From mboxrd@z Thu Jan 1 00:00:00 1970 From: Cyril Scetbon Subject: nx6125 battery issues Date: Wed, 14 Jun 2006 16:57:30 +0200 Message-ID: <449023DA.8050602@free.fr> Mime-Version: 1.0 Content-Type: multipart/mixed; boundary="------------010803080505090907040308" Return-path: Received: from smtp3-g19.free.fr ([212.27.42.29]:65217 "EHLO smtp3-g19.free.fr") by vger.kernel.org with ESMTP id S1751253AbWFNO7c (ORCPT ); Wed, 14 Jun 2006 10:59:32 -0400 Received: from [81.57.162.33] (cre94-1-81-57-162-33.fbx.proxad.net [81.57.162.33]) by smtp3-g19.free.fr (Postfix) with ESMTP id AD5504978D for ; Wed, 14 Jun 2006 16:59:30 +0200 (CEST) Sender: linux-acpi-owner@vger.kernel.org List-Id: linux-acpi@vger.kernel.org To: linux-acpi@vger.kernel.org This is a multi-part message in MIME format. --------------010803080505090907040308 Content-Type: text/plain; charset=ISO-8859-15; format=flowed Content-Transfer-Encoding: 7bit Hi people, I got a laptop nx6125 and acpi is not able to refresh battery status. If I boot with ac on acpi sees that the battery is charging in /proc/acpi/battery/C179/* But if I unplug the ac, acpi sees that the battery is charged and whatever I do after the state is not modified !!! I use kernel 2.6.17-rc6, and U can see my dmesg output. Thanks. --------------010803080505090907040308 Content-Type: text/plain; name="dmesg" Content-Transfer-Encoding: 7bit Content-Disposition: inline; filename="dmesg" 6>Using pmtmr for high-res timesource Console: colour dummy device 80x25 Dentry cache hash table entries: 65536 (order: 6, 262144 bytes) Inode-cache hash table entries: 32768 (order: 5, 131072 bytes) Memory: 382820k/393024k available (1332k kernel code, 9556k reserved, 526k data, 152k init, 0k highmem) Checking if this processor honours the WP bit even in supervisor mode... Ok. Calibrating delay using timer specific routine.. 3598.12 BogoMIPS (lpj=7196259) Mount-cache hash table entries: 512 CPU: After generic identify, caps: 078bfbff c3d3fbff 00000000 00000000 00000001 00000000 00000001 CPU: After vendor identify, caps: 078bfbff c3d3fbff 00000000 00000000 00000001 00000000 00000001 CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) CPU: L2 Cache: 256K (64 bytes/line) CPU: After all inits, caps: 078bfbff c3d3fbff 00000000 00000410 00000001 00000000 00000001 CPU: AMD Mobile AMD Sempron(tm) 3100+ stepping 02 Checking 'hlt' instruction... OK. SMP alternatives: switching to UP code Freeing SMP alternatives: 0k freed ACPI: setting ELCR to 0200 (from 0e20) checking if image is initramfs... it is Freeing initrd memory: 3865k freed HP Compaq Laptop series board detected. Selecting BIOS-method for reboots. NET: Registered protocol family 16 ACPI: bus type pci registered PCI: Using MMCONFIG PCI: No mmconfig possible on 0:18 Setting up standard PCI resources ACPI: Subsystem revision 20060127 ACPI Error (evgpeblk-0284): Unknown GPE method type: C275 (name not of form _Lxx or _Exx) [20060127] ACPI Error (evgpeblk-0284): Unknown GPE method type: C276 (name not of form _Lxx or _Exx) [20060127] ACPI: Interpreter enabled ACPI: Using PIC for interrupt routing ACPI: PCI Root Bridge [C047] (0000:00) PCI: Probing PCI hardware (bus 00) ACPI: Assume root bridge [\_SB_.C047] bus is 0 PCI: Ignoring BAR0-3 of IDE controller 0000:00:14.1 Boot video device is 0000:01:05.0 PCI: Transparent bridge - 0000:00:14.4 ACPI: PCI Interrupt Routing Table [\_SB_.C047._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.C047.C048._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.C047.C0AB._PRT] ACPI: Power Resource [C1CF] (off) ACPI: Embedded Controller [C111] (gpe 17) interrupt mode. ACPI: Power Resource [C1B7] (on) ACPI: Power Resource [C1C7] (on) ACPI: PCI Interrupt Link [C0F0] (IRQs *10 11) ACPI: PCI Interrupt Link [C0F1] (IRQs 10 11) *5 ACPI: PCI Interrupt Link [C0F2] (IRQs 10 11) *0, disabled. ACPI: PCI Interrupt Link [C0F3] (IRQs *10 11) ACPI: PCI Interrupt Link [C0F4] (IRQs 10 *11) ACPI: PCI Interrupt Link [C0F5] (IRQs *9) ACPI: PCI Interrupt Link [C0F6] (IRQs 10 11) *5 ACPI: PCI Interrupt Link [C0F7] (IRQs *10 11) ACPI: Power Resource [C26C] (off) ACPI: Power Resource [C26D] (off) ACPI: Power Resource [C26E] (off) ACPI: Power Resource [C26F] (off) Linux Plug and Play Support v0.97 (c) Adam Belay PCI: Using ACPI for IRQ routing PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report PCI: Cannot allocate resource region 7 of bridge 0000:00:04.0 PCI: Cannot allocate resource region 8 of bridge 0000:00:04.0 PCI: Cannot allocate resource region 9 of bridge 0000:00:04.0 PCI: Cannot allocate resource region 7 of bridge 0000:00:05.0 PCI: Cannot allocate resource region 8 of bridge 0000:00:05.0 PCI: Cannot allocate resource region 9 of bridge 0000:00:05.0 PCI: Bridge: 0000:00:01.0 IO window: 2000-2fff MEM window: d0400000-d07fffff PREFETCH window: c0000000-cfffffff PCI: Bridge: 0000:00:04.0 IO window: disabled. MEM window: disabled. PREFETCH window: disabled. PCI: Bridge: 0000:00:05.0 IO window: disabled. MEM window: disabled. PREFETCH window: disabled. PCI: Bus 5, cardbus bridge: 0000:04:04.0 IO window: 00001000-000010ff IO window: 00001400-000014ff PREFETCH window: 30000000-31ffffff MEM window: 32000000-33ffffff PCI: Bridge: 0000:00:14.4 IO window: 1000-1fff MEM window: d0000000-d03fffff PREFETCH window: 30000000-31ffffff PCI: Setting latency timer of device 0000:00:04.0 to 64 PCI: Setting latency timer of device 0000:00:05.0 to 64 ACPI: PCI Interrupt Link [C0F4] enabled at IRQ 11 PCI: setting IRQ 11 as level-triggered ACPI: PCI Interrupt 0000:04:04.0[A] -> Link [C0F4] -> GSI 11 (level, low) -> IRQ 11 NET: Registered protocol family 2 IP route cache hash table entries: 4096 (order: 2, 16384 bytes) TCP established hash table entries: 16384 (order: 4, 65536 bytes) TCP bind hash table entries: 8192 (order: 3, 32768 bytes) TCP: Hash tables configured (established 16384 bind 8192) TCP reno registered audit: initializing netlink socket (disabled) audit(1150296180.708:1): initialized Initializing Cryptographic API io scheduler noop registered io scheduler deadline registered (default) io scheduler cfq registered vesafb: framebuffer at 0xc0000000, mapped to 0xd8880000, using 937k, total 131072k vesafb: mode is 800x600x8, linelength=800, pages=254 vesafb: protected mode interface info at c000:53c7 vesafb: scrolling: redraw vesafb: Pseudocolor: size=8:8:8:8, shift=0:0:0:0 Console: switching to colour frame buffer device 100x37 fb0: VESA VGA frame buffer device Real Time Clock Driver v1.12ac Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled ACPI: PCI Interrupt Link [C0F1] enabled at IRQ 10 PCI: setting IRQ 10 as level-triggered ACPI: PCI Interrupt 0000:00:14.6[B] -> Link [C0F1] -> GSI 10 (level, low) -> IRQ 10 ACPI: PCI interrupt for device 0000:00:14.6 disabled RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize loop: loaded (max 8 devices) tg3.c:v3.58 (May 22, 2006) ACPI: PCI Interrupt Link [C0F7] enabled at IRQ 10 ACPI: PCI Interrupt 0000:04:01.0[A] -> Link [C0F7] -> GSI 10 (level, low) -> IRQ 10 eth0: Tigon3 [partno(BCM95788A50) rev 3003 PHY(5705)] (PCI:33MHz:32-bit) 10/100/1000BaseT Ethernet 00:0f:b0:f6:12:14 eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] Split[0] WireSpeed[0] TSOcap[1] eth0: dma_rwctrl[763f0000] dma_mask[32-bit] PNP: No PS/2 controller found. Probing ports directly. i8042.c: Detected active multiplexing controller, rev 1.1. serio: i8042 AUX0 port at 0x60,0x64 irq 12 serio: i8042 AUX1 port at 0x60,0x64 irq 12 serio: i8042 AUX2 port at 0x60,0x64 irq 12 serio: i8042 AUX3 port at 0x60,0x64 irq 12 serio: i8042 KBD port at 0x60,0x64 irq 1 TCP bic registered NET: Registered protocol family 1 NET: Registered protocol family 17 ieee80211: 802.11 data/management/control stack, git-1.1.7 ieee80211: Copyright (C) 2004-2005 Intel Corporation ieee80211_crypt: registered algorithm 'NULL' ieee80211_crypt: registered algorithm 'WEP' ieee80211_crypt: registered algorithm 'CCMP' ieee80211_crypt: registered algorithm 'TKIP' Using IPI Shortcut mode ACPI wakeup devices: C047 C0AB C1CE C0DD C0E3 C0E8 C1D0 C1D1 ACPI: (supports S0 S3 S4 S5) Freeing unused kernel memory: 152k freed input: AT Translated Set 2 keyboard as /class/input/input0 ACPI: Fan [C270] (off) ACPI: Fan [C271] (off) ACPI: Fan [C272] (off) ACPI: Fan [C273] (off) ACPI: CPU0 (power states: C1[C1] C3[C3]) ACPI: Processor [C000] (supports 8 throttling states) ACPI: Thermal Zone [TZ1] (72 C) ACPI: Thermal Zone [TZ2] (61 C) ACPI: Thermal Zone [TZ3] (39 C) Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx ATIIXP: IDE controller at PCI slot 0000:00:14.1 ACPI: PCI Interrupt Link [C0F0] enabled at IRQ 10 ACPI: PCI Interrupt 0000:00:14.1[A] -> Link [C0F0] -> GSI 10 (level, low) -> IRQ 10 ATIIXP: chipset revision 0 ATIIXP: not 100% native mode: will probe irqs later ide0: BM-DMA at 0x3010-0x3017, BIOS settings: hda:DMA, hdb:pio ide1: BM-DMA at 0x3018-0x301f, BIOS settings: hdc:DMA, hdd:pio Probing IDE interface ide0... hda: ST98823A, ATA DISK drive ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 Probing IDE interface ide1... hdc: MATSHITAUJ-840D, ATAPI CD/DVD-ROM drive ide1 at 0x170-0x177,0x376 on irq 15 hda: max request size: 128KiB hda: 156301488 sectors (80026 MB) w/8192KiB Cache, CHS=65535/16/63 hda: cache flushes supported hda: hda1 hda2 hda3 hda4 hdc: ATAPI 24X DVD-ROM DVD-R CD-R/RW drive, 2048kB Cache Uniform CD-ROM driver Revision: 3.20 usbcore: registered new driver usbfs usbcore: registered new driver hub ohci_hcd: 2005 April 22 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI) ACPI: PCI Interrupt Link [C0F3] enabled at IRQ 10 ACPI: PCI Interrupt 0000:00:13.0[A] -> Link [C0F3] -> GSI 10 (level, low) -> IRQ 10 ohci_hcd 0000:00:13.0: OHCI Host Controller ohci_hcd 0000:00:13.0: new USB bus registered, assigned bus number 1 ohci_hcd 0000:00:13.0: irq 10, io mem 0xd0800000 ieee1394: Initialized config rom entry `ip1394' usb usb1: configuration #1 chosen from 1 choice hub 1-0:1.0: USB hub found hub 1-0:1.0: 4 ports detected ACPI: PCI Interrupt 0000:00:13.1[A] -> Link [C0F3] -> GSI 10 (level, low) -> IRQ 10 ohci_hcd 0000:00:13.1: OHCI Host Controller ohci_hcd 0000:00:13.1: new USB bus registered, assigned bus number 2 ohci_hcd 0000:00:13.1: irq 10, io mem 0xd0801000 usb usb2: configuration #1 chosen from 1 choice hub 2-0:1.0: USB hub found hub 2-0:1.0: 4 ports detected ACPI: PCI Interrupt 0000:00:13.2[A] -> Link [C0F3] -> GSI 10 (level, low) -> IRQ 10 ehci_hcd 0000:00:13.2: EHCI Host Controller ehci_hcd 0000:00:13.2: new USB bus registered, assigned bus number 3 ehci_hcd 0000:00:13.2: irq 10, io mem 0xd0802000 ehci_hcd 0000:00:13.2: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 usb usb3: configuration #1 chosen from 1 choice hub 3-0:1.0: USB hub found hub 3-0:1.0: 8 ports detected ACPI: PCI Interrupt Link [C0F5] enabled at IRQ 9 PCI: setting IRQ 9 as level-triggered ACPI: PCI Interrupt 0000:04:04.2[C] -> Link [C0F5] -> GSI 9 (level, low) -> IRQ 9 ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[9] MMIO=[d0013000-d00137ff] Max Packet=[2048] IR/IT contexts=[4/8] device-mapper: 4.6.0-ioctl (2006-02-17) initialised: dm-devel@redhat.com Attempting manual resume ReiserFS: dm-0: found reiserfs format "3.6" with standard journal ReiserFS: dm-0: using ordered data mode ReiserFS: dm-0: journal params: device dm-0, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30 ReiserFS: dm-0: checking transaction log (dm-0) ohci_hcd 0000:00:13.1: wakeup ReiserFS: dm-0: Using r5 hash to sort names usb 2-1: new full speed USB device using ohci_hcd and address 2 spurious 8259A interrupt: IRQ7. usb 2-1: configuration #1 chosen from 1 choice ieee1394: Host added: ID:BUS[0-00:1023] GUID[00023f992951000c] usb 2-3: new low speed USB device using ohci_hcd and address 3 usb 2-3: configuration #1 chosen from 1 choice usbcore: registered new driver hiddev input: Logitech USB Mouse as /class/input/input1 input: USB HID v1.10 Mouse [Logitech USB Mouse] on usb-0000:00:13.1-3 usbcore: registered new driver usbhid drivers/usb/input/hid-core.c: v2.6:USB HID core driver ACPI: PCI Interrupt 0000:04:04.0[A] -> Link [C0F4] -> GSI 11 (level, low) -> IRQ 11 Yenta: CardBus bridge found at 0000:04:04.0 [103c:308b] sdhci: Secure Digital Host Controller Interface driver, 0.12 sdhci: Copyright(c) Pierre Ossman Yenta: ISA IRQ mask 0x00f8, PCI irq 11 Socket status: 30000006 pcmcia: parent PCI bridge I/O window: 0x1000 - 0x1fff pcmcia: parent PCI bridge Memory window: 0xd0000000 - 0xd03fffff pcmcia: parent PCI bridge Memory window: 0x30000000 - 0x31ffffff sdhci: SDHCI controller found at 0000:04:04.4 [104c:8034] (rev 0) ACPI: PCI Interrupt 0000:04:04.4[C] -> Link [C0F5] -> GSI 9 (level, low) -> IRQ 9 mmc0: SDHCI at 0xd001a000 irq 9 DMA mmc1: SDHCI at 0xd001b000 irq 9 DMA mmc2: SDHCI at 0xd001c000 irq 9 DMA ACPI: PCI Interrupt 0000:00:14.6[B] -> Link [C0F1] -> GSI 10 (level, low) -> IRQ 10 mice: PS/2 mouse device common for all mice MC'97 0 converters and GPIO not ready (0x1) ACPI: PCI Interrupt 0000:00:14.5[B] -> Link [C0F1] -> GSI 10 (level, low) -> IRQ 10 Synaptics Touchpad, model: 1, fw: 6.2, id: 0x1a0b1, caps: 0xa04713/0x200000 input: SynPS/2 Synaptics TouchPad as /class/input/input2 ndiswrapper version 1.16 loaded (preempt=no,smp=no) ndiswrapper: driver bcmwl5 (Broadcom,04/21/2005, 3.100.65.1) loaded ACPI: PCI Interrupt Link [C0F6] enabled at IRQ 11 ACPI: PCI Interrupt 0000:04:02.0[A] -> Link [C0F6] -> GSI 11 (level, low) -> IRQ 11 ndiswrapper: using irq 11 wlan0: vendor: '' wlan0: ndiswrapper ethernet device 00:14:a5:6b:03:4a using driver bcmwl5, 14E4:4318:103C:1356.5.conf wlan0: encryption modes supported: WEP; TKIP with WPA, WPA2, WPA2PSK; AES/CCMP with WPA, WPA2, WPA2PSK powernow-k8: Found 1 AMD Athlon 64 / Opteron processors (version 1.60.2) powernow-k8: 0 : fid 0xa (1800 MHz), vid 0xa (1300 mV) powernow-k8: 1 : fid 0x8 (1600 MHz), vid 0xc (1250 mV) powernow-k8: 2 : fid 0x0 (800 MHz), vid 0x13 (1075 mV) cpu_init done, current fid 0xa, vid 0x8 powernow-k8: ph2 null fid transition 0xa Adding 2097144k swap on /dev/mapper/vg0-lv_swap. Priority:-1 extents:1 across:2097144k kjournald starting. Commit interval 5 seconds EXT3 FS on hda1, internal journal EXT3-fs: mounted filesystem with ordered data mode. ReiserFS: dm-8: found reiserfs format "3.6" with standard journal ReiserFS: dm-8: using ordered data mode ReiserFS: dm-8: journal params: device dm-8, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30 ReiserFS: dm-8: checking transaction log (dm-8) ReiserFS: dm-8: Using r5 hash to sort names ReiserFS: dm-1: found reiserfs format "3.6" with standard journal ReiserFS: dm-1: using ordered data mode ReiserFS: dm-1: journal params: device dm-1, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30 ReiserFS: dm-1: checking transaction log (dm-1) ReiserFS: dm-1: Using r5 hash to sort names ReiserFS: dm-2: found reiserfs format "3.6" with standard journal ReiserFS: dm-2: using ordered data mode ReiserFS: dm-2: journal params: device dm-2, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30 ReiserFS: dm-2: checking transaction log (dm-2) ReiserFS: dm-2: Using r5 hash to sort names kjournald starting. Commit interval 5 seconds EXT3 FS on dm-5, internal journal EXT3-fs: mounted filesystem with ordered data mode. kjournald starting. Commit interval 5 seconds EXT3 FS on dm-6, internal journal EXT3-fs: mounted filesystem with ordered data mode. kjournald starting. Commit interval 5 seconds EXT3 FS on dm-7, internal journal EXT3-fs: mounted filesystem with ordered data mode. ReiserFS: dm-3: found reiserfs format "3.6" with standard journal ReiserFS: dm-3: using ordered data mode ReiserFS: dm-3: journal params: device dm-3, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30 ReiserFS: dm-3: checking transaction log (dm-3) ReiserFS: dm-3: Using r5 hash to sort names ACPI: AC Adapter [C177] (on-line) ACPI: Power Button (FF) [PWRF] ACPI: Sleep Button (CM) [C1F0] ACPI: Lid Switch [C1F1] ACPI: Battery Slot [C179] (battery present) ACPI: Battery Slot [C178] (battery absent) pci_hotplug: PCI Hot Plug PCI Core version: 0.5 fakephp: Fake PCI Hot Plug Controller Driver hdc: cdrom_pc_intr: The drive appears confused (ireason = 0x01) hdc: cdrom_pc_intr: The drive appears confused (ireason = 0x01) hdc: cdrom_pc_intr: The drive appears confused (ireason = 0x01) hdc: cdrom_pc_intr: The drive appears confused (ireason = 0x01) hdc: cdrom_pc_intr: The drive appears confused (ireason = 0x01) hdc: cdrom_pc_intr: The drive appears confused (ireason = 0x01) --------------010803080505090907040308 Content-Type: text/x-vcard; charset=utf-8; name="cyril.scetbon.vcf" Content-Transfer-Encoding: 7bit Content-Disposition: attachment; filename="cyril.scetbon.vcf" begin:vcard fn:Cyril Scetbon n:Scetbon;Cyril email;internet:cyril.scetbon@free.fr version:2.1 end:vcard --------------010803080505090907040308--