f900000-ff9fffff [ 21.980923] PREFETCH window: dea00000-deafffff [ 21.980995] PCI: Enabling device 0000:00:1e.0 (0106 -> 0107) [ 21.981061] PCI: Setting latency timer of device 0000:00:1e.0 to 64 [ 21.981078] PCI: Enabling device 0000:02:01.0 (0000 -> 0003) [ 21.981839] ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 4 [ 21.981902] PCI: setting IRQ 4 as level-triggered [ 21.981909] ACPI: PCI Interrupt 0000:02:01.0[A] -> Link [LNKB] -> GSI 4 (level, low) -> IRQ 4 [ 21.982076] PCI: Setting latency timer of device 0000:02:01.0 to 64 [ 21.982772] ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 11 [ 21.982834] PCI: setting IRQ 11 as level-triggered [ 21.982841] ACPI: PCI Interrupt 0000:02:01.1[B] -> Link [LNKA] -> GSI 11 (level, low) -> IRQ 11 [ 21.983007] PCI: Setting latency timer of device 0000:02:01.1 to 64 [ 21.983043] NET: Registered protocol family 2 [ 22.063775] IP route cache hash table entries: 4096 (order: 2, 16384 bytes) [ 22.063914] TCP established hash table entries: 16384 (order: 5, 131072 bytes) [ 22.064234] TCP bind hash table entries: 16384 (order: 4, 65536 bytes) [ 22.064436] TCP: Hash tables configured (established 16384 bind 16384) [ 22.064499] TCP reno registered [ 22.093962] checking if image is initramfs... it is [ 22.096815] Freeing initrd memory: 10k freed [ 22.096979] Machine check exception polling timer started. [ 22.097809] Installing knfsd (copyright (C) 1996 okir@monad.swb.de). [ 22.098071] NTFS driver 2.1.28 [Flags: R/O]. [ 22.098169] fuse init (API version 7.8) [ 22.098358] io scheduler noop registered [ 22.098461] io scheduler anticipatory registered (default) [ 22.098608] io scheduler deadline registered [ 22.098723] io scheduler cfq registered [ 22.100531] ACPI: AC Adapter [AC] (off-line) [ 22.232334] ACPI: Battery Slot [BAT1] (battery present) [ 22.232573] input: Power Button (FF) as /class/input/input0 [ 22.232636] ACPI: Power Button (FF) [PWRF] [ 22.233610] input: Lid Switch as /class/input/input1 [ 22.233682] ACPI: Lid Switch [LID] [ 22.233856] input: Sleep Button (CM) as /class/input/input2 [ 22.233918] ACPI: Sleep Button (CM) [SLPB] [ 22.234084] input: Power Button (CM) as /class/input/input3 [ 22.234146] ACPI: Power Button (CM) [PWRB] [ 22.234557] ACPI: Video Device [VGA] (multi-head: yes rom: no post: no) [ 22.234737] ACPI: Invalid PBLK length [7] [ 22.236803] ACPI: CPU0 (power states: C1[C1] C2[C2]) [ 22.264306] ACPI: Thermal Zone [THRM] (56 C) [ 22.264462] Asus Laptop ACPI Extras version 0.30 [ 22.264838] M6NE model detected, supported [ 22.323918] lp: driver loaded but no devices found [ 22.324012] intel_rng: FWH not detected [ 22.324071] Linux agpgart interface v0.102 (c) Dave Jones [ 22.324202] agpgart: Detected an Intel 855PM Chipset. [ 22.340657] agpgart: AGP aperture is 256M @ 0xe0000000 [ 22.340755] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing disabled [ 22.341169] serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a NS16550A [ 22.342342] ACPI: PCI Interrupt 0000:00:1f.6[B] -> Link [LNKB] -> GSI 4 (level, low) -> IRQ 4 [ 22.342600] parport: PnPBIOS parport detected. [ 22.342688] parport0: PC-style at 0x378 (0x778), irq 7 [PCSPP(,...)] [ 22.343078] lp0: using parport0 (interrupt-driven). [ 22.344205] RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize [ 22.344726] loop: loaded (max 8 devices) [ 22.344921] tg3.c:v3.73 (February 12, 2007) [ 22.344996] ACPI: PCI Interrupt 0000:02:00.0[A] -> Link [LNKB] -> GSI 4 (level, low) -> IRQ 4 [ 22.408789] eth0: Tigon3 [partno(BCM95788A50) rev 3003 PHY(5705)] (PCI:33MHz:32-bit) 10/100/1000Base-T Ethernet 00:11:2f:8d:b2:b5 [ 22.409130] eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] Split[0] WireSpeed[0] TSOcap[1] [ 22.409204] eth0: dma_rwctrl[763f0000] dma_mask[32-bit] [ 22.409414] PPP generic driver version 2.4.2 [ 22.409701] ata_piix 0000:00:1f.1: version 2.00ac7 [ 22.409717] PCI: Enabling device 0000:00:1f.1 (0005 -> 0007) [ 22.409782] ACPI: PCI Interrupt 0000:00:1f.1[A] -> Link [LNKC] -> GSI 10 (level, low) -> IRQ 10 [ 22.409960] PCI: Setting latency timer of device 0000:00:1f.1 to 64 [ 22.410032] ata1: PATA max UDMA/100 cmd 0x000101f0 ctl 0x000103f6 bmdma 0x0001ffa0 irq 14 [ 22.410142] ata2: PATA max UDMA/100 cmd 0x00010170 ctl 0x00010376 bmdma 0x0001ffa8 irq 15 [ 22.410236] scsi0 : ata_piix [ 22.583969] ACPI Error (dsopcode-0481): Attempt to CreateField of length zero [20070126] [ 22.584136] ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.PCI0.IDE0.RATA] (Node c14776d0), AE_AML_OPERAND_VALUE [ 22.584457] ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.PCI0.IDE0.CHN0.DRV0._GTF] (Node c1479d9c), AE_AML_OPERAND_VALUE [ 22.584769] ata1.00: ATA-6: IC25N060ATMR04-0, MO3OAD4A, max UDMA/100 [ 22.584833] ata1.00: 117210240 sectors, multi 16: LBA48 [ 22.603861] ACPI Error (dsopcode-0481): Attempt to CreateField of length zero [20070126] [ 22.604025] ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.PCI0.IDE0.RATA] (Node c14776d0), AE_AML_OPERAND_VALUE [ 22.604333] ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.PCI0.IDE0.CHN0.DRV0._GTF] (Node c1479d9c), AE_AML_OPERAND_VALUE [ 22.604642] ata1.00: configured for UDMA/100 [ 22.604708] scsi1 : ata_piix [ 22.763713] scsi 0:0:0:0: Direct-Access ATA IC25N060ATMR04-0 MO3O PQ: 0 ANSI: 5 [ 22.763931] SCSI device sda: 117210240 512-byte hdwr sectors (60012 MB) [ 22.764052] sda: Write Protect is off [ 22.764111] sda: Mode Sense: 00 3a 00 00 [ 22.764140] SCSI device sda: write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 22.764278] SCSI device sda: 117210240 512-byte hdwr sectors (60012 MB) [ 22.764353] sda: Write Protect is off [ 22.764411] sda: Mode Sense: 00 3a 00 00 [ 22.764439] SCSI device sda: write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 22.764513] sda: sda1 sda2 sda3 sda4 < sda5 sda6 > [ 22.827901] sd 0:0:0:0: Attached scsi disk sda [ 22.828065] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 22.828270] ieee1394: raw1394: /dev/raw1394 device initialized [ 22.828440] Yenta: CardBus bridge found at 0000:02:01.0 [1043:1864] [ 22.963884] Yenta: ISA IRQ mask 0x0028, PCI irq 4 [ 22.963945] Socket status: 30000006 [ 22.964004] Yenta: Raising subordinate bus# of parent bus (#02) from #02 to #06 [ 22.964078] pcmcia: parent PCI bridge I/O window: 0x1000 - 0x1fff [ 22.964141] cs: IO port probe 0x1000-0x1fff: clean. [ 22.964812] pcmcia: parent PCI bridge Memory window: 0xff900000 - 0xff9fffff [ 22.964877] pcmcia: parent PCI bridge Memory window: 0xdea00000 - 0xdeafffff [ 23.223369] Yenta: CardBus bridge found at 0000:02:01.1 [1043:1864] [ 23.363644] Yenta: ISA IRQ mask 0x0028, PCI irq 11 [ 23.363704] Socket status: 30000006 [ 23.363763] Yenta: Raising subordinate bus# of parent bus (#02) from #06 to #0a [ 23.363836] pcmcia: parent PCI bridge I/O window: 0x1000 - 0x1fff [ 23.363899] cs: IO port probe 0x1000-0x1fff: clean. [ 23.364567] pcmcia: parent PCI bridge Memory window: 0xff900000 - 0xff9fffff [ 23.364632] pcmcia: parent PCI bridge Memory window: 0xdea00000 - 0xdeafffff [ 23.623237] usbmon: debugfs is not available [ 23.624082] ACPI: PCI Interrupt Link [LNKH] enabled at IRQ 10 [ 23.624146] ACPI: PCI Interrupt 0000:00:1d.7[D] -> Link [LNKH] -> GSI 10 (level, low) -> IRQ 10 [ 23.624316] PCI: Setting latency timer of device 0000:00:1d.7 to 64 [ 23.624324] ehci_hcd 0000:00:1d.7: EHCI Host Controller [ 23.624474] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1 [ 23.624595] ehci_hcd 0000:00:1d.7: debug port 1 [ 23.624660] PCI: cache line size of 32 is not supported by device 0000:00:1d.7 [ 23.624673] ehci_hcd 0000:00:1d.7: irq 10, io mem 0xffaffc00 [ 23.628614] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 [ 23.628903] usb usb1: configuration #1 chosen from 1 choice [ 23.629033] hub 1-0:1.0: USB hub found [ 23.629101] hub 1-0:1.0: 6 ports detected [ 23.733365] USB Universal Host Controller Interface driver v3.0 [ 23.733488] ACPI: PCI Interrupt 0000:00:1d.0[A] -> Link [LNKA] -> GSI 11 (level, low) -> IRQ 11 [ 23.733656] PCI: Setting latency timer of device 0000:00:1d.0 to 64 [ 23.733664] uhci_hcd 0000:00:1d.0: UHCI Host Controller [ 23.733785] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2 [ 23.733880] uhci_hcd 0000:00:1d.0: irq 11, io base 0x0000e800 [ 23.734162] usb usb2: configuration #1 chosen from 1 choice [ 23.734292] hub 2-0:1.0: USB hub found [ 23.734359] hub 2-0:1.0: 2 ports detected [ 23.844021] ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 5 [ 23.844085] PCI: setting IRQ 5 as level-triggered [ 23.844092] ACPI: PCI Interrupt 0000:00:1d.1[B] -> Link [LNKD] -> GSI 5 (level, low) -> IRQ 5 [ 23.844259] PCI: Setting latency timer of device 0000:00:1d.1 to 64 [ 23.844267] uhci_hcd 0000:00:1d.1: UHCI Host Controller [ 23.844389] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3 [ 23.844485] uhci_hcd 0000:00:1d.1: irq 5, io base 0x0000e880 [ 23.844768] usb usb3: configuration #1 chosen from 1 choice [ 23.844899] hub 3-0:1.0: USB hub found [ 23.844966] hub 3-0:1.0: 2 ports detected [ 23.953280] ACPI: PCI Interrupt 0000:00:1d.2[C] -> Link [LNKC] -> GSI 10 (level, low) -> IRQ 10 [ 23.953448] PCI: Setting latency timer of device 0000:00:1d.2 to 64 [ 23.953455] uhci_hcd 0000:00:1d.2: UHCI Host Controller [ 23.953571] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4 [ 23.953665] uhci_hcd 0000:00:1d.2: irq 10, io base 0x0000ec00 [ 23.953944] usb usb4: configuration #1 chosen from 1 choice [ 23.954077] hub 4-0:1.0: USB hub found [ 23.954143] hub 4-0:1.0: 2 ports detected [ 24.063300] usbcore: registered new interface driver usblp [ 24.063363] drivers/usb/class/usblp.c: v0.13: USB Printer Device Class driver [ 24.063427] Initializing USB Mass Storage driver... [ 24.063538] usbcore: registered new interface driver usb-storage [ 24.063600] USB Mass Storage support registered. [ 24.063714] usbcore: registered new interface driver usbhid [ 24.063776] drivers/usb/input/hid-core.c: v2.6:USB HID core driver [ 24.063971] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f12:PS2M] at 0x60,0x64 irq 1,12 [ 24.066601] i8042.c: Detected active multiplexing controller, rev 1.1. [ 24.067999] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 24.068100] serio: i8042 AUX0 port at 0x60,0x64 irq 12 [ 24.068162] serio: i8042 AUX1 port at 0x60,0x64 irq 12 [ 24.068223] serio: i8042 AUX2 port at 0x60,0x64 irq 12 [ 24.068285] serio: i8042 AUX3 port at 0x60,0x64 irq 12 [ 24.068582] mice: PS/2 mouse device common for all mice [ 24.097569] input: AT Translated Set 2 keyboard as /class/input/input4 [ 24.143240] ieee1394: Host added: ID:BUS[0-00:1023] GUID[00e01800031fe66b] [ 24.226733] sdhci: Secure Digital Host Controller Interface driver [ 24.226796] sdhci: Copyright(c) Pierre Ossman [ 24.257008] Advanced Linux Sound Architecture Driver Version 1.0.14rc2 (Wed Feb 14 07:42:13 2007 UTC). [ 24.257548] ACPI: PCI Interrupt 0000:00:1f.5[B] -> Link [LNKB] -> GSI 4 (level, low) -> IRQ 4 [ 24.257733] PCI: Setting latency timer of device 0000:00:1f.5 to 64 [ 24.893044] Synaptics Touchpad, model: 1, fw: 4.6, id: 0x925ea1, caps: 0x80471b/0x0 [ 24.933134] input: SynPS/2 Synaptics TouchPad as /class/input/input5 [ 25.102708] intel8x0_measure_ac97_clock: measured 60001 usecs [ 25.102771] intel8x0: clocking to 48000 [ 25.104327] ALSA device list: [ 25.104386] #0: Intel 82801DB-ICH4 with STAC9750,51 at irq 4 [ 25.104607] TCP cubic registered [ 25.104675] NET: Registered protocol family 1 [ 25.104736] NET: Registered protocol family 17 [ 25.105243] speedstep-centrino with X86_SPEEDSTEP_CENTRINO_ACPI config is deprecated. [ 25.105248] Use X86_ACPI_CPUFREQ (acpi-cpufreq) instead. [ 9.403531] Using IPI Shortcut mode [ 9.410530] Time: acpi_pm clocksource has been installed. [ 9.428338] kjournald starting. Commit interval 5 seconds [ 9.428399] EXT3-fs: mounted filesystem with ordered data mode. [ 9.428478] VFS: Mounted root (ext3 filesystem) readonly. [ 9.428661] Freeing unused kernel memory: 228k freed [ 9.550321] Clocksource tsc unstable (delta = 244793800 ns) [ 14.844078] ieee80211_crypt: registered algorithm 'NULL' [ 14.845288] ieee80211: 802.11 data/management/control stack, git-1.1.13 [ 14.845291] ieee80211: Copyright (C) 2004-2005 Intel Corporation [ 14.847369] ipw2200: Intel(R) PRO/Wireless 2200/2915 Network Driver, 1.2.0km [ 14.847373] ipw2200: Copyright(c) 2003-2006 Intel Corporation [ 14.847463] ACPI: PCI Interrupt 0000:02:02.0[A] -> Link [LNKB] -> GSI 4 (level, low) -> IRQ 4 [ 14.847508] ipw2200: Detected Intel PRO/Wireless 2200BG Network Connection [ 15.016674] cs: IO port probe 0x100-0x3af: clean. [ 15.018412] cs: IO port probe 0x3e0-0x4ff: excluding 0x4d0-0x4d7 [ 15.018749] cs: IO port probe 0x820-0x8ff: clean. [ 15.019369] cs: IO port probe 0xc00-0xcf7: clean. [ 15.020135] cs: IO port probe 0xa00-0xaff: clean. [ 15.020960] cs: IO port probe 0x100-0x3af: clean. [ 15.022765] cs: IO port probe 0x3e0-0x4ff: excluding 0x4d0-0x4d7 [ 15.023102] cs: IO port probe 0x820-0x8ff: clean. [ 15.023721] cs: IO port probe 0xc00-0xcf7: clean. [ 15.024485] cs: IO port probe 0xa00-0xaff: clean. [ 15.343208] ipw2200: Detected geography ZZM (11 802.11bg channels, 0 802.11a channels) [ 15.613097] EXT3-fs warning: maximal mount count reached, running e2fsck is recommended [ 15.613344] EXT3 FS on sda5, internal journal [ 16.119416] NTFS volume version 3.1. [ 16.218893] Adding 506008k swap on /dev/sda6. Priority:-1 extents:1 across:506008k [ 26.589279] PM: Writing back config space on device 0000:02:00.0 at offset b (was 3ed173b, writing 17351043) [ 26.589295] PM: Writing back config space on device 0000:02:00.0 at offset 3 (was 0, writing 4010) [ 26.589301] PM: Writing back config space on device 0000:02:00.0 at offset 2 (was 2000000, writing 2000003) [ 26.589307] PM: Writing back config space on device 0000:02:00.0 at offset 1 (was 2b00000, writing 2b00106) [ 26.589313] PM: Writing back config space on device 0000:02:00.0 at offset 0 (was 3ed173b, writing 169c14e4) [ 74.971903] tg3: eth0: Link is up at 100 Mbps, full duplex. [ 74.971913] tg3: eth0: Flow control is on for TX and on for RX. [ 429.399676] [drm] Initialized drm 1.1.0 20060810 [ 429.485331] ACPI: PCI Interrupt 0000:01:00.0[A] -> Link [LNKA] -> GSI 11 (level, low) -> IRQ 11 [ 429.486282] [drm] Initialized radeon 1.25.0 20060524 on minor 0 [ 430.701994] agpgart: Found an AGP 2.0 compliant device at 0000:00:00.0. [ 430.702021] agpgart: Putting AGP V2 device at 0000:00:00.0 into 4x mode [ 430.702064] agpgart: Putting AGP V2 device at 0000:01:00.0 into 4x mode [ 430.989179] [drm] Setting GART location based on new memory map [ 430.989195] [drm] Loading R300 Microcode [ 430.989254] [drm] writeback test succeeded in 2 usecs [ 444.783872] mtrr: no MTRR for d0000000,4000000 found [ 456.861987] agpgart: Found an AGP 2.0 compliant device at 0000:00:00.0. [ 456.862016] agpgart: Putting AGP V2 device at 0000:00:00.0 into 4x mode [ 456.862059] agpgart: Putting AGP V2 device at 0000:01:00.0 into 4x mode [ 457.106814] [drm] Setting GART location based on new memory map [ 457.106830] [drm] Loading R300 Microcode [ 457.106890] [drm] writeback test succeeded in 2 usecs