI_ERROR((AE_INFO, "Expecting a [Package], found type %X\n",
+ package->type));
status = AE_BAD_DATA;
acpi_util_eval_error(handle, pathname, status);
goto end;
}
if (!package->package.count) {
- ACPI_DEBUG_PRINT((ACPI_DB_ERROR,
- "[Package] has zero elements (%p)\n",
- package));
+ ACPI_ERROR((AE_INFO, "[Package] has zero elements (%p)\n",
+ package));
status = AE_BAD_DATA;
acpi_util_eval_error(handle, pathname, status);
goto end;
@@ -402,9 +400,9 @@ acpi_evaluate_reference(acpi_handle hand
if (element->type != ACPI_TYPE_ANY) {
status = AE_BAD_DATA;
- ACPI_DEBUG_PRINT((ACPI_DB_ERROR,
- "Expecting a [Reference] package element, found type %X\n",
- element->type));
+ ACPI_ERROR((AE_INFO,
+ "Expecting a [Reference] package element, found type %X\n",
+ element->type));
acpi_util_eval_error(handle, pathname, status);
break;
}
Index: linux-2.6.15/drivers/acpi/video.c
===================================================================
--- linux-2.6.15.orig/drivers/acpi/video.c
+++ linux-2.6.15/drivers/acpi/video.c
@@ -324,7 +324,7 @@ acpi_video_device_lcd_query_levels(struc
return_VALUE(status);
obj = (union acpi_object *)buffer.pointer;
if (!obj && (obj->type != ACPI_TYPE_PACKAGE)) {
- ACPI_DEBUG_PRINT((ACPI_DB_ERROR, "Invalid _BCL data\n"));
+ ACPI_ERROR((AE_INFO, "Invalid _BCL data\n"));
status = -EFAULT;
goto err;
}
@@ -399,7 +399,7 @@ acpi_video_device_EDID(struct acpi_video
if (obj && obj->type == ACPI_TYPE_BUFFER)
*edid = obj;
else {
- ACPI_DEBUG_PRINT((ACPI_DB_ERROR, "Invalid _DDC data\n"));
+ ACPI_ERROR((AE_INFO, "Invalid _DDC data\n"));
status = -EFAULT;
kfree(obj);
}
@@ -560,8 +560,7 @@ static void acpi_video_device_find_cap(s
o = (union acpi_object *)&obj->package.
elements[i];
if (o->type != ACPI_TYPE_INTEGER) {
- ACPI_DEBUG_PRINT((ACPI_DB_ERROR,
- "Invalid data\n"));
+ ACPI_ERROR((AE_INFO, "Invalid data\n"));
continue;
}
br->levels[count] = (u32) o->integer.value;
@@ -904,8 +903,7 @@ static int acpi_video_device_add_fs(stru
/* 'info' [R] */
entry = create_proc_entry("info", S_IRUGO, acpi_device_dir(device));
if (!entry)
- ACPI_DEBUG_PRINT((ACPI_DB_ERROR,
- "Unable to create 'info' fs entry\n"));
+ return_VALUE(-ENODEV);
else {
entry->proc_fops = &acpi_video_device_info_fops;
entry->data = acpi_driver_data(device);
@@ -917,8 +915,7 @@ static int acpi_video_device_add_fs(stru
create_proc_entry("state", S_IFREG | S_IRUGO | S_IWUSR,
acpi_device_dir(device));
if (!entry)
- ACPI_DEBUG_PRINT((ACPI_DB_ERROR,
- "Unable to create 'state' fs entry\n"));
+ return_VALUE(-ENODEV);
else {
acpi_video_device_state_fops.write = acpi_video_device_write_state;
entry->proc_fops = &acpi_video_device_state_fops;
@@ -931,8 +928,7 @@ static int acpi_video_device_add_fs(stru
create_proc_entry("brightness", S_IFREG | S_IRUGO | S_IWUSR,
acpi_device_dir(device));
if (!entry)
- ACPI_DEBUG_PRINT((ACPI_DB_ERROR,
- "Unable to create 'brightness' fs entry\n"));
+ return_VALUE(-ENODEV);
else {
acpi_video_device_brightness_fops.write = acpi_video_device_write_brightness;
entry->proc_fops = &acpi_video_device_brightness_fops;
@@ -943,8 +939,7 @@ static int acpi_video_device_add_fs(stru
/* 'EDID' [R] */
entry = create_proc_entry("EDID", S_IRUGO, acpi_device_dir(device));
if (!entry)
- ACPI_DEBUG_PRINT((ACPI_DB_ERROR,
- "Unable to create 'brightness' fs entry\n"));
+ return_VALUE(-ENODEV);
else {
entry->proc_fops = &acpi_video_device_EDID_fops;
entry->data = acpi_driver_data(device);
@@ -1200,8 +1195,7 @@ static int acpi_video_bus_add_fs(struct
/* 'info' [R] */
entry = create_proc_entry("info", S_IRUGO, acpi_device_dir(device));
if (!entry)
- ACPI_DEBUG_PRINT((ACPI_DB_ERROR,
- "Unable to create 'info' fs entry\n"));
+ return_VALUE(-ENODEV);
else {
entry->proc_fops = &acpi_video_bus_info_fops;
entry->data = acpi_driver_data(device);
@@ -1211,8 +1205,7 @@ static int acpi_video_bus_add_fs(struct
/* 'ROM' [R] */
entry = create_proc_entry("ROM", S_IRUGO, acpi_device_dir(device));
if (!entry)
- ACPI_DEBUG_PRINT((ACPI_DB_ERROR,
- "Unable to create 'ROM' fs entry\n"));
+ return_VALUE(-ENODEV);
else {
entry->proc_fops = &acpi_video_bus_ROM_fops;
entry->data = acpi_driver_data(device);
@@ -1223,8 +1216,7 @@ static int acpi_video_bus_add_fs(struct
entry =
create_proc_entry("POST_info", S_IRUGO, acpi_device_dir(device));
if (!entry)
- ACPI_DEBUG_PRINT((ACPI_DB_ERROR,
- "Unable to create 'POST_info' fs entry\n"));
+ return_VALUE(-ENODEV);
else {
entry->proc_fops = &acpi_video_bus_POST_info_fops;
entry->data = acpi_driver_data(device);
@@ -1236,8 +1228,7 @@ static int acpi_video_bus_add_fs(struct
create_proc_entry("POST", S_IFREG | S_IRUGO | S_IRUSR,
acpi_device_dir(device));
if (!entry)
- ACPI_DEBUG_PRINT((ACPI_DB_ERROR,
- "Unable to create 'POST' fs entry\n"));
+ return_VALUE(-ENODEV);
else {
acpi_video_bus_POST_fops.write = acpi_video_bus_write_POST;
entry->proc_fops = &acpi_video_bus_POST_fops;
@@ -1250,8 +1241,7 @@ static int acpi_video_bus_add_fs(struct
create_proc_entry("DOS", S_IFREG | S_IRUGO | S_IRUSR,
acpi_device_dir(device));
if (!entry)
- ACPI_DEBUG_PRINT((ACPI_DB_ERROR,
- "Unable to create 'DOS' fs entry\n"));
+ return_VALUE(-ENODEV);
else {
acpi_video_bus_DOS_fops.write = acpi_video_bus_write_DOS;
entry->proc_fops = &acpi_video_bus_DOS_fops;
@@ -1344,8 +1334,6 @@ acpi_video_bus_get_one_device(struct acp
acpi_video_device_notify,
data);
if (ACPI_FAILURE(status)) {
- ACPI_DEBUG_PRINT((ACPI_DB_ERROR,
- "Error installing notify handler\n"));
result = -ENODEV;
goto end;
}
@@ -1444,13 +1432,13 @@ static int acpi_video_device_enumerate(s
status = acpi_evaluate_object(video->handle, "_DOD", NULL, &buffer);
if (!ACPI_SUCCESS(status)) {
- ACPI_DEBUG_PRINT((ACPI_DB_ERROR, "Error evaluating _DOD\n"));
+ ACPI_ERROR((AE_INFO, "Error evaluating _DOD\n"));
return_VALUE(status);
}
dod = (union acpi_object *)buffer.pointer;
if (!dod || (dod->type != ACPI_TYPE_PACKAGE)) {
- ACPI_DEBUG_PRINT((ACPI_DB_ERROR, "Invalid _DOD data\n"));
+ ACPI_ERROR((AE_INFO, "Invalid _DOD data\n"));
status = -EFAULT;
goto out;
}
@@ -1474,8 +1462,7 @@ static int acpi_video_device_enumerate(s
obj = (union acpi_object *)&dod->package.elements[i];
if (obj->type != ACPI_TYPE_INTEGER) {
- ACPI_DEBUG_PRINT((ACPI_DB_ERROR,
- "Invalid _DOD data\n"));
+ ACPI_ERROR((AE_INFO, "Invalid _DOD data\n"));
active_device_list[i].value.int_val =
ACPI_VIDEO_HEAD_INVALID;
}
@@ -1589,8 +1576,7 @@ acpi_video_bus_get_devices(struct acpi_v
status = acpi_video_bus_get_one_device(dev, video);
if (ACPI_FAILURE(status)) {
- ACPI_DEBUG_PRINT((ACPI_DB_ERROR,
- "Cant attach device\n"));
+ ACPI_ERROR((AE_INFO, "Cant attach device\n"));
continue;
}
@@ -1618,9 +1604,6 @@ static int acpi_video_bus_put_one_device
status = acpi_remove_notify_handler(device->handle,
ACPI_DEVICE_NOTIFY,
acpi_video_device_notify);
- if (ACPI_FAILURE(status))
- ACPI_DEBUG_PRINT((ACPI_DB_ERROR,
- "Error removing notify handler\n"));
return_VALUE(0);
}
@@ -1783,8 +1766,6 @@ static int acpi_video_bus_add(struct acp
ACPI_DEVICE_NOTIFY,
acpi_video_bus_notify, video);
if (ACPI_FAILURE(status)) {
- ACPI_DEBUG_PRINT((ACPI_DB_ERROR,
- "Error installing notify handler\n"));
result = -ENODEV;
goto end;
}
@@ -1821,9 +1802,6 @@ static int acpi_video_bus_remove(struct
status = acpi_remove_notify_handler(video->handle,
ACPI_DEVICE_NOTIFY,
acpi_video_bus_notify);
- if (ACPI_FAILURE(status))
- ACPI_DEBUG_PRINT((ACPI_DB_ERROR,
- "Error removing notify handler\n"));
acpi_video_bus_put_devices(video);
acpi_video_bus_remove_fs(device);
Index: linux-2.6.15/drivers/acpi/system.c
===================================================================
--- linux-2.6.15.orig/drivers/acpi/system.c
+++ linux-2.6.15/drivers/acpi/system.c
@@ -161,9 +161,6 @@ static int __init acpi_system_init(void)
return_VALUE(error);
Error:
- ACPI_DEBUG_PRINT((ACPI_DB_ERROR,
- "Unable to create '%s' proc fs entry\n", name));
-
remove_proc_entry(ACPI_SYSTEM_FILE_FADT, acpi_root_dir);
remove_proc_entry(ACPI_SYSTEM_FILE_DSDT, acpi_root_dir);
remove_proc_entry(ACPI_SYSTEM_FILE_INFO, acpi_root_dir);
^ permalink raw reply [flat|nested] 8+ messages in thread
* RE: Convert PRINT_DEBUG(DB_ERROR/WARNING,...) to ACPI_ERROR/WARNING
@ 2006-02-03 21:41 Moore, Robert
2006-02-06 20:57 ` Thomas Renninger
0 siblings, 1 reply; 8+ messages in thread
From: Moore, Robert @ 2006-02-03 21:41 UTC (permalink / raw)
To: Thomas Renninger, ACPI-ML, Brown, Len
BTW,
The implementations of ACPI_ERROR/WARNING/INFO automatically insert a
newline at the end of the message, along with the ACPI version.
+ ACPI_ERROR((AE_INFO, "Error reading AC Adapter
state\n"));
So, you will probably want to remove the \n at the end of each of these.
With hundreds of such messages, this actually saves an "interesting"
amount of memory.
Also, I created the ACPI_EXCEPTION interface that will decode and
display the ACPI_STATUS code; you may want to use this instead of
ACPI_ERROR is some cases.
Bob
> -----Original Message-----
> From: linux-acpi-owner@vger.kernel.org [mailto:linux-acpi-
> owner@vger.kernel.org] On Behalf Of Thomas Renninger
> Sent: Friday, February 03, 2006 1:20 PM
> To: ACPI-ML; Brown, Len
> Subject: Convert PRINT_DEBUG(DB_ERROR/WARNING,...) to
ACPI_ERROR/WARNING
>
> This patch lets all ACPI errors and warnings be printed
> even ACPI_DEBUG is disabled.
>
> I removed all "proc entry could not be created" messages
> and returned -ENODEV.
>
> I also removed all "Error removing/adding notify handler" messages.
> I will provide a second patch (ACPICA) and add a message to
> the add/remove_handler function itself.
>
> This should give the "non kernel debuggers" a chance to figure out
> why their xy hardware does not work without the need of recompiling
> kernels. And should provide as with better bug reports...
>
> This one is on top of Len's latest 2.6.16-rc1/2 push.
>
> Thomas
^ permalink raw reply [flat|nested] 8+ messages in thread
* Re: Convert PRINT_DEBUG(DB_ERROR/WARNING,...) to ACPI_ERROR/WARNING
2006-02-03 21:41 Moore, Robert
@ 2006-02-06 20:57 ` Thomas Renninger
0 siblings, 0 replies; 8+ messages in thread
From: Thomas Renninger @ 2006-02-06 20:57 UTC (permalink / raw)
To: Moore, Robert; +Cc: ACPI-ML, Brown, Len
[-- Attachment #1: Type: text/plain, Size: 954 bytes --]
Moore, Robert wrote:
> BTW,
>
> The implementations of ACPI_ERROR/WARNING/INFO automatically insert a
> newline at the end of the message, along with the ACPI version.
>
> + ACPI_ERROR((AE_INFO, "Error reading AC Adapter
> state\n"));
>
> So, you will probably want to remove the \n at the end of each of these.
>
> With hundreds of such messages, this actually saves an "interesting"
> amount of memory.
>
> Also, I created the ACPI_EXCEPTION interface that will decode and
> display the ACPI_STATUS code; you may want to use this instead of
> ACPI_ERROR is some cases.
>
Ok, I now made use of the ACPI_EXCEPTION, whenever possible.
Also shortend some "Error:", "ACPI bug:" messages.
Also added the EXPORT_SYMBOLS(ut_warning/error/exception) function decl. in
(in a separated patch -> ACPICA, acpi/utilities/utmisc.c).
Also added errors inside remove/install handler funcs (in a separated patch -> ACPICA,
acpi/events/evxface.c).
Thomas
[-- Attachment #2: acpi_show_errors_new --]
[-- Type: text/plain, Size: 81713 bytes --]
Subject: Enables important ACPI errors even ACPI_DEBUG is not set.
signed-off-by: trenn@suse.de
ac.c | 12 +-----
acpi_memhotplug.c | 67 ++++++++++++++----------------------
battery.c | 31 ++++------------
bus.c | 22 +++++------
button.c | 18 ++-------
container.c | 2 -
debug.c | 5 --
ec.c | 17 +++------
event.c | 5 --
fan.c | 7 +--
hotkey.c | 38 ++++----------------
osl.c | 12 +++---
pci_bind.c | 50 +++++++++++++--------------
pci_irq.c | 20 ++++------
pci_link.c | 90 ++++++++++++++++++++++---------------------------
pci_root.c | 15 ++++----
power.c | 22 ++++-------
processor_core.c | 60 +++++++++++---------------------
processor_idle.c | 14 ++-----
processor_perflib.c | 37 ++++++++------------
processor_thermal.c | 11 ++---
processor_throttling.c | 2 -
scan.c | 7 +--
system.c | 3 -
thermal.c | 58 ++++++++++---------------------
utils.c | 50 +++++++++++++--------------
video.c | 54 ++++++++---------------------
27 files changed, 276 insertions(+), 453 deletions(-)
Index: linux-2.6.15/drivers/acpi/ac.c
===================================================================
--- linux-2.6.15.orig/drivers/acpi/ac.c
+++ linux-2.6.15/drivers/acpi/ac.c
@@ -91,8 +91,7 @@ static int acpi_ac_get_state(struct acpi
status = acpi_evaluate_integer(ac->handle, "_PSR", NULL, &ac->state);
if (ACPI_FAILURE(status)) {
- ACPI_DEBUG_PRINT((ACPI_DB_ERROR,
- "Error reading AC Adapter state\n"));
+ ACPI_EXCEPTION((AE_INFO, status, "Error reading AC Adapter state"));
ac->state = ACPI_AC_STATUS_UNKNOWN;
return_VALUE(-ENODEV);
}
@@ -159,9 +158,7 @@ static int acpi_ac_add_fs(struct acpi_de
entry = create_proc_entry(ACPI_AC_FILE_STATE,
S_IRUGO, acpi_device_dir(device));
if (!entry)
- ACPI_DEBUG_PRINT((ACPI_DB_ERROR,
- "Unable to create '%s' fs entry\n",
- ACPI_AC_FILE_STATE));
+ return_VALUE(-ENODEV);
else {
entry->proc_fops = &acpi_ac_fops;
entry->data = acpi_driver_data(device);
@@ -249,8 +246,6 @@ static int acpi_ac_add(struct acpi_devic
ACPI_DEVICE_NOTIFY, acpi_ac_notify,
ac);
if (ACPI_FAILURE(status)) {
- ACPI_DEBUG_PRINT((ACPI_DB_ERROR,
- "Error installing notify handler\n"));
result = -ENODEV;
goto end;
}
@@ -282,9 +277,6 @@ static int acpi_ac_remove(struct acpi_de
status = acpi_remove_notify_handler(ac->handle,
ACPI_DEVICE_NOTIFY, acpi_ac_notify);
- if (ACPI_FAILURE(status))
- ACPI_DEBUG_PRINT((ACPI_DB_ERROR,
- "Error removing notify handler\n"));
acpi_ac_remove_fs(device);
Index: linux-2.6.15/drivers/acpi/acpi_memhotplug.c
===================================================================
--- linux-2.6.15.orig/drivers/acpi/acpi_memhotplug.c
+++ linux-2.6.15/drivers/acpi/acpi_memhotplug.c
@@ -153,15 +153,14 @@ acpi_memory_get_device(acpi_handle handl
status = acpi_get_parent(handle, &phandle);
if (ACPI_FAILURE(status)) {
- ACPI_DEBUG_PRINT((ACPI_DB_ERROR, "Error in acpi_get_parent\n"));
+ ACPI_EXCEPTION((AE_INFO, status, "Cannot find acpi parent"));
return_VALUE(-EINVAL);
}
/* Get the parent device */
status = acpi_bus_get_device(phandle, &pdevice);
if (ACPI_FAILURE(status)) {
- ACPI_DEBUG_PRINT((ACPI_DB_ERROR,
- "Error in acpi_bus_get_device\n"));
+ ACPI_EXCEPTION((AE_INFO, status, "Cannot get acpi bus device"));
return_VALUE(-EINVAL);
}
@@ -171,7 +170,7 @@ acpi_memory_get_device(acpi_handle handl
*/
status = acpi_bus_add(&device, pdevice, handle, ACPI_BUS_TYPE_DEVICE);
if (ACPI_FAILURE(status)) {
- ACPI_DEBUG_PRINT((ACPI_DB_ERROR, "Error in acpi_bus_add\n"));
+ ACPI_EXCEPTION((AE_INFO, status, "Cannot add acpi bus"));
return_VALUE(-EINVAL);
}
end:
@@ -219,8 +218,7 @@ static int acpi_memory_enable_device(str
/* Get the range from the _CRS */
result = acpi_memory_get_device_resources(mem_device);
if (result) {
- ACPI_DEBUG_PRINT((ACPI_DB_ERROR,
- "\nget_device_resources failed\n"));
+ ACPI_ERROR((AE_INFO, "get_device_resources failed"));
mem_device->state = MEMORY_INVALID_STATE;
return result;
}
@@ -232,7 +230,7 @@ static int acpi_memory_enable_device(str
result = add_memory(mem_device->start_addr,
(mem_device->end_addr - mem_device->start_addr) + 1);
if (result) {
- ACPI_DEBUG_PRINT((ACPI_DB_ERROR, "\nadd_memory failed\n"));
+ ACPI_ERROR((AE_INFO, "add_memory failed"));
mem_device->state = MEMORY_INVALID_STATE;
return result;
}
@@ -258,7 +256,7 @@ static int acpi_memory_powerdown_device(
"_EJ0", &arg_list, NULL);
/* Return on _EJ0 failure */
if (ACPI_FAILURE(status)) {
- ACPI_DEBUG_PRINT((ACPI_DB_ERROR, "_EJ0 failed.\n"));
+ ACPI_EXCEPTION((AE_INFO, status, "_EJ0 failed"));
return_VALUE(-ENODEV);
}
@@ -288,16 +286,12 @@ static int acpi_memory_disable_device(st
* Note: Assume that this function returns zero on success
*/
result = remove_memory(start, len);
- if (result) {
- ACPI_DEBUG_PRINT((ACPI_DB_ERROR, "Hot-Remove failed.\n"));
+ if (result)
return_VALUE(result);
- }
/* Power-off and eject the device */
result = acpi_memory_powerdown_device(mem_device);
if (result) {
- ACPI_DEBUG_PRINT((ACPI_DB_ERROR,
- "Device Power Down failed.\n"));
/* Set the status of the device to invalid */
mem_device->state = MEMORY_INVALID_STATE;
return result;
@@ -324,15 +318,14 @@ static void acpi_memory_device_notify(ac
ACPI_DEBUG_PRINT((ACPI_DB_INFO,
"\nReceived DEVICE CHECK notification for device\n"));
if (acpi_memory_get_device(handle, &mem_device)) {
- ACPI_DEBUG_PRINT((ACPI_DB_ERROR,
- "Error in finding driver data\n"));
+ ACPI_ERROR((AE_INFO, "Cannot find driver data"));
return_VOID;
}
if (!acpi_memory_check_device(mem_device)) {
if (acpi_memory_enable_device(mem_device))
- ACPI_DEBUG_PRINT((ACPI_DB_ERROR,
- "Error in acpi_memory_enable_device\n"));
+ ACPI_ERROR((AE_INFO,
+ "Cannot enable memory device"));
}
break;
case ACPI_NOTIFY_EJECT_REQUEST:
@@ -340,14 +333,12 @@ static void acpi_memory_device_notify(ac
"\nReceived EJECT REQUEST notification for device\n"));
if (acpi_bus_get_device(handle, &device)) {
- ACPI_DEBUG_PRINT((ACPI_DB_ERROR,
- "Device doesn't exist\n"));
+ ACPI_ERROR((AE_INFO, "Device doesn't exist"));
break;
}
mem_device = acpi_driver_data(device);
if (!mem_device) {
- ACPI_DEBUG_PRINT((ACPI_DB_ERROR,
- "Driver Data is NULL\n"));
+ ACPI_ERROR((AE_INFO, "Driver Data is NULL"));
break;
}
@@ -358,8 +349,8 @@ static void acpi_memory_device_notify(ac
* with generic sysfs driver
*/
if (acpi_memory_disable_device(mem_device))
- ACPI_DEBUG_PRINT((ACPI_DB_ERROR,
- "Error in acpi_memory_disable_device\n"));
+ ACPI_ERROR((AE_INFO,
+ "Disable memory device\n"));
/*
* TBD: Invoke acpi_bus_remove to cleanup data structures
*/
@@ -437,7 +428,7 @@ static acpi_status is_memory_device(acpi
status = acpi_get_object_info(handle, &buffer);
if (ACPI_FAILURE(status))
- return_ACPI_STATUS(AE_ERROR);
+ return_ACPI_STATUS(status);
info = buffer.pointer;
if (!(info->valid & ACPI_VALID_HID)) {
@@ -463,18 +454,15 @@ acpi_memory_register_notify_handler(acpi
ACPI_FUNCTION_TRACE("acpi_memory_register_notify_handler");
status = is_memory_device(handle);
- if (ACPI_FAILURE(status))
+ if (ACPI_FAILURE(status)){
+ ACPI_EXCEPTION((AE_INFO, status, "handle is no memory device"));
return_ACPI_STATUS(AE_OK); /* continue */
+ }
status = acpi_install_notify_handler(handle, ACPI_SYSTEM_NOTIFY,
acpi_memory_device_notify, NULL);
- if (ACPI_FAILURE(status)) {
- ACPI_DEBUG_PRINT((ACPI_DB_ERROR,
- "Error installing notify handler\n"));
- return_ACPI_STATUS(AE_OK); /* continue */
- }
-
- return_ACPI_STATUS(status);
+ /* continue */
+ return_ACPI_STATUS(AE_OK);
}
static acpi_status
@@ -486,19 +474,16 @@ acpi_memory_deregister_notify_handler(ac
ACPI_FUNCTION_TRACE("acpi_memory_deregister_notify_handler");
status = is_memory_device(handle);
- if (ACPI_FAILURE(status))
+ if (ACPI_FAILURE(status)){
+ ACPI_EXCEPTION((AE_INFO, status, "handle is no memory device"));
return_ACPI_STATUS(AE_OK); /* continue */
+ }
status = acpi_remove_notify_handler(handle,
ACPI_SYSTEM_NOTIFY,
acpi_memory_device_notify);
- if (ACPI_FAILURE(status)) {
- ACPI_DEBUG_PRINT((ACPI_DB_ERROR,
- "Error removing notify handler\n"));
- return_ACPI_STATUS(AE_OK); /* continue */
- }
- return_ACPI_STATUS(status);
+ return_ACPI_STATUS(AE_OK); /* continue */
}
static int __init acpi_memory_device_init(void)
@@ -519,7 +504,7 @@ static int __init acpi_memory_device_ini
NULL, NULL);
if (ACPI_FAILURE(status)) {
- ACPI_DEBUG_PRINT((ACPI_DB_ERROR, "walk_namespace failed\n"));
+ ACPI_EXCEPTION((AE_INFO, status, "walk_namespace failed"));
acpi_bus_unregister_driver(&acpi_memory_device_driver);
return_VALUE(-ENODEV);
}
@@ -543,7 +528,7 @@ static void __exit acpi_memory_device_ex
NULL, NULL);
if (ACPI_FAILURE(status))
- ACPI_DEBUG_PRINT((ACPI_DB_ERROR, "walk_namespace failed\n"));
+ ACPI_EXCEPTION((AE_INFO, status, "walk_namespace failed"));
acpi_bus_unregister_driver(&acpi_memory_device_driver);
Index: linux-2.6.15/drivers/acpi/battery.c
===================================================================
--- linux-2.6.15.orig/drivers/acpi/battery.c
+++ linux-2.6.15/drivers/acpi/battery.c
@@ -141,7 +141,7 @@ acpi_battery_get_info(struct acpi_batter
status = acpi_evaluate_object(battery->handle, "_BIF", NULL, &buffer);
if (ACPI_FAILURE(status)) {
- ACPI_DEBUG_PRINT((ACPI_DB_ERROR, "Error evaluating _BIF\n"));
+ ACPI_EXCEPTION((AE_INFO, status, "Evaluating _BIF"));
return_VALUE(-ENODEV);
}
@@ -151,7 +151,7 @@ acpi_battery_get_info(struct acpi_batter
status = acpi_extract_package(package, &format, &data);
if (status != AE_BUFFER_OVERFLOW) {
- ACPI_DEBUG_PRINT((ACPI_DB_ERROR, "Error extracting _BIF\n"));
+ ACPI_EXCEPTION((AE_INFO, status, "Extracting _BIF"));
result = -ENODEV;
goto end;
}
@@ -165,7 +165,7 @@ acpi_battery_get_info(struct acpi_batter
status = acpi_extract_package(package, &format, &data);
if (ACPI_FAILURE(status)) {
- ACPI_DEBUG_PRINT((ACPI_DB_ERROR, "Error extracting _BIF\n"));
+ ACPI_EXCEPTION((AE_INFO, status, "Extracting _BIF"));
kfree(data.pointer);
result = -ENODEV;
goto end;
@@ -202,7 +202,7 @@ acpi_battery_get_status(struct acpi_batt
status = acpi_evaluate_object(battery->handle, "_BST", NULL, &buffer);
if (ACPI_FAILURE(status)) {
- ACPI_DEBUG_PRINT((ACPI_DB_ERROR, "Error evaluating _BST\n"));
+ ACPI_EXCEPTION((AE_INFO, status, "Evaluating _BST"));
return_VALUE(-ENODEV);
}
@@ -212,7 +212,7 @@ acpi_battery_get_status(struct acpi_batt
status = acpi_extract_package(package, &format, &data);
if (status != AE_BUFFER_OVERFLOW) {
- ACPI_DEBUG_PRINT((ACPI_DB_ERROR, "Error extracting _BST\n"));
+ ACPI_EXCEPTION((AE_INFO, status, "Extracting _BST"));
result = -ENODEV;
goto end;
}
@@ -226,7 +226,7 @@ acpi_battery_get_status(struct acpi_batt
status = acpi_extract_package(package, &format, &data);
if (ACPI_FAILURE(status)) {
- ACPI_DEBUG_PRINT((ACPI_DB_ERROR, "Error extracting _BST\n"));
+ ACPI_EXCEPTION((AE_INFO, status, "Extracting _BST"));
kfree(data.pointer);
result = -ENODEV;
goto end;
@@ -458,8 +458,6 @@ static int acpi_battery_read_state(struc
if ((bst->state & 0x01) && (bst->state & 0x02)) {
seq_printf(seq,
"charging state: charging/discharging\n");
- ACPI_DEBUG_PRINT((ACPI_DB_ERROR,
- "Battery Charging and Discharging?\n"));
} else if (bst->state & 0x01)
seq_printf(seq, "charging state: discharging\n");
else if (bst->state & 0x02)
@@ -609,9 +607,7 @@ static int acpi_battery_add_fs(struct ac
entry = create_proc_entry(ACPI_BATTERY_FILE_INFO,
S_IRUGO, acpi_device_dir(device));
if (!entry)
- ACPI_DEBUG_PRINT((ACPI_DB_ERROR,
- "Unable to create '%s' fs entry\n",
- ACPI_BATTERY_FILE_INFO));
+ return_VALUE(-ENODEV);
else {
entry->proc_fops = &acpi_battery_info_ops;
entry->data = acpi_driver_data(device);
@@ -622,9 +618,7 @@ static int acpi_battery_add_fs(struct ac
entry = create_proc_entry(ACPI_BATTERY_FILE_STATUS,
S_IRUGO, acpi_device_dir(device));
if (!entry)
- ACPI_DEBUG_PRINT((ACPI_DB_ERROR,
- "Unable to create '%s' fs entry\n",
- ACPI_BATTERY_FILE_STATUS));
+ return_VALUE(-ENODEV);
else {
entry->proc_fops = &acpi_battery_state_ops;
entry->data = acpi_driver_data(device);
@@ -636,9 +630,7 @@ static int acpi_battery_add_fs(struct ac
S_IFREG | S_IRUGO | S_IWUSR,
acpi_device_dir(device));
if (!entry)
- ACPI_DEBUG_PRINT((ACPI_DB_ERROR,
- "Unable to create '%s' fs entry\n",
- ACPI_BATTERY_FILE_ALARM));
+ return_VALUE(-ENODEV);
else {
entry->proc_fops = &acpi_battery_alarm_ops;
entry->data = acpi_driver_data(device);
@@ -732,8 +724,6 @@ static int acpi_battery_add(struct acpi_
ACPI_DEVICE_NOTIFY,
acpi_battery_notify, battery);
if (ACPI_FAILURE(status)) {
- ACPI_DEBUG_PRINT((ACPI_DB_ERROR,
- "Error installing notify handler\n"));
result = -ENODEV;
goto end;
}
@@ -766,9 +756,6 @@ static int acpi_battery_remove(struct ac
status = acpi_remove_notify_handler(battery->handle,
ACPI_DEVICE_NOTIFY,
acpi_battery_notify);
- if (ACPI_FAILURE(status))
- ACPI_DEBUG_PRINT((ACPI_DB_ERROR,
- "Error removing notify handler\n"));
acpi_battery_remove_fs(device);
Index: linux-2.6.15/drivers/acpi/bus.c
===================================================================
--- linux-2.6.15.orig/drivers/acpi/bus.c
+++ linux-2.6.15/drivers/acpi/bus.c
@@ -69,8 +69,7 @@ int acpi_bus_get_device(acpi_handle hand
status = acpi_get_data(handle, acpi_bus_data_handler, (void **)device);
if (ACPI_FAILURE(status) || !*device) {
- ACPI_DEBUG_PRINT((ACPI_DB_WARN, "No context for object [%p]\n",
- handle));
+ ACPI_EXCEPTION((AE_INFO, status, "No context for object [%p]", handle));
return_VALUE(-ENODEV);
}
@@ -197,8 +196,7 @@ int acpi_bus_set_power(acpi_handle handl
/* Make sure this is a valid target state */
if (!device->flags.power_manageable) {
- ACPI_DEBUG_PRINT((ACPI_DB_WARN,
- "Device is not power manageable\n"));
+ ACPI_INFO((AE_INFO, "Device is not power manageable"));
return_VALUE(-ENODEV);
}
/*
@@ -213,13 +211,13 @@ int acpi_bus_set_power(acpi_handle handl
return_VALUE(0);
}
if (!device->power.states[state].flags.valid) {
- ACPI_DEBUG_PRINT((ACPI_DB_WARN, "Device does not support D%d\n",
- state));
+ ACPI_WARNING((AE_INFO, "Device does not support D%d", state));
return_VALUE(-ENODEV);
}
if (device->parent && (state < device->parent->power.state)) {
- ACPI_DEBUG_PRINT((ACPI_DB_WARN,
- "Cannot set device to a higher-powered state than parent\n"));
+ ACPI_WARNING((AE_INFO,
+ "Cannot set device to a higher-powered"
+ " state than parent"));
return_VALUE(-ENODEV);
}
@@ -262,9 +260,9 @@ int acpi_bus_set_power(acpi_handle handl
end:
if (result)
- ACPI_DEBUG_PRINT((ACPI_DB_WARN,
- "Error transitioning device [%s] to D%d\n",
- device->pnp.bus_id, state));
+ ACPI_WARNING((AE_INFO,
+ "Transitioning device [%s] to D%d",
+ device->pnp.bus_id, state));
else
ACPI_DEBUG_PRINT((ACPI_DB_INFO,
"Device [%s] transitioned to D%d\n",
@@ -579,7 +577,7 @@ static int __init acpi_bus_init_irq(void
status = acpi_evaluate_object(NULL, "\\_PIC", &arg_list, NULL);
if (ACPI_FAILURE(status) && (status != AE_NOT_FOUND)) {
- ACPI_DEBUG_PRINT((ACPI_DB_ERROR, "Error evaluating _PIC\n"));
+ ACPI_EXCEPTION((AE_INFO, status, "Evaluating _PIC"));
return_VALUE(-ENODEV);
}
Index: linux-2.6.15/drivers/acpi/button.c
===================================================================
--- linux-2.6.15.orig/drivers/acpi/button.c
+++ linux-2.6.15/drivers/acpi/button.c
@@ -207,9 +207,7 @@ static int acpi_button_add_fs(struct acp
entry = create_proc_entry(ACPI_BUTTON_FILE_INFO,
S_IRUGO, acpi_device_dir(device));
if (!entry)
- ACPI_DEBUG_PRINT((ACPI_DB_ERROR,
- "Unable to create '%s' fs entry\n",
- ACPI_BUTTON_FILE_INFO));
+ return_VALUE(-ENODEV);
else {
entry->proc_fops = &acpi_button_info_fops;
entry->data = acpi_driver_data(device);
@@ -221,9 +219,7 @@ static int acpi_button_add_fs(struct acp
entry = create_proc_entry(ACPI_BUTTON_FILE_STATE,
S_IRUGO, acpi_device_dir(device));
if (!entry)
- ACPI_DEBUG_PRINT((ACPI_DB_ERROR,
- "Unable to create '%s' fs entry\n",
- ACPI_BUTTON_FILE_INFO));
+ return -ENODEV;
else {
entry->proc_fops = &acpi_button_state_fops;
entry->data = acpi_driver_data(device);
@@ -349,8 +345,8 @@ static int acpi_button_add(struct acpi_d
sprintf(acpi_device_class(device), "%s/%s",
ACPI_BUTTON_CLASS, ACPI_BUTTON_SUBCLASS_LID);
} else {
- ACPI_DEBUG_PRINT((ACPI_DB_ERROR, "Unsupported hid [%s]\n",
- acpi_device_hid(device)));
+ ACPI_ERROR((AE_INFO, "Unsupported hid [%s]",
+ acpi_device_hid(device)));
result = -ENODEV;
goto end;
}
@@ -381,8 +377,6 @@ static int acpi_button_add(struct acpi_d
}
if (ACPI_FAILURE(status)) {
- ACPI_DEBUG_PRINT((ACPI_DB_ERROR,
- "Error installing notify handler\n"));
result = -ENODEV;
goto end;
}
@@ -440,10 +434,6 @@ static int acpi_button_remove(struct acp
break;
}
- if (ACPI_FAILURE(status))
- ACPI_DEBUG_PRINT((ACPI_DB_ERROR,
- "Error removing notify handler\n"));
-
acpi_button_remove_fs(device);
kfree(button);
Index: linux-2.6.15/drivers/acpi/container.c
===================================================================
--- linux-2.6.15.orig/drivers/acpi/container.c
+++ linux-2.6.15/drivers/acpi/container.c
@@ -94,7 +94,7 @@ static int acpi_container_add(struct acp
ACPI_FUNCTION_TRACE("acpi_container_add");
if (!device) {
- ACPI_DEBUG_PRINT((ACPI_DB_ERROR, "device is NULL\n"));
+ ACPI_ERROR((AE_INFO, "device is NULL"));
return_VALUE(-EINVAL);
}
Index: linux-2.6.15/drivers/acpi/debug.c
===================================================================
--- linux-2.6.15.orig/drivers/acpi/debug.c
+++ linux-2.6.15/drivers/acpi/debug.c
@@ -216,12 +216,9 @@ static int __init acpi_debug_init(void)
return_VALUE(error);
Error:
- ACPI_DEBUG_PRINT((ACPI_DB_ERROR,
- "Unable to create '%s' proc fs entry\n", name));
-
remove_proc_entry(ACPI_SYSTEM_FILE_DEBUG_LEVEL, acpi_root_dir);
remove_proc_entry(ACPI_SYSTEM_FILE_DEBUG_LAYER, acpi_root_dir);
- error = -EFAULT;
+ error = -ENODEV;
goto Done;
}
Index: linux-2.6.15/drivers/acpi/ec.c
===================================================================
--- linux-2.6.15.orig/drivers/acpi/ec.c
+++ linux-2.6.15/drivers/acpi/ec.c
@@ -279,7 +279,7 @@ int acpi_ec_enter_burst_mode(union acpi_
atomic_set(&ec->intr.leaving_burst, 0);
return_VALUE(0);
end:
- printk(KERN_WARNING PREFIX "Error in acpi_ec_wait\n");
+ ACPI_EXCEPTION ((AE_INFO, status, "EC wait, burst mode");
return_VALUE(-1);
}
@@ -300,7 +300,7 @@ int acpi_ec_leave_burst_mode(union acpi_
atomic_set(&ec->intr.leaving_burst, 1);
return_VALUE(0);
end:
- printk(KERN_WARNING PREFIX "leave burst_mode:error\n");
+ ACPI_EXCEPTION((AE_INFO, status, "EC leave burst mode");
return_VALUE(-1);
}
#endif /* ACPI_FUTURE_USAGE */
@@ -957,9 +957,7 @@ static int acpi_ec_add_fs(struct acpi_de
entry = create_proc_entry(ACPI_EC_FILE_INFO, S_IRUGO,
acpi_device_dir(device));
if (!entry)
- ACPI_DEBUG_PRINT((ACPI_DB_WARN,
- "Unable to create '%s' fs entry\n",
- ACPI_EC_FILE_INFO));
+ return_VALUE(-ENODEV);
else {
entry->proc_fops = &acpi_ec_info_ops;
entry->data = acpi_driver_data(device);
@@ -1034,8 +1032,7 @@ static int acpi_ec_poll_add(struct acpi_
acpi_evaluate_integer(ec->common.handle, "_GPE", NULL,
&ec->common.gpe_bit);
if (ACPI_FAILURE(status)) {
- ACPI_DEBUG_PRINT((ACPI_DB_ERROR,
- "Error obtaining GPE bit assignment\n"));
+ ACPI_EXCEPTION((AE_INFO, status, "Obtaining GPE bit"));
result = -ENODEV;
goto end;
}
@@ -1108,8 +1105,7 @@ static int acpi_ec_intr_add(struct acpi_
acpi_evaluate_integer(ec->common.handle, "_GPE", NULL,
&ec->common.gpe_bit);
if (ACPI_FAILURE(status)) {
- ACPI_DEBUG_PRINT((ACPI_DB_ERROR,
- "Error obtaining GPE bit assignment\n"));
+ ACPI_ERROR((AE_INFO, "Obtaining GPE bit assignment"));
result = -ENODEV;
goto end;
}
@@ -1203,8 +1199,7 @@ static int acpi_ec_start(struct acpi_dev
acpi_ec_io_ports, ec);
if (ACPI_FAILURE(status)
|| ec->common.command_addr.register_bit_width == 0) {
- ACPI_DEBUG_PRINT((ACPI_DB_ERROR,
- "Error getting I/O port addresses"));
+ ACPI_ERROR((AE_INFO, "Error getting I/O port addresses"));
return_VALUE(-ENODEV);
}
Index: linux-2.6.15/drivers/acpi/event.c
===================================================================
--- linux-2.6.15.orig/drivers/acpi/event.c
+++ linux-2.6.15/drivers/acpi/event.c
@@ -122,10 +122,7 @@ static int __init acpi_event_init(void)
if (entry)
entry->proc_fops = &acpi_system_event_ops;
else {
- ACPI_DEBUG_PRINT((ACPI_DB_ERROR,
- "Unable to create '%s' proc fs entry\n",
- "event"));
- error = -EFAULT;
+ error = -ENODEV;
}
return_VALUE(error);
}
Index: linux-2.6.15/drivers/acpi/fan.c
===================================================================
--- linux-2.6.15.orig/drivers/acpi/fan.c
+++ linux-2.6.15/drivers/acpi/fan.c
@@ -149,9 +149,7 @@ static int acpi_fan_add_fs(struct acpi_d
S_IFREG | S_IRUGO | S_IWUSR,
acpi_device_dir(device));
if (!entry)
- ACPI_DEBUG_PRINT((ACPI_DB_ERROR,
- "Unable to create '%s' fs entry\n",
- ACPI_FAN_FILE_STATE));
+ return_VALUE(-ENODEV);
else {
entry->proc_fops = &acpi_fan_state_ops;
entry->data = acpi_driver_data(device);
@@ -201,8 +199,7 @@ static int acpi_fan_add(struct acpi_devi
result = acpi_bus_get_power(fan->handle, &state);
if (result) {
- ACPI_DEBUG_PRINT((ACPI_DB_ERROR,
- "Error reading power state\n"));
+ ACPI_ERROR((AE_INFO, "Reading power state"));
goto end;
}
Index: linux-2.6.15/drivers/acpi/hotkey.c
===================================================================
--- linux-2.6.15.orig/drivers/acpi/hotkey.c
+++ linux-2.6.15/drivers/acpi/hotkey.c
@@ -356,9 +356,6 @@ static int create_polling_proc(union acp
proc = create_proc_entry(proc_name, mode, hotkey_proc_dir);
if (!proc) {
- ACPI_DEBUG_PRINT((ACPI_DB_ERROR,
- "Hotkey: Unable to create %s entry\n",
- device->poll_hotkey.poll_method));
return_VALUE(-ENODEV);
} else {
proc->proc_fops = &hotkey_polling_fops;
@@ -769,7 +766,7 @@ static ssize_t hotkey_write_config(struc
if (copy_from_user(config_record, buffer, count)) {
kfree(config_record);
- ACPI_DEBUG_PRINT((ACPI_DB_ERROR, "Invalid data \n"));
+ ACPI_ERROR((AE_INFO, "Invalid data"));
return_VALUE(-EINVAL);
}
config_record[count] = 0;
@@ -790,8 +787,7 @@ static ssize_t hotkey_write_config(struc
kfree(bus_method);
kfree(action_handle);
kfree(method);
- ACPI_DEBUG_PRINT((ACPI_DB_ERROR,
- "Invalid data format ret=%d\n", ret));
+ ACPI_ERROR((AE_INFO, "Invalid data format ret=%d", ret));
return_VALUE(-EINVAL);
}
@@ -804,7 +800,7 @@ static ssize_t hotkey_write_config(struc
tmp = get_hotkey_by_event(&global_hotkey_list,
internal_event_num);
if (!tmp)
- ACPI_DEBUG_PRINT((ACPI_DB_ERROR, "Invalid key"));
+ ACPI_ERROR((AE_INFO, "Invalid key"));
else
memcpy(key, tmp, sizeof(union acpi_hotkey));
goto cont_cmd;
@@ -826,7 +822,7 @@ static ssize_t hotkey_write_config(struc
else
free_poll_hotkey_buffer(key);
kfree(key);
- ACPI_DEBUG_PRINT((ACPI_DB_ERROR, "Invalid hotkey \n"));
+ ACPI_ERROR((AE_INFO, "Invalid hotkey"));
return_VALUE(-EINVAL);
}
@@ -860,7 +856,7 @@ static ssize_t hotkey_write_config(struc
else
free_poll_hotkey_buffer(key);
kfree(key);
- ACPI_DEBUG_PRINT((ACPI_DB_ERROR, "invalid key\n"));
+ ACPI_ERROR((AE_INFO, "invalid key"));
return_VALUE(-EINVAL);
}
@@ -905,7 +901,7 @@ static int read_acpi_int(acpi_handle han
val->integer.value = out_obj.integer.value;
val->type = out_obj.type;
} else
- ACPI_DEBUG_PRINT((ACPI_DB_ERROR, "null val pointer"));
+ ACPI_ERROR((AE_INFO, "null val pointer"));
return_VALUE((status == AE_OK)
&& (out_obj.type == ACPI_TYPE_INTEGER));
}
@@ -952,14 +948,14 @@ static ssize_t hotkey_execute_aml_method
if (copy_from_user(arg, buffer, count)) {
kfree(arg);
- ACPI_DEBUG_PRINT((ACPI_DB_ERROR, "Invalid argument 2"));
+ ACPI_ERROR((AE_INFO, "Invalid argument 2"));
return_VALUE(-EINVAL);
}
if (sscanf(arg, "%d:%d:%d:%d", &event, &method_type, &type, &value) !=
4) {
kfree(arg);
- ACPI_DEBUG_PRINT((ACPI_DB_ERROR, "Invalid argument 3"));
+ ACPI_ERROR((AE_INFO, "Invalid argument 3"));
return_VALUE(-EINVAL);
}
kfree(arg);
@@ -985,7 +981,7 @@ static ssize_t hotkey_execute_aml_method
}
} else {
- ACPI_DEBUG_PRINT((ACPI_DB_ERROR, "Not supported"));
+ ACPI_WARNING((AE_INFO, "Not supported"));
return_VALUE(-EINVAL);
}
return_VALUE(count);
@@ -1011,9 +1007,6 @@ static int __init hotkey_init(void)
hotkey_proc_dir = proc_mkdir(HOTKEY_PROC, acpi_root_dir);
if (!hotkey_proc_dir) {
- ACPI_DEBUG_PRINT((ACPI_DB_ERROR,
- "Hotkey: Unable to create %s entry\n",
- HOTKEY_PROC));
return (-ENODEV);
}
hotkey_proc_dir->owner = THIS_MODULE;
@@ -1021,9 +1014,6 @@ static int __init hotkey_init(void)
hotkey_config =
create_proc_entry(HOTKEY_EV_CONFIG, mode, hotkey_proc_dir);
if (!hotkey_config) {
- ACPI_DEBUG_PRINT((ACPI_DB_ERROR,
- "Hotkey: Unable to create %s entry\n",
- HOTKEY_EV_CONFIG));
goto do_fail1;
} else {
hotkey_config->proc_fops = &hotkey_config_fops;
@@ -1036,10 +1026,6 @@ static int __init hotkey_init(void)
hotkey_poll_config =
create_proc_entry(HOTKEY_PL_CONFIG, mode, hotkey_proc_dir);
if (!hotkey_poll_config) {
- ACPI_DEBUG_PRINT((ACPI_DB_ERROR,
- "Hotkey: Unable to create %s entry\n",
- HOTKEY_EV_CONFIG));
-
goto do_fail2;
} else {
hotkey_poll_config->proc_fops = &hotkey_poll_config_fops;
@@ -1051,9 +1037,6 @@ static int __init hotkey_init(void)
hotkey_action = create_proc_entry(HOTKEY_ACTION, mode, hotkey_proc_dir);
if (!hotkey_action) {
- ACPI_DEBUG_PRINT((ACPI_DB_ERROR,
- "Hotkey: Unable to create %s entry\n",
- HOTKEY_ACTION));
goto do_fail3;
} else {
hotkey_action->proc_fops = &hotkey_action_fops;
@@ -1064,9 +1047,6 @@ static int __init hotkey_init(void)
hotkey_info = create_proc_entry(HOTKEY_INFO, mode, hotkey_proc_dir);
if (!hotkey_info) {
- ACPI_DEBUG_PRINT((ACPI_DB_ERROR,
- "Hotkey: Unable to create %s entry\n",
- HOTKEY_INFO));
goto do_fail4;
} else {
hotkey_info->proc_fops = &hotkey_info_fops;
Index: linux-2.6.15/drivers/acpi/osl.c
===================================================================
--- linux-2.6.15.orig/drivers/acpi/osl.c
+++ linux-2.6.15/drivers/acpi/osl.c
@@ -138,6 +138,7 @@ void acpi_os_vprintf(const char *fmt, va
#endif
}
+
extern int acpi_in_resume;
void *acpi_os_allocate(acpi_size size)
{
@@ -700,7 +701,7 @@ static void acpi_os_execute_deferred(voi
dpc = (struct acpi_os_dpc *)context;
if (!dpc) {
- ACPI_DEBUG_PRINT((ACPI_DB_ERROR, "Invalid (NULL) context.\n"));
+ ACPI_ERROR((AE_INFO, "Invalid (NULL) context"));
return_VOID;
}
@@ -752,8 +753,7 @@ acpi_os_queue_for_execution(u32 priority
INIT_WORK(task, acpi_os_execute_deferred, (void *)dpc);
if (!queue_work(kacpid_wq, task)) {
- ACPI_DEBUG_PRINT((ACPI_DB_ERROR,
- "Call to queue_work() failed.\n"));
+ ACPI_ERROR((AE_INFO, "Call to queue_work() failed"));
kfree(dpc);
status = AE_ERROR;
}
@@ -927,13 +927,13 @@ acpi_status acpi_os_wait_semaphore(acpi_
}
if (ACPI_FAILURE(status)) {
- ACPI_DEBUG_PRINT((ACPI_DB_ERROR,
- "Failed to acquire semaphore[%p|%d|%d], %s\n",
+ ACPI_EXCEPTION((AE_INFO, status,
+ "Failed to acquire semaphore[%p|%d|%d], %s",
handle, units, timeout,
acpi_format_exception(status)));
} else {
ACPI_DEBUG_PRINT((ACPI_DB_MUTEX,
- "Acquired semaphore[%p|%d|%d]\n", handle,
+ "Acquired semaphore[%p|%d|%d]", handle,
units, timeout));
}
Index: linux-2.6.15/drivers/acpi/pci_bind.c
===================================================================
--- linux-2.6.15.orig/drivers/acpi/pci_bind.c
+++ linux-2.6.15/drivers/acpi/pci_bind.c
@@ -75,17 +75,17 @@ acpi_status acpi_get_pci_id(acpi_handle
result = acpi_bus_get_device(handle, &device);
if (result) {
- ACPI_DEBUG_PRINT((ACPI_DB_ERROR,
- "Invalid ACPI Bus context for device %s\n",
- acpi_device_bid(device)));
+ ACPI_ERROR((AE_INFO,
+ "Invalid ACPI Bus context for device %s",
+ acpi_device_bid(device)));
return_ACPI_STATUS(AE_NOT_EXIST);
}
status = acpi_get_data(handle, acpi_pci_data_handler, (void **)&data);
if (ACPI_FAILURE(status) || !data) {
- ACPI_DEBUG_PRINT((ACPI_DB_ERROR,
- "Invalid ACPI-PCI context for device %s\n",
- acpi_device_bid(device)));
+ ACPI_EXCEPTION((AE_INFO, status,
+ "Invalid ACPI-PCI context for device %s",
+ acpi_device_bid(device)));
return_ACPI_STATUS(status);
}
@@ -151,9 +151,9 @@ int acpi_pci_bind(struct acpi_device *de
status = acpi_get_data(device->parent->handle, acpi_pci_data_handler,
(void **)&pdata);
if (ACPI_FAILURE(status) || !pdata || !pdata->bus) {
- ACPI_DEBUG_PRINT((ACPI_DB_ERROR,
- "Invalid ACPI-PCI context for parent device %s\n",
- acpi_device_bid(device->parent)));
+ ACPI_EXCEPTION((AE_INFO, status,
+ "Invalid ACPI-PCI context for parent device %s",
+ acpi_device_bid(device->parent)));
result = -ENODEV;
goto end;
}
@@ -206,10 +206,10 @@ int acpi_pci_bind(struct acpi_device *de
goto end;
}
if (!data->dev->bus) {
- ACPI_DEBUG_PRINT((ACPI_DB_ERROR,
- "Device %02x:%02x:%02x.%02x has invalid 'bus' field\n",
- data->id.segment, data->id.bus,
- data->id.device, data->id.function));
+ ACPI_ERROR((AE_INFO,
+ "Device %02x:%02x:%02x.%02x has invalid 'bus' field",
+ data->id.segment, data->id.bus,
+ data->id.device, data->id.function));
result = -ENODEV;
goto end;
}
@@ -237,9 +237,9 @@ int acpi_pci_bind(struct acpi_device *de
*/
status = acpi_attach_data(device->handle, acpi_pci_data_handler, data);
if (ACPI_FAILURE(status)) {
- ACPI_DEBUG_PRINT((ACPI_DB_ERROR,
- "Unable to attach ACPI-PCI context to device %s\n",
- acpi_device_bid(device)));
+ ACPI_EXCEPTION((AE_INFO, status,
+ "Unable to attach ACPI-PCI context to device %s",
+ acpi_device_bid(device)));
result = -ENODEV;
goto end;
}
@@ -301,18 +301,18 @@ int acpi_pci_unbind(struct acpi_device *
acpi_get_data(device->handle, acpi_pci_data_handler,
(void **)&data);
if (ACPI_FAILURE(status)) {
- ACPI_DEBUG_PRINT((ACPI_DB_ERROR,
- "Unable to get data from device %s\n",
- acpi_device_bid(device)));
+ ACPI_EXCEPTION((AE_INFO, status,
+ "Unable to get data from device %s",
+ acpi_device_bid(device)));
result = -ENODEV;
goto end;
}
status = acpi_detach_data(device->handle, acpi_pci_data_handler);
if (ACPI_FAILURE(status)) {
- ACPI_DEBUG_PRINT((ACPI_DB_ERROR,
- "Unable to detach data from device %s\n",
- acpi_device_bid(device)));
+ ACPI_EXCEPTION((AE_INFO, status,
+ "Unable to detach data from device %s",
+ acpi_device_bid(device)));
result = -ENODEV;
goto end;
}
@@ -369,9 +369,9 @@ acpi_pci_bind_root(struct acpi_device *d
status = acpi_attach_data(device->handle, acpi_pci_data_handler, data);
if (ACPI_FAILURE(status)) {
- ACPI_DEBUG_PRINT((ACPI_DB_ERROR,
- "Unable to attach ACPI-PCI context to device %s\n",
- pathname));
+ ACPI_EXCEPTION((AE_INFO, status,
+ "Unable to attach ACPI-PCI context to device %s",
+ pathname));
result = -ENODEV;
goto end;
}
Index: linux-2.6.15/drivers/acpi/pci_irq.c
===================================================================
--- linux-2.6.15.orig/drivers/acpi/pci_irq.c
+++ linux-2.6.15/drivers/acpi/pci_irq.c
@@ -197,8 +197,8 @@ int acpi_pci_irq_add_prt(acpi_handle han
kfree(pathname);
status = acpi_get_irq_routing_table(handle, &buffer);
if (status != AE_BUFFER_OVERFLOW) {
- ACPI_DEBUG_PRINT((ACPI_DB_ERROR, "Error evaluating _PRT [%s]\n",
- acpi_format_exception(status)));
+ ACPI_EXCEPTION((AE_INFO, status, "Evaluating _PRT [%s]",
+ acpi_format_exception(status)));
return_VALUE(-ENODEV);
}
@@ -211,8 +211,8 @@ int acpi_pci_irq_add_prt(acpi_handle han
status = acpi_get_irq_routing_table(handle, &buffer);
if (ACPI_FAILURE(status)) {
- ACPI_DEBUG_PRINT((ACPI_DB_ERROR, "Error evaluating _PRT [%s]\n",
- acpi_format_exception(status)));
+ ACPI_EXCEPTION((AE_INFO, status, "Evaluating _PRT [%s]",
+ acpi_format_exception(status)));
kfree(buffer.pointer);
return_VALUE(-ENODEV);
}
@@ -269,8 +269,8 @@ acpi_pci_allocate_irq(struct acpi_prt_en
entry->link.index, triggering,
polarity, link);
if (irq < 0) {
- ACPI_DEBUG_PRINT((ACPI_DB_WARN,
- "Invalid IRQ link routing entry\n"));
+ ACPI_WARNING((AE_INFO,
+ "Invalid IRQ link routing entry"));
return_VALUE(-1);
}
} else {
@@ -379,9 +379,8 @@ acpi_pci_irq_derive(struct pci_dev *dev,
}
if (irq < 0) {
- ACPI_DEBUG_PRINT((ACPI_DB_WARN,
- "Unable to derive IRQ for device %s\n",
- pci_name(dev)));
+ ACPI_WARNING((AE_INFO, "Unable to derive IRQ for device %s",
+ pci_name(dev)));
return_VALUE(-1);
}
@@ -421,8 +420,7 @@ int acpi_pci_irq_enable(struct pci_dev *
pin--;
if (!dev->bus) {
- ACPI_DEBUG_PRINT((ACPI_DB_ERROR,
- "Invalid (NULL) 'bus' field\n"));
+ ACPI_ERROR((AE_INFO, "Invalid (NULL) 'bus' field"));
return_VALUE(-ENODEV);
}
Index: linux-2.6.15/drivers/acpi/pci_link.c
===================================================================
--- linux-2.6.15.orig/drivers/acpi/pci_link.c
+++ linux-2.6.15/drivers/acpi/pci_link.c
@@ -115,17 +115,15 @@ acpi_pci_link_check_possible(struct acpi
{
struct acpi_resource_irq *p = &resource->data.irq;
if (!p || !p->interrupt_count) {
- ACPI_DEBUG_PRINT((ACPI_DB_WARN,
- "Blank IRQ resource\n"));
+ ACPI_WARNING((AE_INFO, "Blank IRQ resource"));
return_ACPI_STATUS(AE_OK);
}
for (i = 0;
(i < p->interrupt_count
&& i < ACPI_PCI_LINK_MAX_POSSIBLE); i++) {
if (!p->interrupts[i]) {
- ACPI_DEBUG_PRINT((ACPI_DB_WARN,
- "Invalid IRQ %d\n",
- p->interrupts[i]));
+ ACPI_WARNING((AE_INFO, "Invalid IRQ %d",
+ p->interrupts[i]));
continue;
}
link->irq.possible[i] = p->interrupts[i];
@@ -141,17 +139,16 @@ acpi_pci_link_check_possible(struct acpi
struct acpi_resource_extended_irq *p =
&resource->data.extended_irq;
if (!p || !p->interrupt_count) {
- ACPI_DEBUG_PRINT((ACPI_DB_WARN,
- "Blank EXT IRQ resource\n"));
+ ACPI_WARNING((AE_INFO,
+ "Blank EXT IRQ resource"));
return_ACPI_STATUS(AE_OK);
}
for (i = 0;
(i < p->interrupt_count
&& i < ACPI_PCI_LINK_MAX_POSSIBLE); i++) {
if (!p->interrupts[i]) {
- ACPI_DEBUG_PRINT((ACPI_DB_WARN,
- "Invalid IRQ %d\n",
- p->interrupts[i]));
+ ACPI_WARNING((AE_INFO, "Invalid IRQ %d",
+ p->interrupts[i]));
continue;
}
link->irq.possible[i] = p->interrupts[i];
@@ -163,8 +160,7 @@ acpi_pci_link_check_possible(struct acpi
break;
}
default:
- ACPI_DEBUG_PRINT((ACPI_DB_ERROR,
- "Resource is not an IRQ entry\n"));
+ ACPI_ERROR((AE_INFO, "Resource is not an IRQ entry\n"));
return_ACPI_STATUS(AE_OK);
}
@@ -183,7 +179,7 @@ static int acpi_pci_link_get_possible(st
status = acpi_walk_resources(link->handle, METHOD_NAME__PRS,
acpi_pci_link_check_possible, link);
if (ACPI_FAILURE(status)) {
- ACPI_DEBUG_PRINT((ACPI_DB_ERROR, "Error evaluating _PRS\n"));
+ ACPI_EXCEPTION((AE_INFO, status, "Evaluating _PRS"));
return_VALUE(-ENODEV);
}
@@ -226,8 +222,8 @@ acpi_pci_link_check_current(struct acpi_
* extended IRQ descriptors must
* return at least 1 IRQ
*/
- ACPI_DEBUG_PRINT((ACPI_DB_WARN,
- "Blank EXT IRQ resource\n"));
+ ACPI_WARNING((AE_INFO,
+ "Blank EXT IRQ resource"));
return_ACPI_STATUS(AE_OK);
}
*irq = p->interrupts[0];
@@ -235,7 +231,7 @@ acpi_pci_link_check_current(struct acpi_
}
break;
default:
- ACPI_DEBUG_PRINT((ACPI_DB_ERROR, "Resource %d isn't an IRQ\n", resource->type));
+ ACPI_ERROR((AE_INFO, "Resource %d isn't an IRQ", resource->type));
case ACPI_RESOURCE_TYPE_END_TAG:
return_ACPI_STATUS(AE_OK);
}
@@ -267,8 +263,7 @@ static int acpi_pci_link_get_current(str
/* Query _STA, set link->device->status */
result = acpi_bus_get_status(link->device);
if (result) {
- ACPI_DEBUG_PRINT((ACPI_DB_ERROR,
- "Unable to read status\n"));
+ ACPI_ERROR((AE_INFO, "Unable to read status"));
goto end;
}
@@ -285,13 +280,13 @@ static int acpi_pci_link_get_current(str
status = acpi_walk_resources(link->handle, METHOD_NAME__CRS,
acpi_pci_link_check_current, &irq);
if (ACPI_FAILURE(status)) {
- ACPI_DEBUG_PRINT((ACPI_DB_ERROR, "Error evaluating _CRS\n"));
+ ACPI_EXCEPTION((AE_INFO, status, "Evaluating _CRS"));
result = -ENODEV;
goto end;
}
if (acpi_strict && !irq) {
- ACPI_DEBUG_PRINT((ACPI_DB_ERROR, "_CRS returned 0\n"));
+ ACPI_ERROR((AE_INFO, "_CRS returned 0"));
result = -ENODEV;
}
@@ -361,7 +356,7 @@ static int acpi_pci_link_set(struct acpi
/* ignore resource_source, it's optional */
break;
default:
- printk("ACPI BUG: resource_type %d\n", link->irq.resource_type);
+ ACPI_ERROR((AE_INFO, "Invalid Resource_type %d\n", link->irq.resource_type));
result = -EINVAL;
goto end;
@@ -373,7 +368,7 @@ static int acpi_pci_link_set(struct acpi
/* check for total failure */
if (ACPI_FAILURE(status)) {
- ACPI_DEBUG_PRINT((ACPI_DB_ERROR, "Error evaluating _SRS\n"));
+ ACPI_EXCEPTION((AE_INFO, status, "Evaluating _SRS"));
result = -ENODEV;
goto end;
}
@@ -381,14 +376,14 @@ static int acpi_pci_link_set(struct acpi
/* Query _STA, set device->status */
result = acpi_bus_get_status(link->device);
if (result) {
- ACPI_DEBUG_PRINT((ACPI_DB_ERROR, "Unable to read status\n"));
+ ACPI_ERROR((AE_INFO, "Unable to read status"));
goto end;
}
if (!link->device->status.enabled) {
- printk(KERN_WARNING PREFIX
- "%s [%s] disabled and referenced, BIOS bug.\n",
- acpi_device_name(link->device),
- acpi_device_bid(link->device));
+ ACPI_WARNING((AE_INFO,
+ "%s [%s] disabled and referenced, BIOS bug",
+ acpi_device_name(link->device),
+ acpi_device_bid(link->device)));
}
/* Query _CRS, set link->irq.active */
@@ -406,10 +401,10 @@ static int acpi_pci_link_set(struct acpi
* policy: when _CRS doesn't return what we just _SRS
* assume _SRS worked and override _CRS value.
*/
- printk(KERN_WARNING PREFIX
- "%s [%s] BIOS reported IRQ %d, using IRQ %d\n",
- acpi_device_name(link->device),
- acpi_device_bid(link->device), link->irq.active, irq);
+ ACPI_WARNING((AE_INFO,
+ "%s [%s] BIOS reported IRQ %d, using IRQ %d",
+ acpi_device_name(link->device),
+ acpi_device_bid(link->device), link->irq.active, irq));
link->irq.active = irq;
}
@@ -500,8 +495,7 @@ int __init acpi_irq_penalty_init(void)
link = list_entry(node, struct acpi_pci_link, node);
if (!link) {
- ACPI_DEBUG_PRINT((ACPI_DB_ERROR,
- "Invalid link context\n"));
+ ACPI_ERROR((AE_INFO, "Invalid link context"));
continue;
}
@@ -560,8 +554,8 @@ static int acpi_pci_link_allocate(struct
*/
if (i == link->irq.possible_count) {
if (acpi_strict)
- printk(KERN_WARNING PREFIX "_CRS %d not found"
- " in _PRS\n", link->irq.active);
+ ACPI_WARNING((AE_INFO, "_CRS %d not found"
+ " in _PRS", link->irq.active));
link->irq.active = 0;
}
@@ -588,11 +582,10 @@ static int acpi_pci_link_allocate(struct
/* Attempt to enable the link device at this IRQ. */
if (acpi_pci_link_set(link, irq)) {
- printk(PREFIX
- "Unable to set IRQ for %s [%s] (likely buggy ACPI BIOS).\n"
- "Try pci=noacpi or acpi=off\n",
- acpi_device_name(link->device),
- acpi_device_bid(link->device));
+ ACPI_ERROR((AE_INFO, "Unable to set IRQ for %s [%s]. "
+ "Try pci=noacpi or acpi=off",
+ acpi_device_name(link->device),
+ acpi_device_bid(link->device)));
return_VALUE(-ENODEV);
} else {
acpi_irq_penalty[link->irq.active] += PIRQ_PENALTY_PCI_USING;
@@ -625,19 +618,19 @@ acpi_pci_link_allocate_irq(acpi_handle h
result = acpi_bus_get_device(handle, &device);
if (result) {
- ACPI_DEBUG_PRINT((ACPI_DB_ERROR, "Invalid link device\n"));
+ ACPI_ERROR((AE_INFO, "Invalid link device"));
return_VALUE(-1);
}
link = (struct acpi_pci_link *)acpi_driver_data(device);
if (!link) {
- ACPI_DEBUG_PRINT((ACPI_DB_ERROR, "Invalid link context\n"));
+ ACPI_ERROR((AE_INFO, "Invalid link context"));
return_VALUE(-1);
}
/* TBD: Support multiple index (IRQ) entries per Link Device */
if (index) {
- ACPI_DEBUG_PRINT((ACPI_DB_ERROR, "Invalid index %d\n", index));
+ ACPI_ERROR((AE_INFO, "Invalid index %d", index));
return_VALUE(-1);
}
@@ -649,7 +642,7 @@ acpi_pci_link_allocate_irq(acpi_handle h
if (!link->irq.active) {
up(&acpi_link_lock);
- ACPI_DEBUG_PRINT((ACPI_DB_ERROR, "Link active IRQ is 0!\n"));
+ ACPI_ERROR((AE_INFO, "Link active IRQ is 0!"));
return_VALUE(-1);
}
link->refcnt++;
@@ -681,20 +674,20 @@ int acpi_pci_link_free_irq(acpi_handle h
result = acpi_bus_get_device(handle, &device);
if (result) {
- ACPI_DEBUG_PRINT((ACPI_DB_ERROR, "Invalid link device\n"));
+ ACPI_ERROR((AE_INFO, "Invalid link device"));
return_VALUE(-1);
}
link = (struct acpi_pci_link *)acpi_driver_data(device);
if (!link) {
- ACPI_DEBUG_PRINT((ACPI_DB_ERROR, "Invalid link context\n"));
+ ACPI_ERROR((AE_INFO, "Invalid link context"));
return_VALUE(-1);
}
down(&acpi_link_lock);
if (!link->irq.initialized) {
up(&acpi_link_lock);
- ACPI_DEBUG_PRINT((ACPI_DB_ERROR, "Link isn't initialized\n"));
+ ACPI_ERROR((AE_INFO, "Link isn't initialized"));
return_VALUE(-1);
}
#ifdef FUTURE_USE
@@ -816,8 +809,7 @@ static int irqrouter_resume(struct sys_d
list_for_each(node, &acpi_link.entries) {
link = list_entry(node, struct acpi_pci_link, node);
if (!link) {
- ACPI_DEBUG_PRINT((ACPI_DB_ERROR,
- "Invalid link context\n"));
+ ACPI_ERROR((AE_INFO, "Invalid link context"));
continue;
}
acpi_pci_link_resume(link);
Index: linux-2.6.15/drivers/acpi/pci_root.c
===================================================================
--- linux-2.6.15.orig/drivers/acpi/pci_root.c
+++ linux-2.6.15/drivers/acpi/pci_root.c
@@ -198,7 +198,7 @@ static int acpi_pci_root_add(struct acpi
root->id.segment = 0;
break;
default:
- ACPI_DEBUG_PRINT((ACPI_DB_ERROR, "Error evaluating _SEG\n"));
+ ACPI_EXCEPTION((AE_INFO, status, "Evaluating _SEG"));
result = -ENODEV;
goto end;
}
@@ -219,7 +219,7 @@ static int acpi_pci_root_add(struct acpi
root->id.bus = 0;
break;
default:
- ACPI_DEBUG_PRINT((ACPI_DB_ERROR, "Error evaluating _BBN\n"));
+ ACPI_EXCEPTION((AE_INFO, status, "Evaluating _BBN"));
result = -ENODEV;
goto end;
}
@@ -231,8 +231,9 @@ static int acpi_pci_root_add(struct acpi
int bus = 0;
acpi_status status;
- ACPI_DEBUG_PRINT((ACPI_DB_ERROR,
- "Wrong _BBN value, please reboot and using option 'pci=noacpi'\n"));
+ ACPI_ERROR((AE_INFO,
+ "Wrong _BBN value, reboot"
+ " and use option 'pci=noacpi'"));
status = try_get_root_bridge_busnr(root->handle, &bus);
if (ACPI_FAILURE(status))
@@ -273,9 +274,9 @@ static int acpi_pci_root_add(struct acpi
*/
root->bus = pci_acpi_scan_root(device, root->id.segment, root->id.bus);
if (!root->bus) {
- ACPI_DEBUG_PRINT((ACPI_DB_ERROR,
- "Bus %04x:%02x not present in PCI namespace\n",
- root->id.segment, root->id.bus));
+ ACPI_ERROR((AE_INFO,
+ "Bus %04x:%02x not present in PCI namespace",
+ root->id.segment, root->id.bus));
result = -ENODEV;
goto end;
}
Index: linux-2.6.15/drivers/acpi/power.c
===================================================================
--- linux-2.6.15.orig/drivers/acpi/power.c
+++ linux-2.6.15/drivers/acpi/power.c
@@ -105,8 +105,7 @@ acpi_power_get_context(acpi_handle handl
result = acpi_bus_get_device(handle, &device);
if (result) {
- ACPI_DEBUG_PRINT((ACPI_DB_WARN, "Error getting context [%p]\n",
- handle));
+ ACPI_WARNING((AE_INFO, "Getting context [%p]", handle));
return_VALUE(result);
}
@@ -292,8 +291,7 @@ int acpi_enable_wakeup_device_power(stru
for (i = 0; i < dev->wakeup.resources.count; i++) {
ret = acpi_power_on(dev->wakeup.resources.handles[i]);
if (ret) {
- ACPI_DEBUG_PRINT((ACPI_DB_ERROR,
- "Error transition power state\n"));
+ ACPI_ERROR((AE_INFO, "Transition power state"));
dev->wakeup.flags.valid = 0;
return_VALUE(-1);
}
@@ -302,7 +300,7 @@ int acpi_enable_wakeup_device_power(stru
/* Execute PSW */
status = acpi_evaluate_object(dev->handle, "_PSW", &arg_list, NULL);
if (ACPI_FAILURE(status) && (status != AE_NOT_FOUND)) {
- ACPI_DEBUG_PRINT((ACPI_DB_ERROR, "Error evaluate _PSW\n"));
+ ACPI_ERROR((AE_INFO, "Evaluate _PSW"));
dev->wakeup.flags.valid = 0;
ret = -1;
}
@@ -332,7 +330,7 @@ int acpi_disable_wakeup_device_power(str
/* Execute PSW */
status = acpi_evaluate_object(dev->handle, "_PSW", &arg_list, NULL);
if (ACPI_FAILURE(status) && (status != AE_NOT_FOUND)) {
- ACPI_DEBUG_PRINT((ACPI_DB_ERROR, "Error evaluate _PSW\n"));
+ ACPI_ERROR((AE_INFO, "Evaluate _PSW"));
dev->wakeup.flags.valid = 0;
return_VALUE(-1);
}
@@ -341,8 +339,7 @@ int acpi_disable_wakeup_device_power(str
for (i = 0; i < dev->wakeup.resources.count; i++) {
ret = acpi_power_off_device(dev->wakeup.resources.handles[i]);
if (ret) {
- ACPI_DEBUG_PRINT((ACPI_DB_ERROR,
- "Error transition power state\n"));
+ ACPI_ERROR((AE_INFO, "Transition power state"));
dev->wakeup.flags.valid = 0;
return_VALUE(-1);
}
@@ -444,9 +441,8 @@ int acpi_power_transition(struct acpi_de
device->power.state = state;
end:
if (result)
- ACPI_DEBUG_PRINT((ACPI_DB_WARN,
- "Error transitioning device [%s] to D%d\n",
- device->pnp.bus_id, state));
+ ACPI_WARNING((AE_INFO, "Transitioning device [%s] to D%d",
+ device->pnp.bus_id, state));
return_VALUE(result);
}
@@ -516,9 +512,7 @@ static int acpi_power_add_fs(struct acpi
entry = create_proc_entry(ACPI_POWER_FILE_STATUS,
S_IRUGO, acpi_device_dir(device));
if (!entry)
- ACPI_DEBUG_PRINT((ACPI_DB_ERROR,
- "Unable to create '%s' fs entry\n",
- ACPI_POWER_FILE_STATUS));
+ return_VALUE(-EIO);
else {
entry->proc_fops = &acpi_power_fops;
entry->data = acpi_driver_data(device);
Index: linux-2.6.15/drivers/acpi/processor_core.c
===================================================================
--- linux-2.6.15.orig/drivers/acpi/processor_core.c
+++ linux-2.6.15/drivers/acpi/processor_core.c
@@ -328,9 +328,7 @@ static int acpi_processor_add_fs(struct
entry = create_proc_entry(ACPI_PROCESSOR_FILE_INFO,
S_IRUGO, acpi_device_dir(device));
if (!entry)
- ACPI_DEBUG_PRINT((ACPI_DB_ERROR,
- "Unable to create '%s' fs entry\n",
- ACPI_PROCESSOR_FILE_INFO));
+ return_VALUE(-EIO);
else {
entry->proc_fops = &acpi_processor_info_fops;
entry->data = acpi_driver_data(device);
@@ -342,9 +340,7 @@ static int acpi_processor_add_fs(struct
S_IFREG | S_IRUGO | S_IWUSR,
acpi_device_dir(device));
if (!entry)
- ACPI_DEBUG_PRINT((ACPI_DB_ERROR,
- "Unable to create '%s' fs entry\n",
- ACPI_PROCESSOR_FILE_THROTTLING));
+ return_VALUE(-EIO);
else {
entry->proc_fops = &acpi_processor_throttling_fops;
entry->data = acpi_driver_data(device);
@@ -356,9 +352,7 @@ static int acpi_processor_add_fs(struct
S_IFREG | S_IRUGO | S_IWUSR,
acpi_device_dir(device));
if (!entry)
- ACPI_DEBUG_PRINT((ACPI_DB_ERROR,
- "Unable to create '%s' fs entry\n",
- ACPI_PROCESSOR_FILE_LIMIT));
+ return_VALUE( -EIO);
else {
entry->proc_fops = &acpi_processor_limit_fops;
entry->data = acpi_driver_data(device);
@@ -459,8 +453,7 @@ static int acpi_processor_get_info(struc
*/
status = acpi_evaluate_object(pr->handle, NULL, NULL, &buffer);
if (ACPI_FAILURE(status)) {
- ACPI_DEBUG_PRINT((ACPI_DB_ERROR,
- "Error evaluating processor object\n"));
+ ACPI_ERROR((AE_INFO, "Evaluating processor object"));
return_VALUE(-ENODEV);
}
@@ -490,9 +483,9 @@ static int acpi_processor_get_info(struc
if (cpu_index >= NR_CPUS) {
if (ACPI_FAILURE
(acpi_processor_hotadd_init(pr->handle, &pr->id))) {
- ACPI_DEBUG_PRINT((ACPI_DB_ERROR,
- "Error getting cpuindex for acpiid 0x%x\n",
- pr->acpi_id));
+ ACPI_ERROR((AE_INFO,
+ "Getting cpuindex for acpiid 0x%x",
+ pr->acpi_id));
return_VALUE(-ENODEV);
}
}
@@ -503,8 +496,8 @@ static int acpi_processor_get_info(struc
if (!object.processor.pblk_address)
ACPI_DEBUG_PRINT((ACPI_DB_INFO, "No PBLK (NULL address)\n"));
else if (object.processor.pblk_length != 6)
- ACPI_DEBUG_PRINT((ACPI_DB_ERROR, "Invalid PBLK length [%d]\n",
- object.processor.pblk_length));
+ ACPI_ERROR((AE_INFO, "Invalid PBLK length [%d]",
+ object.processor.pblk_length));
else {
pr->throttling.address = object.processor.pblk_address;
pr->throttling.duty_offset = acpi_fadt.duty_offset;
@@ -558,8 +551,8 @@ static int acpi_processor_start(struct a
*/
if (processor_device_array[pr->id] != NULL &&
processor_device_array[pr->id] != (void *)device) {
- ACPI_DEBUG_PRINT((ACPI_DB_ERROR, "BIOS reporting wrong ACPI id"
- "for the processor\n"));
+ ACPI_WARNING((AE_INFO, "BIOS reporting wrong ACPI id"
+ "for the processor"));
return_VALUE(-ENODEV);
}
processor_device_array[pr->id] = (void *)device;
@@ -572,10 +565,6 @@ static int acpi_processor_start(struct a
status = acpi_install_notify_handler(pr->handle, ACPI_DEVICE_NOTIFY,
acpi_processor_notify, pr);
- if (ACPI_FAILURE(status)) {
- ACPI_DEBUG_PRINT((ACPI_DB_ERROR,
- "Error installing device notify handler\n"));
- }
/* _PDC call should be done before doing anything else (if reqd.). */
arch_acpi_processor_init_pdc(pr);
@@ -675,10 +664,6 @@ static int acpi_processor_remove(struct
status = acpi_remove_notify_handler(pr->handle, ACPI_DEVICE_NOTIFY,
acpi_processor_notify);
- if (ACPI_FAILURE(status)) {
- ACPI_DEBUG_PRINT((ACPI_DB_ERROR,
- "Error removing notify handler\n"));
- }
acpi_processor_remove_fs(device);
@@ -705,8 +690,7 @@ static int is_processor_present(acpi_han
status = acpi_evaluate_integer(handle, "_STA", NULL, &sta);
if (ACPI_FAILURE(status) || !(sta & ACPI_STA_PRESENT)) {
- ACPI_DEBUG_PRINT((ACPI_DB_ERROR,
- "Processor Device is not present\n"));
+ ACPI_EXCEPTION((AE_INFO, status, "Processor Device is not present"));
return_VALUE(0);
}
return_VALUE(1);
@@ -767,15 +751,14 @@ acpi_processor_hotplug_notify(acpi_handl
if (acpi_bus_get_device(handle, &device)) {
result = acpi_processor_device_add(handle, &device);
if (result)
- ACPI_DEBUG_PRINT((ACPI_DB_ERROR,
- "Unable to add the device\n"));
+ ACPI_ERROR((AE_INFO,
+ "Unable to add the device"));
break;
}
pr = acpi_driver_data(device);
if (!pr) {
- ACPI_DEBUG_PRINT((ACPI_DB_ERROR,
- "Driver data is NULL\n"));
+ ACPI_ERROR((AE_INFO, "Driver data is NULL"));
break;
}
@@ -788,9 +771,8 @@ acpi_processor_hotplug_notify(acpi_handl
if ((!result) && ((pr->id >= 0) && (pr->id < NR_CPUS))) {
kobject_uevent(&device->kobj, KOBJ_ONLINE);
} else {
- ACPI_DEBUG_PRINT((ACPI_DB_ERROR,
- "Device [%s] failed to start\n",
- acpi_device_bid(device)));
+ ACPI_ERROR((AE_INFO, "Device [%s] failed to start",
+ acpi_device_bid(device)));
}
break;
case ACPI_NOTIFY_EJECT_REQUEST:
@@ -798,14 +780,14 @@ acpi_processor_hotplug_notify(acpi_handl
"received ACPI_NOTIFY_EJECT_REQUEST\n"));
if (acpi_bus_get_device(handle, &device)) {
- ACPI_DEBUG_PRINT((ACPI_DB_ERROR,
- "Device don't exist, dropping EJECT\n"));
+ ACPI_ERROR((AE_INFO,
+ "Device don't exist, dropping EJECT"));
break;
}
pr = acpi_driver_data(device);
if (!pr) {
- ACPI_DEBUG_PRINT((ACPI_DB_ERROR,
- "Driver data is NULL, dropping EJECT\n"));
+ ACPI_ERROR((AE_INFO,
+ "Driver data is NULL, dropping EJECT"));
return_VOID;
}
Index: linux-2.6.15/drivers/acpi/processor_idle.c
===================================================================
--- linux-2.6.15.orig/drivers/acpi/processor_idle.c
+++ linux-2.6.15/drivers/acpi/processor_idle.c
@@ -663,8 +663,7 @@ static int acpi_processor_get_power_info
/* There must be at least 2 elements */
if (!cst || (cst->type != ACPI_TYPE_PACKAGE) || cst->package.count < 2) {
- ACPI_DEBUG_PRINT((ACPI_DB_ERROR,
- "not enough elements in _CST\n"));
+ ACPI_ERROR((AE_INFO, "not enough elements in _CST"));
status = -EFAULT;
goto end;
}
@@ -673,8 +672,7 @@ static int acpi_processor_get_power_info
/* Validate number of power states. */
if (count < 1 || count != cst->package.count - 1) {
- ACPI_DEBUG_PRINT((ACPI_DB_ERROR,
- "count given by _CST is not valid\n"));
+ ACPI_ERROR((AE_INFO, "count given by _CST is not valid"));
status = -EFAULT;
goto end;
}
@@ -1094,8 +1092,8 @@ int acpi_processor_power_init(struct acp
status =
acpi_os_write_port(acpi_fadt.smi_cmd, acpi_fadt.cst_cnt, 8);
if (ACPI_FAILURE(status)) {
- ACPI_DEBUG_PRINT((ACPI_DB_ERROR,
- "Notifying BIOS of _CST ability failed\n"));
+ ACPI_EXCEPTION((AE_INFO, status,
+ "Notifying BIOS of _CST ability failed"));
}
}
@@ -1124,9 +1122,7 @@ int acpi_processor_power_init(struct acp
entry = create_proc_entry(ACPI_PROCESSOR_FILE_POWER,
S_IRUGO, acpi_device_dir(device));
if (!entry)
- ACPI_DEBUG_PRINT((ACPI_DB_ERROR,
- "Unable to create '%s' fs entry\n",
- ACPI_PROCESSOR_FILE_POWER));
+ return -EIO;
else {
entry->proc_fops = &acpi_processor_power_fops;
entry->data = acpi_driver_data(device);
Index: linux-2.6.15/drivers/acpi/processor_perflib.c
===================================================================
--- linux-2.6.15.orig/drivers/acpi/processor_perflib.c
+++ linux-2.6.15/drivers/acpi/processor_perflib.c
@@ -122,7 +122,7 @@ static int acpi_processor_get_platform_l
acpi_processor_ppc_status |= PPC_IN_USE;
if (ACPI_FAILURE(status) && status != AE_NOT_FOUND) {
- ACPI_DEBUG_PRINT((ACPI_DB_ERROR, "Error evaluating _PPC\n"));
+ ACPI_EXCEPTION((AE_INFO, status, "Evaluating _PPC"));
return_VALUE(-ENODEV);
}
@@ -171,14 +171,14 @@ static int acpi_processor_get_performanc
status = acpi_evaluate_object(pr->handle, "_PCT", NULL, &buffer);
if (ACPI_FAILURE(status)) {
- ACPI_DEBUG_PRINT((ACPI_DB_ERROR, "Error evaluating _PCT\n"));
+ ACPI_EXCEPTION((AE_INFO, status, "Evaluating _PCT"));
return_VALUE(-ENODEV);
}
pct = (union acpi_object *)buffer.pointer;
if (!pct || (pct->type != ACPI_TYPE_PACKAGE)
|| (pct->package.count != 2)) {
- ACPI_DEBUG_PRINT((ACPI_DB_ERROR, "Invalid _PCT data\n"));
+ ACPI_ERROR((AE_INFO, "Invalid _PCT data"));
result = -EFAULT;
goto end;
}
@@ -192,8 +192,7 @@ static int acpi_processor_get_performanc
if ((obj.type != ACPI_TYPE_BUFFER)
|| (obj.buffer.length < sizeof(struct acpi_pct_register))
|| (obj.buffer.pointer == NULL)) {
- ACPI_DEBUG_PRINT((ACPI_DB_ERROR,
- "Invalid _PCT data (control_register)\n"));
+ ACPI_ERROR((AE_INFO, "Invalid _PCT data (control_register)"));
result = -EFAULT;
goto end;
}
@@ -209,8 +208,7 @@ static int acpi_processor_get_performanc
if ((obj.type != ACPI_TYPE_BUFFER)
|| (obj.buffer.length < sizeof(struct acpi_pct_register))
|| (obj.buffer.pointer == NULL)) {
- ACPI_DEBUG_PRINT((ACPI_DB_ERROR,
- "Invalid _PCT data (status_register)\n"));
+ ACPI_ERROR((AE_INFO, "Invalid _PCT data (status_register)"));
result = -EFAULT;
goto end;
}
@@ -238,13 +236,13 @@ static int acpi_processor_get_performanc
status = acpi_evaluate_object(pr->handle, "_PSS", NULL, &buffer);
if (ACPI_FAILURE(status)) {
- ACPI_DEBUG_PRINT((ACPI_DB_ERROR, "Error evaluating _PSS\n"));
+ ACPI_EXCEPTION((AE_INFO, status, "Evaluating _PSS"));
return_VALUE(-ENODEV);
}
pss = (union acpi_object *)buffer.pointer;
if (!pss || (pss->type != ACPI_TYPE_PACKAGE)) {
- ACPI_DEBUG_PRINT((ACPI_DB_ERROR, "Invalid _PSS data\n"));
+ ACPI_ERROR((AE_INFO, "Invalid _PSS data"));
result = -EFAULT;
goto end;
}
@@ -273,8 +271,7 @@ static int acpi_processor_get_performanc
status = acpi_extract_package(&(pss->package.elements[i]),
&format, &state);
if (ACPI_FAILURE(status)) {
- ACPI_DEBUG_PRINT((ACPI_DB_ERROR,
- "Invalid _PSS data\n"));
+ ACPI_EXCEPTION((AE_INFO, status, "Invalid _PSS data"));
result = -EFAULT;
kfree(pr->performance->states);
goto end;
@@ -290,8 +287,8 @@ static int acpi_processor_get_performanc
(u32) px->control, (u32) px->status));
if (!px->core_frequency) {
- ACPI_DEBUG_PRINT((ACPI_DB_ERROR,
- "Invalid _PSS data: freq is zero\n"));
+ ACPI_ERROR((AE_INFO,
+ "Invalid _PSS data: freq is zero"));
result = -EFAULT;
kfree(pr->performance->states);
goto end;
@@ -386,10 +383,10 @@ int acpi_processor_notify_smm(struct mod
status = acpi_os_write_port(acpi_fadt.smi_cmd,
(u32) acpi_fadt.pstate_cnt, 8);
if (ACPI_FAILURE(status)) {
- ACPI_DEBUG_PRINT((ACPI_DB_ERROR,
- "Failed to write pstate_cnt [0x%x] to "
- "smi_cmd [0x%x]\n", acpi_fadt.pstate_cnt,
- acpi_fadt.smi_cmd));
+ ACPI_EXCEPTION((AE_INFO, status,
+ "Failed to write pstate_cnt [0x%x] to "
+ "smi_cmd [0x%x]", acpi_fadt.pstate_cnt,
+ acpi_fadt.smi_cmd));
module_put(calling_module);
return_VALUE(status);
}
@@ -513,11 +510,7 @@ static void acpi_cpufreq_add_file(struct
entry = create_proc_entry(ACPI_PROCESSOR_FILE_PERFORMANCE,
S_IFREG | S_IRUGO | S_IWUSR,
acpi_device_dir(device));
- if (!entry)
- ACPI_DEBUG_PRINT((ACPI_DB_ERROR,
- "Unable to create '%s' fs entry\n",
- ACPI_PROCESSOR_FILE_PERFORMANCE));
- else {
+ if (entry){
acpi_processor_perf_fops.write = acpi_processor_write_performance;
entry->proc_fops = &acpi_processor_perf_fops;
entry->data = acpi_driver_data(device);
Index: linux-2.6.15/drivers/acpi/processor_thermal.c
===================================================================
--- linux-2.6.15.orig/drivers/acpi/processor_thermal.c
+++ linux-2.6.15/drivers/acpi/processor_thermal.c
@@ -82,7 +82,7 @@ static int acpi_processor_apply_limit(st
end:
if (result)
- ACPI_DEBUG_PRINT((ACPI_DB_ERROR, "Unable to set limit\n"));
+ ACPI_ERROR((AE_INFO, "Unable to set limit"));
return_VALUE(result);
}
@@ -289,8 +289,7 @@ int acpi_processor_set_thermal_limit(acp
result = acpi_processor_apply_limit(pr);
if (result)
- ACPI_DEBUG_PRINT((ACPI_DB_ERROR,
- "Unable to set thermal limit\n"));
+ ACPI_ERROR((AE_INFO, "Unable to set thermal limit"));
ACPI_DEBUG_PRINT((ACPI_DB_INFO, "Thermal limit now (P%d:T%d)\n",
pr->limit.thermal.px, pr->limit.thermal.tx));
@@ -362,25 +361,23 @@ static ssize_t acpi_processor_write_limi
ACPI_FUNCTION_TRACE("acpi_processor_write_limit");
if (!pr || (count > sizeof(limit_string) - 1)) {
- ACPI_DEBUG_PRINT((ACPI_DB_ERROR, "Invalid argument\n"));
return_VALUE(-EINVAL);
}
if (copy_from_user(limit_string, buffer, count)) {
- ACPI_DEBUG_PRINT((ACPI_DB_ERROR, "Invalid data\n"));
return_VALUE(-EFAULT);
}
limit_string[count] = '\0';
if (sscanf(limit_string, "%d:%d", &px, &tx) != 2) {
- ACPI_DEBUG_PRINT((ACPI_DB_ERROR, "Invalid data format\n"));
+ ACPI_ERROR((AE_INFO, "Invalid data format"));
return_VALUE(-EINVAL);
}
if (pr->flags.throttling) {
if ((tx < 0) || (tx > (pr->throttling.state_count - 1))) {
- ACPI_DEBUG_PRINT((ACPI_DB_ERROR, "Invalid tx\n"));
+ ACPI_ERROR((AE_INFO, "Invalid tx"));
return_VALUE(-EINVAL);
}
pr->limit.user.tx = tx;
Index: linux-2.6.15/drivers/acpi/processor_throttling.c
===================================================================
--- linux-2.6.15.orig/drivers/acpi/processor_throttling.c
+++ linux-2.6.15/drivers/acpi/processor_throttling.c
@@ -196,7 +196,7 @@ int acpi_processor_get_throttling_info(s
}
/* TBD: Support duty_cycle values that span bit 4. */
else if ((pr->throttling.duty_offset + pr->throttling.duty_width) > 4) {
- ACPI_DEBUG_PRINT((ACPI_DB_WARN, "duty_cycle spans bit 4\n"));
+ ACPI_WARNING((AE_INFO, "duty_cycle spans bit 4"));
return_VALUE(0);
}
Index: linux-2.6.15/drivers/acpi/scan.c
===================================================================
--- linux-2.6.15.orig/drivers/acpi/scan.c
+++ linux-2.6.15/drivers/acpi/scan.c
@@ -321,15 +321,14 @@ static int acpi_bus_get_wakeup_device_fl
/* _PRW */
status = acpi_evaluate_object(device->handle, "_PRW", NULL, &buffer);
if (ACPI_FAILURE(status)) {
- ACPI_DEBUG_PRINT((ACPI_DB_ERROR, "Error evaluating _PRW\n"));
+ ACPI_EXCEPTION((AE_INFO, status, "Evaluating _PRW"));
goto end;
}
package = (union acpi_object *)buffer.pointer;
status = acpi_bus_extract_wakeup_device_power_package(device, package);
if (ACPI_FAILURE(status)) {
- ACPI_DEBUG_PRINT((ACPI_DB_ERROR,
- "Error extracting _PRW package\n"));
+ ACPI_EXCEPTION((AE_INFO, status, "Extracting _PRW package"));
goto end;
}
@@ -1001,7 +1000,7 @@ acpi_add_single_object(struct acpi_devic
device = kmalloc(sizeof(struct acpi_device), GFP_KERNEL);
if (!device) {
- ACPI_DEBUG_PRINT((ACPI_DB_ERROR, "Memory allocation error\n"));
+ ACPI_ERROR((AE_INFO, "Memory allocation error"));
return_VALUE(-ENOMEM);
}
memset(device, 0, sizeof(struct acpi_device));
Index: linux-2.6.15/drivers/acpi/thermal.c
===================================================================
--- linux-2.6.15.orig/drivers/acpi/thermal.c
+++ linux-2.6.15/drivers/acpi/thermal.c
@@ -323,7 +323,7 @@ static int acpi_thermal_get_trip_points(
&tz->trips.critical.temperature);
if (ACPI_FAILURE(status)) {
tz->trips.critical.flags.valid = 0;
- ACPI_DEBUG_PRINT((ACPI_DB_ERROR, "No critical threshold\n"));
+ ACPI_EXCEPTION((AE_INFO, status, "No critical threshold"));
return_VALUE(-ENODEV);
} else {
tz->trips.critical.flags.valid = 1;
@@ -382,8 +382,7 @@ static int acpi_thermal_get_trip_points(
tz->trips.passive.flags.valid = 0;
if (!tz->trips.passive.flags.valid)
- ACPI_DEBUG_PRINT((ACPI_DB_WARN,
- "Invalid passive threshold\n"));
+ ACPI_WARNING((AE_INFO, "Invalid passive threshold"));
else
ACPI_DEBUG_PRINT((ACPI_DB_INFO,
"Found passive threshold [%lu]\n",
@@ -412,9 +411,8 @@ static int acpi_thermal_get_trip_points(
"Found active threshold [%d]:[%lu]\n",
i, tz->trips.active[i].temperature));
} else
- ACPI_DEBUG_PRINT((ACPI_DB_ERROR,
- "Invalid active threshold [%d]\n",
- i));
+ ACPI_EXCEPTION((AE_INFO, status,
+ "Invalid active threshold [%d]", i));
}
return_VALUE(0);
@@ -469,7 +467,7 @@ static int acpi_thermal_critical(struct
return_VALUE(-EINVAL);
if (tz->temperature >= tz->trips.critical.temperature) {
- ACPI_DEBUG_PRINT((ACPI_DB_WARN, "Critical trip point\n"));
+ ACPI_WARNING((AE_INFO, "Critical trip point"));
tz->trips.critical.flags.enabled = 1;
} else if (tz->trips.critical.flags.enabled)
tz->trips.critical.flags.enabled = 0;
@@ -500,7 +498,7 @@ static int acpi_thermal_hot(struct acpi_
return_VALUE(-EINVAL);
if (tz->temperature >= tz->trips.hot.temperature) {
- ACPI_DEBUG_PRINT((ACPI_DB_WARN, "Hot trip point\n"));
+ ACPI_WARNING((AE_INFO, "Hot trip point"));
tz->trips.hot.flags.enabled = 1;
} else if (tz->trips.hot.flags.enabled)
tz->trips.hot.flags.enabled = 0;
@@ -640,10 +638,10 @@ static void acpi_thermal_active(struct a
handles[j],
ACPI_STATE_D0);
if (result) {
- ACPI_DEBUG_PRINT((ACPI_DB_WARN,
- "Unable to turn cooling device [%p] 'on'\n",
- active->devices.
- handles[j]));
+ ACPI_WARNING((AE_INFO,
+ "Unable to turn cooling device [%p] 'on'",
+ active->devices.
+ handles[j]));
continue;
}
active->flags.enabled = 1;
@@ -665,9 +663,9 @@ static void acpi_thermal_active(struct a
result = acpi_bus_set_power(active->devices.handles[j],
ACPI_STATE_D3);
if (result) {
- ACPI_DEBUG_PRINT((ACPI_DB_WARN,
- "Unable to turn cooling device [%p] 'off'\n",
- active->devices.handles[j]));
+ ACPI_WARNING((AE_INFO,
+ "Unable to turn cooling device [%p] 'off'",
+ active->devices.handles[j]));
continue;
}
active->flags.enabled = 0;
@@ -699,7 +697,7 @@ static void acpi_thermal_check(void *dat
ACPI_FUNCTION_TRACE("acpi_thermal_check");
if (!tz) {
- ACPI_DEBUG_PRINT((ACPI_DB_ERROR, "Invalid (NULL) context.\n"));
+ ACPI_ERROR((AE_INFO, "Invalid (NULL) context"));
return_VOID;
}
@@ -946,13 +944,11 @@ acpi_thermal_write_trip_points(struct fi
return_VALUE(-ENOMEM);
if (!tz || (count > ACPI_THERMAL_MAX_LIMIT_STR_LEN - 1)) {
- ACPI_DEBUG_PRINT((ACPI_DB_ERROR, "Invalid argument\n"));
count = -EINVAL;
goto end;
}
if (copy_from_user(limit_string, buffer, count)) {
- ACPI_DEBUG_PRINT((ACPI_DB_ERROR, "Invalid data\n"));
count = -EFAULT;
goto end;
}
@@ -965,7 +961,6 @@ acpi_thermal_write_trip_points(struct fi
&active[5], &active[6], &active[7], &active[8],
&active[9]);
if (!(num >= 5 && num < (ACPI_THERMAL_MAX_ACTIVE + 3))) {
- ACPI_DEBUG_PRINT((ACPI_DB_ERROR, "Invalid data format\n"));
count = -EINVAL;
goto end;
}
@@ -1125,9 +1120,7 @@ static int acpi_thermal_add_fs(struct ac
entry = create_proc_entry(ACPI_THERMAL_FILE_STATE,
S_IRUGO, acpi_device_dir(device));
if (!entry)
- ACPI_DEBUG_PRINT((ACPI_DB_ERROR,
- "Unable to create '%s' fs entry\n",
- ACPI_THERMAL_FILE_STATE));
+ return_VALUE(-ENODEV);
else {
entry->proc_fops = &acpi_thermal_state_fops;
entry->data = acpi_driver_data(device);
@@ -1138,9 +1131,7 @@ static int acpi_thermal_add_fs(struct ac
entry = create_proc_entry(ACPI_THERMAL_FILE_TEMPERATURE,
S_IRUGO, acpi_device_dir(device));
if (!entry)
- ACPI_DEBUG_PRINT((ACPI_DB_ERROR,
- "Unable to create '%s' fs entry\n",
- ACPI_THERMAL_FILE_TEMPERATURE));
+ return_VALUE(-ENODEV);
else {
entry->proc_fops = &acpi_thermal_temp_fops;
entry->data = acpi_driver_data(device);
@@ -1152,9 +1143,7 @@ static int acpi_thermal_add_fs(struct ac
S_IFREG | S_IRUGO | S_IWUSR,
acpi_device_dir(device));
if (!entry)
- ACPI_DEBUG_PRINT((ACPI_DB_ERROR,
- "Unable to create '%s' fs entry\n",
- ACPI_THERMAL_FILE_TRIP_POINTS));
+ return_VALUE(-ENODEV);
else {
entry->proc_fops = &acpi_thermal_trip_fops;
entry->data = acpi_driver_data(device);
@@ -1166,9 +1155,7 @@ static int acpi_thermal_add_fs(struct ac
S_IFREG | S_IRUGO | S_IWUSR,
acpi_device_dir(device));
if (!entry)
- ACPI_DEBUG_PRINT((ACPI_DB_ERROR,
- "Unable to create '%s' fs entry\n",
- ACPI_THERMAL_FILE_COOLING_MODE));
+ return_VALUE(-ENODEV);
else {
entry->proc_fops = &acpi_thermal_cooling_fops;
entry->data = acpi_driver_data(device);
@@ -1180,9 +1167,7 @@ static int acpi_thermal_add_fs(struct ac
S_IFREG | S_IRUGO | S_IWUSR,
acpi_device_dir(device));
if (!entry)
- ACPI_DEBUG_PRINT((ACPI_DB_ERROR,
- "Unable to create '%s' fs entry\n",
- ACPI_THERMAL_FILE_POLLING_FREQ));
+ return_VALUE(-ENODEV);
else {
entry->proc_fops = &acpi_thermal_polling_fops;
entry->data = acpi_driver_data(device);
@@ -1352,8 +1337,6 @@ static int acpi_thermal_add(struct acpi_
ACPI_DEVICE_NOTIFY,
acpi_thermal_notify, tz);
if (ACPI_FAILURE(status)) {
- ACPI_DEBUG_PRINT((ACPI_DB_ERROR,
- "Error installing notify handler\n"));
result = -ENODEV;
goto end;
}
@@ -1395,9 +1378,6 @@ static int acpi_thermal_remove(struct ac
status = acpi_remove_notify_handler(tz->handle,
ACPI_DEVICE_NOTIFY,
acpi_thermal_notify);
- if (ACPI_FAILURE(status))
- ACPI_DEBUG_PRINT((ACPI_DB_ERROR,
- "Error removing notify handler\n"));
/* Terminate policy */
if (tz->trips.passive.flags.valid && tz->trips.passive.flags.enabled) {
Index: linux-2.6.15/drivers/acpi/utils.c
===================================================================
--- linux-2.6.15.orig/drivers/acpi/utils.c
+++ linux-2.6.15/drivers/acpi/utils.c
@@ -62,26 +62,25 @@ acpi_extract_package(union acpi_object *
if (!package || (package->type != ACPI_TYPE_PACKAGE)
|| (package->package.count < 1)) {
- ACPI_DEBUG_PRINT((ACPI_DB_WARN,
- "Invalid 'package' argument\n"));
+ ACPI_WARNING((AE_INFO, "Invalid package argument"));
return_ACPI_STATUS(AE_BAD_PARAMETER);
}
if (!format || !format->pointer || (format->length < 1)) {
- ACPI_DEBUG_PRINT((ACPI_DB_WARN, "Invalid 'format' argument\n"));
+ ACPI_WARNING((AE_INFO, "Invalid format argument"));
return_ACPI_STATUS(AE_BAD_PARAMETER);
}
if (!buffer) {
- ACPI_DEBUG_PRINT((ACPI_DB_WARN, "Invalid 'buffer' argument\n"));
+ ACPI_WARNING((AE_INFO, "Invalid buffer argument"));
return_ACPI_STATUS(AE_BAD_PARAMETER);
}
format_count = (format->length / sizeof(char)) - 1;
if (format_count > package->package.count) {
- ACPI_DEBUG_PRINT((ACPI_DB_WARN,
- "Format specifies more objects [%d] than exist in package [%d].",
- format_count, package->package.count));
+ ACPI_WARNING((AE_INFO, "Format specifies more objects [%d]"
+ " than exist in package [%d].",
+ format_count, package->package.count));
return_ACPI_STATUS(AE_BAD_DATA);
}
@@ -113,9 +112,10 @@ acpi_extract_package(union acpi_object *
tail_offset += sizeof(char *);
break;
default:
- ACPI_DEBUG_PRINT((ACPI_DB_WARN,
- "Invalid package element [%d]: got number, expecing [%c].\n",
- i, format_string[i]));
+ ACPI_WARNING((AE_INFO, "Invalid package element"
+ " [%d]: got number, expecing"
+ " [%c]",
+ i, format_string[i]));
return_ACPI_STATUS(AE_BAD_DATA);
break;
}
@@ -138,9 +138,10 @@ acpi_extract_package(union acpi_object *
tail_offset += sizeof(u8 *);
break;
default:
- ACPI_DEBUG_PRINT((ACPI_DB_WARN,
- "Invalid package element [%d] got string/buffer, expecing [%c].\n",
- i, format_string[i]));
+ ACPI_WARNING((AE_INFO, "Invalid package element"
+ " [%d] got string/buffer,"
+ " expecing [%c]",
+ i, format_string[i]));
return_ACPI_STATUS(AE_BAD_DATA);
break;
}
@@ -323,7 +324,7 @@ acpi_evaluate_string(acpi_handle handle,
*data = kmalloc(element->string.length + 1, GFP_KERNEL);
if (!data) {
- ACPI_DEBUG_PRINT((ACPI_DB_ERROR, "Memory allocation error\n"));
+ ACPI_ERROR((AE_INFO, "Memory allocation"));
return_VALUE(-ENOMEM);
}
memset(*data, 0, element->string.length + 1);
@@ -365,25 +366,22 @@ acpi_evaluate_reference(acpi_handle hand
package = (union acpi_object *)buffer.pointer;
if ((buffer.length == 0) || !package) {
- ACPI_DEBUG_PRINT((ACPI_DB_ERROR,
- "No return object (len %X ptr %p)\n",
- (unsigned)buffer.length, package));
+ ACPI_ERROR((AE_INFO, "No return object (len %X ptr %p)",
+ (unsigned)buffer.length, package));
status = AE_BAD_DATA;
acpi_util_eval_error(handle, pathname, status);
goto end;
}
if (package->type != ACPI_TYPE_PACKAGE) {
- ACPI_DEBUG_PRINT((ACPI_DB_ERROR,
- "Expecting a [Package], found type %X\n",
- package->type));
+ ACPI_ERROR((AE_INFO, "Expecting a [Package], found type %X",
+ package->type));
status = AE_BAD_DATA;
acpi_util_eval_error(handle, pathname, status);
goto end;
}
if (!package->package.count) {
- ACPI_DEBUG_PRINT((ACPI_DB_ERROR,
- "[Package] has zero elements (%p)\n",
- package));
+ ACPI_ERROR((AE_INFO, "[Package] has zero elements (%p)",
+ package));
status = AE_BAD_DATA;
acpi_util_eval_error(handle, pathname, status);
goto end;
@@ -402,9 +400,9 @@ acpi_evaluate_reference(acpi_handle hand
if (element->type != ACPI_TYPE_ANY) {
status = AE_BAD_DATA;
- ACPI_DEBUG_PRINT((ACPI_DB_ERROR,
- "Expecting a [Reference] package element, found type %X\n",
- element->type));
+ ACPI_ERROR((AE_INFO,
+ "Expecting a [Reference] package element, found type %X",
+ element->type));
acpi_util_eval_error(handle, pathname, status);
break;
}
Index: linux-2.6.15/drivers/acpi/video.c
===================================================================
--- linux-2.6.15.orig/drivers/acpi/video.c
+++ linux-2.6.15/drivers/acpi/video.c
@@ -324,7 +324,7 @@ acpi_video_device_lcd_query_levels(struc
return_VALUE(status);
obj = (union acpi_object *)buffer.pointer;
if (!obj && (obj->type != ACPI_TYPE_PACKAGE)) {
- ACPI_DEBUG_PRINT((ACPI_DB_ERROR, "Invalid _BCL data\n"));
+ ACPI_ERROR((AE_INFO, "Invalid _BCL data"));
status = -EFAULT;
goto err;
}
@@ -399,7 +399,7 @@ acpi_video_device_EDID(struct acpi_video
if (obj && obj->type == ACPI_TYPE_BUFFER)
*edid = obj;
else {
- ACPI_DEBUG_PRINT((ACPI_DB_ERROR, "Invalid _DDC data\n"));
+ ACPI_ERROR((AE_INFO, "Invalid _DDC data"));
status = -EFAULT;
kfree(obj);
}
@@ -560,8 +560,7 @@ static void acpi_video_device_find_cap(s
o = (union acpi_object *)&obj->package.
elements[i];
if (o->type != ACPI_TYPE_INTEGER) {
- ACPI_DEBUG_PRINT((ACPI_DB_ERROR,
- "Invalid data\n"));
+ ACPI_ERROR((AE_INFO, "Invalid data"));
continue;
}
br->levels[count] = (u32) o->integer.value;
@@ -904,8 +903,7 @@ static int acpi_video_device_add_fs(stru
/* 'info' [R] */
entry = create_proc_entry("info", S_IRUGO, acpi_device_dir(device));
if (!entry)
- ACPI_DEBUG_PRINT((ACPI_DB_ERROR,
- "Unable to create 'info' fs entry\n"));
+ return_VALUE(-ENODEV);
else {
entry->proc_fops = &acpi_video_device_info_fops;
entry->data = acpi_driver_data(device);
@@ -917,8 +915,7 @@ static int acpi_video_device_add_fs(stru
create_proc_entry("state", S_IFREG | S_IRUGO | S_IWUSR,
acpi_device_dir(device));
if (!entry)
- ACPI_DEBUG_PRINT((ACPI_DB_ERROR,
- "Unable to create 'state' fs entry\n"));
+ return_VALUE(-ENODEV);
else {
acpi_video_device_state_fops.write = acpi_video_device_write_state;
entry->proc_fops = &acpi_video_device_state_fops;
@@ -931,8 +928,7 @@ static int acpi_video_device_add_fs(stru
create_proc_entry("brightness", S_IFREG | S_IRUGO | S_IWUSR,
acpi_device_dir(device));
if (!entry)
- ACPI_DEBUG_PRINT((ACPI_DB_ERROR,
- "Unable to create 'brightness' fs entry\n"));
+ return_VALUE(-ENODEV);
else {
acpi_video_device_brightness_fops.write = acpi_video_device_write_brightness;
entry->proc_fops = &acpi_video_device_brightness_fops;
@@ -943,8 +939,7 @@ static int acpi_video_device_add_fs(stru
/* 'EDID' [R] */
entry = create_proc_entry("EDID", S_IRUGO, acpi_device_dir(device));
if (!entry)
- ACPI_DEBUG_PRINT((ACPI_DB_ERROR,
- "Unable to create 'brightness' fs entry\n"));
+ return_VALUE(-ENODEV);
else {
entry->proc_fops = &acpi_video_device_EDID_fops;
entry->data = acpi_driver_data(device);
@@ -1200,8 +1195,7 @@ static int acpi_video_bus_add_fs(struct
/* 'info' [R] */
entry = create_proc_entry("info", S_IRUGO, acpi_device_dir(device));
if (!entry)
- ACPI_DEBUG_PRINT((ACPI_DB_ERROR,
- "Unable to create 'info' fs entry\n"));
+ return_VALUE(-ENODEV);
else {
entry->proc_fops = &acpi_video_bus_info_fops;
entry->data = acpi_driver_data(device);
@@ -1211,8 +1205,7 @@ static int acpi_video_bus_add_fs(struct
/* 'ROM' [R] */
entry = create_proc_entry("ROM", S_IRUGO, acpi_device_dir(device));
if (!entry)
- ACPI_DEBUG_PRINT((ACPI_DB_ERROR,
- "Unable to create 'ROM' fs entry\n"));
+ return_VALUE(-ENODEV);
else {
entry->proc_fops = &acpi_video_bus_ROM_fops;
entry->data = acpi_driver_data(device);
@@ -1223,8 +1216,7 @@ static int acpi_video_bus_add_fs(struct
entry =
create_proc_entry("POST_info", S_IRUGO, acpi_device_dir(device));
if (!entry)
- ACPI_DEBUG_PRINT((ACPI_DB_ERROR,
- "Unable to create 'POST_info' fs entry\n"));
+ return_VALUE(-ENODEV);
else {
entry->proc_fops = &acpi_video_bus_POST_info_fops;
entry->data = acpi_driver_data(device);
@@ -1236,8 +1228,7 @@ static int acpi_video_bus_add_fs(struct
create_proc_entry("POST", S_IFREG | S_IRUGO | S_IRUSR,
acpi_device_dir(device));
if (!entry)
- ACPI_DEBUG_PRINT((ACPI_DB_ERROR,
- "Unable to create 'POST' fs entry\n"));
+ return_VALUE(-ENODEV);
else {
acpi_video_bus_POST_fops.write = acpi_video_bus_write_POST;
entry->proc_fops = &acpi_video_bus_POST_fops;
@@ -1250,8 +1241,7 @@ static int acpi_video_bus_add_fs(struct
create_proc_entry("DOS", S_IFREG | S_IRUGO | S_IRUSR,
acpi_device_dir(device));
if (!entry)
- ACPI_DEBUG_PRINT((ACPI_DB_ERROR,
- "Unable to create 'DOS' fs entry\n"));
+ return_VALUE(-ENODEV);
else {
acpi_video_bus_DOS_fops.write = acpi_video_bus_write_DOS;
entry->proc_fops = &acpi_video_bus_DOS_fops;
@@ -1344,8 +1334,6 @@ acpi_video_bus_get_one_device(struct acp
acpi_video_device_notify,
data);
if (ACPI_FAILURE(status)) {
- ACPI_DEBUG_PRINT((ACPI_DB_ERROR,
- "Error installing notify handler\n"));
result = -ENODEV;
goto end;
}
@@ -1444,13 +1432,13 @@ static int acpi_video_device_enumerate(s
status = acpi_evaluate_object(video->handle, "_DOD", NULL, &buffer);
if (!ACPI_SUCCESS(status)) {
- ACPI_DEBUG_PRINT((ACPI_DB_ERROR, "Error evaluating _DOD\n"));
+ ACPI_EXCEPTION((AE_INFO, status, "Evaluating _DOD"));
return_VALUE(status);
}
dod = (union acpi_object *)buffer.pointer;
if (!dod || (dod->type != ACPI_TYPE_PACKAGE)) {
- ACPI_DEBUG_PRINT((ACPI_DB_ERROR, "Invalid _DOD data\n"));
+ ACPI_EXCEPTION((AE_INFO, status, "Invalid _DOD data"));
status = -EFAULT;
goto out;
}
@@ -1474,8 +1462,7 @@ static int acpi_video_device_enumerate(s
obj = (union acpi_object *)&dod->package.elements[i];
if (obj->type != ACPI_TYPE_INTEGER) {
- ACPI_DEBUG_PRINT((ACPI_DB_ERROR,
- "Invalid _DOD data\n"));
+ ACPI_ERROR((AE_INFO, "Invalid _DOD data"));
active_device_list[i].value.int_val =
ACPI_VIDEO_HEAD_INVALID;
}
@@ -1589,8 +1576,7 @@ acpi_video_bus_get_devices(struct acpi_v
status = acpi_video_bus_get_one_device(dev, video);
if (ACPI_FAILURE(status)) {
- ACPI_DEBUG_PRINT((ACPI_DB_ERROR,
- "Cant attach device\n"));
+ ACPI_EXCEPTION((AE_INFO, status, "Cant attach device"));
continue;
}
@@ -1618,9 +1604,6 @@ static int acpi_video_bus_put_one_device
status = acpi_remove_notify_handler(device->handle,
ACPI_DEVICE_NOTIFY,
acpi_video_device_notify);
- if (ACPI_FAILURE(status))
- ACPI_DEBUG_PRINT((ACPI_DB_ERROR,
- "Error removing notify handler\n"));
return_VALUE(0);
}
@@ -1783,8 +1766,6 @@ static int acpi_video_bus_add(struct acp
ACPI_DEVICE_NOTIFY,
acpi_video_bus_notify, video);
if (ACPI_FAILURE(status)) {
- ACPI_DEBUG_PRINT((ACPI_DB_ERROR,
- "Error installing notify handler\n"));
result = -ENODEV;
goto end;
}
@@ -1821,9 +1802,6 @@ static int acpi_video_bus_remove(struct
status = acpi_remove_notify_handler(video->handle,
ACPI_DEVICE_NOTIFY,
acpi_video_bus_notify);
- if (ACPI_FAILURE(status))
- ACPI_DEBUG_PRINT((ACPI_DB_ERROR,
- "Error removing notify handler\n"));
acpi_video_bus_put_devices(video);
acpi_video_bus_remove_fs(device);
Index: linux-2.6.15/drivers/acpi/system.c
===================================================================
--- linux-2.6.15.orig/drivers/acpi/system.c
+++ linux-2.6.15/drivers/acpi/system.c
@@ -161,9 +161,6 @@ static int __init acpi_system_init(void)
return_VALUE(error);
Error:
- ACPI_DEBUG_PRINT((ACPI_DB_ERROR,
- "Unable to create '%s' proc fs entry\n", name));
-
remove_proc_entry(ACPI_SYSTEM_FILE_FADT, acpi_root_dir);
remove_proc_entry(ACPI_SYSTEM_FILE_DSDT, acpi_root_dir);
remove_proc_entry(ACPI_SYSTEM_FILE_INFO, acpi_root_dir);
[-- Attachment #3: acpi_export_syms --]
[-- Type: text/plain, Size: 1355 bytes --]
Subject: Export symbols for ACPI_ERROR/EXCEPTION/WARNING macros
signed-off-by: Thomas Renninger <trenn@suse.de>
utmisc.c | 6 +++++-
1 files changed, 5 insertions(+), 1 deletion(-)
Index: linux-2.6.15/drivers/acpi/utilities/utmisc.c
===================================================================
--- linux-2.6.15.orig/drivers/acpi/utilities/utmisc.c
+++ linux-2.6.15/drivers/acpi/utilities/utmisc.c
@@ -41,6 +41,8 @@
* POSSIBILITY OF SUCH DAMAGES.
*/
+#include <linux/module.h>
+
#include <acpi/acpi.h>
#include <acpi/acnamesp.h>
@@ -862,6 +864,7 @@ acpi_ut_error(char *module_name, u32 lin
acpi_os_vprintf(format, args);
acpi_os_printf(" [%X]\n", ACPI_CA_VERSION);
}
+EXPORT_SYMBOL(acpi_ut_error);
void ACPI_INTERNAL_VAR_XFACE
acpi_ut_exception(char *module_name,
@@ -876,6 +879,7 @@ acpi_ut_exception(char *module_name,
acpi_os_vprintf(format, args);
acpi_os_printf(" [%X]\n", ACPI_CA_VERSION);
}
+EXPORT_SYMBOL(acpi_ut_exception);
void ACPI_INTERNAL_VAR_XFACE
acpi_ut_warning(char *module_name, u32 line_number, char *format, ...)
@@ -888,7 +892,7 @@ acpi_ut_warning(char *module_name, u32 l
acpi_os_vprintf(format, args);
acpi_os_printf(" [%X]\n", ACPI_CA_VERSION);
}
-
+EXPORT_SYMBOL(acpi_ut_warning);
void ACPI_INTERNAL_VAR_XFACE
acpi_ut_info(char *module_name, u32 line_number, char *format, ...)
{
[-- Attachment #4: acpi_handler_warning --]
[-- Type: text/plain, Size: 5404 bytes --]
Subject: Print error message if remove/install notify handler fails
Messages have been removed from the calling functions...
signed-off-by: Thomas Renninger <trenn@suse.de>
evxface.c | 47 ++++++++++++++++++++++++++++-------------------
1 files changed, 28 insertions(+), 19 deletions(-)
Index: linux-2.6.15/drivers/acpi/events/evxface.c
===================================================================
--- linux-2.6.15.orig/drivers/acpi/events/evxface.c
+++ linux-2.6.15/drivers/acpi/events/evxface.c
@@ -415,12 +415,13 @@ acpi_remove_notify_handler(acpi_handle d
if ((!device) ||
(!handler) || (handler_type > ACPI_MAX_NOTIFY_HANDLER_TYPE)) {
- return_ACPI_STATUS(AE_BAD_PARAMETER);
+ status = AE_BAD_PARAMETER;
+ goto exit;
}
status = acpi_ut_acquire_mutex(ACPI_MTX_NAMESPACE);
if (ACPI_FAILURE(status)) {
- return_ACPI_STATUS(status);
+ goto exit;
}
/* Convert and validate the device handle */
@@ -428,7 +429,7 @@ acpi_remove_notify_handler(acpi_handle d
node = acpi_ns_map_handle_to_node(device);
if (!node) {
status = AE_BAD_PARAMETER;
- goto unlock_and_exit;
+ goto unlock;
}
/* Root Object */
@@ -442,7 +443,7 @@ acpi_remove_notify_handler(acpi_handle d
((handler_type & ACPI_DEVICE_NOTIFY) &&
!acpi_gbl_device_notify.handler)) {
status = AE_NOT_EXIST;
- goto unlock_and_exit;
+ goto unlock;
}
/* Make sure all deferred tasks are completed */
@@ -451,7 +452,7 @@ acpi_remove_notify_handler(acpi_handle d
acpi_os_wait_events_complete(NULL);
status = acpi_ut_acquire_mutex(ACPI_MTX_NAMESPACE);
if (ACPI_FAILURE(status)) {
- return_ACPI_STATUS(status);
+ goto exit;
}
if (handler_type & ACPI_SYSTEM_NOTIFY) {
@@ -474,7 +475,7 @@ acpi_remove_notify_handler(acpi_handle d
if (!acpi_ev_is_notify_object(node)) {
status = AE_TYPE;
- goto unlock_and_exit;
+ goto unlock;
}
/* Check for an existing internal object */
@@ -482,7 +483,7 @@ acpi_remove_notify_handler(acpi_handle d
obj_desc = acpi_ns_get_attached_object(node);
if (!obj_desc) {
status = AE_NOT_EXIST;
- goto unlock_and_exit;
+ goto unlock;
}
/* Object exists - make sure there's an existing handler */
@@ -492,7 +493,7 @@ acpi_remove_notify_handler(acpi_handle d
if ((!notify_obj) ||
(notify_obj->notify.handler != handler)) {
status = AE_BAD_PARAMETER;
- goto unlock_and_exit;
+ goto unlock;
}
/* Make sure all deferred tasks are completed */
@@ -500,7 +501,7 @@ acpi_remove_notify_handler(acpi_handle d
acpi_os_wait_events_complete(NULL);
status = acpi_ut_acquire_mutex(ACPI_MTX_NAMESPACE);
if (ACPI_FAILURE(status)) {
- return_ACPI_STATUS(status);
+ goto exit;
}
/* Remove the handler */
@@ -513,7 +514,7 @@ acpi_remove_notify_handler(acpi_handle d
if ((!notify_obj) ||
(notify_obj->notify.handler != handler)) {
status = AE_BAD_PARAMETER;
- goto unlock_and_exit;
+ goto unlock;
}
/* Make sure all deferred tasks are completed */
@@ -521,7 +522,7 @@ acpi_remove_notify_handler(acpi_handle d
acpi_os_wait_events_complete(NULL);
status = acpi_ut_acquire_mutex(ACPI_MTX_NAMESPACE);
if (ACPI_FAILURE(status)) {
- return_ACPI_STATUS(status);
+ goto exit;
}
/* Remove the handler */
@@ -530,8 +531,11 @@ acpi_remove_notify_handler(acpi_handle d
}
}
- unlock_and_exit:
+unlock:
(void)acpi_ut_release_mutex(ACPI_MTX_NAMESPACE);
+exit:
+ if (ACPI_FAILURE(status))
+ ACPI_EXCEPTION((AE_INFO, status, "Removing notify handler"));
return_ACPI_STATUS(status);
}
@@ -570,12 +574,13 @@ acpi_install_gpe_handler(acpi_handle gpe
/* Parameter validation */
if ((!address) || (type > ACPI_GPE_XRUPT_TYPE_MASK)) {
- return_ACPI_STATUS(AE_BAD_PARAMETER);
+ status = AE_BAD_PARAMETER;
+ goto exit;
}
status = acpi_ut_acquire_mutex(ACPI_MTX_EVENTS);
if (ACPI_FAILURE(status)) {
- return_ACPI_STATUS(status);
+ goto exit;
}
/* Ensure that we have a valid GPE number */
@@ -583,7 +588,7 @@ acpi_install_gpe_handler(acpi_handle gpe
gpe_event_info = acpi_ev_get_gpe_event_info(gpe_device, gpe_number);
if (!gpe_event_info) {
status = AE_BAD_PARAMETER;
- goto unlock_and_exit;
+ goto unlock;
}
/* Make sure that there isn't a handler there already */
@@ -591,7 +596,7 @@ acpi_install_gpe_handler(acpi_handle gpe
if ((gpe_event_info->flags & ACPI_GPE_DISPATCH_MASK) ==
ACPI_GPE_DISPATCH_HANDLER) {
status = AE_ALREADY_EXISTS;
- goto unlock_and_exit;
+ goto unlock;
}
/* Allocate and init handler object */
@@ -599,7 +604,7 @@ acpi_install_gpe_handler(acpi_handle gpe
handler = ACPI_MEM_CALLOCATE(sizeof(struct acpi_handler_info));
if (!handler) {
status = AE_NO_MEMORY;
- goto unlock_and_exit;
+ goto unlock;
}
handler->address = address;
@@ -610,7 +615,7 @@ acpi_install_gpe_handler(acpi_handle gpe
status = acpi_ev_disable_gpe(gpe_event_info);
if (ACPI_FAILURE(status)) {
- goto unlock_and_exit;
+ goto unlock;
}
/* Install the handler */
@@ -625,8 +630,12 @@ acpi_install_gpe_handler(acpi_handle gpe
acpi_os_release_lock(acpi_gbl_gpe_lock, flags);
- unlock_and_exit:
+unlock:
(void)acpi_ut_release_mutex(ACPI_MTX_EVENTS);
+exit:
+ if (ACPI_FAILURE(status))
+ ACPI_EXCEPTION((AE_INFO, status,
+ "Installing notify handler failed"));
return_ACPI_STATUS(status);
}
^ permalink raw reply [flat|nested] 8+ messages in thread
* RE: Convert PRINT_DEBUG(DB_ERROR/WARNING,...) to ACPI_ERROR/WARNING
@ 2006-02-06 22:50 Moore, Robert
2006-02-06 23:00 ` Thomas Renninger
0 siblings, 1 reply; 8+ messages in thread
From: Moore, Robert @ 2006-02-06 22:50 UTC (permalink / raw)
To: Thomas Renninger; +Cc: ACPI-ML, Brown, Len
> Also added the EXPORT_SYMBOLS(ut_warning/error/exception) function
decl.
> in
> (in a separated patch -> ACPICA, acpi/utilities/utmisc.c).
Don't these belong somewhere else?
> Also added errors inside remove/install handler funcs (in a separated
> patch -> ACPICA,
> acpi/events/evxface.c).
So, you are saying that there are insufficient error messages in
evxface.c, I'll look at it.
> -----Original Message-----
> From: Thomas Renninger [mailto:trenn@suse.de]
> Sent: Monday, February 06, 2006 12:57 PM
> To: Moore, Robert
> Cc: ACPI-ML; Brown, Len
> Subject: Re: Convert PRINT_DEBUG(DB_ERROR/WARNING,...) to
> ACPI_ERROR/WARNING
>
> Moore, Robert wrote:
> > BTW,
> >
> > The implementations of ACPI_ERROR/WARNING/INFO automatically insert
a
> > newline at the end of the message, along with the ACPI version.
> >
> > + ACPI_ERROR((AE_INFO, "Error reading AC Adapter
> > state\n"));
> >
> > So, you will probably want to remove the \n at the end of each of
these.
> >
> > With hundreds of such messages, this actually saves an "interesting"
> > amount of memory.
> >
> > Also, I created the ACPI_EXCEPTION interface that will decode and
> > display the ACPI_STATUS code; you may want to use this instead of
> > ACPI_ERROR is some cases.
> >
> Ok, I now made use of the ACPI_EXCEPTION, whenever possible.
>
> Also shortend some "Error:", "ACPI bug:" messages.
>
> Also added the EXPORT_SYMBOLS(ut_warning/error/exception) function
decl.
> in
> (in a separated patch -> ACPICA, acpi/utilities/utmisc.c).
>
> Also added errors inside remove/install handler funcs (in a separated
> patch -> ACPICA,
> acpi/events/evxface.c).
>
> Thomas
^ permalink raw reply [flat|nested] 8+ messages in thread
* Re: Convert PRINT_DEBUG(DB_ERROR/WARNING,...) to ACPI_ERROR/WARNING
2006-02-06 22:50 Moore, Robert
@ 2006-02-06 23:00 ` Thomas Renninger
0 siblings, 0 replies; 8+ messages in thread
From: Thomas Renninger @ 2006-02-06 23:00 UTC (permalink / raw)
To: Moore, Robert; +Cc: ACPI-ML, Brown, Len
Moore, Robert wrote:
>> Also added the EXPORT_SYMBOLS(ut_warning/error/exception) function
> decl.
>> in
>> (in a separated patch -> ACPICA, acpi/utilities/utmisc.c).
>
> Don't these belong somewhere else?
I thought everything in subdirs is ACPICA...
>
>> Also added errors inside remove/install handler funcs (in a separated
>> patch -> ACPICA,
>> acpi/events/evxface.c).
>
> So, you are saying that there are insufficient error messages in
> evxface.c, I'll look at it.
>
Grep in the big one for acpi_remove_notify_handler or
"Error installing notify handler" ...
^ permalink raw reply [flat|nested] 8+ messages in thread
* RE: Convert PRINT_DEBUG(DB_ERROR/WARNING,...) to ACPI_ERROR/WARNING
@ 2006-02-06 23:06 Moore, Robert
2006-02-07 2:00 ` Randy.Dunlap
0 siblings, 1 reply; 8+ messages in thread
From: Moore, Robert @ 2006-02-06 23:06 UTC (permalink / raw)
To: Thomas Renninger; +Cc: ACPI-ML, Brown, Len
I meant, EXPORT_SYMBOLS is Linux-specific and belongs in a
linux-specific header (wherever the rest of the ACPICA public symbols
are exported)
> -----Original Message-----
> From: Thomas Renninger [mailto:trenn@suse.de]
> Sent: Monday, February 06, 2006 3:01 PM
> To: Moore, Robert
> Cc: ACPI-ML; Brown, Len
> Subject: Re: Convert PRINT_DEBUG(DB_ERROR/WARNING,...) to
> ACPI_ERROR/WARNING
>
> Moore, Robert wrote:
> >> Also added the EXPORT_SYMBOLS(ut_warning/error/exception) function
> > decl.
> >> in
> >> (in a separated patch -> ACPICA, acpi/utilities/utmisc.c).
> >
> > Don't these belong somewhere else?
> I thought everything in subdirs is ACPICA...
>
> >
> >> Also added errors inside remove/install handler funcs (in a
separated
> >> patch -> ACPICA,
> >> acpi/events/evxface.c).
> >
> > So, you are saying that there are insufficient error messages in
> > evxface.c, I'll look at it.
> >
>
> Grep in the big one for acpi_remove_notify_handler or
> "Error installing notify handler" ...
^ permalink raw reply [flat|nested] 8+ messages in thread
* Re: Convert PRINT_DEBUG(DB_ERROR/WARNING,...) to ACPI_ERROR/WARNING
2006-02-06 23:06 Moore, Robert
@ 2006-02-07 2:00 ` Randy.Dunlap
0 siblings, 0 replies; 8+ messages in thread
From: Randy.Dunlap @ 2006-02-07 2:00 UTC (permalink / raw)
To: Moore, Robert; +Cc: trenn, linux-acpi, len.brown
On Mon, 6 Feb 2006 15:06:24 -0800 Moore, Robert wrote:
> I meant, EXPORT_SYMBOLS is Linux-specific and belongs in a
> linux-specific header (wherever the rest of the ACPICA public symbols
> are exported)
a. All of these files in drivers/acpi/ use EXPORT_SYMBOL:
./bus.c
./ec.c
./events/evxface.c
./events/evxfevnt.c
./events/evxfregn.c
./glue.c
./hardware/hwregs.c
./hardware/hwsleep.c
./hardware/hwtimer.c
./namespace/nsxfeval.c
./namespace/nsxfname.c
./namespace/nsxfobj.c
./numa.c
./osl.c
./pci_bind.c
./pci_irq.c
./pci_root.c
./processor_core.c
./processor_perflib.c
./resources/rsxface.c
./scan.c
./tables/tbconvrt.c
./tables/tbxface.c
./tables/tbxfroot.c
./utilities/utdebug.c
./utilities/utglobal.c
./utilities/utxface.c
./utils.c
b. Linux convention is to put EXPORT_SYMBOL[_GPL]() close to the
symbol that is being exported.
c. Thomas, please use "diffstat -p1" so that we get directory names
in the diffstat.
> > -----Original Message-----
> > From: Thomas Renninger [mailto:trenn@suse.de]
> > Sent: Monday, February 06, 2006 3:01 PM
> > To: Moore, Robert
> > Cc: ACPI-ML; Brown, Len
> > Subject: Re: Convert PRINT_DEBUG(DB_ERROR/WARNING,...) to
> > ACPI_ERROR/WARNING
> >
> > Moore, Robert wrote:
> > >> Also added the EXPORT_SYMBOLS(ut_warning/error/exception) function
> > > decl.
> > >> in
> > >> (in a separated patch -> ACPICA, acpi/utilities/utmisc.c).
> > >
> > > Don't these belong somewhere else?
> > I thought everything in subdirs is ACPICA...
> >
> > >
> > >> Also added errors inside remove/install handler funcs (in a
> separated
> > >> patch -> ACPICA,
> > >> acpi/events/evxface.c).
> > >
> > > So, you are saying that there are insufficient error messages in
> > > evxface.c, I'll look at it.
> > >
> >
> > Grep in the big one for acpi_remove_notify_handler or
> > "Error installing notify handler" ...
> -
> To unsubscribe from this list: send the line "unsubscribe linux-acpi" in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at http://vger.kernel.org/majordomo-info.html
>
---
~Randy
^ permalink raw reply [flat|nested] 8+ messages in thread
* RE: Convert PRINT_DEBUG(DB_ERROR/WARNING,...) to ACPI_ERROR/WARNING
@ 2006-02-09 9:26 Brown, Len
0 siblings, 0 replies; 8+ messages in thread
From: Brown, Len @ 2006-02-09 9:26 UTC (permalink / raw)
To: Thomas Renninger, Moore, Robert; +Cc: ACPI-ML
applied to acpi-test
thanks,
-Len
^ permalink raw reply [flat|nested] 8+ messages in thread
end of thread, other threads:[~2006-02-09 9:26 UTC | newest]
Thread overview: 8+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2006-02-03 21:19 Convert PRINT_DEBUG(DB_ERROR/WARNING,...) to ACPI_ERROR/WARNING Thomas Renninger
-- strict thread matches above, loose matches on Subject: below --
2006-02-03 21:41 Moore, Robert
2006-02-06 20:57 ` Thomas Renninger
2006-02-06 22:50 Moore, Robert
2006-02-06 23:00 ` Thomas Renninger
2006-02-06 23:06 Moore, Robert
2006-02-07 2:00 ` Randy.Dunlap
2006-02-09 9:26 Brown, Len
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox