* IT SAID " Please send dmidecode to linux-acpi@vger.kernel.org" ...
@ 2007-11-17 18:06 W. Conrad GP
2008-01-18 22:18 ` Len Brown
0 siblings, 1 reply; 3+ messages in thread
From: W. Conrad GP @ 2007-11-17 18:06 UTC (permalink / raw)
To: linux-acpi
in /var/log/messages.
The output is appended below.
==
root@conport:/home/coney# dmidecode
# dmidecode 2.9
SMBIOS 2.4 present.
20 structures occupying 803 bytes.
Table at 0x37EE3000.
Handle 0x0000, DMI type 0, 24 bytes
BIOS Information
Vendor: Phoenix Technologies LTD
Version: 1.00
Release Date: 08/27/2007
Address: 0xE3D70
Runtime Size: 115344 bytes
ROM Size: 1024 kB
Characteristics:
PCI is supported
PNP is supported
BIOS is upgradeable
BIOS shadowing is allowed
ESCD support is available
Boot from CD is supported
Selectable boot is supported
BIOS ROM is socketed
EDD is supported
5.25"/360 KB floppy services are supported (int 13h)
5.25"/1.2 MB floppy services are supported (int 13h)
3.5"/720 KB floppy services are supported (int 13h)
Print screen service is supported (int 5h)
8042 keyboard services are supported (int 9h)
Serial services are supported (int 14h)
Printer services are supported (int 17h)
CGA/mono video services are supported (int 10h)
ACPI is supported
USB legacy is supported
LS-120 boot is supported
ATAPI Zip drive boot is supported
BIOS boot specification is supported
Targeted content distribution is supported
Handle 0x0001, DMI type 1, 27 bytes
System Information
Manufacturer: TOSHIBA
Product Name: Satellite A210
Version: PSAFGE-02600RGR
Serial Number: X7059827Q
UUID: 1E45BA00-71CE-11DC-A70E-00A0D185ABE3
Wake-up Type: Power Switch
SKU Number: Not Specified
Family: Not Specified
Handle 0x0002, DMI type 2, 8 bytes
Base Board Information
Manufacturer: ATI
Product Name: SB600
Version: Rev 1
Serial Number: None
Handle 0x0003, DMI type 3, 17 bytes
Chassis Information
Manufacturer: AMD
Type: Other
Lock: Not Present
Version: None
Serial Number: None
Asset Tag: No Asset Tag
Boot-up State: Safe
Power Supply State: Safe
Thermal State: Safe
Security Status: None
OEM Information: 0x00000000
Handle 0x0004, DMI type 4, 35 bytes
Processor Information
Socket Designation: Socket M2/S1G1
Type: Central Processor
Family: Opteron
Manufacturer: AMD
ID: 81 0F 06 00 FF FB 8B 17
Signature: Family 15, Model 104, Stepping 1
Flags:
FPU (Floating-point unit on-chip)
VME (Virtual mode extension)
DE (Debugging extension)
PSE (Page size extension)
TSC (Time stamp counter)
MSR (Model specific registers)
PAE (Physical address extension)
MCE (Machine check exception)
CX8 (CMPXCHG8 instruction supported)
APIC (On-chip APIC hardware supported)
SEP (Fast system call)
MTRR (Memory type range registers)
PGE (Page global enable)
MCA (Machine check architecture)
CMOV (Conditional move instruction supported)
PAT (Page attribute table)
PSE-36 (36-bit page size extension)
CLFSH (CLFLUSH instruction supported)
MMX (MMX technology supported)
FXSR (Fast floating-point save and restore)
SSE (Streaming SIMD extensions)
SSE2 (Streaming SIMD extensions 2)
HTT (Hyper-threading technology)
Version: Engineering Samplenology
Voltage: 1.4 V
External Clock: 200 MHz
Max Speed: 4000 MHz
Current Speed: 1800 MHz
Status: Populated, Enabled
Upgrade: Other
L1 Cache Handle: 0x0005
L2 Cache Handle: 0x0006
L3 Cache Handle: Not Provided
Serial Number: Not Specified
Asset Tag: Not Specified
Part Number: Not Specified
Handle 0x0005, DMI type 7, 19 bytes
Cache Information
Socket Designation: L1 Cache
Configuration: Enabled, Not Socketed, Level 1
Operational Mode: Write Back
Location: Internal
Installed Size: 64 KB
Maximum Size: 64 KB
Supported SRAM Types:
Burst
Pipeline Burst
Asynchronous
Installed SRAM Type: Asynchronous
Speed: Unknown
Error Correction Type: Unknown
System Type: Unknown
Associativity: Unknown
Handle 0x0006, DMI type 7, 19 bytes
Cache Information
Socket Designation: H0 L2 Cache
Configuration: Enabled, Not Socketed, Level 2
Operational Mode: Write Through
Location: Internal
Installed Size: 512 KB
Maximum Size: 1024 KB
Supported SRAM Types:
Burst
Pipeline Burst
Synchronous
Installed SRAM Type: Synchronous
Speed: Unknown
Error Correction Type: Unknown
System Type: Unified
Associativity: Unknown
Handle 0x0007, DMI type 9, 13 bytes
System Slot Information
Designation: PCI1
Type: 32-bit PCI
Current Usage: Unknown
Length: Long
ID: 0
Characteristics:
5.0 V is provided
3.3 V is provided
PME signal is supported
Handle 0x0008, DMI type 9, 13 bytes
System Slot Information
Designation: PCI2
Type: 32-bit PCI
Current Usage: Available
Length: Long
ID: 2
Characteristics:
5.0 V is provided
3.3 V is provided
PME signal is supported
Handle 0x0009, DMI type 11, 5 bytes
OEM Strings
String 1: SSAFGE02600RGR
String 2:
String 3:
String 4:
String 5:
Handle 0x000A, DMI type 12, 5 bytes
System Configuration Options
Option 1: NVR:00707002
Option 2: DSN:5LZ5M77Z
Option 3: DSN:TMS1GS264C082665AP00000000
Option 4: DSN:7BC50786
Handle 0x000B, DMI type 16, 15 bytes
Physical Memory Array
Location: System Board Or Motherboard
Use: System Memory
Error Correction Type: None
Maximum Capacity: 2 GB
Error Information Handle: Not Provided
Number Of Devices: 2
Handle 0x000C, DMI type 17, 27 bytes
Memory Device
Array Handle: 0x000B
Error Information Handle: No Error
Total Width: 128 bits
Data Width: 64 bits
Size: 1024 MB
Form Factor: DIMM
Set: 1
Locator: S1
Bank Locator: DIMM1
Type: DDR2
Type Detail: Synchronous
Speed: 667 MHz (1.5 ns)
Manufacturer: Not Specified
Serial Number: Not Specified
Asset Tag: Not Specified
Part Number: Not Specified
Handle 0x000D, DMI type 17, 27 bytes
Memory Device
Array Handle: 0x000B
Error Information Handle: No Error
Total Width: Unknown
Data Width: Unknown
Size: No Module Installed
Form Factor: DIMM
Set: 2
Locator: S2
Bank Locator: DIMM2
Type: DDR2
Type Detail: Unknown
Speed: Unknown
Manufacturer: Not Specified
Serial Number: Not Specified
Asset Tag: Not Specified
Part Number: Not Specified
Handle 0x000E, DMI type 18, 23 bytes
32-bit Memory Error Information
Type: OK
Granularity: Unknown
Operation: Unknown
Vendor Syndrome: Unknown
Memory Array Address: Unknown
Device Address: Unknown
Resolution: Unknown
Handle 0x000F, DMI type 19, 15 bytes
Memory Array Mapped Address
Starting Address: 0x00000000000
Ending Address: 0x0003FFFFFFF
Range Size: 1 GB
Physical Array Handle: 0x000B
Partition Width: 0
Handle 0x0010, DMI type 20, 19 bytes
Memory Device Mapped Address
Starting Address: 0x00000000000
Ending Address: 0x0003FFFFFFF
Range Size: 1 GB
Physical Device Handle: 0x000C
Memory Array Mapped Address Handle: 0x000F
Partition Row Position: 2
Interleave Position: 1
Interleaved Data Depth: 6
Handle 0x0011, DMI type 32, 20 bytes
System Boot Information
Status: <OUT OF SPEC>
Handle 0x0012, DMI type 150, 14 bytes
OEM-specific Type
Header and Data:
96 0E 12 00 01 01 00 00 00 00 00 00 00 00
Strings:
ABSOLUTE(PHOENIX) CLM
Handle 0x0013, DMI type 127, 4 bytes
End Of Table
root@conport:/home/coney#
^ permalink raw reply [flat|nested] 3+ messages in thread
* Re: IT SAID " Please send dmidecode to linux-acpi@vger.kernel.org" ...
2007-11-17 18:06 IT SAID " Please send dmidecode to linux-acpi@vger.kernel.org" W. Conrad GP
@ 2008-01-18 22:18 ` Len Brown
[not found] ` <4791DCB2.6010802@praxisarzt.de>
0 siblings, 1 reply; 3+ messages in thread
From: Len Brown @ 2008-01-18 22:18 UTC (permalink / raw)
To: W. Conrad GP; +Cc: linux-acpi
On Saturday 17 November 2007 13:06, W. Conrad GP wrote:
> Manufacturer: TOSHIBA
> Product Name: Satellite A210
With 2.6.22, did you notice any functional difference with "acpi_osi=!Linux"?
(or since the default changed at 2.6.23, with 2.6.23 or later
do you notice any difference with "acpi_osi=Linux"?)
Please send me the output from acpidump.
If you don't have acpidump, you can get it from pmtools here:
http://www.lesswatts.org/projects/acpi/utilities.php
thanks,
-Len
-
To unsubscribe from this list: send the line "unsubscribe linux-acpi" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
^ permalink raw reply [flat|nested] 3+ messages in thread
* Re: IT SAID " Please send dmidecode to linux-acpi@vger.kernel.org" ... - Toshiba Satellite A210
[not found] ` <4791DCB2.6010802@praxisarzt.de>
@ 2008-01-20 19:50 ` Len Brown
0 siblings, 0 replies; 3+ messages in thread
From: Len Brown @ 2008-01-20 19:50 UTC (permalink / raw)
To: W. Conrad GP; +Cc: linux-acpi
On Saturday 19 January 2008 06:19, W. Conrad GP wrote:
> Dear Len,
>
>
> I remember sending this mail because an error message popped up and
> asked me to do so but I am at loss what it was all about since so many
> things happend since then and everything has been up to my satisfaction
> with Ubuntu Gutsy Gibbon on this notebook.
>
>
> In order to answer the question "With 2.6.22, did you notice any
> functional difference with "acpi_osi=!Linux"?" you would have to tell me
> where this parameter was set. Sorry.
>
>
> The acpi dumps the following on a
>
>
> Linux conport 2.6.23-coney #1 SMP Sat Nov 17 15:48:15 CET 2007 x86_64
> GNU/Linux
>
>
> ( ... a lot of boring data following a hope it's of help,
> if there is anything else I can do, instruct me.
>
>
I'm glad to hear that 2.6.23 is working well for you.
With kernel 2.6.23 or later, please append "acpi_osi=Linux" to the boot command line
to see if that has any change with and without.
Others Toshiba models had sound issues with acpi_osi=Linux,
so you might confirm that works in both cases.
Your box may potentially have an issue with SATA power states --
which you might notice when you suspend or hibernate.
(below)
thanks,
-Len
>
> > On Saturday 17 November 2007 13:06, W. Conrad GP wrote:
> >
> >> Manufacturer: TOSHIBA
> >> Product Name: Satellite A210
> >>
> >
> > With 2.6.22, did you notice any functional difference with "acpi_osi=!Linux"?
> >
> > (or since the default changed at 2.6.23, with 2.6.23 or later
> > do you notice any difference with "acpi_osi=Linux"?)
> >
thanks for the acpidump output.
Name (LINX, 0x00)
Name (OSTB, Ones)
OperationRegion (OSTY, SystemMemory, 0x37E83F04, 0x00000001)
Field (OSTY, AnyAcc, NoLock, Preserve)
{
TPOS, 8
}
Method (OSTP, 0, NotSerialized)
{
If (LEqual (^OSTB, Ones))
{
If (CondRefOf (\_OSI, Local0))
{
Store (0x00, ^OSTB)
Store (0x00, ^TPOS)
...
If (\_OSI ("Linux"))
{
Store (0x01, LINX)
Store (0x80, ^OSTB)
Store (0x80, ^TPOS)
}
...
Return (^OSTB)
}
LINX is set, but not referenced.
OSTB is compared to 4 only, (win NT or later)
TPOS is compared to 0x40 later (Vista) in the SATA wakeup ASL
so OSI(Linux) will change that.
Method (_PS0, 0, NotSerialized)
{
If (LEqual (TPOS, 0x40))
{
Store (0x32, Local0)
While (LAnd (LEqual (\_SB.PCI0.SATA.PMBY, 0x01), Local0))
{
Sleep (0xFA)
Decrement (Local0)
}
}
Store (0x00, PRIS)
}
OSTP() is invoked in various places, but its return value is never checked.
^ permalink raw reply [flat|nested] 3+ messages in thread
end of thread, other threads:[~2008-01-20 19:51 UTC | newest]
Thread overview: 3+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2007-11-17 18:06 IT SAID " Please send dmidecode to linux-acpi@vger.kernel.org" W. Conrad GP
2008-01-18 22:18 ` Len Brown
[not found] ` <4791DCB2.6010802@praxisarzt.de>
2008-01-20 19:50 ` IT SAID " Please send dmidecode to linux-acpi@vger.kernel.org" ... - Toshiba Satellite A210 Len Brown
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox