From mboxrd@z Thu Jan 1 00:00:00 1970 From: Edgar Hucek Subject: ACPI Troubles with 2.6.16-rc3 Date: Fri, 17 Feb 2006 08:54:02 +0100 Message-ID: <43F5811A.60904@ed-soft.at> Mime-Version: 1.0 Content-Type: multipart/mixed; boundary="------------030908050302020707000304" Return-path: Received: from 83-64-96-243.bad-voeslau.xdsl-line.inode.at ([83.64.96.243]:43970 "EHLO mognix.dark-green.com") by vger.kernel.org with ESMTP id S1161165AbWBQHyE (ORCPT ); Fri, 17 Feb 2006 02:54:04 -0500 Received: from [192.168.10.125] (chello084114192194.1.15.vie.surfer.at [84.114.192.194]) by mognix.dark-green.com (Postfix) with ESMTP id A95E7429EA6 for ; Fri, 17 Feb 2006 08:54:03 +0100 (CET) Sender: linux-acpi-owner@vger.kernel.org List-Id: linux-acpi@vger.kernel.org To: linux-acpi@vger.kernel.org This is a multi-part message in MIME format. --------------030908050302020707000304 Content-Type: text/plain; charset=ISO-8859-1 Content-Transfer-Encoding: 7bit Hi. I didn't notice that acpi have it's own mailing list. I sended the following mail to the linux-kernel ml : I have ACPI troubles : CPU: After all inits, caps: bfe9fbff 00100000 00000000 00000140 0000c1a9 00000000 00000000 Checking 'hlt' instruction... OK. iounmap: bad address dfefd000 [] acpi_tb_get_table_header+0x67/0x92 [] unknown_bootoption+0x0/0x260 [] acpi_tb_get_table+0x13/0x55 [] acpi_tb_get_table_rsdt+0x1f/0x99 [] acpi_ns_root_initialize+0x28a/0x299 [] acpi_load_tables+0x45/0xa9 [] acpi_early_init+0x46/0xf6 [] start_kernel+0x2fd/0x3c0 [] unknown_bootoption+0x0/0x260 iounmap: bad address dfefd000 [] acpi_tb_delete_single_table+0x30/0x33 [] acpi_tb_convert_to_xsdt+0x8d/0xa3 [] unknown_bootoption+0x0/0x260 [] acpi_tb_get_table_rsdt+0x6d/0x99 [] acpi_ns_root_initialize+0x28a/0x299 [] acpi_load_tables+0x45/0xa9 [] acpi_early_init+0x46/0xf6 [] start_kernel+0x2fd/0x3c0 [] unknown_bootoption+0x0/0x260 iounmap: bad address dfefb000 [] acpi_tb_get_table_header+0x67/0x92 [] acpi_tb_get_required_tables+0x4b/0x1f1 [] unknown_bootoption+0x0/0x260 [] acpi_tb_init_table_descriptor+0x3a/0x107 [] acpi_tb_get_table_rsdt+0x7e/0x99 [] unknown_bootoption+0x0/0x260 [] acpi_load_tables+0x5a/0xa9 [] acpi_early_init+0x46/0xf6 [] start_kernel+0x2fd/0x3c0 Ataches is the full dmesg output. The machine is an Apple Intel iMac 17" Dual Core booted with elilo. I also filed a bug : http://bugzilla.kernel.org/show_bug.cgi?id=6088 Any ideas ? thx Edgar Hucek --------------030908050302020707000304 Content-Type: text/plain; name="imac_dmesg.txt" Content-Transfer-Encoding: 7bit Content-Disposition: inline; filename="imac_dmesg.txt" Linux version 2.6.16-rc3 (root@t43) (gcc version 4.0.2 (Gentoo 4.0.2-r3, pie-8.7.8)) #135 SMP Thu Feb 16 14:03:20 CET 2006 EFI: EFI v0.00 by Apple ACPI=0x1fefd000 <6> ACPI 2.0=0x1fefd014 <6> SMBIOS=0x1fec9000 510MB LOWMEM available. On node 0 totalpages: 130800 DMA zone: 4096 pages, LIFO batch:0 DMA32 zone: 0 pages, LIFO batch:0 Normal zone: 126704 pages, LIFO batch:31 HighMem zone: 0 pages, LIFO batch:0 DMI not present or invalid. ACPI: RSDP (v002 APPLE ) @ 0x1fefd014 ACPI: XSDT (v001 APPLE Apple00 0x00000039 0x01000013) @ 0x1fefd120 ACPI: FADT (v003 APPLE Apple00 0x00000039 Loki 0x0000005f) @ 0x1fefb000 ACPI: HPET (v001 APPLE Apple00 0x00000001 Loki 0x0000005f) @ 0x1fefa000 ACPI: MADT (v001 APPLE Apple00 0x00000001 Loki 0x0000005f) @ 0x1fef9000 ACPI: MCFG (v001 APPLE Apple00 0x00000001 Loki 0x0000005f) @ 0x1fef8000 ACPI: ASF! (v032 APPLE Apple00 0x00000001 Loki 0x0000005f) @ 0x1fef7000 ACPI: SBST (v001 APPLE Apple00 0x00000001 Loki 0x0000005f) @ 0x1fef6000 ACPI: ECDT (v001 APPLE Apple00 0x00000001 Loki 0x0000005f) @ 0x1fef5000 ACPI: SSDT (v001 APPLE SataPri 0x00001000 INTL 0x20050309) @ 0x1fec6000 ACPI: SSDT (v001 APPLE SataSec 0x00001000 INTL 0x20050309) @ 0x1fec5000 ACPI: SSDT (v001 APPLE CpuPm 0x00003000 INTL 0x20050309) @ 0x1fef0000 ACPI: DSDT (v001 APPLE iMac 0x00040001 INTL 0x20050309) @ 0x00000000 ACPI: PM-Timer IO Port: 0x408 ACPI: Local APIC address 0xfee00000 ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) Processor #0 6:14 APIC version 20 ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled) Processor #1 6:14 APIC version 20 ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0]) IOAPIC[0]: apic_id 1 already used, trying 2 IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23 ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) ACPI: IRQ0 used by override. ACPI: IRQ2 used by override. ACPI: IRQ9 used by override. Enabling APIC mode: Flat. Using 1 I/O APICs ACPI: HPET id: 0x8086a201 base: 0xfed00000 Using ACPI (MADT) for SMP configuration information Allocating PCI resources starting at 10100000 (gap: 10000000:00400000) Built 1 zonelists Kernel command line: BOOT_IMAGE=dev000:/vmlinuz video=vesafb:1440x900-32@70 init=/linuxrc root=/dev/ram0 acpi=force pci=routeirq irqpoll Misrouted IRQ fixup and polling support enabled This may significantly impact system performance mapped APIC to ffffd000 (fee00000) mapped IOAPIC to ffffc000 (fec00000) Enabling fast FPU save and restore... done. Enabling unmasked SIMD FPU exception support... done. Initializing CPU#0 PID hash table entries: 2048 (order: 11, 32768 bytes) Console: colour dummy device 80x25 Dentry cache hash table entries: 65536 (order: 6, 262144 bytes) Inode-cache hash table entries: 32768 (order: 5, 131072 bytes) Memory: 509572k/523200k available (2495k kernel code, 10328k reserved, 734k data, 248k init, 0k highmem) Checking if this processor honours the WP bit even in supervisor mode... Ok. Oops: efitime: can't read time status: 0x80000007 Using HPET for base-timer Using HPET for gettimeofday Detected 1833.314 MHz processor. Using hpet for high-res timesource Calibrating delay using timer specific routine.. 3677.67 BogoMIPS (lpj=7355347) Mount-cache hash table entries: 512 CPU: After generic identify, caps: bfe9fbff 00100000 00000000 00000000 0000c1a9 00000000 00000000 CPU: After vendor identify, caps: bfe9fbff 00100000 00000000 00000000 0000c1a9 00000000 00000000 monitor/mwait feature present. using mwait in idle threads. CPU: L1 I cache: 32K, L1 D cache: 32K CPU: L2 cache: 2048K CPU: Physical Processor ID: 0 CPU: Processor Core ID: 0 CPU: After all inits, caps: bfe9fbff 00100000 00000000 00000140 0000c1a9 00000000 00000000 Checking 'hlt' instruction... OK. iounmap: bad address dfefd000 [] acpi_tb_get_table_header+0x67/0x92 [] unknown_bootoption+0x0/0x260 [] acpi_tb_get_table+0x13/0x55 [] acpi_tb_get_table_rsdt+0x1f/0x99 [] acpi_ns_root_initialize+0x28a/0x299 [] acpi_load_tables+0x45/0xa9 [] acpi_early_init+0x46/0xf6 [] start_kernel+0x2fd/0x3c0 [] unknown_bootoption+0x0/0x260 iounmap: bad address dfefd000 [] acpi_tb_delete_single_table+0x30/0x33 [] acpi_tb_convert_to_xsdt+0x8d/0xa3 [] unknown_bootoption+0x0/0x260 [] acpi_tb_get_table_rsdt+0x6d/0x99 [] acpi_ns_root_initialize+0x28a/0x299 [] acpi_load_tables+0x45/0xa9 [] acpi_early_init+0x46/0xf6 [] start_kernel+0x2fd/0x3c0 [] unknown_bootoption+0x0/0x260 iounmap: bad address dfefb000 [] acpi_tb_get_table_header+0x67/0x92 [] acpi_tb_get_required_tables+0x4b/0x1f1 [] unknown_bootoption+0x0/0x260 [] acpi_tb_init_table_descriptor+0x3a/0x107 [] acpi_tb_get_table_rsdt+0x7e/0x99 [] unknown_bootoption+0x0/0x260 [] acpi_load_tables+0x5a/0xa9 [] acpi_early_init+0x46/0xf6 [] start_kernel+0x2fd/0x3c0 [] unknown_bootoption+0x0/0x260 iounmap: bad address dfefa000 [] acpi_tb_get_table_header+0x67/0x92 [] acpi_tb_get_required_tables+0x4b/0x1f1 [] unknown_bootoption+0x0/0x260 [] acpi_load_tables+0x5a/0xa9 [] acpi_early_init+0x46/0xf6 [] start_kernel+0x2fd/0x3c0 [] unknown_bootoption+0x0/0x260 iounmap: bad address dfef9000 [] acpi_tb_get_table_header+0x67/0x92 [] acpi_tb_get_required_tables+0x4b/0x1f1 [] unknown_bootoption+0x0/0x260 [] acpi_load_tables+0x5a/0xa9 [] acpi_early_init+0x46/0xf6 [] start_kernel+0x2fd/0x3c0 [] unknown_bootoption+0x0/0x260 iounmap: bad address dfef8000 [] acpi_tb_get_table_header+0x67/0x92 [] acpi_tb_get_required_tables+0x4b/0x1f1 [] unknown_bootoption+0x0/0x260 [] acpi_load_tables+0x5a/0xa9 [] acpi_early_init+0x46/0xf6 [] start_kernel+0x2fd/0x3c0 [] unknown_bootoption+0x0/0x260 iounmap: bad address dfef7000 [] acpi_tb_get_table_header+0x67/0x92 [] acpi_tb_get_required_tables+0x4b/0x1f1 [] unknown_bootoption+0x0/0x260 [] acpi_load_tables+0x5a/0xa9 [] acpi_early_init+0x46/0xf6 [] start_kernel+0x2fd/0x3c0 [] unknown_bootoption+0x0/0x260 iounmap: bad address dfef6000 [] acpi_tb_get_table_header+0x67/0x92 [] acpi_tb_get_required_tables+0x4b/0x1f1 [] unknown_bootoption+0x0/0x260 [] acpi_load_tables+0x5a/0xa9 [] acpi_early_init+0x46/0xf6 [] start_kernel+0x2fd/0x3c0 [] unknown_bootoption+0x0/0x260 iounmap: bad address dfef5000 [] acpi_tb_get_table_header+0x67/0x92 [] acpi_tb_get_required_tables+0x4b/0x1f1 [] unknown_bootoption+0x0/0x260 [] acpi_load_tables+0x5a/0xa9 [] acpi_early_init+0x46/0xf6 [] start_kernel+0x2fd/0x3c0 [] unknown_bootoption+0x0/0x260 iounmap: bad address dfefb000 [] acpi_tb_delete_single_table+0x30/0x33 [] acpi_tb_convert_table_fadt+0x2df/0x2fc [] acpi_tb_get_required_tables+0x111/0x1f1 [] unknown_bootoption+0x0/0x260 [] acpi_load_tables+0x5a/0xa9 [] acpi_early_init+0x46/0xf6 [] start_kernel+0x2fd/0x3c0 [] unknown_bootoption+0x0/0x260 iounmap: bad address dfef1000 [] acpi_tb_get_table_header+0x67/0x92 [] acpi_tb_get_secondary_table+0x1b/0x9b [] acpi_tb_get_required_tables+0x1b8/0x1f1 [] unknown_bootoption+0x0/0x260 [] acpi_load_tables+0x5a/0xa9 [] acpi_early_init+0x46/0xf6 [] start_kernel+0x2fd/0x3c0 [] unknown_bootoption+0x0/0x260 iounmap: bad address dfefd000 [] acpi_tb_delete_single_table+0x30/0x33 [] acpi_tb_uninstall_table+0x36/0x46 [] acpi_tb_delete_tables_by_type+0x71/0x88 [] acpi_tb_get_required_tables+0x1e3/0x1f1 [] unknown_bootoption+0x0/0x260 [] acpi_load_tables+0x5a/0xa9 [] acpi_early_init+0x46/0xf6 [] start_kernel+0x2fd/0x3c0 [] unknown_bootoption+0x0/0x260 CPU0: Intel Genuine Intel(R) CPU 1400 @ 1.83GHz stepping 08 Booting processor 1/1 eip 2000 Initializing CPU#1 Calibrating delay using timer specific routine.. 3666.68 BogoMIPS (lpj=7333368) CPU: After generic identify, caps: bfe9fbff 00100000 00000000 00000000 0000c1a9 00000000 00000000 CPU: After vendor identify, caps: bfe9fbff 00100000 00000000 00000000 0000c1a9 00000000 00000000 monitor/mwait feature present. CPU: L1 I cache: 32K, L1 D cache: 32K CPU: L2 cache: 2048K CPU: Physical Processor ID: 0 CPU: Processor Core ID: 1 CPU: After all inits, caps: bfe9fbff 00100000 00000000 00000140 0000c1a9 00000000 00000000 CPU1: Intel Genuine Intel(R) CPU 1400 @ 1.83GHz stepping 08 Total of 2 processors activated (7344.35 BogoMIPS). ENABLING IO-APIC IRQs ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1 checking TSC synchronization across 2 CPUs: passed. Brought up 2 CPUs migration_cost=8000 checking if image is initramfs...it isn't (no cpio magic); looks like an initrd Freeing initrd memory: 1848k freed NET: Registered protocol family 16 ACPI: bus type pci registered PCI: Using configuration type 1 ACPI: Subsystem revision 20060127 iounmap: bad address dfefd000 [] acpi_tb_get_table_header+0x67/0x92 [] acpi_tb_get_table+0x13/0x55 [] acpi_get_firmware_table+0xd7/0x282 [] acpi_hw_enable_runtime_gpe_block+0x28/0x3e [] acpi_ec_ecdt_probe+0xd2/0x31f [] acpi_init+0x58/0x1d7 [] fbmem_init+0x64/0xb0 [] init+0x136/0x3a0 [] init+0x0/0x3a0 [] kernel_thread_helper+0x5/0x10 iounmap: bad address dfefb000 [] acpi_tb_get_table_header+0x67/0x92 [] acpi_get_firmware_table+0x1bf/0x282 [] acpi_ec_ecdt_probe+0xd2/0x31f [] acpi_init+0x58/0x1d7 [] fbmem_init+0x64/0xb0 [] init+0x136/0x3a0 [] init+0x0/0x3a0 [] kernel_thread_helper+0x5/0x10 iounmap: bad address dfefa000 [] acpi_tb_get_table_header+0x67/0x92 [] acpi_get_firmware_table+0x1bf/0x282 [] acpi_ec_ecdt_probe+0xd2/0x31f [] acpi_init+0x58/0x1d7 [] fbmem_init+0x64/0xb0 [] init+0x136/0x3a0 [] init+0x0/0x3a0 [] kernel_thread_helper+0x5/0x10 iounmap: bad address dfef9000 [] acpi_tb_get_table_header+0x67/0x92 [] acpi_get_firmware_table+0x1bf/0x282 [] acpi_ec_ecdt_probe+0xd2/0x31f [] acpi_init+0x58/0x1d7 [] fbmem_init+0x64/0xb0 [] init+0x136/0x3a0 [] init+0x0/0x3a0 [] kernel_thread_helper+0x5/0x10 iounmap: bad address dfef8000 [] acpi_tb_get_table_header+0x67/0x92 [] acpi_get_firmware_table+0x1bf/0x282 [] acpi_ec_ecdt_probe+0xd2/0x31f [] acpi_init+0x58/0x1d7 [] fbmem_init+0x64/0xb0 [] init+0x136/0x3a0 [] init+0x0/0x3a0 [] kernel_thread_helper+0x5/0x10 iounmap: bad address dfef7000 [] acpi_tb_get_table_header+0x67/0x92 [] acpi_get_firmware_table+0x1bf/0x282 [] acpi_ec_ecdt_probe+0xd2/0x31f [] acpi_init+0x58/0x1d7 [] fbmem_init+0x64/0xb0 [] init+0x136/0x3a0 [] init+0x0/0x3a0 [] kernel_thread_helper+0x5/0x10 iounmap: bad address dfef6000 [] acpi_tb_get_table_header+0x67/0x92 [] acpi_get_firmware_table+0x1bf/0x282 [] acpi_ec_ecdt_probe+0xd2/0x31f [] acpi_init+0x58/0x1d7 [] fbmem_init+0x64/0xb0 [] init+0x136/0x3a0 [] init+0x0/0x3a0 [] kernel_thread_helper+0x5/0x10 iounmap: bad address dfef5000 [] acpi_tb_get_table_header+0x67/0x92 [] acpi_get_firmware_table+0x1bf/0x282 [] acpi_ec_ecdt_probe+0xd2/0x31f [] acpi_init+0x58/0x1d7 [] fbmem_init+0x64/0xb0 [] init+0x136/0x3a0 [] init+0x0/0x3a0 [] kernel_thread_helper+0x5/0x10 iounmap: bad address dfefd000 [] acpi_get_firmware_table+0x24e/0x282 [] acpi_ec_ecdt_probe+0xd2/0x31f [] acpi_init+0x58/0x1d7 [] fbmem_init+0x64/0xb0 [] init+0x136/0x3a0 [] init+0x0/0x3a0 [] kernel_thread_helper+0x5/0x10 ACPI: Found ECDT ACPI: Could not use ECDT ACPI: Interpreter enabled ACPI: Using IOAPIC for interrupt routing ACPI: PCI Root Bridge [PCI0] (0000:00) PCI: Probing PCI hardware (bus 00) PCI: Transparent bridge - 0000:00:1e.0 ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEGP._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP02._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIB._PRT] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 7 10 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 7 11 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 7 10 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 7 11 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 7 10 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 7 11 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 7 10 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 11 12 14 15) *0, disabled. ACPI: Embedded Controller [EC] (gpe 23) interrupt mode. SCSI subsystem initialized usbcore: registered new driver usbfs usbcore: registered new driver hub PCI: Using ACPI for IRQ routing PCI: Routing PCI interrupts for all devices because "pci=routeirq" specified ACPI: PCI Interrupt 0000:00:01.0[A] -> GSI 16 (level, low) -> IRQ 16 ACPI: PCI Interrupt 0000:00:07.0[A] -> GSI 16 (level, low) -> IRQ 16 ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 22 (level, low) -> IRQ 17 ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 17 (level, low) -> IRQ 18 ACPI: PCI Interrupt 0000:00:1c.1[B] -> GSI 16 (level, low) -> IRQ 16 ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 23 (level, low) -> IRQ 19 ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 19 (level, low) -> IRQ 20 ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 21 ACPI: PCI Interrupt 0000:00:1d.3[D] -> GSI 16 (level, low) -> IRQ 16 ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 23 (level, low) -> IRQ 19 ACPI: PCI Interrupt 0000:00:1f.1[A] -> GSI 18 (level, low) -> IRQ 21 ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 19 (level, low) -> IRQ 20 ACPI: PCI Interrupt 0000:00:1f.3[B] -> GSI 19 (level, low) -> IRQ 20 ACPI: PCI Interrupt 0000:01:00.0[A] -> GSI 16 (level, low) -> IRQ 16 ACPI: PCI Interrupt 0000:02:00.0[A] -> GSI 16 (level, low) -> IRQ 16 ACPI: PCI Interrupt 0000:03:00.0[A] -> GSI 17 (level, low) -> IRQ 18 ACPI: PCI Interrupt 0000:04:03.0[A] -> GSI 19 (level, low) -> IRQ 20 PCI: Bridge: 0000:00:01.0 IO window: 2000-2fff MEM window: 88300000-883fffff PREFETCH window: 80000000-87ffffff PCI: Bridge: 0000:00:1c.0 IO window: 1000-1fff MEM window: 88200000-882fffff PREFETCH window: 1ff00000-1fffffff PCI: Bridge: 0000:00:1c.1 IO window: disabled. MEM window: 88100000-881fffff PREFETCH window: disabled. PCI: Bridge: 0000:00:1e.0 IO window: disabled. MEM window: 88000000-880fffff PREFETCH window: disabled. ACPI: PCI Interrupt 0000:00:01.0[A] -> GSI 16 (level, low) -> IRQ 16 PCI: Setting latency timer of device 0000:00:01.0 to 64 ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 17 (level, low) -> IRQ 18 PCI: Setting latency timer of device 0000:00:1c.0 to 64 ACPI: PCI Interrupt 0000:00:1c.1[B] -> GSI 16 (level, low) -> IRQ 16 PCI: Setting latency timer of device 0000:00:1c.1 to 64 PCI: Setting latency timer of device 0000:00:1e.0 to 64 Initializing Cryptographic API io scheduler noop registered io scheduler anticipatory registered (default) io scheduler deadline registered io scheduler cfq registered ACPI: PCI Interrupt 0000:00:01.0[A] -> GSI 16 (level, low) -> IRQ 16 PCI: Setting latency timer of device 0000:00:01.0 to 64 assign_interrupt_mode Found MSI capability Allocate Port Service[0000:00:01.0:pcie00] ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 17 (level, low) -> IRQ 18 PCI: Setting latency timer of device 0000:00:1c.0 to 64 assign_interrupt_mode Found MSI capability Allocate Port Service[0000:00:1c.0:pcie00] Allocate Port Service[0000:00:1c.0:pcie02] ACPI: PCI Interrupt 0000:00:1c.1[B] -> GSI 16 (level, low) -> IRQ 16 PCI: Setting latency timer of device 0000:00:1c.1 to 64 assign_interrupt_mode Found MSI capability Allocate Port Service[0000:00:1c.1:pcie00] Allocate Port Service[0000:00:1c.1:pcie02] vesafb: framebuffer at 0x80000320, mapped to 0xe0900320, using 10350k, total 65536k vesafb: mode is 1472x900x32, linelength=5888, pages=1 vesafb: scrolling: redraw vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0 Console: switching to colour frame buffer device 184x112 fb0: VESA VGA frame buffer device ACPI: AC Adapter [ADP1] (on-line) ACPI: Power Button (FF) [PWRF] ACPI: Power Button (CM) [PWRB] ACPI Error (evgpe-0688): No handler or method for GPE[1D], disabling event<6>ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no) Using specific hotkey driver [20060127] ACPI: CPU0 (power states: C1[C1] C2[C2]) ACPI: Processor [CPU0] (supports 8 throttling states) ACPI: CPU1 (power states: C1[C1] C2[C2]) ACPI: Processor [CPU1] (supports 8 throttling states) Real Time Clock Driver v1.12ac i8042.c: No controller found. RAMDISK driver initialized: 16 RAM disks of 8192K size 1024 blocksize loop: loaded (max 8 devices) Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx ICH7: IDE controller at PCI slot 0000:00:1f.1 ACPI: PCI Interrupt 0000:00:1f.1[A] -> GSI 18 (level, low) -> IRQ 21 ICH7: chipset revision 2 ICH7: 100% native mode on irq 21 ide0: BM-DMA at 0x30c0-0x30c7, BIOS settings: hda:DMA, hdb:pio ide1: BM-DMA at 0x30c8-0x30cf, BIOS settings: hdc:pio, hdd:pio Probing IDE interface ide0... hda: MATSHITADVD-R UJ-846, ATAPI CD/DVD-ROM drive ide0 at 0x30e8-0x30ef,0x30fe on irq 21 Probing IDE interface ide1... Probing IDE interface ide1... hda: ATAPI 24X DVD-ROM DVD-R CD-R/RW drive, 2048kB Cache Uniform CD-ROM driver Revision: 3.20 hda: cdrom_pc_intr: The drive appears confused (ireason = 0x01) hda: cdrom_pc_intr: The drive appears confused (ireason = 0x01) hda: cdrom_pc_intr: The drive appears confused (ireason = 0x01) hda: cdrom_pc_intr: The drive appears confused (ireason = 0x01) hda: cdrom_pc_intr: The drive appears confused (ireason = 0x01) hda: cdrom_pc_intr: The drive appears confused (ireason = 0x01) hda: cdrom_pc_intr: The drive appears confused (ireason = 0x01) hda: cdrom_pc_intr: The drive appears confused (ireason = 0x01) hda: cdrom_pc_intr: The drive appears confused (ireason = 0x01) hda: cdrom_pc_intr: The drive appears confused (ireason = 0x01) hda: cdrom_pc_intr: The drive appears confused (ireason = 0x01) libata version 1.20 loaded. ahci 0000:00:1f.2: version 1.2 PCI: Enabling device 0000:00:1f.2 (0005 -> 0007) ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 19 (level, low) -> IRQ 20 irq 21: nobody cared (try booting with the "irqpoll" option) [] __report_bad_irq+0x24/0x90 [] acpi_irq+0xc/0x16 [] note_interrupt+0x93/0x250 [] acpi_irq+0x0/0x16 [] __do_IRQ+0xed/0x100 [] do_IRQ+0x19/0x30 [] common_interrupt+0x1a/0x20 [] acpi_processor_idle+0x15a/0x330 [] acpi_get_parent+0x4a/0x6d [] unknown_bootoption+0x0/0x260 [] cpu_idle+0x69/0x80 [] start_kernel+0x302/0x3c0 [] unknown_bootoption+0x0/0x260 handlers: [] (ide_intr+0x0/0x210) Disabling IRQ #21 PCI: Setting latency timer of device 0000:00:1f.2 to 64 ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 4 ports 1.5 Gbps 0x4 impl SATA mode ahci 0000:00:1f.2: flags: 64bit ncq ilck stag pm led clo pio slum part ata1: SATA max UDMA/133 cmd 0xE081A100 ctl 0x0 bmdma 0x0 irq 20 ata2: SATA max UDMA/133 cmd 0xE081A180 ctl 0x0 bmdma 0x0 irq 20 ata3: SATA max UDMA/133 cmd 0xE081A200 ctl 0x0 bmdma 0x0 irq 20 ata4: SATA max UDMA/133 cmd 0xE081A280 ctl 0x0 bmdma 0x0 irq 20 ata1: SATA link down (SStatus 0) scsi0 : ahci ata2: SATA link down (SStatus 0) scsi1 : ahci ata3: SATA link up 1.5 Gbps (SStatus 113) ata3: dev 0 cfg 49:2f00 82:346b 83:7d01 84:4003 85:3469 86:3c01 87:4003 88:007f ata3: dev 0 ATA-6, max UDMA/133, 312581808 sectors: LBA48 ata3: dev 0 configured for UDMA/133 scsi2 : ahci ata4: SATA link down (SStatus 0) scsi3 : ahci Vendor: ATA Model: ST3160023AS Rev: 3.42 Type: Direct-Access ANSI SCSI revision: 05 SCSI device sda: 312581808 512-byte hdwr sectors (160042 MB) sda: Write Protect is off sda: Mode Sense: 00 3a 00 00 SCSI device sda: drive cache: write back SCSI device sda: 312581808 512-byte hdwr sectors (160042 MB) sda: Write Protect is off sda: Mode Sense: 00 3a 00 00 SCSI device sda: drive cache: write back sda: sda1 sda2 sd 2:0:0:0: Attached scsi disk sda sd 2:0:0:0: Attached scsi generic sg0 type 0 SCSI Media Changer driver v0.25 usbmon: debugfs is not available PCI: Enabling device 0000:00:1d.7 (0000 -> 0002) ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 23 (level, low) -> IRQ 19 PCI: Setting latency timer of device 0000:00:1d.7 to 64 ehci_hcd 0000:00:1d.7: EHCI Host Controller ehci_hcd 0000:00:1d.7: debug port 1 PCI: cache line size of 32 is not supported by device 0000:00:1d.7 ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1 ehci_hcd 0000:00:1d.7: irq 19, io mem 0x88405400 ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 usb usb1: configuration #1 chosen from 1 choice hub 1-0:1.0: USB hub found hub 1-0:1.0: 8 ports detected ohci_hcd: 2005 April 22 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI) USB Universal Host Controller Interface driver v2.3 ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 23 (level, low) -> IRQ 19 PCI: Setting latency timer of device 0000:00:1d.0 to 64 uhci_hcd 0000:00:1d.0: UHCI Host Controller uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2 uhci_hcd 0000:00:1d.0: irq 19, io base 0x000030a0 usb usb2: configuration #1 chosen from 1 choice hub 2-0:1.0: USB hub found hub 2-0:1.0: 2 ports detected ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 19 (level, low) -> IRQ 20 PCI: Setting latency timer of device 0000:00:1d.1 to 64 uhci_hcd 0000:00:1d.1: UHCI Host Controller uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3 uhci_hcd 0000:00:1d.1: irq 20, io base 0x00003080 usb usb3: configuration #1 chosen from 1 choice hub 3-0:1.0: USB hub found hub 3-0:1.0: 2 ports detected ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 21 PCI: Setting latency timer of device 0000:00:1d.2 to 64 uhci_hcd 0000:00:1d.2: UHCI Host Controller uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4 uhci_hcd 0000:00:1d.2: irq 21, io base 0x00003060 usb usb4: configuration #1 chosen from 1 choice hub 4-0:1.0: USB hub found hub 4-0:1.0: 2 ports detected ACPI: PCI Interrupt 0000:00:1d.3[D] -> GSI 16 (level, low) -> IRQ 16 PCI: Setting latency timer of device 0000:00:1d.3 to 64 uhci_hcd 0000:00:1d.3: UHCI Host Controller uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5 uhci_hcd 0000:00:1d.3: irq 16, io base 0x00003040 usb 1-4: new high speed USB device using ehci_hcd and address 4 usb usb5: configuration #1 chosen from 1 choice hub 5-0:1.0: USB hub found hub 5-0:1.0: 2 ports detected usb 1-4: configuration #1 chosen from 1 choice Initializing USB Mass Storage driver... usb 1-5: new high speed USB device using ehci_hcd and address 5 usb 1-5: configuration #1 chosen from 1 choice usb 2-1: new full speed USB device using uhci_hcd and address 2 usb 2-1: configuration #1 chosen from 1 choice hub 2-1:1.0: USB hub found hub 2-1:1.0: 3 ports detected usb 3-1: new full speed USB device using uhci_hcd and address 2 usb 3-1: configuration #1 chosen from 1 choice usb 5-1: new full speed USB device using uhci_hcd and address 2 usb 5-1: configuration #1 chosen from 1 choice usb 5-2: new full speed USB device using uhci_hcd and address 3 usb 5-2: configuration #1 chosen from 1 choice scsi4 : SCSI emulation for USB Mass Storage devices usb-storage: device found at 5 usb-storage: waiting for device to settle before scanning usb 2-1.2: new low speed USB device using uhci_hcd and address 3 usb 2-1.2: configuration #1 chosen from 1 choice usb 2-1.3: new full speed USB device using uhci_hcd and address 4 usb 2-1.3: configuration #1 chosen from 1 choice usbcore: registered new driver usb-storage USB Mass Storage support registered. usbcore: registered new driver libusual input: USB HIDBP Keyboard 05ac:1000 as /class/input/input0 input: Mitsumi Electric Apple Extended USB Keyboard as /class/input/input1 usbcore: registered new driver usbkbd drivers/usb/input/usbkbd.c: :USB HID Boot Protocol keyboard driver input: USB HIDBP Mouse 05ac:1000 as /class/input/input2 input: Mitsumi Electric Apple Optical USB Mouse as /class/input/input3 usbcore: registered new driver usbmouse drivers/usb/input/usbmouse.c: v1.6:USB HID Boot Protocol mouse driver usbcore: registered new driver yealink drivers/usb/input/yealink.c: Yealink phone driver:yld-20051230 pegasus: v0.6.13 (2005/11/13), Pegasus/Pegasus II USB Ethernet driver pegasus 3-1:1.0: eth0, USB 10/100 Fast Ethernet, 00:e0:98:7e:02:d1 usbcore: registered new driver pegasus mice: PS/2 mouse device common for all mice NET: Registered protocol family 2 IP route cache hash table entries: 4096 (order: 2, 16384 bytes) TCP established hash table entries: 16384 (order: 5, 131072 bytes) TCP bind hash table entries: 16384 (order: 5, 131072 bytes) TCP: Hash tables configured (established 16384 bind 16384) TCP reno registered TCP bic registered NET: Registered protocol family 1 NET: Registered protocol family 17 Starting balanced_irq Using IPI Shortcut mode RAMDISK: Compressed image found at block 0 VFS: Mounted root (ext2 filesystem) readonly. Freeing unused kernel memory: 248k freed Vendor: Maxtor Model: 6Y160P0 Rev: YAR4 Type: Direct-Access ANSI SCSI revision: 02 SCSI device sdb: 320173056 512-byte hdwr sectors (163929 MB) sdb: Write Protect is off sdb: Mode Sense: 53 00 00 08 sdb: assuming drive cache: write through SCSI device sdb: 320173056 512-byte hdwr sectors (163929 MB) sdb: Write Protect is off sdb: Mode Sense: 53 00 00 08 sdb: assuming drive cache: write through sdb: sdb1 sdb2 sdb3 sd 4:0:0:0: Attached scsi disk sdb sd 4:0:0:0: Attached scsi generic sg1 type 0 usb-storage: device scan complete kjournald starting. Commit interval 5 seconds EXT3-fs: mounted filesystem with ordered data mode. Adding 1959920k swap on /dev/sdb2. Priority:-1 extents:1 across:1959920k EXT3-fs warning: checktime reached, running e2fsck is recommended EXT3 FS on sdb3, internal journal eth0: set allmulti eth0: set allmulti eth0: set allmulti eth0: set allmulti --------------030908050302020707000304--