From mboxrd@z Thu Jan 1 00:00:00 1970 From: Dario Castellarin Subject: Dell Inspiron 1501 - dmidecode Date: Tue, 17 Jul 2007 14:05:23 +0200 Message-ID: <469CB083.10101@tiscali.it> Mime-Version: 1.0 Content-Type: multipart/mixed; boundary="------------000204070209020201010505" Return-path: Received: from joe.tiscali.it ([213.205.33.54]:40833 "EHLO joe.tiscali.it" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1750985AbXGQML0 (ORCPT ); Tue, 17 Jul 2007 08:11:26 -0400 Received: from localhost.localdomain (84.223.87.232) by joe.tiscali.it (7.2.079) id 465A9B16007A1DC3 for linux-acpi@vger.kernel.org; Tue, 17 Jul 2007 14:05:27 +0200 Sender: linux-acpi-owner@vger.kernel.org List-Id: linux-acpi@vger.kernel.org To: linux-acpi@vger.kernel.org This is a multi-part message in MIME format. --------------000204070209020201010505 Content-Type: text/plain; charset=ISO-8859-15; format=flowed Content-Transfer-Encoding: 7bit Hello, while testing kernel 2.6.22.1-20.fc7 on Fedora 7 x86_64on my Dell Inspiron 1501 with the latest available BIOS version 2.4.1, I jumped into this: ACPI: System BIOS is requesting _OSI(Linux) ACPI: Please test with "acpi_osi=!Linux" Please send dmidecode to linux-acpi@vger.kernel.org Adding acpi_osi=!Linux to the kenrel command line didn't change anything, so here I send the output of dmesg and dmidecode, I'm available for any further request or testing. Dario --------------000204070209020201010505 Content-Type: text/plain; name="dmesg.txt" Content-Transfer-Encoding: 7bit Content-Disposition: inline; filename="dmesg.txt" Linux version 2.6.22.1-20.fc7 (kojibuilder@xenbuilder2.fedora.redhat.com) (gcc version 4.1.2 20070502 (Red Hat 4.1.2-12)) #1 SMP Thu Jul 12 19:40:48 EDT 2007 Command line: ro root=/dev/VolGroup00/LogVol00 rhgb quiet BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000009dc00 (usable) BIOS-e820: 000000000009dc00 - 00000000000a0000 (reserved) BIOS-e820: 00000000000ce000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 0000000037e70000 (usable) BIOS-e820: 0000000037e70000 - 0000000037e80000 (ACPI data) BIOS-e820: 0000000037e80000 - 0000000037f00000 (ACPI NVS) BIOS-e820: 0000000037f00000 - 0000000040000000 (reserved) BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved) BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved) BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved) Entering add_active_range(0, 0, 157) 0 entries of 3200 used Entering add_active_range(0, 256, 228976) 1 entries of 3200 used end_pfn_map = 1048576 DMI present. ACPI: RSDP 000F8500, 0014 (r0 PTLTD ) ACPI: RSDT 37E7956A, 0040 (r1 DELL M08 6040000 LTP 0) ACPI: FACP 37E7FB9A, 0074 (r1 ATI Bowfin 6040000 ATI F4240) ACPI: DSDT 37E795AA, 65F0 (r1 ATI SB600 6040000 MSFT 3000000) ACPI: FACS 37E90FC0, 0040 ACPI: TCPA 37E7FC0E, 0032 (r2 AMD 6040000 PTEC 0) ACPI: SSDT 37E7FC40, 0182 (r1 PTLTD POWERNOW 6040000 LTP 1) ACPI: APIC 37E7FDC2, 0054 (r1 PTLTD APIC 6040000 LTP 0) ACPI: MCFG 37E7FE16, 003C (r1 PTLTD MCFG 6040000 LTP 0) ACPI: HPET 37E7FE52, 0038 (r1 PTLTD HPETTBL 6040000 LTP 1) ACPI: SLIC 37E7FE8A, 0176 (r1 DELL M08 6040000 LTP 0) Scanning NUMA topology in Northbridge 24 No NUMA configuration found Faking a node at 0000000000000000-0000000037e70000 Entering add_active_range(0, 0, 157) 0 entries of 3200 used Entering add_active_range(0, 256, 228976) 1 entries of 3200 used Bootmem setup node 0 0000000000000000-0000000037e70000 Zone PFN ranges: DMA 0 -> 4096 DMA32 4096 -> 1048576 Normal 1048576 -> 1048576 early_node_map[2] active PFN ranges 0: 0 -> 157 0: 256 -> 228976 On node 0 totalpages: 228877 DMA zone: 56 pages used for memmap DMA zone: 1302 pages reserved DMA zone: 2639 pages, LIFO batch:0 DMA32 zone: 3074 pages used for memmap DMA32 zone: 221806 pages, LIFO batch:31 Normal zone: 0 pages used for memmap ATI board detected. Disabling timer routing over 8254. ACPI: PM-Timer IO Port: 0x8008 ACPI: Local APIC address 0xfee00000 ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) Processor #0 (Bootup-CPU) ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled) Processor #1 ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) IOAPIC[0]: apic_id 2, address 0xfec00000, GSI 0-23 ACPI: IRQ9 used by override. Setting APIC routing to flat ACPI: HPET id: 0x43538301 base: 0xfed00000 Using ACPI (MADT) for SMP configuration information swsusp: Registered nosave memory region: 000000000009d000 - 000000000009e000 swsusp: Registered nosave memory region: 000000000009e000 - 00000000000a0000 swsusp: Registered nosave memory region: 00000000000a0000 - 00000000000ce000 swsusp: Registered nosave memory region: 00000000000ce000 - 0000000000100000 Allocating PCI resources starting at 50000000 (gap: 40000000:a0000000) SMP: Allowing 2 CPUs, 0 hotplug CPUs PERCPU: Allocating 40968 bytes of per cpu data Built 1 zonelists. Total pages: 224445 Kernel command line: ro root=/dev/VolGroup00/LogVol00 rhgb quiet Initializing CPU#0 PID hash table entries: 4096 (order: 12, 32768 bytes) Marking TSC unstable due to TSCs unsynchronized time.c: Detected 1596.008 MHz processor. Console: colour VGA+ 80x25 Checking aperture... CPU 0: aperture @ 5b88000000 size 32 MB Aperture too small (32 MB) No AGP bridge found Memory: 893752k/915904k available (2366k kernel code, 21756k reserved, 1401k data, 312k init) SLUB: Genslabs=23, HWalign=64, Order=0-1, MinObjects=4, CPUs=2, Nodes=1 Calibrating delay using timer specific routine.. 3194.24 BogoMIPS (lpj=1597124) Security Framework v1.0.0 initialized SELinux: Initializing. SELinux: Starting in permissive mode selinux_register_security: Registering secondary module capability Capability LSM initialized as secondary Dentry cache hash table entries: 131072 (order: 8, 1048576 bytes) Inode-cache hash table entries: 65536 (order: 7, 524288 bytes) Mount-cache hash table entries: 256 CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) CPU: L2 Cache: 512K (64 bytes/line) CPU 0/0 -> Node 0 CPU: Physical Processor ID: 0 CPU: Processor Core ID: 0 SMP alternatives: switching to UP code ACPI: Core revision 20070126 ..MP-BIOS bug: 8254 timer not connected to IO-APIC Using local APIC timer interrupts. result 12468826 Detected 12.468 MHz APIC timer. SMP alternatives: switching to SMP code Booting processor 1/2 APIC 0x1 Initializing CPU#1 Calibrating delay using timer specific routine.. 3191.96 BogoMIPS (lpj=1595981) CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) CPU: L2 Cache: 512K (64 bytes/line) CPU 1/1 -> Node 0 CPU: Physical Processor ID: 0 CPU: Processor Core ID: 1 AMD Turion(tm) 64 X2 Mobile Technology TL-52 stepping 02 Brought up 2 CPUs sizeof(vma)=176 bytes sizeof(page)=56 bytes sizeof(inode)=560 bytes sizeof(dentry)=208 bytes sizeof(ext3inode)=760 bytes sizeof(buffer_head)=104 bytes sizeof(skbuff)=232 bytes sizeof(task_struct)=2048 bytes NET: Registered protocol family 16 ACPI: bus type pci registered PCI: Using MMCONFIG at e0000000 - e09fffff PCI: No mmconfig possible on device 00:18 ACPI: System BIOS is requesting _OSI(Linux) ACPI: Please test with "acpi_osi=!Linux" Please send dmidecode to linux-acpi@vger.kernel.org ACPI: Interpreter enabled ACPI: (supports S0 S3 S4 S5) ACPI: Using IOAPIC for interrupt routing ACPI: PCI Root Bridge [PCI0] (0000:00) PCI: Probing PCI hardware (bus 00) PCI: Transparent bridge - 0000:00:14.4 ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PB5_._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PB6_._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P2P_._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.AGP_._PRT] ACPI: PCI Interrupt Link [LNKA] (IRQs 10 11) *0, disabled. ACPI: PCI Interrupt Link [LNKB] (IRQs 10 11) *0, disabled. ACPI: PCI Interrupt Link [LNKC] (IRQs 10 11) *0, disabled. ACPI: PCI Interrupt Link [LNKD] (IRQs 10 11) *0, disabled. ACPI: PCI Interrupt Link [LNKE] (IRQs 10 11) *0, disabled. ACPI: PCI Interrupt Link [LNKF] (IRQs 10 11) *0, disabled. ACPI: PCI Interrupt Link [LNKG] (IRQs 10 11) *0, disabled. ACPI: PCI Interrupt Link [LNKH] (IRQs 10 11) *0, disabled. ACPI: PCI Interrupt Link [LNKU] (IRQs 3 4 5 7) *0, disabled. Linux Plug and Play Support v0.97 (c) Adam Belay pnp: PnP ACPI init ACPI: bus type pnp registered pnp: PnP ACPI: found 11 devices ACPI: ACPI bus type pnp unregistered usbcore: registered new interface driver usbfs usbcore: registered new interface driver hub usbcore: registered new device driver usb PCI: Using ACPI for IRQ routing PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report PCI: Cannot allocate resource region 7 of bridge 0000:00:05.0 PCI: Cannot allocate resource region 8 of bridge 0000:00:05.0 NetLabel: Initializing NetLabel: domain hash size = 128 NetLabel: protocols = UNLABELED CIPSOv4 NetLabel: unlabeled traffic allowed by default hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0 hpet0: 4 32-bit timers, 14318180 Hz ACPI: RTC can wake from S4 pnp: 00:01: iomem range 0xe0000000-0xefffffff could not be reserved pnp: 00:01: iomem range 0xfec00000-0xfec00fff could not be reserved pnp: 00:01: iomem range 0xfee00000-0xfee00fff could not be reserved pnp: 00:08: ioport range 0x1080-0x1080 has been reserved pnp: 00:08: ioport range 0x220-0x22f has been reserved pnp: 00:09: iomem range 0xe0000-0xfffff could not be reserved pnp: 00:09: iomem range 0xfff00000-0xffffffff could not be reserved pnp: 00:09: iomem range 0xc0004800-0xc0004bff has been reserved pnp: 00:09: iomem range 0xfed00000-0xfed003ff has been reserved PCI: Bridge: 0000:00:01.0 IO window: 9000-9fff MEM window: c0100000-c01fffff PREFETCH window: c8000000-cfffffff PCI: Bridge: 0000:00:05.0 IO window: disabled. MEM window: disabled. PREFETCH window: disabled. PCI: Bridge: 0000:00:06.0 IO window: disabled. MEM window: c0200000-c02fffff PREFETCH window: disabled. PCI: Bridge: 0000:00:14.4 IO window: disabled. MEM window: c0300000-c03fffff PREFETCH window: disabled. PCI: Setting latency timer of device 0000:00:05.0 to 64 PCI: Setting latency timer of device 0000:00:06.0 to 64 NET: Registered protocol family 2 Time: hpet clocksource has been installed. IP route cache hash table entries: 32768 (order: 6, 262144 bytes) TCP established hash table entries: 131072 (order: 9, 3145728 bytes) TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) TCP: Hash tables configured (established 131072 bind 65536) TCP reno registered checking if image is initramfs... it is Freeing initrd memory: 3754k freed audit: initializing netlink socket (disabled) audit(1184672762.632:1): initialized Total HugeTLB memory allocated, 0 VFS: Disk quotas dquot_6.5.1 Dquot-cache hash table entries: 512 (order 0, 4096 bytes) SELinux: Registering netfilter hooks ksign: Installing public key data Loading keyring - Added public key 1D871FA41536D38E - User ID: Red Hat, Inc. (Kernel Module GPG key) io scheduler noop registered io scheduler anticipatory registered io scheduler deadline registered io scheduler cfq registered (default) PCI: MSI quirk detected. MSI deactivated. Boot video device is 0000:01:05.0 PCI: Setting latency timer of device 0000:00:05.0 to 64 assign_interrupt_mode Found MSI capability Allocate Port Service[0000:00:05.0:pcie00] Allocate Port Service[0000:00:05.0:pcie02] PCI: Setting latency timer of device 0000:00:06.0 to 64 assign_interrupt_mode Found MSI capability Allocate Port Service[0000:00:06.0:pcie00] Allocate Port Service[0000:00:06.0:pcie02] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 ACPI: Processor [CPU0] (supports 8 throttling states) ACPI: Thermal Zone [THRM] (61 C) hpet_resources: 0xfed00000 is busy Generic RTC Driver v1.07 Non-volatile memory driver v1.2 Linux agpgart interface v0.102 (c) Dave Jones Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled RAMDISK driver initialized: 16 RAM disks of 16384K size 4096 blocksize input: Macintosh mouse button emulation as /class/input/input0 PNP: PS/2 Controller [PNP0303:KBC0,PNP0f13:MSE0] at 0x60,0x64 irq 1,12 serio: i8042 KBD port at 0x60,0x64 irq 1 serio: i8042 AUX port at 0x60,0x64 irq 12 mice: PS/2 mouse device common for all mice input: AT Translated Set 2 keyboard as /class/input/input1 usbcore: registered new interface driver hiddev usbcore: registered new interface driver usbhid drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver TCP cubic registered Initializing XFRM netlink socket NET: Registered protocol family 1 NET: Registered protocol family 17 powernow-k8: Found 2 AMD Turion(tm) 64 X2 Mobile Technology TL-52 processors (version 2.00.00) powernow-k8: 0 : fid 0x8 (1600 MHz), vid 0x13 powernow-k8: 1 : fid 0x0 (800 MHz), vid 0x1e drivers/rtc/hctosys.c: unable to open rtc device (rtc0) Freeing unused kernel memory: 312k freed Write protecting the kernel read-only data: 1060k USB Universal Host Controller Interface driver v3.0 ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver ACPI: PCI Interrupt 0000:00:13.0[A] -> GSI 16 (level, low) -> IRQ 16 ohci_hcd 0000:00:13.0: OHCI Host Controller ohci_hcd 0000:00:13.0: new USB bus registered, assigned bus number 1 ohci_hcd 0000:00:13.0: irq 16, io mem 0xc0005000 usb usb1: configuration #1 chosen from 1 choice hub 1-0:1.0: USB hub found hub 1-0:1.0: 2 ports detected ACPI: PCI Interrupt 0000:00:13.1[B] -> GSI 17 (level, low) -> IRQ 17 ohci_hcd 0000:00:13.1: OHCI Host Controller ohci_hcd 0000:00:13.1: new USB bus registered, assigned bus number 2 ohci_hcd 0000:00:13.1: irq 17, io mem 0xc0006000 usb usb2: configuration #1 chosen from 1 choice hub 2-0:1.0: USB hub found hub 2-0:1.0: 2 ports detected ACPI: PCI Interrupt 0000:00:13.2[C] -> GSI 18 (level, low) -> IRQ 18 ohci_hcd 0000:00:13.2: OHCI Host Controller ohci_hcd 0000:00:13.2: new USB bus registered, assigned bus number 3 ohci_hcd 0000:00:13.2: irq 18, io mem 0xc0007000 Synaptics Touchpad, model: 1, fw: 6.3, id: 0x180b1, caps: 0xa04713/0x200000 input: SynPS/2 Synaptics TouchPad as /class/input/input2 usb usb3: configuration #1 chosen from 1 choice hub 3-0:1.0: USB hub found hub 3-0:1.0: 2 ports detected ACPI: PCI Interrupt 0000:00:13.3[B] -> GSI 17 (level, low) -> IRQ 17 ohci_hcd 0000:00:13.3: OHCI Host Controller ohci_hcd 0000:00:13.3: new USB bus registered, assigned bus number 4 ohci_hcd 0000:00:13.3: irq 17, io mem 0xc0008000 usb usb4: configuration #1 chosen from 1 choice hub 4-0:1.0: USB hub found hub 4-0:1.0: 2 ports detected ACPI: PCI Interrupt 0000:00:13.4[C] -> GSI 18 (level, low) -> IRQ 18 ohci_hcd 0000:00:13.4: OHCI Host Controller ohci_hcd 0000:00:13.4: new USB bus registered, assigned bus number 5 ohci_hcd 0000:00:13.4: irq 18, io mem 0xc0009000 usb usb5: configuration #1 chosen from 1 choice hub 5-0:1.0: USB hub found hub 5-0:1.0: 2 ports detected ACPI: PCI Interrupt 0000:00:13.5[D] -> GSI 19 (level, low) -> IRQ 19 ehci_hcd 0000:00:13.5: EHCI Host Controller ehci_hcd 0000:00:13.5: new USB bus registered, assigned bus number 6 ehci_hcd 0000:00:13.5: debug port 1 ehci_hcd 0000:00:13.5: irq 19, io mem 0xc0004400 ehci_hcd 0000:00:13.5: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 usb usb6: configuration #1 chosen from 1 choice hub 6-0:1.0: USB hub found hub 6-0:1.0: 10 ports detected SCSI subsystem initialized libata version 2.21 loaded. ahci 0000:00:12.0: version 2.2 ACPI: PCI Interrupt 0000:00:12.0[A] -> GSI 22 (level, low) -> IRQ 22 ahci 0000:00:12.0: controller can't do 64bit DMA, forcing 32bit ahci 0000:00:12.0: AHCI 0001.0100 32 slots 4 ports 3 Gbps 0xf impl SATA mode ahci 0000:00:12.0: flags: ncq ilck led clo pmp pio scsi0 : ahci scsi1 : ahci scsi2 : ahci scsi3 : ahci ata1: SATA max UDMA/133 cmd 0xffffc200001f8100 ctl 0x0000000000000000 bmdma 0x0000000000000000 irq 22 ata2: SATA max UDMA/133 cmd 0xffffc200001f8180 ctl 0x0000000000000000 bmdma 0x0000000000000000 irq 22 ata3: SATA max UDMA/133 cmd 0xffffc200001f8200 ctl 0x0000000000000000 bmdma 0x0000000000000000 irq 22 ata4: SATA max UDMA/133 cmd 0xffffc200001f8280 ctl 0x0000000000000000 bmdma 0x0000000000000000 irq 22 ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300) ata1.00: ATA-7: Hitachi HTS541680J9SA00, SB2OC74P, max UDMA/100 ata1.00: 156301488 sectors, multi 16: LBA48 NCQ (depth 31/32) ata1.00: configured for UDMA/100 ata2: SATA link down (SStatus 0 SControl 300) ata3: SATA link down (SStatus 0 SControl 300) ata4: SATA link down (SStatus 0 SControl 300) scsi 0:0:0:0: Direct-Access ATA Hitachi HTS54168 SB2O PQ: 0 ANSI: 5 sd 0:0:0:0: [sda] 156301488 512-byte hardware sectors (80026 MB) sd 0:0:0:0: [sda] Write Protect is off sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sd 0:0:0:0: [sda] 156301488 512-byte hardware sectors (80026 MB) sd 0:0:0:0: [sda] Write Protect is off sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sda: sda1 sda2 sd 0:0:0:0: [sda] Attached SCSI disk ACPI: PCI Interrupt 0000:00:14.1[A] -> GSI 16 (level, low) -> IRQ 16 PCI: Setting latency timer of device 0000:00:14.1 to 64 scsi4 : pata_atiixp scsi5 : pata_atiixp ata5: PATA max UDMA/100 cmd 0x00000000000101f0 ctl 0x00000000000103f6 bmdma 0x0000000000018420 irq 14 ata6: PATA max UDMA/100 cmd 0x0000000000010170 ctl 0x0000000000010376 bmdma 0x0000000000018428 irq 15 ata5.00: ATAPI: TSSTcorp DVD+/-RW TS-L632D, DE04, max UDMA/33 ata5.00: configured for UDMA/33 scsi 4:0:0:0: CD-ROM TSSTcorp DVD+-RW TS-L632D DE04 PQ: 0 ANSI: 5 device-mapper: ioctl: 4.11.0-ioctl (2006-10-12) initialised: dm-devel@redhat.com kjournald starting. Commit interval 5 seconds EXT3-fs: mounted filesystem with ordered data mode. SELinux: Disabled at runtime. SELinux: Unregistering netfilter hooks audit(1184672773.196:2): selinux=0 auid=4294967295 sd 0:0:0:0: Attached scsi generic sg0 type 0 scsi 4:0:0:0: Attached scsi generic sg1 type 5 shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0 rtc0: alarms up to one month sr0: scsi3-mmc drive: 24x/24x writer cd/rw xa/form2 cdda tray Uniform CD-ROM driver Revision: 3.20 sr 4:0:0:0: Attached scsi CD-ROM sr0 b44.c:v1.01 (Jun 16, 2006) ACPI: PCI Interrupt 0000:08:00.0[A] -> GSI 21 (level, low) -> IRQ 21 eth0: Broadcom 4400 10/100BaseT Ethernet 00:15:c5:c1:ab:b8 sdhci: Secure Digital Host Controller Interface driver sdhci: Copyright(c) Pierre Ossman sdhci: SDHCI controller found at 0000:08:01.0 [1180:0822] (rev 19) ACPI: PCI Interrupt 0000:08:01.0[B] -> GSI 20 (level, low) -> IRQ 20 mmc0: SDHCI at 0xc0302800 irq 20 DMA ACPI: PCI Interrupt 0000:00:14.2[A] -> GSI 16 (level, low) -> IRQ 16 loop: module loaded floppy0: no floppy controllers found lp: driver loaded but no devices found NET: Registered protocol family 10 lo: Disabled Privacy Extensions Mobile IPv6 ACPI: PCI Interrupt 0000:01:05.0[A] -> GSI 17 (level, low) -> IRQ 17 ACPI: AC Adapter [ACAD] (on-line) ACPI: Battery Slot [BAT1] (battery present) No dock devices found. input: Power Button (FF) as /class/input/input3 ACPI: Power Button (FF) [PWRF] input: Power Button (CM) as /class/input/input4 ACPI: Power Button (CM) [PWRB] input: Sleep Button (CM) as /class/input/input5 ACPI: Sleep Button (CM) [SLPB] input: Lid Switch as /class/input/input6 ACPI: Lid Switch [LID] ACPI: Video Device [VGA] (multi-head: yes rom: no post: no) device-mapper: multipath: version 1.0.5 loaded EXT3 FS on dm-0, internal journal kjournald starting. Commit interval 5 seconds EXT3 FS on sda1, internal journal EXT3-fs: mounted filesystem with ordered data mode. Adding 1802232k swap on /dev/VolGroup00/LogVol01. Priority:-1 extents:1 across:1802232k ndiswrapper version 1.47 loaded (smp=yes) ndiswrapper (link_pe_images:576): fixing KI_USER_SHARED_DATA address in the driver ndiswrapper: driver bcmwl5 (Broadcom,10/12/2006, 4.100.15.5) loaded ACPI: PCI Interrupt 0000:05:00.0[A] -> GSI 18 (level, low) -> IRQ 18 PCI: Setting latency timer of device 0000:05:00.0 to 64 ndiswrapper: using IRQ 18 eth1: ethernet device 00:16:cf:c9:da:2a using NDIS driver: bcmwl5, version: 0x4640f05, NDIS version: 0x501, vendor: 'NDIS Network Adapter', 14E4:4312.5.conf eth1: encryption modes supported: WEP; TKIP with WPA, WPA2, WPA2PSK; AES/CCMP with WPA, WPA2, WPA2PSK usbcore: registered new interface driver ndiswrapper audit(1184672813.776:3): audit_pid=2209 old=0 by auid=4294967295 i2c /dev entries driver ADDRCONF(NETDEV_UP): eth1: link is not ready ADDRCONF(NETDEV_UP): eth0: link is not ready APIC error on CPU1: 00(40) ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready eth1: no IPv6 routers present APIC error on CPU1: 40(40) APIC error on CPU1: 40(40) APIC error on CPU1: 40(40) APIC error on CPU1: 40(40) --------------000204070209020201010505 Content-Type: text/plain; name="dmidecode.txt" Content-Transfer-Encoding: 7bit Content-Disposition: inline; filename="dmidecode.txt" # dmidecode 2.7 SMBIOS 2.4 present. 37 structures occupying 1321 bytes. Table at 0x000F0470. Handle 0xDA00, DMI type 218, 131 bytes. OEM-specific Type Header and Data: DA 83 00 DA B0 00 92 1B 07 02 00 7D 00 00 00 00 00 80 01 16 00 01 00 7F 01 16 00 00 00 75 01 75 01 01 00 76 01 76 01 01 00 2E 00 25 00 00 00 6E 00 25 00 01 00 2D 00 25 00 02 00 8A 01 48 00 01 00 89 01 48 00 00 00 9B 00 23 00 01 00 9C 00 23 00 00 00 14 01 46 00 00 00 15 01 46 00 01 00 16 01 46 00 02 00 94 01 47 00 01 00 93 01 47 00 00 00 EA 00 67 00 01 00 EB 00 67 00 00 00 FF FF 00 00 00 00 Handle 0x0001, DMI type 0, 24 bytes. BIOS Information Vendor: Dell Inc. Version: 2.4.1 Release Date: 05/30/2006 Address: 0xE58B0 Runtime Size: 108368 bytes ROM Size: 1024 kB Characteristics: PCI is supported PNP is supported BIOS is upgradeable BIOS shadowing is allowed ESCD support is available Boot from CD is supported Selectable boot is supported BIOS ROM is socketed EDD is supported 5.25"/360 KB floppy services are supported (int 13h) 5.25"/1.2 MB floppy services are supported (int 13h) 3.5"/720 KB floppy services are supported (int 13h) Print screen service is supported (int 5h) 8042 keyboard services are supported (int 9h) Serial services are supported (int 14h) Printer services are supported (int 17h) CGA/mono video services are supported (int 10h) ACPI is supported USB legacy is supported LS-120 boot is supported ATAPI Zip drive boot is supported BIOS boot specification is supported Targeted content distribution is supported Handle 0x0002, DMI type 1, 27 bytes. System Information Manufacturer: Dell Inc. Product Name: Inspiron 1501 Version: Not Specified Serial Number: 5NYFM2J UUID: 44454C4C-4E00-1059-8046-B5C04F4D324A Wake-up Type: Power Switch SKU Number: Not Specified Family: Not Specified Handle 0x0003, DMI type 2, 8 bytes. Base Board Information Manufacturer: Dell Inc. Product Name: 0UW744?????? Version: Serial Number: .5NYFM2J.CN486436AK1716. Handle 0x0004, DMI type 3, 17 bytes. Chassis Information Manufacturer: Dell Inc. Type: Portable Lock: Not Present Version: Not Specified Serial Number: 5NYFM2J Asset Tag: Boot-up State: Safe Power Supply State: Safe Thermal State: Safe Security Status: None OEM Information: 0x00001234 Handle 0x0005, DMI type 4, 35 bytes. Processor Information Socket Designation: Socket M2/S1G1 Type: Central Processor Family: Opteron Manufacturer: AMD ID: 82 0F 04 00 FF FB 8B 17 Signature: Extended Family 0, Model 8, Stepping 2 Flags: FPU (Floating-point unit on-chip) VME (Virtual mode extension) DE (Debugging extension) PSE (Page size extension) TSC (Time stamp counter) MSR (Model specific registers) PAE (Physical address extension) MCE (Machine check exception) CX8 (CMPXCHG8 instruction supported) APIC (On-chip APIC hardware supported) SEP (Fast system call) MTRR (Memory type range registers) PGE (Page global enable) MCA (Machine check architecture) CMOV (Conditional move instruction supported) PAT (Page attribute table) PSE-36 (36-bit page size extension) CLFSH (CLFLUSH instruction supported) MMX (MMX technology supported) FXSR (Fast floating-point save and restore) SSE (Streaming SIMD extensions) SSE2 (Streaming SIMD extensions 2) HTT (Hyper-threading technology) Version: Engineering Sample Voltage: 1.4 V External Clock: 200 MHz Max Speed: 4000 MHz Current Speed: 1600 MHz Status: Populated, Enabled Upgrade: Other L1 Cache Handle: Not Provided L2 Cache Handle: 0x0006 L3 Cache Handle: Not Provided Serial Number: Not Specified Asset Tag: Not Specified Part Number: Not Specified Handle 0x0006, DMI type 7, 19 bytes. Cache Information Socket Designation: L2 Cache Configuration: Enabled, Socketed, Level 2 Operational Mode: Write Back Location: Internal Installed Size: 1024 KB Maximum Size: 1024 KB Supported SRAM Types: Burst Pipeline Burst Installed SRAM Type: Synchronous Speed: Unknown Error Correction Type: Unknown System Type: Unknown Associativity: Unknown Handle 0x0007, DMI type 8, 9 bytes. Port Connector Information Internal Reference Designator: J28 Internal Connector Type: None External Reference Designator: Video External Connector Type: DB-15 female Port Type: Video Port Handle 0x0008, DMI type 8, 9 bytes. Port Connector Information Internal Reference Designator: J33 Internal Connector Type: None External Reference Designator: Keyboard External Connector Type: Circular DIN-8 male Port Type: Keyboard Port Handle 0x0009, DMI type 8, 9 bytes. Port Connector Information Internal Reference Designator: J33 Internal Connector Type: None External Reference Designator: PS/2 Mouse External Connector Type: Circular DIN-8 male Port Type: Keyboard Port Handle 0x000A, DMI type 8, 9 bytes. Port Connector Information Internal Reference Designator: J31 Internal Connector Type: None External Reference Designator: USB 1 External Connector Type: Access Bus (USB) Port Type: USB Handle 0x000B, DMI type 8, 9 bytes. Port Connector Information Internal Reference Designator: J32 Internal Connector Type: None External Reference Designator: USB 2 External Connector Type: Access Bus (USB) Port Type: USB Handle 0x000C, DMI type 8, 9 bytes. Port Connector Information Internal Reference Designator: J32 Internal Connector Type: None External Reference Designator: USB 3 External Connector Type: Access Bus (USB) Port Type: USB Handle 0x000D, DMI type 8, 9 bytes. Port Connector Information Internal Reference Designator: J31 Internal Connector Type: None External Reference Designator: USB 4 External Connector Type: Access Bus (USB) Port Type: USB Handle 0x000E, DMI type 8, 9 bytes. Port Connector Information Internal Reference Designator: J30 Internal Connector Type: None External Reference Designator: Microphone In External Connector Type: Mini Jack (headphones) Port Type: Audio Port Handle 0x000F, DMI type 8, 9 bytes. Port Connector Information Internal Reference Designator: J30 Internal Connector Type: None External Reference Designator: Line In External Connector Type: Mini Jack (headphones) Port Type: Audio Port Handle 0x0010, DMI type 8, 9 bytes. Port Connector Information Internal Reference Designator: J30 Internal Connector Type: None External Reference Designator: Speaker Out External Connector Type: Mini Jack (headphones) Port Type: Audio Port Handle 0x0011, DMI type 9, 13 bytes. System Slot Information Designation: PCI1 Type: 32-bit PCI Current Usage: Unknown Length: Long ID: 0 Characteristics: 5.0 V is provided 3.3 V is provided PME signal is supported Handle 0x0012, DMI type 9, 13 bytes. System Slot Information Designation: PCI2 Type: 32-bit PCI Current Usage: Unknown Length: Long ID: 0 Characteristics: 5.0 V is provided 3.3 V is provided PME signal is supported Handle 0x0013, DMI type 10, 6 bytes. On Board Device Information Type: Video Status: Disabled Description: ATI RS485M Handle 0x0014, DMI type 10, 6 bytes. On Board Device Information Type: Sound Status: Disabled Description: Sigmatel Handle 0x0015, DMI type 11, 5 bytes. OEM Strings String 1: Dell System String 2: 5 String 3: 13 Handle 0x0016, DMI type 12, 5 bytes. System Configuration Options Option 1: J13 1-2 Normal Operation, 2-3 Clear CMOS Handle 0x0017, DMI type 13, 22 bytes. BIOS Language Information Installable Languages: 1 enUS Currently Installed Language: enUS Handle 0x0018, DMI type 15, 29 bytes. System Event Log Area Length: 16 bytes Header Start Offset: 0x0000 Header Length: 16 bytes Data Start Offset: 0x0010 Access Method: General-purpose non-volatile data functions Access Address: 0x0000 Status: Valid, Not Full Change Token: 0x00000001 Header Format: Type 1 Supported Log Type Descriptors: 3 Descriptor 1: POST error Data Format 1: POST results bitmap Descriptor 2: Single-bit ECC memory error Data Format 2: Multiple-event Descriptor 3: Multi-bit ECC memory error Data Format 3: Multiple-event Handle 0x0019, DMI type 16, 15 bytes. Physical Memory Array Location: System Board Or Motherboard Use: System Memory Error Correction Type: None Maximum Capacity: 4 GB Error Information Handle: Not Provided Number Of Devices: 2 Handle 0x001A, DMI type 17, 27 bytes. Memory Device Array Handle: 0x0019 Error Information Handle: No Error Total Width: 128 bits Data Width: 64 bits Size: 512 MB Form Factor: DIMM Set: 1 Locator: DIMM_A Bank Locator: Type: DRAM Type Detail: Synchronous Speed: Unknown Manufacturer: Not Specified Serial Number: Not Specified Asset Tag: Not Specified Part Number: Not Specified Handle 0x001B, DMI type 17, 27 bytes. Memory Device Array Handle: 0x0019 Error Information Handle: No Error Total Width: 128 bits Data Width: 64 bits Size: 512 MB Form Factor: DIMM Set: 2 Locator: DIMM_B Bank Locator: Type: DRAM Type Detail: Synchronous Speed: Unknown Manufacturer: Not Specified Serial Number: Not Specified Asset Tag: Not Specified Part Number: Not Specified Handle 0x001C, DMI type 18, 23 bytes. 32-bit Memory Error Information Type: OK Granularity: Unknown Operation: Unknown Vendor Syndrome: Unknown Memory Array Address: Unknown Device Address: Unknown Resolution: Unknown Handle 0x001D, DMI type 19, 15 bytes. Memory Array Mapped Address Starting Address: 0x00000000000 Ending Address: 0x0003FFFFFFF Range Size: 1 GB Physical Array Handle: 0x0019 Partition Width: 0 Handle 0x001E, DMI type 20, 19 bytes. Memory Device Mapped Address Starting Address: 0x00000000000 Ending Address: 0x0001FFFFFFF Range Size: 512 MB Physical Device Handle: 0x001A Memory Array Mapped Address Handle: 0x001D Partition Row Position: 2 Interleave Position: 1 Interleaved Data Depth: 6 Handle 0x001F, DMI type 22, 26 bytes. Portable Battery Location: System Battery Bay Manufacturer: SIMPLO DELLRD8506 Name: SIMPLO DELLRD8506 Chemistry: Lithium Ion Design Capacity: 78000 mWh Design Voltage: 11100 mV SBDS Version: Bat123 Maximum Error: Unknown SBDS Serial Number: 0003 SBDS Manufacture Date: 1980-00-00 OEM-specific Information: 0x00000000 Handle 0x0020, DMI type 32, 20 bytes. System Boot Information Status: Handle 0xB100, DMI type 177, 12 bytes. OEM-specific Type Header and Data: B1 0C 00 B1 02 00 00 00 00 00 00 00 Handle 0xD000, DMI type 208, 10 bytes. OEM-specific Type Header and Data: D0 0A 00 D0 01 05 FE 00 F5 01 Handle 0xD400, DMI type 212, 17 bytes. OEM-specific Type Header and Data: D4 11 00 D4 70 00 71 00 00 10 2D 2E FF FF 00 00 00 Handle 0x0024, DMI type 127, 4 bytes. End Of Table --------------000204070209020201010505--