* Re: libata not working for sis5533 [not found] ` <46E3DA7E.7060709@gmail.com> @ 2007-09-11 22:46 ` Andrew Morton 2007-09-12 18:21 ` Jan Engelhardt 0 siblings, 1 reply; 5+ messages in thread From: Andrew Morton @ 2007-09-11 22:46 UTC (permalink / raw) To: patrizio.bassi Cc: Jan Engelhardt, Alan Cox, Michal Piotrowski, Kernel,, IDE/ATA development list, Alan Cox, Bartlomiej Zolnierkiewicz, Andi Kleen, linux-acpi On Sun, 09 Sep 2007 13:35:26 +0200 Patrizio Bassi <patrizio.bassi@gmail.com> wrote: > Patrizio Bassi ha scritto: > > Jan Engelhardt ha scritto: > >> On Sep 8 2007 11:38, Patrizio Bassi wrote: > >> > >>> Jan Engelhardt wrote: > >>> > >>>> I shall give this a spin too, since I happen to have sis5513. > >>>> > >>>> Just booted this fresh ata-enabled system (a matter of mkinitrd). > It has > >>>> not exploded yet. > >>>> > >>> don't you have the "irq 14" issue? > >>> > >> No, does not seem so. > >> > >> > >>> can you post here your .config? > >>> > >> http://rafb.net/p/vfTX0966.html > >> > >> Maybe it is solved in 2.6.22.3? (I don't remember what your version > >> was.) > >> > >> > >> Jan > >> > > > > For Alan, libata devs...hope can help debug... > > this is http://www.patriziobassi.it/downloads/libata_issue.jpg Looks more like a platform irq routing issue than an ata issue. Perhaps an x86 or an acpi person can help out with this. Probably nothing will happen, in which case I'll get back to you later and ask you to raise a bugzilla entry, not that this will get it fixed :( > > and this is the relative config i'm using > > http://www.patriziobassi.it/downloads/config > > > > Let me know > > > > Patrizio > > more debug: > > I tried as suggested with the irqpoll option, i just get a faster panic > as i don't have the 3 xfermode lines...but always impossibile to boot... > > Patrizio > - > To unsubscribe from this list: send the line "unsubscribe linux-kernel" in > the body of a message to majordomo@vger.kernel.org > More majordomo info at http://vger.kernel.org/majordomo-info.html > Please read the FAQ at http://www.tux.org/lkml/ ^ permalink raw reply [flat|nested] 5+ messages in thread
* Re: libata not working for sis5533 2007-09-11 22:46 ` libata not working for sis5533 Andrew Morton @ 2007-09-12 18:21 ` Jan Engelhardt 2007-09-12 18:49 ` Patrizio Bassi 0 siblings, 1 reply; 5+ messages in thread From: Jan Engelhardt @ 2007-09-12 18:21 UTC (permalink / raw) To: Andrew Morton Cc: patrizio.bassi, Alan Cox, Michal Piotrowski, Kernel,, IDE/ATA development list, Alan Cox, Bartlomiej Zolnierkiewicz, Andi Kleen, linux-acpi On Sep 11 2007 15:46, Andrew Morton wrote: >Patrizio Bassi <patrizio.bassi@gmail.com> wrote: >>Jan Engelhardt ha scritto: >>>On Sep 8 2007 11:38, Patrizio Bassi wrote: >>>>Jan Engelhardt wrote: >>>> >>>>> I shall give this a spin too, since I happen to have sis5513. Just >>>>> booted this fresh ata-enabled system (a matter of mkinitrd). It has not >>>>> exploded yet. >>>>> >>>> don't you have the "irq 14" issue? >>>> >>> No, does not seem so. >> >> For Alan, libata devs...hope can help debug... >> this is http://www.patriziobassi.it/downloads/libata_issue.jpg > >Looks more like a platform irq routing issue than an ata issue. > >Perhaps an x86 or an acpi person can help out with this. Patrizio, have you tried with the old IDE? (And without suspend at that...) Jan -- ^ permalink raw reply [flat|nested] 5+ messages in thread
* Re: libata not working for sis5533 2007-09-12 18:21 ` Jan Engelhardt @ 2007-09-12 18:49 ` Patrizio Bassi 2007-09-12 20:01 ` Jan Engelhardt 2007-09-12 20:44 ` Bartlomiej Zolnierkiewicz 0 siblings, 2 replies; 5+ messages in thread From: Patrizio Bassi @ 2007-09-12 18:49 UTC (permalink / raw) To: Jan Engelhardt Cc: Andrew Morton, Alan Cox, Michal Piotrowski, Kernel,, IDE/ATA development list, Alan Cox, Bartlomiej Zolnierkiewicz, Andi Kleen, linux-acpi Jan Engelhardt ha scritto: > On Sep 11 2007 15:46, Andrew Morton wrote: > >> Patrizio Bassi <patrizio.bassi@gmail.com> wrote: >> >>> Jan Engelhardt ha scritto: >>> >>>> On Sep 8 2007 11:38, Patrizio Bassi wrote: >>>> >>>>> Jan Engelhardt wrote: >>>>> >>>>> >>>>>> I shall give this a spin too, since I happen to have sis5513. Just >>>>>> booted this fresh ata-enabled system (a matter of mkinitrd). It has not >>>>>> exploded yet. >>>>>> >>>>>> >>>>> don't you have the "irq 14" issue? >>>>> >>>>> >>>> No, does not seem so. >>>> >>> For Alan, libata devs...hope can help debug... >>> this is http://www.patriziobassi.it/downloads/libata_issue.jpg >>> >> Looks more like a platform irq routing issue than an ata issue. >> >> Perhaps an x86 or an acpi person can help out with this. >> > > Patrizio, have you tried with the old IDE? (And without suspend at that...) > > > yes yes old IDE works ok, but the suspend functionality is broken.... so, as i compile scsi subsystem for usb-storage i wanted to move to the new libata, but i found this issue... Patrizio ^ permalink raw reply [flat|nested] 5+ messages in thread
* Re: libata not working for sis5533 2007-09-12 18:49 ` Patrizio Bassi @ 2007-09-12 20:01 ` Jan Engelhardt 2007-09-12 20:44 ` Bartlomiej Zolnierkiewicz 1 sibling, 0 replies; 5+ messages in thread From: Jan Engelhardt @ 2007-09-12 20:01 UTC (permalink / raw) To: Patrizio Bassi Cc: Andrew Morton, Alan Cox, Michal Piotrowski, Kernel,, IDE/ATA development list, Alan Cox, Bartlomiej Zolnierkiewicz, Andi Kleen, linux-acpi On Sep 12 2007 20:49, Patrizio Bassi wrote: >>>> >>> Looks more like a platform irq routing issue than an ata issue. >>> >>> Perhaps an x86 or an acpi person can help out with this. >> >> Patrizio, have you tried with the old IDE? (And without suspend at that...) > >yes yes old IDE works ok, but the suspend functionality is broken.... Well, that is a starting point. Now it is time for some ide dev :) Jan -- ^ permalink raw reply [flat|nested] 5+ messages in thread
* Re: libata not working for sis5533 2007-09-12 18:49 ` Patrizio Bassi 2007-09-12 20:01 ` Jan Engelhardt @ 2007-09-12 20:44 ` Bartlomiej Zolnierkiewicz 1 sibling, 0 replies; 5+ messages in thread From: Bartlomiej Zolnierkiewicz @ 2007-09-12 20:44 UTC (permalink / raw) To: patrizio.bassi Cc: Jan Engelhardt, Andrew Morton, Alan Cox, Michal Piotrowski, Kernel,, IDE/ATA development list, Alan Cox, Andi Kleen, linux-acpi Hi, On Wednesday 12 September 2007, Patrizio Bassi wrote: > Jan Engelhardt ha scritto: > > On Sep 11 2007 15:46, Andrew Morton wrote: > > > >> Patrizio Bassi <patrizio.bassi@gmail.com> wrote: > >> > >>> Jan Engelhardt ha scritto: > >>> > >>>> On Sep 8 2007 11:38, Patrizio Bassi wrote: > >>>> > >>>>> Jan Engelhardt wrote: > >>>>> > >>>>> > >>>>>> I shall give this a spin too, since I happen to have sis5513. Just > >>>>>> booted this fresh ata-enabled system (a matter of mkinitrd). It has not > >>>>>> exploded yet. > >>>>>> > >>>>>> > >>>>> don't you have the "irq 14" issue? > >>>>> > >>>>> > >>>> No, does not seem so. > >>>> > >>> For Alan, libata devs...hope can help debug... > >>> this is http://www.patriziobassi.it/downloads/libata_issue.jpg > >>> > >> Looks more like a platform irq routing issue than an ata issue. > >> > >> Perhaps an x86 or an acpi person can help out with this. > >> > > > > Patrizio, have you tried with the old IDE? (And without suspend at that...) > > > > > > > > yes yes old IDE works ok, but the suspend functionality is broken.... > so, as i compile scsi subsystem for usb-storage i wanted to move to the > new libata, but i found this issue... w.r.t. to suspend problem (http://bugzilla.kernel.org/show_bug.cgi?id=7077): please try latest -mm kernel, it contains many fixes for sis5513 host driver. Thanks, Bart ^ permalink raw reply [flat|nested] 5+ messages in thread
end of thread, other threads:[~2007-09-12 20:44 UTC | newest]
Thread overview: 5+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
[not found] <46D132C5.5000803@gmail.com>
[not found] ` <6bffcb0e0708261627s12e5a9acqef92d0261264a40c@mail.gmail.com>
[not found] ` <46D8921E.3010304@gmail.com>
[not found] ` <46D89429.7080802@gmail.com>
[not found] ` <20070902114032.7dbfb21a@the-village.bc.nu>
[not found] ` <Pine.LNX.4.64.0709031957390.24179@fbirervta.pbzchgretzou.qr>
[not found] ` <Pine.LNX.4.64.0709061156220.25942@fbirervta.pbzchgretzou.qr>
[not found] ` <46E26DAF.9020906@gmail.com>
[not found] ` <Pine.LNX.4.64.0709081243050.25942@fbirervta.pbzchgretzou.qr>
[not found] ` <46E3DA7E.7060709@gmail.com>
2007-09-11 22:46 ` libata not working for sis5533 Andrew Morton
2007-09-12 18:21 ` Jan Engelhardt
2007-09-12 18:49 ` Patrizio Bassi
2007-09-12 20:01 ` Jan Engelhardt
2007-09-12 20:44 ` Bartlomiej Zolnierkiewicz
This is a public inbox, see mirroring instructions for how to clone and mirror all data and code used for this inbox; as well as URLs for NNTP newsgroup(s).