* AE_ERROR, ACPI thermal trip point state changed [not found] <47B328AA.1000800@freemail.hu> @ 2008-02-14 7:44 ` Németh Márton 2008-03-06 7:01 ` Németh Márton 0 siblings, 1 reply; 18+ messages in thread From: Németh Márton @ 2008-02-14 7:44 UTC (permalink / raw) To: linux-acpi [-- Attachment #1: Type: text/plain, Size: 278 bytes --] Hi, I get the following message from the kernel 2.6.25-rc1 on Clevo D410J laptop: ACPI Exception (thermal-0514): AE_ERROR, ACPI thermal trip point state changed Please send acpidump to linux-acpi@vger.kernel.org [20070126] So I am writing this email to you. Márton Németh [-- Attachment #2: dmesg-2.6.25-rc1.txt.gz --] [-- Type: application/gzip, Size: 7757 bytes --] [-- Attachment #3: acpidump-Clevo-D410J.txt.gz --] [-- Type: application/gzip, Size: 21112 bytes --] ^ permalink raw reply [flat|nested] 18+ messages in thread
* Re: AE_ERROR, ACPI thermal trip point state changed 2008-02-14 7:44 ` AE_ERROR, ACPI thermal trip point state changed Németh Márton @ 2008-03-06 7:01 ` Németh Márton 2008-03-05 22:49 ` Zhang, Rui 0 siblings, 1 reply; 18+ messages in thread From: Németh Márton @ 2008-03-06 7:01 UTC (permalink / raw) To: linux-acpi; +Cc: LKML [-- Attachment #1: Type: text/plain, Size: 627 bytes --] Hi, in my dmesg the following lines appear with linux-2.6.25-rc4 on Clevo D410J laptop: ACPI Exception (thermal-0514): AE_ERROR, ACPI thermal trip point state changed Please send acpidump to linux-acpi@vger.kernel.org [20070126] Should I do something else than sending the acpidump? Márton Németh Németh Márton wrote: > Hi, > > I get the following message from the kernel 2.6.25-rc1 on Clevo D410J laptop: > > ACPI Exception (thermal-0514): AE_ERROR, ACPI thermal trip point state changed > Please send acpidump to linux-acpi@vger.kernel.org > [20070126] > > So I am writing this email to you. > > Márton Németh [-- Attachment #2: dmesg-2.6.25-rc4.txt --] [-- Type: text/plain, Size: 24161 bytes --] Linux version 2.6.25-rc4 (nmarci@europa) (gcc version 4.2.3 20080114 (prerelease) (Debian 4.2.2-7)) #1 PREEMPT Wed Mar 5 21:34:08 CET 2008 BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000009f800 (usable) BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved) BIOS-e820: 00000000000d8000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 000000003bf70000 (usable) BIOS-e820: 000000003bf70000 - 000000003bf7a000 (ACPI data) BIOS-e820: 000000003bf7a000 - 000000003bf80000 (ACPI NVS) BIOS-e820: 000000003bf80000 - 0000000040000000 (reserved) BIOS-e820: 00000000fffe0000 - 0000000100000000 (reserved) 63MB HIGHMEM available. 896MB LOWMEM available. Scan SMP from c0000000 for 1024 bytes. Scan SMP from c009fc00 for 1024 bytes. Scan SMP from c00f0000 for 65536 bytes. found SMP MP-table at [c00f6870] 000f6870 Entering add_active_range(0, 0, 245616) 0 entries of 256 used Zone PFN ranges: DMA 0 -> 4096 Normal 4096 -> 229376 HighMem 229376 -> 245616 Movable zone start PFN for each node early_node_map[1] active PFN ranges 0: 0 -> 245616 On node 0 totalpages: 245616 DMA zone: 32 pages used for memmap DMA zone: 0 pages reserved DMA zone: 4064 pages, LIFO batch:0 Normal zone: 1760 pages used for memmap Normal zone: 223520 pages, LIFO batch:31 HighMem zone: 126 pages used for memmap HighMem zone: 16114 pages, LIFO batch:3 Movable zone: 0 pages used for memmap DMI present. ACPI: RSDP 000F68D0, 0014 (r0 PTLTD ) ACPI: RSDT 3BF7600B, 0030 (r1 PTLTD RSDT 6040000 LTP 0) ACPI: FACP 3BF79E87, 0074 (r1 AMDK8 PTLTW 6040000 PTL_ F4240) ACPI: DSDT 3BF7603B, 3E4C (r1 VIA PTL_ACPI 6040000 MSFT 100000E) ACPI: FACS 3BF7AFC0, 0040 ACPI: SSDT 3BF79EFB, 00B5 (r1 PTLTD POWERNOW 6040000 LTP 1) ACPI: APIC 3BF79FB0, 0050 (r1 PTLTD APIC 6040000 LTP 0) ACPI: PM-Timer IO Port: 0x4008 ACPI: Local APIC address 0xfee00000 ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) Processor #0 15:12 APIC version 16 ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0]) IOAPIC[0]: apic_id 1, version 3, address 0xfec00000, GSI 0-23 ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 high edge) ACPI: IRQ0 used by override. ACPI: IRQ2 used by override. ACPI: IRQ10 used by override. Enabling APIC mode: Flat. Using 1 I/O APICs Using ACPI (MADT) for SMP configuration information Allocating PCI resources starting at 50000000 (gap: 40000000:bffe0000) PM: Registered nosave memory: 000000000009f000 - 00000000000a0000 PM: Registered nosave memory: 00000000000a0000 - 00000000000d8000 PM: Registered nosave memory: 00000000000d8000 - 0000000000100000 Built 1 zonelists in Zone order, mobility grouping on. Total pages: 243698 Kernel command line: root=/dev/hda3 ro log_buf_len=1M resume=/dev/hda2 log_buf_len: 1048576 mapped APIC to ffffb000 (fee00000) mapped IOAPIC to ffffa000 (fec00000) Enabling fast FPU save and restore... done. Enabling unmasked SIMD FPU exception support... done. Initializing CPU#0 PID hash table entries: 4096 (order: 12, 16384 bytes) Detected 1603.695 MHz processor. Console: colour VGA+ 80x25 console [tty0] enabled Lock dependency validator: Copyright (c) 2006 Red Hat, Inc., Ingo Molnar ... MAX_LOCKDEP_SUBCLASSES: 8 ... MAX_LOCK_DEPTH: 48 ... MAX_LOCKDEP_KEYS: 2048 ... CLASSHASH_SIZE: 1024 ... MAX_LOCKDEP_ENTRIES: 8192 ... MAX_LOCKDEP_CHAINS: 16384 ... CHAINHASH_SIZE: 8192 memory used by lock dependency info: 992 kB per task-struct memory footprint: 1920 bytes ------------------------ | Locking API testsuite: ---------------------------------------------------------------------------- | spin |wlock |rlock |mutex | wsem | rsem | -------------------------------------------------------------------------- A-A deadlock: ok | ok | ok | ok | ok | ok | A-B-B-A deadlock: ok | ok | ok | ok | ok | ok | A-B-B-C-C-A deadlock: ok | ok | ok | ok | ok | ok | A-B-C-A-B-C deadlock: ok | ok | ok | ok | ok | ok | A-B-B-C-C-D-D-A deadlock: ok | ok | ok | ok | ok | ok | A-B-C-D-B-D-D-A deadlock: ok | ok | ok | ok | ok | ok | A-B-C-D-B-C-D-A deadlock: ok | ok | ok | ok | ok | ok | double unlock: ok | ok | ok | ok | ok | ok | initialize held: ok | ok | ok | ok | ok | ok | bad unlock order: ok | ok | ok | ok | ok | ok | -------------------------------------------------------------------------- recursive read-lock: | ok | | ok | recursive read-lock #2: | ok | | ok | mixed read-write-lock: | ok | | ok | mixed write-read-lock: | ok | | ok | -------------------------------------------------------------------------- hard-irqs-on + irq-safe-A/12: ok | ok | ok | soft-irqs-on + irq-safe-A/12: ok | ok | ok | hard-irqs-on + irq-safe-A/21: ok | ok | ok | soft-irqs-on + irq-safe-A/21: ok | ok | ok | sirq-safe-A => hirqs-on/12: ok | ok | ok | sirq-safe-A => hirqs-on/21: ok | ok | ok | hard-safe-A + irqs-on/12: ok | ok | ok | soft-safe-A + irqs-on/12: ok | ok | ok | hard-safe-A + irqs-on/21: ok | ok | ok | soft-safe-A + irqs-on/21: ok | ok | ok | hard-safe-A + unsafe-B #1/123: ok | ok | ok | soft-safe-A + unsafe-B #1/123: ok | ok | ok | hard-safe-A + unsafe-B #1/132: ok | ok | ok | soft-safe-A + unsafe-B #1/132: ok | ok | ok | hard-safe-A + unsafe-B #1/213: ok | ok | ok | soft-safe-A + unsafe-B #1/213: ok | ok | ok | hard-safe-A + unsafe-B #1/231: ok | ok | ok | soft-safe-A + unsafe-B #1/231: ok | ok | ok | hard-safe-A + unsafe-B #1/312: ok | ok | ok | soft-safe-A + unsafe-B #1/312: ok | ok | ok | hard-safe-A + unsafe-B #1/321: ok | ok | ok | soft-safe-A + unsafe-B #1/321: ok | ok | ok | hard-safe-A + unsafe-B #2/123: ok | ok | ok | soft-safe-A + unsafe-B #2/123: ok | ok | ok | hard-safe-A + unsafe-B #2/132: ok | ok | ok | soft-safe-A + unsafe-B #2/132: ok | ok | ok | hard-safe-A + unsafe-B #2/213: ok | ok | ok | soft-safe-A + unsafe-B #2/213: ok | ok | ok | hard-safe-A + unsafe-B #2/231: ok | ok | ok | soft-safe-A + unsafe-B #2/231: ok | ok | ok | hard-safe-A + unsafe-B #2/312: ok | ok | ok | soft-safe-A + unsafe-B #2/312: ok | ok | ok | hard-safe-A + unsafe-B #2/321: ok | ok | ok | soft-safe-A + unsafe-B #2/321: ok | ok | ok | hard-irq lock-inversion/123: ok | ok | ok | soft-irq lock-inversion/123: ok | ok | ok | hard-irq lock-inversion/132: ok | ok | ok | soft-irq lock-inversion/132: ok | ok | ok | hard-irq lock-inversion/213: ok | ok | ok | soft-irq lock-inversion/213: ok | ok | ok | hard-irq lock-inversion/231: ok | ok | ok | soft-irq lock-inversion/231: ok | ok | ok | hard-irq lock-inversion/312: ok | ok | ok | soft-irq lock-inversion/312: ok | ok | ok | hard-irq lock-inversion/321: ok | ok | ok | soft-irq lock-inversion/321: ok | ok | ok | hard-irq read-recursion/123: ok | soft-irq read-recursion/123: ok | hard-irq read-recursion/132: ok | soft-irq read-recursion/132: ok | hard-irq read-recursion/213: ok | soft-irq read-recursion/213: ok | hard-irq read-recursion/231: ok | soft-irq read-recursion/231: ok | hard-irq read-recursion/312: ok | soft-irq read-recursion/312: ok | hard-irq read-recursion/321: ok | soft-irq read-recursion/321: ok | ------------------------------------------------------- Good, all 218 testcases passed! | --------------------------------- Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) Memory: 966876k/982464k available (2071k kernel code, 15072k reserved, 891k data, 272k init, 64960k highmem) virtual kernel memory layout: fixmap : 0xfffa8000 - 0xfffff000 ( 348 kB) pkmap : 0xff800000 - 0xffc00000 (4096 kB) vmalloc : 0xf8800000 - 0xff7fe000 ( 111 MB) lowmem : 0xc0000000 - 0xf8000000 ( 896 MB) .init : 0xc03e8000 - 0xc042c000 ( 272 kB) .data : 0xc0305c2b - 0xc03e4c18 ( 891 kB) .text : 0xc0100000 - 0xc0305c2b (2071 kB) Checking if this processor honours the WP bit even in supervisor mode...Ok. CPA: page pool initialized 1 of 1 pages preallocated Calibrating delay using timer specific routine.. 3210.53 BogoMIPS (lpj=1605269) Mount-cache hash table entries: 512 CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) CPU: L2 Cache: 128K (64 bytes/line) Intel machine check architecture supported. Intel machine check reporting enabled on CPU#0. Compat vDSO mapped to ffffe000. CPU: AMD Mobile AMD Sempron(tm) Processor 2600+ stepping 00 Checking 'hlt' instruction... OK. Freeing SMP alternatives: 0k freed ACPI: Core revision 20070126 Parsing all Control Methods: Table [DSDT](id 0001) - 480 Objects with 49 Devices 147 Methods 13 Regions Parsing all Control Methods: Table [SSDT](id 0002) - 3 Objects with 0 Devices 0 Methods 0 Regions tbxface-0598 [00] tb_load_namespace : ACPI Tables successfully acquired evxfevnt-0091 [00] enable : Transition to ACPI mode successful ENABLING IO-APIC IRQs ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=0 pin2=0 net_namespace: 604 bytes NET: Registered protocol family 16 EISA bus registered ACPI: bus type pci registered PCI: PCI BIOS revision 2.10 entry at 0xfd88c, last bus=1 PCI: Using configuration type 1 Setting up standard PCI resources evgpeblk-0956 [00] ev_create_gpe_block : GPE 00 to 0F [_GPE] 2 regs on int 0xA evgpeblk-1052 [00] ev_initialize_gpe_bloc: Found 4 Wake, Enabled 0 Runtime GPEs in this block ACPI: EC: Look up EC in DSDT Completing Region/Field/Buffer/Package initialization:..................................................... Initialized 11/13 Regions 1/1 Fields 23/24 Buffers 18/26 Packages (492 nodes) Initializing Device/Processor/Thermal objects by executing _INI methods:. Executed 1 _INI methods requiring 1 _STA executions (examined 53 objects) ACPI: Interpreter enabled ACPI: (supports S0 S3 S4 S5) ACPI: Using IOAPIC for interrupt routing ACPI: EC: non-query interrupt received, switching to interrupt mode ACPI: EC: missing write data confirmation, don't expect it any longer. ACPI: EC: GPE = 0xb, I/O: command/status = 0x66, data = 0x62 ACPI: EC: driver started in interrupt mode ACPI: PCI Root Bridge [PCI0] (0000:00) pci 0000:00:11.0: quirk: region 4000-407f claimed by vt8235 PM pci 0000:00:11.0: quirk: region 8100-810f claimed by vt8235 SMB ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] ACPI: PCI Interrupt Link [ALKA] (IRQs 16 17 18 19 20 21 22 23) *9, disabled. ACPI: PCI Interrupt Link [ALKB] (IRQs 16 17 18 19 20 21 22 23) *11, disabled. ACPI: PCI Interrupt Link [ALKC] (IRQs 22) *10, disabled. ACPI: PCI Interrupt Link [ALKD] (IRQs 21) *5, disabled. ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 7 *9 12 14 15) ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 7 10 12 14 15) *11 ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 7 11 12 14 15) *10 ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 *5 7 9 10 11 12 14 15) Linux Plug and Play Support v0.97 (c) Adam Belay pnp: PnP ACPI init ACPI: bus type pnp registered pnp 00:00: Plug and Play ACPI device, IDs PNP0a03 (active) pnp 00:01: Plug and Play ACPI device, IDs PNP0200 (active) pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active) pnp 00:03: Plug and Play ACPI device, IDs PNP0c04 (active) pnp 00:04: Plug and Play ACPI device, IDs PNP0800 (active) 00:05: calling quirk 0xc025ae70: quirk_supermicro_h8dce_system+0x0/0x110() pnp 00:05: Plug and Play ACPI device, IDs PNP0c01 (active) 00:06: calling quirk 0xc025ae70: quirk_supermicro_h8dce_system+0x0/0x110() pnp 00:06: Plug and Play ACPI device, IDs PNP0c02 (active) pnp 00:07: Plug and Play ACPI device, IDs PNP0f13 (active) pnp 00:08: Plug and Play ACPI device, IDs PNP0303 (active) pnp 00:09: Plug and Play ACPI device, IDs PNP0501 (active) pnp 00:0a: Plug and Play ACPI device, IDs PNP0401 (active) pnp: PnP ACPI: found 11 devices ACPI: ACPI bus type pnp unregistered PCI: Using ACPI for IRQ routing PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report pnp: the driver 'system' has been registered system 00:05: iomem range 0x0-0x9ffff could not be reserved system 00:05: iomem range 0xe0000-0xfffff could not be reserved system 00:05: iomem range 0xfff00000-0xffffffff could not be reserved system 00:05: iomem range 0xffee0000-0xffefffff has been reserved system 00:05: iomem range 0xfec00000-0xfec00fff has been reserved system 00:05: iomem range 0xfee00000-0xfee00fff has been reserved system 00:05: driver attached system 00:06: ioport range 0x4d0-0x4d1 has been reserved system 00:06: ioport range 0xfe10-0xfe11 has been reserved system 00:06: ioport range 0xfe00-0xfe00 has been reserved system 00:06: ioport range 0x4000-0x407f has been reserved system 00:06: ioport range 0x8100-0x811f could not be reserved Time: tsc clocksource has been installed. system 00:06: driver attached PCI: Bridge: 0000:00:01.0 IO window: disabled. MEM window: 0xd1000000-0xd1ffffff PREFETCH window: 0x00000000f0000000-0x00000000f3ffffff PCI: Bus 2, cardbus bridge: 0000:00:0c.0 IO window: 0x00002000-0x000020ff IO window: 0x00002400-0x000024ff PREFETCH window: 0x50000000-0x53ffffff MEM window: 0x54000000-0x57ffffff PCI: Setting latency timer of device 0000:00:01.0 to 64 PCI: Enabling device 0000:00:0c.0 (0000 -> 0003) ACPI: PCI Interrupt 0000:00:0c.0[A] -> GSI 16 (level, low) -> IRQ 16 PCI: Setting latency timer of device 0000:00:0c.0 to 64 NET: Registered protocol family 2 IP route cache hash table entries: 32768 (order: 5, 131072 bytes) TCP established hash table entries: 131072 (order: 8, 1048576 bytes) TCP bind hash table entries: 65536 (order: 9, 2097152 bytes) TCP: Hash tables configured (established 131072 bind 65536) TCP reno registered audit: initializing netlink socket (disabled) type=2000 audit(1204788516.711:1): initialized highmem bounce pool size: 64 pages io scheduler noop registered io scheduler cfq registered (default) PCI: VIA PCI bridge detected. Disabling DAC. pci 0000:01:00.0: Boot video device isapnp: Scanning for PnP cards... isapnp: No Plug & Play device found Uniform Multi-Platform E-IDE driver ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx VP_IDE: IDE controller (0x1106:0x0571 rev 0x06) at PCI slot 0000:00:11.1 ACPI: PCI Interrupt Link [ALKA] disabled and referenced, BIOS bug ACPI: PCI Interrupt Link [ALKA] BIOS reported IRQ 0, using IRQ 23 ACPI: PCI Interrupt Link [ALKA] enabled at IRQ 23 ACPI: PCI Interrupt 0000:00:11.1[A] -> Link [ALKA] -> GSI 23 (level, low) -> IRQ 23 VP_IDE: not 100% native mode: will probe irqs later VP_IDE: VIA vt8235 (rev 00) IDE UDMA133 controller on pci0000:00:11.1 ide0: BM-DMA at 0x1c60-0x1c67, BIOS settings: hda:DMA, hdb:PIO ide1: BM-DMA at 0x1c68-0x1c6f, BIOS settings: hdc:DMA, hdd:PIO Probing IDE interface ide0... Switched to high resolution mode on CPU 0 hdb: IRQ probe failed (0xfffffbfe) hdb: IRQ probe failed (0xfffffbfe) hda: SAMSUNG MP0804H, ATA DISK drive hda: host max PIO5 wanted PIO255(auto-tune) selected PIO4 hda: UDMA/100 mode selected Probing IDE interface ide1... hdc: Optiarc DVD RW AD-7543A, ATAPI CD/DVD-ROM drive hdc: host max PIO5 wanted PIO255(auto-tune) selected PIO4 hdc: UDMA/33 mode selected ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 ide1 at 0x170-0x177,0x376 on irq 15 pnp: the driver 'ide' has been registered hda: max request size: 512KiB hda: 156368016 sectors (80060 MB) w/8192KiB Cache, CHS=16383/255/63 hda: cache flushes supported hda: hda1 hda2 hda3 TCP cubic registered NET: Registered protocol family 1 NET: Registered protocol family 17 Using IPI Shortcut mode ReiserFS: hda3: found reiserfs format "3.6" with standard journal ReiserFS: hda3: using ordered data mode ReiserFS: hda3: journal params: device hda3, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30 ReiserFS: hda3: checking transaction log (hda3) ReiserFS: hda3: Using r5 hash to sort names VFS: Mounted root (reiserfs filesystem) readonly. Freeing unused kernel memory: 272k freed Write protecting the kernel read-only data: 732k ACPI: CPU0 (power states: C1[C1] C2[C2]) ACPI: ACPI0007:00 is registered as cooling_device0 input: Power Button (FF) as /class/input/input0 ACPI: Power Button (FF) [PWRF] input: Power Button (CM) as /class/input/input1 ACPI: Power Button (CM) [PWB] input: Sleep Button (CM) as /class/input/input2 ACPI: Sleep Button (CM) [SLPB] input: Lid Switch as /class/input/input3 ACPI: Lid Switch [LID] ACPI: LNXTHERM:01 is registered as thermal_zone0 ACPI: Thermal Zone [THRM] (14 C) ACPI: AC Adapter [AC] (on-line) ACPI: Battery Slot [BAT0] (battery present) Yenta: CardBus bridge found at 0000:00:0c.0 [1558:4702] Yenta: Using CSCINT to route CSC interrupts to PCI Yenta: Routing CardBus interrupts to PCI Yenta TI: socket 0000:00:0c.0, mfunc 0x00001002, devctl 0x44 8139too Fast Ethernet driver 0.9.28 hdc: ATAPI 24X DVD-ROM DVD-R-RAM CD-R/RW drive, 2048kB Cache Uniform CD-ROM driver Revision: 3.20 Yenta: ISA IRQ mask 0x0840, PCI irq 16 Socket status: 30000006 ACPI: PCI Interrupt 0000:00:08.0[A] -> GSI 19 (level, low) -> IRQ 19 eth0: RealTek RTL8139 at 0xf88fa000, 00:90:f5:3e:5a:ca, IRQ 19 eth0: Identified 8139 chip type 'RTL-8100B/8139D' Marking TSC unstable due to: possible TSC halt in C2. Time: acpi_pm clocksource has been installed. usbcore: registered new interface driver usbfs usbcore: registered new interface driver hub usbcore: registered new device driver usb input: PC Speaker as /class/input/input4 pnp: the driver 'parport_pc' has been registered parport_pc 00:0a: reported by Plug and Play ACPI parport0: PC-style at 0x378 (0x778), irq 7, dma 1 [PCSPP,TRISTATE,COMPAT,ECP,DMA] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing disabled serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A Real Time Clock Driver v1.12ac parport_pc 00:0a: driver attached USB Universal Host Controller Interface driver v3.0 ACPI: PCI Interrupt Link [ALKD] disabled and referenced, BIOS bug ACPI: PCI Interrupt Link [ALKD] BIOS reported IRQ 0, using IRQ 21 ACPI: PCI Interrupt Link [ALKD] enabled at IRQ 21 ACPI: PCI Interrupt 0000:00:10.0[A] -> Link [ALKD] -> GSI 21 (level, low) -> IRQ 21 uhci_hcd 0000:00:10.0: UHCI Host Controller uhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 1 uhci_hcd 0000:00:10.0: irq 21, io base 0x00001c00 usb usb1: configuration #1 chosen from 1 choice hub 1-0:1.0: USB hub found hub 1-0:1.0: 2 ports detected ACPI: PCI Interrupt 0000:00:10.1[B] -> Link [ALKD] -> GSI 21 (level, low) -> IRQ 21 uhci_hcd 0000:00:10.1: UHCI Host Controller uhci_hcd 0000:00:10.1: new USB bus registered, assigned bus number 2 uhci_hcd 0000:00:10.1: irq 21, io base 0x00001c20 usb usb2: configuration #1 chosen from 1 choice hub 2-0:1.0: USB hub found hub 2-0:1.0: 2 ports detected ACPI: PCI Interrupt 0000:00:10.2[C] -> Link [ALKD] -> GSI 21 (level, low) -> IRQ 21 uhci_hcd 0000:00:10.2: UHCI Host Controller uhci_hcd 0000:00:10.2: new USB bus registered, assigned bus number 3 uhci_hcd 0000:00:10.2: irq 21, io base 0x00001c40 usb usb3: configuration #1 chosen from 1 choice hub 3-0:1.0: USB hub found hub 3-0:1.0: 2 ports detected pnp: the driver 'serial' has been registered 00:09: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A serial 00:09: driver attached ACPI: PCI Interrupt 0000:00:10.3[D] -> Link [ALKD] -> GSI 21 (level, low) -> IRQ 21 ehci_hcd 0000:00:10.3: EHCI Host Controller ehci_hcd 0000:00:10.3: new USB bus registered, assigned bus number 4 ehci_hcd 0000:00:10.3: irq 21, io mem 0xd0004400 ehci_hcd 0000:00:10.3: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 usb usb4: configuration #1 chosen from 1 choice hub 4-0:1.0: USB hub found hub 4-0:1.0: 6 ports detected cs: IO port probe 0x100-0x4ff: clean. cs: IO port probe 0x800-0x8ff: clean. cs: IO port probe 0xc00-0xcff: clean. cs: IO port probe 0xa00-0xaff: clean. ACPI: PCI Interrupt Link [ALKC] disabled and referenced, BIOS bug ACPI: PCI Interrupt Link [ALKC] BIOS reported IRQ 0, using IRQ 22 ACPI: PCI Interrupt Link [ALKC] enabled at IRQ 22 ACPI: PCI Interrupt 0000:00:11.6[C] -> Link [ALKC] -> GSI 22 (level, low) -> IRQ 22 PCI: Setting latency timer of device 0000:00:11.6 to 64 ACPI: PCI Interrupt 0000:00:11.5[C] -> Link [ALKC] -> GSI 22 (level, low) -> IRQ 22 PCI: Setting latency timer of device 0000:00:11.5 to 64 Adding 1951888k swap on /dev/hda2. Priority:-1 extents:1 across:1951888k pnp: the driver 'i8042 kbd' has been registered i8042 kbd 00:08: driver attached pnp: the driver 'i8042 aux' has been registered i8042 aux 00:07: driver attached PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12 i8042.c: Detected active multiplexing controller, rev 1.1. serio: i8042 KBD port at 0x60,0x64 irq 1 serio: i8042 AUX0 port at 0x60,0x64 irq 12 serio: i8042 AUX1 port at 0x60,0x64 irq 12 serio: i8042 AUX2 port at 0x60,0x64 irq 12 serio: i8042 AUX3 port at 0x60,0x64 irq 12 input: AT Translated Set 2 keyboard as /class/input/input5 powernow-k8: Found 1 Mobile AMD Sempron(tm) Processor 2600+ processors (1 cpu cores) (version 2.20.00) powernow-k8: 0 : fid 0x8 (1600 MHz), vid 0x6 powernow-k8: 1 : fid 0x0 (800 MHz), vid 0x18 powernow-k8: ph2 null fid transition 0x8 input: PS/2 Mouse as /class/input/input6 input: AlpsPS/2 ALPS GlidePoint as /class/input/input7 mice: PS/2 mouse device common for all mice Linux agpgart interface v0.103 [drm] Initialized drm 1.1.0 20060810 ACPI: PCI Interrupt 0000:01:00.0[A] -> GSI 16 (level, low) -> IRQ 16 [drm] Initialized via 2.11.1 20070202 on minor 0 leds_clevo_mail: 'Clevo D410J' found Registered led device: clevo::mail ACPI Exception (thermal-0514): AE_ERROR, ACPI thermal trip point state changed Please send acpidump to linux-acpi@vger.kernel.org [20070126] ReiserFS: hda1: found reiserfs format "3.6" with standard journal ReiserFS: hda1: using ordered data mode ReiserFS: hda1: journal params: device hda1, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30 ReiserFS: hda1: checking transaction log (hda1) ReiserFS: hda1: Using r5 hash to sort names ip_tables: (C) 2000-2006 Netfilter Core Team eth0: link up, 100Mbps, full-duplex, lpa 0x41E1 NET: Registered protocol family 10 lp0: using parport0 (interrupt-driven). ppdev: user-space parallel port driver Clocksource tsc unstable (delta = -282353088 ns) eth0: no IPv6 routers present warning: `avahi-daemon' uses 32-bit capabilities (legacy support in use) irq 16: nobody cared (try booting with the "irqpoll" option) Pid: 0, comm: swapper Not tainted 2.6.25-rc4 #1 [<c0157227>] __report_bad_irq+0x27/0x90 [<c01574c6>] note_interrupt+0x236/0x270 [<c01568d3>] ? handle_IRQ_event+0x53/0x60 [<c0157b6a>] handle_fasteoi_irq+0x7a/0xd0 [<c0106174>] do_IRQ+0x44/0xa0 [<c0104c66>] common_interrupt+0x2e/0x34 [<c0301ac8>] ? _spin_unlock_irq+0x28/0x50 [<c0118974>] finish_task_switch+0x54/0xc0 [<c0118920>] ? finish_task_switch+0x0/0xc0 [<c02ff326>] schedule+0x2b6/0x470 [<f892fdae>] ? acpi_processor_idle+0x0/0x436 [processor] [<c0102b65>] cpu_idle+0xb5/0xd0 [<c02fa66c>] rest_init+0x5c/0x60 ======================= handlers: [<f8915830>] (yenta_interrupt+0x0/0xe0 [yenta_socket]) [<f8aee3f0>] (via_driver_irq_handler+0x0/0x1c0 [via]) Disabling IRQ #16 [-- Attachment #3: acpidump-Clevo-D410J.txt.gz --] [-- Type: application/gzip, Size: 21112 bytes --] ^ permalink raw reply [flat|nested] 18+ messages in thread
* Re: AE_ERROR, ACPI thermal trip point state changed 2008-03-06 7:01 ` Németh Márton @ 2008-03-05 22:49 ` Zhang, Rui 2008-03-06 8:05 ` Zhang, Rui 0 siblings, 1 reply; 18+ messages in thread From: Zhang, Rui @ 2008-03-05 22:49 UTC (permalink / raw) To: Németh Márton; +Cc: linux-acpi, LKML hi, Márton, Please re-send the acpidump using the latest pmtools at http://www.kernel.org/pub/linux/kernel/people/lenb/acpi/utils/ thanks, rui On Thu, 2008-03-06 at 08:01 +0100, Németh Márton wrote: > Hi, > > in my dmesg the following lines appear with linux-2.6.25-rc4 on Clevo D410J laptop: > > ACPI Exception (thermal-0514): AE_ERROR, ACPI thermal trip point state changed > Please send acpidump to linux-acpi@vger.kernel.org > [20070126] > > Should I do something else than sending the acpidump? > > Márton Németh > > > Németh Márton wrote: > > Hi, > > > > I get the following message from the kernel 2.6.25-rc1 on Clevo D410J laptop: > > > > ACPI Exception (thermal-0514): AE_ERROR, ACPI thermal trip point state changed > > Please send acpidump to linux-acpi@vger.kernel.org > > [20070126] > > > > So I am writing this email to you. > > > > Márton Németh > > plain text document attachment (dmesg-2.6.25-rc4.txt) > Linux version 2.6.25-rc4 (nmarci@europa) (gcc version 4.2.3 20080114 (prerelease) (Debian 4.2.2-7)) #1 PREEMPT Wed Mar 5 21:34:08 CET 2008 > BIOS-provided physical RAM map: > BIOS-e820: 0000000000000000 - 000000000009f800 (usable) > BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved) > BIOS-e820: 00000000000d8000 - 0000000000100000 (reserved) > BIOS-e820: 0000000000100000 - 000000003bf70000 (usable) > BIOS-e820: 000000003bf70000 - 000000003bf7a000 (ACPI data) > BIOS-e820: 000000003bf7a000 - 000000003bf80000 (ACPI NVS) > BIOS-e820: 000000003bf80000 - 0000000040000000 (reserved) > BIOS-e820: 00000000fffe0000 - 0000000100000000 (reserved) > 63MB HIGHMEM available. > 896MB LOWMEM available. > Scan SMP from c0000000 for 1024 bytes. > Scan SMP from c009fc00 for 1024 bytes. > Scan SMP from c00f0000 for 65536 bytes. > found SMP MP-table at [c00f6870] 000f6870 > Entering add_active_range(0, 0, 245616) 0 entries of 256 used > Zone PFN ranges: > DMA 0 -> 4096 > Normal 4096 -> 229376 > HighMem 229376 -> 245616 > Movable zone start PFN for each node > early_node_map[1] active PFN ranges > 0: 0 -> 245616 > On node 0 totalpages: 245616 > DMA zone: 32 pages used for memmap > DMA zone: 0 pages reserved > DMA zone: 4064 pages, LIFO batch:0 > Normal zone: 1760 pages used for memmap > Normal zone: 223520 pages, LIFO batch:31 > HighMem zone: 126 pages used for memmap > HighMem zone: 16114 pages, LIFO batch:3 > Movable zone: 0 pages used for memmap > DMI present. > ACPI: RSDP 000F68D0, 0014 (r0 PTLTD ) > ACPI: RSDT 3BF7600B, 0030 (r1 PTLTD RSDT 6040000 LTP 0) > ACPI: FACP 3BF79E87, 0074 (r1 AMDK8 PTLTW 6040000 PTL_ F4240) > ACPI: DSDT 3BF7603B, 3E4C (r1 VIA PTL_ACPI 6040000 MSFT 100000E) > ACPI: FACS 3BF7AFC0, 0040 > ACPI: SSDT 3BF79EFB, 00B5 (r1 PTLTD POWERNOW 6040000 LTP 1) > ACPI: APIC 3BF79FB0, 0050 (r1 PTLTD APIC 6040000 LTP 0) > ACPI: PM-Timer IO Port: 0x4008 > ACPI: Local APIC address 0xfee00000 > ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) > Processor #0 15:12 APIC version 16 > ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) > ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0]) > IOAPIC[0]: apic_id 1, version 3, address 0xfec00000, GSI 0-23 > ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 high edge) > ACPI: IRQ0 used by override. > ACPI: IRQ2 used by override. > ACPI: IRQ10 used by override. > Enabling APIC mode: Flat. Using 1 I/O APICs > Using ACPI (MADT) for SMP configuration information > Allocating PCI resources starting at 50000000 (gap: 40000000:bffe0000) > PM: Registered nosave memory: 000000000009f000 - 00000000000a0000 > PM: Registered nosave memory: 00000000000a0000 - 00000000000d8000 > PM: Registered nosave memory: 00000000000d8000 - 0000000000100000 > Built 1 zonelists in Zone order, mobility grouping on. Total pages: 243698 > Kernel command line: root=/dev/hda3 ro log_buf_len=1M resume=/dev/hda2 > log_buf_len: 1048576 > mapped APIC to ffffb000 (fee00000) > mapped IOAPIC to ffffa000 (fec00000) > Enabling fast FPU save and restore... done. > Enabling unmasked SIMD FPU exception support... done. > Initializing CPU#0 > PID hash table entries: 4096 (order: 12, 16384 bytes) > Detected 1603.695 MHz processor. > Console: colour VGA+ 80x25 > console [tty0] enabled > Lock dependency validator: Copyright (c) 2006 Red Hat, Inc., Ingo Molnar > ... MAX_LOCKDEP_SUBCLASSES: 8 > ... MAX_LOCK_DEPTH: 48 > ... MAX_LOCKDEP_KEYS: 2048 > ... CLASSHASH_SIZE: 1024 > ... MAX_LOCKDEP_ENTRIES: 8192 > ... MAX_LOCKDEP_CHAINS: 16384 > ... CHAINHASH_SIZE: 8192 > memory used by lock dependency info: 992 kB > per task-struct memory footprint: 1920 bytes > ------------------------ > | Locking API testsuite: > ---------------------------------------------------------------------------- > | spin |wlock |rlock |mutex | wsem | rsem | > -------------------------------------------------------------------------- > A-A deadlock: ok | ok | ok | ok | ok | ok | > A-B-B-A deadlock: ok | ok | ok | ok | ok | ok | > A-B-B-C-C-A deadlock: ok | ok | ok | ok | ok | ok | > A-B-C-A-B-C deadlock: ok | ok | ok | ok | ok | ok | > A-B-B-C-C-D-D-A deadlock: ok | ok | ok | ok | ok | ok | > A-B-C-D-B-D-D-A deadlock: ok | ok | ok | ok | ok | ok | > A-B-C-D-B-C-D-A deadlock: ok | ok | ok | ok | ok | ok | > double unlock: ok | ok | ok | ok | ok | ok | > initialize held: ok | ok | ok | ok | ok | ok | > bad unlock order: ok | ok | ok | ok | ok | ok | > -------------------------------------------------------------------------- > recursive read-lock: | ok | | ok | > recursive read-lock #2: | ok | | ok | > mixed read-write-lock: | ok | | ok | > mixed write-read-lock: | ok | | ok | > -------------------------------------------------------------------------- > hard-irqs-on + irq-safe-A/12: ok | ok | ok | > soft-irqs-on + irq-safe-A/12: ok | ok | ok | > hard-irqs-on + irq-safe-A/21: ok | ok | ok | > soft-irqs-on + irq-safe-A/21: ok | ok | ok | > sirq-safe-A => hirqs-on/12: ok | ok | ok | > sirq-safe-A => hirqs-on/21: ok | ok | ok | > hard-safe-A + irqs-on/12: ok | ok | ok | > soft-safe-A + irqs-on/12: ok | ok | ok | > hard-safe-A + irqs-on/21: ok | ok | ok | > soft-safe-A + irqs-on/21: ok | ok | ok | > hard-safe-A + unsafe-B #1/123: ok | ok | ok | > soft-safe-A + unsafe-B #1/123: ok | ok | ok | > hard-safe-A + unsafe-B #1/132: ok | ok | ok | > soft-safe-A + unsafe-B #1/132: ok | ok | ok | > hard-safe-A + unsafe-B #1/213: ok | ok | ok | > soft-safe-A + unsafe-B #1/213: ok | ok | ok | > hard-safe-A + unsafe-B #1/231: ok | ok | ok | > soft-safe-A + unsafe-B #1/231: ok | ok | ok | > hard-safe-A + unsafe-B #1/312: ok | ok | ok | > soft-safe-A + unsafe-B #1/312: ok | ok | ok | > hard-safe-A + unsafe-B #1/321: ok | ok | ok | > soft-safe-A + unsafe-B #1/321: ok | ok | ok | > hard-safe-A + unsafe-B #2/123: ok | ok | ok | > soft-safe-A + unsafe-B #2/123: ok | ok | ok | > hard-safe-A + unsafe-B #2/132: ok | ok | ok | > soft-safe-A + unsafe-B #2/132: ok | ok | ok | > hard-safe-A + unsafe-B #2/213: ok | ok | ok | > soft-safe-A + unsafe-B #2/213: ok | ok | ok | > hard-safe-A + unsafe-B #2/231: ok | ok | ok | > soft-safe-A + unsafe-B #2/231: ok | ok | ok | > hard-safe-A + unsafe-B #2/312: ok | ok | ok | > soft-safe-A + unsafe-B #2/312: ok | ok | ok | > hard-safe-A + unsafe-B #2/321: ok | ok | ok | > soft-safe-A + unsafe-B #2/321: ok | ok | ok | > hard-irq lock-inversion/123: ok | ok | ok | > soft-irq lock-inversion/123: ok | ok | ok | > hard-irq lock-inversion/132: ok | ok | ok | > soft-irq lock-inversion/132: ok | ok | ok | > hard-irq lock-inversion/213: ok | ok | ok | > soft-irq lock-inversion/213: ok | ok | ok | > hard-irq lock-inversion/231: ok | ok | ok | > soft-irq lock-inversion/231: ok | ok | ok | > hard-irq lock-inversion/312: ok | ok | ok | > soft-irq lock-inversion/312: ok | ok | ok | > hard-irq lock-inversion/321: ok | ok | ok | > soft-irq lock-inversion/321: ok | ok | ok | > hard-irq read-recursion/123: ok | > soft-irq read-recursion/123: ok | > hard-irq read-recursion/132: ok | > soft-irq read-recursion/132: ok | > hard-irq read-recursion/213: ok | > soft-irq read-recursion/213: ok | > hard-irq read-recursion/231: ok | > soft-irq read-recursion/231: ok | > hard-irq read-recursion/312: ok | > soft-irq read-recursion/312: ok | > hard-irq read-recursion/321: ok | > soft-irq read-recursion/321: ok | > ------------------------------------------------------- > Good, all 218 testcases passed! | > --------------------------------- > Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) > Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) > Memory: 966876k/982464k available (2071k kernel code, 15072k reserved, 891k data, 272k init, 64960k highmem) > virtual kernel memory layout: > fixmap : 0xfffa8000 - 0xfffff000 ( 348 kB) > pkmap : 0xff800000 - 0xffc00000 (4096 kB) > vmalloc : 0xf8800000 - 0xff7fe000 ( 111 MB) > lowmem : 0xc0000000 - 0xf8000000 ( 896 MB) > .init : 0xc03e8000 - 0xc042c000 ( 272 kB) > .data : 0xc0305c2b - 0xc03e4c18 ( 891 kB) > .text : 0xc0100000 - 0xc0305c2b (2071 kB) > Checking if this processor honours the WP bit even in supervisor mode...Ok. > CPA: page pool initialized 1 of 1 pages preallocated > Calibrating delay using timer specific routine.. 3210.53 BogoMIPS (lpj=1605269) > Mount-cache hash table entries: 512 > CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) > CPU: L2 Cache: 128K (64 bytes/line) > Intel machine check architecture supported. > Intel machine check reporting enabled on CPU#0. > Compat vDSO mapped to ffffe000. > CPU: AMD Mobile AMD Sempron(tm) Processor 2600+ stepping 00 > Checking 'hlt' instruction... OK. > Freeing SMP alternatives: 0k freed > ACPI: Core revision 20070126 > Parsing all Control Methods: > Table [DSDT](id 0001) - 480 Objects with 49 Devices 147 Methods 13 Regions > Parsing all Control Methods: > Table [SSDT](id 0002) - 3 Objects with 0 Devices 0 Methods 0 Regions > tbxface-0598 [00] tb_load_namespace : ACPI Tables successfully acquired > evxfevnt-0091 [00] enable : Transition to ACPI mode successful > ENABLING IO-APIC IRQs > ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=0 pin2=0 > net_namespace: 604 bytes > NET: Registered protocol family 16 > EISA bus registered > ACPI: bus type pci registered > PCI: PCI BIOS revision 2.10 entry at 0xfd88c, last bus=1 > PCI: Using configuration type 1 > Setting up standard PCI resources > evgpeblk-0956 [00] ev_create_gpe_block : GPE 00 to 0F [_GPE] 2 regs on int 0xA > evgpeblk-1052 [00] ev_initialize_gpe_bloc: Found 4 Wake, Enabled 0 Runtime GPEs in this block > ACPI: EC: Look up EC in DSDT > Completing Region/Field/Buffer/Package initialization:..................................................... > Initialized 11/13 Regions 1/1 Fields 23/24 Buffers 18/26 Packages (492 nodes) > Initializing Device/Processor/Thermal objects by executing _INI methods:. > Executed 1 _INI methods requiring 1 _STA executions (examined 53 objects) > ACPI: Interpreter enabled > ACPI: (supports S0 S3 S4 S5) > ACPI: Using IOAPIC for interrupt routing > ACPI: EC: non-query interrupt received, switching to interrupt mode > ACPI: EC: missing write data confirmation, don't expect it any longer. > ACPI: EC: GPE = 0xb, I/O: command/status = 0x66, data = 0x62 > ACPI: EC: driver started in interrupt mode > ACPI: PCI Root Bridge [PCI0] (0000:00) > pci 0000:00:11.0: quirk: region 4000-407f claimed by vt8235 PM > pci 0000:00:11.0: quirk: region 8100-810f claimed by vt8235 SMB > ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] > ACPI: PCI Interrupt Link [ALKA] (IRQs 16 17 18 19 20 21 22 23) *9, disabled. > ACPI: PCI Interrupt Link [ALKB] (IRQs 16 17 18 19 20 21 22 23) *11, disabled. > ACPI: PCI Interrupt Link [ALKC] (IRQs 22) *10, disabled. > ACPI: PCI Interrupt Link [ALKD] (IRQs 21) *5, disabled. > ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 7 *9 12 14 15) > ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 7 10 12 14 15) *11 > ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 7 11 12 14 15) *10 > ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 *5 7 9 10 11 12 14 15) > Linux Plug and Play Support v0.97 (c) Adam Belay > pnp: PnP ACPI init > ACPI: bus type pnp registered > pnp 00:00: Plug and Play ACPI device, IDs PNP0a03 (active) > pnp 00:01: Plug and Play ACPI device, IDs PNP0200 (active) > pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active) > pnp 00:03: Plug and Play ACPI device, IDs PNP0c04 (active) > pnp 00:04: Plug and Play ACPI device, IDs PNP0800 (active) > 00:05: calling quirk 0xc025ae70: quirk_supermicro_h8dce_system+0x0/0x110() > pnp 00:05: Plug and Play ACPI device, IDs PNP0c01 (active) > 00:06: calling quirk 0xc025ae70: quirk_supermicro_h8dce_system+0x0/0x110() > pnp 00:06: Plug and Play ACPI device, IDs PNP0c02 (active) > pnp 00:07: Plug and Play ACPI device, IDs PNP0f13 (active) > pnp 00:08: Plug and Play ACPI device, IDs PNP0303 (active) > pnp 00:09: Plug and Play ACPI device, IDs PNP0501 (active) > pnp 00:0a: Plug and Play ACPI device, IDs PNP0401 (active) > pnp: PnP ACPI: found 11 devices > ACPI: ACPI bus type pnp unregistered > PCI: Using ACPI for IRQ routing > PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report > pnp: the driver 'system' has been registered > system 00:05: iomem range 0x0-0x9ffff could not be reserved > system 00:05: iomem range 0xe0000-0xfffff could not be reserved > system 00:05: iomem range 0xfff00000-0xffffffff could not be reserved > system 00:05: iomem range 0xffee0000-0xffefffff has been reserved > system 00:05: iomem range 0xfec00000-0xfec00fff has been reserved > system 00:05: iomem range 0xfee00000-0xfee00fff has been reserved > system 00:05: driver attached > system 00:06: ioport range 0x4d0-0x4d1 has been reserved > system 00:06: ioport range 0xfe10-0xfe11 has been reserved > system 00:06: ioport range 0xfe00-0xfe00 has been reserved > system 00:06: ioport range 0x4000-0x407f has been reserved > system 00:06: ioport range 0x8100-0x811f could not be reserved > Time: tsc clocksource has been installed. > system 00:06: driver attached > PCI: Bridge: 0000:00:01.0 > IO window: disabled. > MEM window: 0xd1000000-0xd1ffffff > PREFETCH window: 0x00000000f0000000-0x00000000f3ffffff > PCI: Bus 2, cardbus bridge: 0000:00:0c.0 > IO window: 0x00002000-0x000020ff > IO window: 0x00002400-0x000024ff > PREFETCH window: 0x50000000-0x53ffffff > MEM window: 0x54000000-0x57ffffff > PCI: Setting latency timer of device 0000:00:01.0 to 64 > PCI: Enabling device 0000:00:0c.0 (0000 -> 0003) > ACPI: PCI Interrupt 0000:00:0c.0[A] -> GSI 16 (level, low) -> IRQ 16 > PCI: Setting latency timer of device 0000:00:0c.0 to 64 > NET: Registered protocol family 2 > IP route cache hash table entries: 32768 (order: 5, 131072 bytes) > TCP established hash table entries: 131072 (order: 8, 1048576 bytes) > TCP bind hash table entries: 65536 (order: 9, 2097152 bytes) > TCP: Hash tables configured (established 131072 bind 65536) > TCP reno registered > audit: initializing netlink socket (disabled) > type=2000 audit(1204788516.711:1): initialized > highmem bounce pool size: 64 pages > io scheduler noop registered > io scheduler cfq registered (default) > PCI: VIA PCI bridge detected. Disabling DAC. > pci 0000:01:00.0: Boot video device > isapnp: Scanning for PnP cards... > isapnp: No Plug & Play device found > Uniform Multi-Platform E-IDE driver > ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx > VP_IDE: IDE controller (0x1106:0x0571 rev 0x06) at PCI slot 0000:00:11.1 > ACPI: PCI Interrupt Link [ALKA] disabled and referenced, BIOS bug > ACPI: PCI Interrupt Link [ALKA] BIOS reported IRQ 0, using IRQ 23 > ACPI: PCI Interrupt Link [ALKA] enabled at IRQ 23 > ACPI: PCI Interrupt 0000:00:11.1[A] -> Link [ALKA] -> GSI 23 (level, low) -> IRQ 23 > VP_IDE: not 100% native mode: will probe irqs later > VP_IDE: VIA vt8235 (rev 00) IDE UDMA133 controller on pci0000:00:11.1 > ide0: BM-DMA at 0x1c60-0x1c67, BIOS settings: hda:DMA, hdb:PIO > ide1: BM-DMA at 0x1c68-0x1c6f, BIOS settings: hdc:DMA, hdd:PIO > Probing IDE interface ide0... > Switched to high resolution mode on CPU 0 > hdb: IRQ probe failed (0xfffffbfe) > hdb: IRQ probe failed (0xfffffbfe) > hda: SAMSUNG MP0804H, ATA DISK drive > hda: host max PIO5 wanted PIO255(auto-tune) selected PIO4 > hda: UDMA/100 mode selected > Probing IDE interface ide1... > hdc: Optiarc DVD RW AD-7543A, ATAPI CD/DVD-ROM drive > hdc: host max PIO5 wanted PIO255(auto-tune) selected PIO4 > hdc: UDMA/33 mode selected > ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 > ide1 at 0x170-0x177,0x376 on irq 15 > pnp: the driver 'ide' has been registered > hda: max request size: 512KiB > hda: 156368016 sectors (80060 MB) w/8192KiB Cache, CHS=16383/255/63 > hda: cache flushes supported > hda: hda1 hda2 hda3 > TCP cubic registered > NET: Registered protocol family 1 > NET: Registered protocol family 17 > Using IPI Shortcut mode > ReiserFS: hda3: found reiserfs format "3.6" with standard journal > ReiserFS: hda3: using ordered data mode > ReiserFS: hda3: journal params: device hda3, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30 > ReiserFS: hda3: checking transaction log (hda3) > ReiserFS: hda3: Using r5 hash to sort names > VFS: Mounted root (reiserfs filesystem) readonly. > Freeing unused kernel memory: 272k freed > Write protecting the kernel read-only data: 732k > ACPI: CPU0 (power states: C1[C1] C2[C2]) > ACPI: ACPI0007:00 is registered as cooling_device0 > input: Power Button (FF) as /class/input/input0 > ACPI: Power Button (FF) [PWRF] > input: Power Button (CM) as /class/input/input1 > ACPI: Power Button (CM) [PWB] > input: Sleep Button (CM) as /class/input/input2 > ACPI: Sleep Button (CM) [SLPB] > input: Lid Switch as /class/input/input3 > ACPI: Lid Switch [LID] > ACPI: LNXTHERM:01 is registered as thermal_zone0 > ACPI: Thermal Zone [THRM] (14 C) > ACPI: AC Adapter [AC] (on-line) > ACPI: Battery Slot [BAT0] (battery present) > Yenta: CardBus bridge found at 0000:00:0c.0 [1558:4702] > Yenta: Using CSCINT to route CSC interrupts to PCI > Yenta: Routing CardBus interrupts to PCI > Yenta TI: socket 0000:00:0c.0, mfunc 0x00001002, devctl 0x44 > 8139too Fast Ethernet driver 0.9.28 > hdc: ATAPI 24X DVD-ROM DVD-R-RAM CD-R/RW drive, 2048kB Cache > Uniform CD-ROM driver Revision: 3.20 > Yenta: ISA IRQ mask 0x0840, PCI irq 16 > Socket status: 30000006 > ACPI: PCI Interrupt 0000:00:08.0[A] -> GSI 19 (level, low) -> IRQ 19 > eth0: RealTek RTL8139 at 0xf88fa000, 00:90:f5:3e:5a:ca, IRQ 19 > eth0: Identified 8139 chip type 'RTL-8100B/8139D' > Marking TSC unstable due to: possible TSC halt in C2. > Time: acpi_pm clocksource has been installed. > usbcore: registered new interface driver usbfs > usbcore: registered new interface driver hub > usbcore: registered new device driver usb > input: PC Speaker as /class/input/input4 > pnp: the driver 'parport_pc' has been registered > parport_pc 00:0a: reported by Plug and Play ACPI > parport0: PC-style at 0x378 (0x778), irq 7, dma 1 [PCSPP,TRISTATE,COMPAT,ECP,DMA] > Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing disabled > serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A > Real Time Clock Driver v1.12ac > parport_pc 00:0a: driver attached > USB Universal Host Controller Interface driver v3.0 > ACPI: PCI Interrupt Link [ALKD] disabled and referenced, BIOS bug > ACPI: PCI Interrupt Link [ALKD] BIOS reported IRQ 0, using IRQ 21 > ACPI: PCI Interrupt Link [ALKD] enabled at IRQ 21 > ACPI: PCI Interrupt 0000:00:10.0[A] -> Link [ALKD] -> GSI 21 (level, low) -> IRQ 21 > uhci_hcd 0000:00:10.0: UHCI Host Controller > uhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 1 > uhci_hcd 0000:00:10.0: irq 21, io base 0x00001c00 > usb usb1: configuration #1 chosen from 1 choice > hub 1-0:1.0: USB hub found > hub 1-0:1.0: 2 ports detected > ACPI: PCI Interrupt 0000:00:10.1[B] -> Link [ALKD] -> GSI 21 (level, low) -> IRQ 21 > uhci_hcd 0000:00:10.1: UHCI Host Controller > uhci_hcd 0000:00:10.1: new USB bus registered, assigned bus number 2 > uhci_hcd 0000:00:10.1: irq 21, io base 0x00001c20 > usb usb2: configuration #1 chosen from 1 choice > hub 2-0:1.0: USB hub found > hub 2-0:1.0: 2 ports detected > ACPI: PCI Interrupt 0000:00:10.2[C] -> Link [ALKD] -> GSI 21 (level, low) -> IRQ 21 > uhci_hcd 0000:00:10.2: UHCI Host Controller > uhci_hcd 0000:00:10.2: new USB bus registered, assigned bus number 3 > uhci_hcd 0000:00:10.2: irq 21, io base 0x00001c40 > usb usb3: configuration #1 chosen from 1 choice > hub 3-0:1.0: USB hub found > hub 3-0:1.0: 2 ports detected > pnp: the driver 'serial' has been registered > 00:09: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A > serial 00:09: driver attached > ACPI: PCI Interrupt 0000:00:10.3[D] -> Link [ALKD] -> GSI 21 (level, low) -> IRQ 21 > ehci_hcd 0000:00:10.3: EHCI Host Controller > ehci_hcd 0000:00:10.3: new USB bus registered, assigned bus number 4 > ehci_hcd 0000:00:10.3: irq 21, io mem 0xd0004400 > ehci_hcd 0000:00:10.3: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 > usb usb4: configuration #1 chosen from 1 choice > hub 4-0:1.0: USB hub found > hub 4-0:1.0: 6 ports detected > cs: IO port probe 0x100-0x4ff: clean. > cs: IO port probe 0x800-0x8ff: clean. > cs: IO port probe 0xc00-0xcff: clean. > cs: IO port probe 0xa00-0xaff: clean. > ACPI: PCI Interrupt Link [ALKC] disabled and referenced, BIOS bug > ACPI: PCI Interrupt Link [ALKC] BIOS reported IRQ 0, using IRQ 22 > ACPI: PCI Interrupt Link [ALKC] enabled at IRQ 22 > ACPI: PCI Interrupt 0000:00:11.6[C] -> Link [ALKC] -> GSI 22 (level, low) -> IRQ 22 > PCI: Setting latency timer of device 0000:00:11.6 to 64 > ACPI: PCI Interrupt 0000:00:11.5[C] -> Link [ALKC] -> GSI 22 (level, low) -> IRQ 22 > PCI: Setting latency timer of device 0000:00:11.5 to 64 > Adding 1951888k swap on /dev/hda2. Priority:-1 extents:1 across:1951888k > pnp: the driver 'i8042 kbd' has been registered > i8042 kbd 00:08: driver attached > pnp: the driver 'i8042 aux' has been registered > i8042 aux 00:07: driver attached > PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12 > i8042.c: Detected active multiplexing controller, rev 1.1. > serio: i8042 KBD port at 0x60,0x64 irq 1 > serio: i8042 AUX0 port at 0x60,0x64 irq 12 > serio: i8042 AUX1 port at 0x60,0x64 irq 12 > serio: i8042 AUX2 port at 0x60,0x64 irq 12 > serio: i8042 AUX3 port at 0x60,0x64 irq 12 > input: AT Translated Set 2 keyboard as /class/input/input5 > powernow-k8: Found 1 Mobile AMD Sempron(tm) Processor 2600+ processors (1 cpu cores) (version 2.20.00) > powernow-k8: 0 : fid 0x8 (1600 MHz), vid 0x6 > powernow-k8: 1 : fid 0x0 (800 MHz), vid 0x18 > powernow-k8: ph2 null fid transition 0x8 > input: PS/2 Mouse as /class/input/input6 > input: AlpsPS/2 ALPS GlidePoint as /class/input/input7 > mice: PS/2 mouse device common for all mice > Linux agpgart interface v0.103 > [drm] Initialized drm 1.1.0 20060810 > ACPI: PCI Interrupt 0000:01:00.0[A] -> GSI 16 (level, low) -> IRQ 16 > [drm] Initialized via 2.11.1 20070202 on minor 0 > leds_clevo_mail: 'Clevo D410J' found > Registered led device: clevo::mail > ACPI Exception (thermal-0514): AE_ERROR, ACPI thermal trip point state changed > Please send acpidump to linux-acpi@vger.kernel.org > [20070126] > ReiserFS: hda1: found reiserfs format "3.6" with standard journal > ReiserFS: hda1: using ordered data mode > ReiserFS: hda1: journal params: device hda1, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30 > ReiserFS: hda1: checking transaction log (hda1) > ReiserFS: hda1: Using r5 hash to sort names > ip_tables: (C) 2000-2006 Netfilter Core Team > eth0: link up, 100Mbps, full-duplex, lpa 0x41E1 > NET: Registered protocol family 10 > lp0: using parport0 (interrupt-driven). > ppdev: user-space parallel port driver > Clocksource tsc unstable (delta = -282353088 ns) > eth0: no IPv6 routers present > warning: `avahi-daemon' uses 32-bit capabilities (legacy support in use) > irq 16: nobody cared (try booting with the "irqpoll" option) > Pid: 0, comm: swapper Not tainted 2.6.25-rc4 #1 > [<c0157227>] __report_bad_irq+0x27/0x90 > [<c01574c6>] note_interrupt+0x236/0x270 > [<c01568d3>] ? handle_IRQ_event+0x53/0x60 > [<c0157b6a>] handle_fasteoi_irq+0x7a/0xd0 > [<c0106174>] do_IRQ+0x44/0xa0 > [<c0104c66>] common_interrupt+0x2e/0x34 > [<c0301ac8>] ? _spin_unlock_irq+0x28/0x50 > [<c0118974>] finish_task_switch+0x54/0xc0 > [<c0118920>] ? finish_task_switch+0x0/0xc0 > [<c02ff326>] schedule+0x2b6/0x470 > [<f892fdae>] ? acpi_processor_idle+0x0/0x436 [processor] > [<c0102b65>] cpu_idle+0xb5/0xd0 > [<c02fa66c>] rest_init+0x5c/0x60 > ======================= > handlers: > [<f8915830>] (yenta_interrupt+0x0/0xe0 [yenta_socket]) > [<f8aee3f0>] (via_driver_irq_handler+0x0/0x1c0 [via]) > Disabling IRQ #16 -- To unsubscribe from this list: send the line "unsubscribe linux-acpi" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html ^ permalink raw reply [flat|nested] 18+ messages in thread
* RE: AE_ERROR, ACPI thermal trip point state changed 2008-03-05 22:49 ` Zhang, Rui @ 2008-03-06 8:05 ` Zhang, Rui 2008-03-07 6:54 ` Németh Márton 0 siblings, 1 reply; 18+ messages in thread From: Zhang, Rui @ 2008-03-06 8:05 UTC (permalink / raw) To: Zhang, Rui, Németh Márton; +Cc: linux-acpi, LKML Please attach the result of "cat /proc/acpi/thermal_zone/*/*" after this message is shown. Thanks, rui >-----Original Message----- >From: linux-acpi-owner@vger.kernel.org >[mailto:linux-acpi-owner@vger.kernel.org] On Behalf Of Zhang, Rui >Sent: Thursday, March 06, 2008 6:50 AM >To: Németh Márton >Cc: linux-acpi@vger.kernel.org; LKML >Subject: Re: AE_ERROR, ACPI thermal trip point state changed > >hi, Márton, > >Please re-send the acpidump using the latest pmtools at >http://www.kernel.org/pub/linux/kernel/people/lenb/acpi/utils/ > >thanks, >rui > >On Thu, 2008-03-06 at 08:01 +0100, Németh Márton wrote: >> Hi, >> >> in my dmesg the following lines appear with linux-2.6.25-rc4 on Clevo D410J >laptop: >> >> ACPI Exception (thermal-0514): AE_ERROR, ACPI thermal trip point state changed >> Please send acpidump to linux-acpi@vger.kernel.org >> [20070126] >> >> Should I do something else than sending the acpidump? >> >> Márton Németh >> >> >> Németh Márton wrote: >> > Hi, >> > >> > I get the following message from the kernel 2.6.25-rc1 on Clevo D410J laptop: >> > >> > ACPI Exception (thermal-0514): AE_ERROR, ACPI thermal trip point state >changed >> > Please send acpidump to linux-acpi@vger.kernel.org >> > [20070126] >> > >> > So I am writing this email to you. >> > >> > Márton Németh >> >> plain text document attachment (dmesg-2.6.25-rc4.txt) >> Linux version 2.6.25-rc4 (nmarci@europa) (gcc version 4.2.3 20080114 >(prerelease) (Debian 4.2.2-7)) #1 PREEMPT Wed Mar 5 21:34:08 CET 2008 >> BIOS-provided physical RAM map: >> BIOS-e820: 0000000000000000 - 000000000009f800 (usable) >> BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved) >> BIOS-e820: 00000000000d8000 - 0000000000100000 (reserved) >> BIOS-e820: 0000000000100000 - 000000003bf70000 (usable) >> BIOS-e820: 000000003bf70000 - 000000003bf7a000 (ACPI data) >> BIOS-e820: 000000003bf7a000 - 000000003bf80000 (ACPI NVS) >> BIOS-e820: 000000003bf80000 - 0000000040000000 (reserved) >> BIOS-e820: 00000000fffe0000 - 0000000100000000 (reserved) >> 63MB HIGHMEM available. >> 896MB LOWMEM available. >> Scan SMP from c0000000 for 1024 bytes. >> Scan SMP from c009fc00 for 1024 bytes. >> Scan SMP from c00f0000 for 65536 bytes. >> found SMP MP-table at [c00f6870] 000f6870 >> Entering add_active_range(0, 0, 245616) 0 entries of 256 used >> Zone PFN ranges: >> DMA 0 -> 4096 >> Normal 4096 -> 229376 >> HighMem 229376 -> 245616 >> Movable zone start PFN for each node >> early_node_map[1] active PFN ranges >> 0: 0 -> 245616 >> On node 0 totalpages: 245616 >> DMA zone: 32 pages used for memmap >> DMA zone: 0 pages reserved >> DMA zone: 4064 pages, LIFO batch:0 >> Normal zone: 1760 pages used for memmap >> Normal zone: 223520 pages, LIFO batch:31 >> HighMem zone: 126 pages used for memmap >> HighMem zone: 16114 pages, LIFO batch:3 >> Movable zone: 0 pages used for memmap >> DMI present. >> ACPI: RSDP 000F68D0, 0014 (r0 PTLTD ) >> ACPI: RSDT 3BF7600B, 0030 (r1 PTLTD RSDT 6040000 LTP 0) >> ACPI: FACP 3BF79E87, 0074 (r1 AMDK8 PTLTW 6040000 PTL_ F4240) >> ACPI: DSDT 3BF7603B, 3E4C (r1 VIA PTL_ACPI 6040000 MSFT 100000E) >> ACPI: FACS 3BF7AFC0, 0040 >> ACPI: SSDT 3BF79EFB, 00B5 (r1 PTLTD POWERNOW 6040000 LTP 1) >> ACPI: APIC 3BF79FB0, 0050 (r1 PTLTD APIC 6040000 LTP 0) >> ACPI: PM-Timer IO Port: 0x4008 >> ACPI: Local APIC address 0xfee00000 >> ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) >> Processor #0 15:12 APIC version 16 >> ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) >> ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0]) >> IOAPIC[0]: apic_id 1, version 3, address 0xfec00000, GSI 0-23 >> ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 high edge) >> ACPI: IRQ0 used by override. >> ACPI: IRQ2 used by override. >> ACPI: IRQ10 used by override. >> Enabling APIC mode: Flat. Using 1 I/O APICs >> Using ACPI (MADT) for SMP configuration information >> Allocating PCI resources starting at 50000000 (gap: 40000000:bffe0000) >> PM: Registered nosave memory: 000000000009f000 - 00000000000a0000 >> PM: Registered nosave memory: 00000000000a0000 - 00000000000d8000 >> PM: Registered nosave memory: 00000000000d8000 - 0000000000100000 >> Built 1 zonelists in Zone order, mobility grouping on. Total pages: 243698 >> Kernel command line: root=/dev/hda3 ro log_buf_len=1M resume=/dev/hda2 >> log_buf_len: 1048576 >> mapped APIC to ffffb000 (fee00000) >> mapped IOAPIC to ffffa000 (fec00000) >> Enabling fast FPU save and restore... done. >> Enabling unmasked SIMD FPU exception support... done. >> Initializing CPU#0 >> PID hash table entries: 4096 (order: 12, 16384 bytes) >> Detected 1603.695 MHz processor. >> Console: colour VGA+ 80x25 >> console [tty0] enabled >> Lock dependency validator: Copyright (c) 2006 Red Hat, Inc., Ingo Molnar >> ... MAX_LOCKDEP_SUBCLASSES: 8 >> ... MAX_LOCK_DEPTH: 48 >> ... MAX_LOCKDEP_KEYS: 2048 >> ... CLASSHASH_SIZE: 1024 >> ... MAX_LOCKDEP_ENTRIES: 8192 >> ... MAX_LOCKDEP_CHAINS: 16384 >> ... CHAINHASH_SIZE: 8192 >> memory used by lock dependency info: 992 kB >> per task-struct memory footprint: 1920 bytes >> ------------------------ >> | Locking API testsuite: >> >--------------------------------------------------------------------------- >- >> | spin |wlock |rlock |mutex | wsem | rsem >| >> >-------------------------------------------------------------------------- >> A-A deadlock: ok | ok | ok | ok | ok | ok >| >> A-B-B-A deadlock: ok | ok | ok | ok | ok | ok >| >> A-B-B-C-C-A deadlock: ok | ok | ok | ok | ok | ok >| >> A-B-C-A-B-C deadlock: ok | ok | ok | ok | ok | ok >| >> A-B-B-C-C-D-D-A deadlock: ok | ok | ok | ok | ok | ok >| >> A-B-C-D-B-D-D-A deadlock: ok | ok | ok | ok | ok | ok >| >> A-B-C-D-B-C-D-A deadlock: ok | ok | ok | ok | ok | ok >| >> double unlock: ok | ok | ok | ok | ok | ok >| >> initialize held: ok | ok | ok | ok | ok | ok >| >> bad unlock order: ok | ok | ok | ok | ok | ok >| >> >-------------------------------------------------------------------------- >> recursive read-lock: | ok | | ok >| >> recursive read-lock #2: | ok | | ok >| >> mixed read-write-lock: | ok | | ok >| >> mixed write-read-lock: | ok | | ok >| >> >-------------------------------------------------------------------------- >> hard-irqs-on + irq-safe-A/12: ok | ok | ok | >> soft-irqs-on + irq-safe-A/12: ok | ok | ok | >> hard-irqs-on + irq-safe-A/21: ok | ok | ok | >> soft-irqs-on + irq-safe-A/21: ok | ok | ok | >> sirq-safe-A => hirqs-on/12: ok | ok | ok | >> sirq-safe-A => hirqs-on/21: ok | ok | ok | >> hard-safe-A + irqs-on/12: ok | ok | ok | >> soft-safe-A + irqs-on/12: ok | ok | ok | >> hard-safe-A + irqs-on/21: ok | ok | ok | >> soft-safe-A + irqs-on/21: ok | ok | ok | >> hard-safe-A + unsafe-B #1/123: ok | ok | ok | >> soft-safe-A + unsafe-B #1/123: ok | ok | ok | >> hard-safe-A + unsafe-B #1/132: ok | ok | ok | >> soft-safe-A + unsafe-B #1/132: ok | ok | ok | >> hard-safe-A + unsafe-B #1/213: ok | ok | ok | >> soft-safe-A + unsafe-B #1/213: ok | ok | ok | >> hard-safe-A + unsafe-B #1/231: ok | ok | ok | >> soft-safe-A + unsafe-B #1/231: ok | ok | ok | >> hard-safe-A + unsafe-B #1/312: ok | ok | ok | >> soft-safe-A + unsafe-B #1/312: ok | ok | ok | >> hard-safe-A + unsafe-B #1/321: ok | ok | ok | >> soft-safe-A + unsafe-B #1/321: ok | ok | ok | >> hard-safe-A + unsafe-B #2/123: ok | ok | ok | >> soft-safe-A + unsafe-B #2/123: ok | ok | ok | >> hard-safe-A + unsafe-B #2/132: ok | ok | ok | >> soft-safe-A + unsafe-B #2/132: ok | ok | ok | >> hard-safe-A + unsafe-B #2/213: ok | ok | ok | >> soft-safe-A + unsafe-B #2/213: ok | ok | ok | >> hard-safe-A + unsafe-B #2/231: ok | ok | ok | >> soft-safe-A + unsafe-B #2/231: ok | ok | ok | >> hard-safe-A + unsafe-B #2/312: ok | ok | ok | >> soft-safe-A + unsafe-B #2/312: ok | ok | ok | >> hard-safe-A + unsafe-B #2/321: ok | ok | ok | >> soft-safe-A + unsafe-B #2/321: ok | ok | ok | >> hard-irq lock-inversion/123: ok | ok | ok | >> soft-irq lock-inversion/123: ok | ok | ok | >> hard-irq lock-inversion/132: ok | ok | ok | >> soft-irq lock-inversion/132: ok | ok | ok | >> hard-irq lock-inversion/213: ok | ok | ok | >> soft-irq lock-inversion/213: ok | ok | ok | >> hard-irq lock-inversion/231: ok | ok | ok | >> soft-irq lock-inversion/231: ok | ok | ok | >> hard-irq lock-inversion/312: ok | ok | ok | >> soft-irq lock-inversion/312: ok | ok | ok | >> hard-irq lock-inversion/321: ok | ok | ok | >> soft-irq lock-inversion/321: ok | ok | ok | >> hard-irq read-recursion/123: ok | >> soft-irq read-recursion/123: ok | >> hard-irq read-recursion/132: ok | >> soft-irq read-recursion/132: ok | >> hard-irq read-recursion/213: ok | >> soft-irq read-recursion/213: ok | >> hard-irq read-recursion/231: ok | >> soft-irq read-recursion/231: ok | >> hard-irq read-recursion/312: ok | >> soft-irq read-recursion/312: ok | >> hard-irq read-recursion/321: ok | >> soft-irq read-recursion/321: ok | >> ------------------------------------------------------- >> Good, all 218 testcases passed! | >> --------------------------------- >> Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) >> Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) >> Memory: 966876k/982464k available (2071k kernel code, 15072k reserved, 891k >data, 272k init, 64960k highmem) >> virtual kernel memory layout: >> fixmap : 0xfffa8000 - 0xfffff000 ( 348 kB) >> pkmap : 0xff800000 - 0xffc00000 (4096 kB) >> vmalloc : 0xf8800000 - 0xff7fe000 ( 111 MB) >> lowmem : 0xc0000000 - 0xf8000000 ( 896 MB) >> .init : 0xc03e8000 - 0xc042c000 ( 272 kB) >> .data : 0xc0305c2b - 0xc03e4c18 ( 891 kB) >> .text : 0xc0100000 - 0xc0305c2b (2071 kB) >> Checking if this processor honours the WP bit even in supervisor mode...Ok. >> CPA: page pool initialized 1 of 1 pages preallocated >> Calibrating delay using timer specific routine.. 3210.53 BogoMIPS >(lpj=1605269) >> Mount-cache hash table entries: 512 >> CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) >> CPU: L2 Cache: 128K (64 bytes/line) >> Intel machine check architecture supported. >> Intel machine check reporting enabled on CPU#0. >> Compat vDSO mapped to ffffe000. >> CPU: AMD Mobile AMD Sempron(tm) Processor 2600+ stepping 00 >> Checking 'hlt' instruction... OK. >> Freeing SMP alternatives: 0k freed >> ACPI: Core revision 20070126 >> Parsing all Control Methods: >> Table [DSDT](id 0001) - 480 Objects with 49 Devices 147 Methods 13 Regions >> Parsing all Control Methods: >> Table [SSDT](id 0002) - 3 Objects with 0 Devices 0 Methods 0 Regions >> tbxface-0598 [00] tb_load_namespace : ACPI Tables successfully acquired >> evxfevnt-0091 [00] enable : Transition to ACPI mode successful >> ENABLING IO-APIC IRQs >> ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=0 pin2=0 >> net_namespace: 604 bytes >> NET: Registered protocol family 16 >> EISA bus registered >> ACPI: bus type pci registered >> PCI: PCI BIOS revision 2.10 entry at 0xfd88c, last bus=1 >> PCI: Using configuration type 1 >> Setting up standard PCI resources >> evgpeblk-0956 [00] ev_create_gpe_block : GPE 00 to 0F [_GPE] 2 regs on int >0xA >> evgpeblk-1052 [00] ev_initialize_gpe_bloc: Found 4 Wake, Enabled 0 Runtime >GPEs in this block >> ACPI: EC: Look up EC in DSDT >> Completing Region/Field/Buffer/Package >initialization:..................................................... >> Initialized 11/13 Regions 1/1 Fields 23/24 Buffers 18/26 Packages (492 nodes) >> Initializing Device/Processor/Thermal objects by executing _INI methods:. >> Executed 1 _INI methods requiring 1 _STA executions (examined 53 objects) >> ACPI: Interpreter enabled >> ACPI: (supports S0 S3 S4 S5) >> ACPI: Using IOAPIC for interrupt routing >> ACPI: EC: non-query interrupt received, switching to interrupt mode >> ACPI: EC: missing write data confirmation, don't expect it any longer. >> ACPI: EC: GPE = 0xb, I/O: command/status = 0x66, data = 0x62 >> ACPI: EC: driver started in interrupt mode >> ACPI: PCI Root Bridge [PCI0] (0000:00) >> pci 0000:00:11.0: quirk: region 4000-407f claimed by vt8235 PM >> pci 0000:00:11.0: quirk: region 8100-810f claimed by vt8235 SMB >> ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] >> ACPI: PCI Interrupt Link [ALKA] (IRQs 16 17 18 19 20 21 22 23) *9, disabled. >> ACPI: PCI Interrupt Link [ALKB] (IRQs 16 17 18 19 20 21 22 23) *11, disabled. >> ACPI: PCI Interrupt Link [ALKC] (IRQs 22) *10, disabled. >> ACPI: PCI Interrupt Link [ALKD] (IRQs 21) *5, disabled. >> ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 7 *9 12 14 15) >> ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 7 10 12 14 15) *11 >> ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 7 11 12 14 15) *10 >> ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 *5 7 9 10 11 12 14 15) >> Linux Plug and Play Support v0.97 (c) Adam Belay >> pnp: PnP ACPI init >> ACPI: bus type pnp registered >> pnp 00:00: Plug and Play ACPI device, IDs PNP0a03 (active) >> pnp 00:01: Plug and Play ACPI device, IDs PNP0200 (active) >> pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active) >> pnp 00:03: Plug and Play ACPI device, IDs PNP0c04 (active) >> pnp 00:04: Plug and Play ACPI device, IDs PNP0800 (active) >> 00:05: calling quirk 0xc025ae70: quirk_supermicro_h8dce_system+0x0/0x110() >> pnp 00:05: Plug and Play ACPI device, IDs PNP0c01 (active) >> 00:06: calling quirk 0xc025ae70: quirk_supermicro_h8dce_system+0x0/0x110() >> pnp 00:06: Plug and Play ACPI device, IDs PNP0c02 (active) >> pnp 00:07: Plug and Play ACPI device, IDs PNP0f13 (active) >> pnp 00:08: Plug and Play ACPI device, IDs PNP0303 (active) >> pnp 00:09: Plug and Play ACPI device, IDs PNP0501 (active) >> pnp 00:0a: Plug and Play ACPI device, IDs PNP0401 (active) >> pnp: PnP ACPI: found 11 devices >> ACPI: ACPI bus type pnp unregistered >> PCI: Using ACPI for IRQ routing >> PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report >> pnp: the driver 'system' has been registered >> system 00:05: iomem range 0x0-0x9ffff could not be reserved >> system 00:05: iomem range 0xe0000-0xfffff could not be reserved >> system 00:05: iomem range 0xfff00000-0xffffffff could not be reserved >> system 00:05: iomem range 0xffee0000-0xffefffff has been reserved >> system 00:05: iomem range 0xfec00000-0xfec00fff has been reserved >> system 00:05: iomem range 0xfee00000-0xfee00fff has been reserved >> system 00:05: driver attached >> system 00:06: ioport range 0x4d0-0x4d1 has been reserved >> system 00:06: ioport range 0xfe10-0xfe11 has been reserved >> system 00:06: ioport range 0xfe00-0xfe00 has been reserved >> system 00:06: ioport range 0x4000-0x407f has been reserved >> system 00:06: ioport range 0x8100-0x811f could not be reserved >> Time: tsc clocksource has been installed. >> system 00:06: driver attached >> PCI: Bridge: 0000:00:01.0 >> IO window: disabled. >> MEM window: 0xd1000000-0xd1ffffff >> PREFETCH window: 0x00000000f0000000-0x00000000f3ffffff >> PCI: Bus 2, cardbus bridge: 0000:00:0c.0 >> IO window: 0x00002000-0x000020ff >> IO window: 0x00002400-0x000024ff >> PREFETCH window: 0x50000000-0x53ffffff >> MEM window: 0x54000000-0x57ffffff >> PCI: Setting latency timer of device 0000:00:01.0 to 64 >> PCI: Enabling device 0000:00:0c.0 (0000 -> 0003) >> ACPI: PCI Interrupt 0000:00:0c.0[A] -> GSI 16 (level, low) -> IRQ 16 >> PCI: Setting latency timer of device 0000:00:0c.0 to 64 >> NET: Registered protocol family 2 >> IP route cache hash table entries: 32768 (order: 5, 131072 bytes) >> TCP established hash table entries: 131072 (order: 8, 1048576 bytes) >> TCP bind hash table entries: 65536 (order: 9, 2097152 bytes) >> TCP: Hash tables configured (established 131072 bind 65536) >> TCP reno registered >> audit: initializing netlink socket (disabled) >> type=2000 audit(1204788516.711:1): initialized >> highmem bounce pool size: 64 pages >> io scheduler noop registered >> io scheduler cfq registered (default) >> PCI: VIA PCI bridge detected. Disabling DAC. >> pci 0000:01:00.0: Boot video device >> isapnp: Scanning for PnP cards... >> isapnp: No Plug & Play device found >> Uniform Multi-Platform E-IDE driver >> ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx >> VP_IDE: IDE controller (0x1106:0x0571 rev 0x06) at PCI slot 0000:00:11.1 >> ACPI: PCI Interrupt Link [ALKA] disabled and referenced, BIOS bug >> ACPI: PCI Interrupt Link [ALKA] BIOS reported IRQ 0, using IRQ 23 >> ACPI: PCI Interrupt Link [ALKA] enabled at IRQ 23 >> ACPI: PCI Interrupt 0000:00:11.1[A] -> Link [ALKA] -> GSI 23 (level, low) -> >IRQ 23 >> VP_IDE: not 100% native mode: will probe irqs later >> VP_IDE: VIA vt8235 (rev 00) IDE UDMA133 controller on pci0000:00:11.1 >> ide0: BM-DMA at 0x1c60-0x1c67, BIOS settings: hda:DMA, hdb:PIO >> ide1: BM-DMA at 0x1c68-0x1c6f, BIOS settings: hdc:DMA, hdd:PIO >> Probing IDE interface ide0... >> Switched to high resolution mode on CPU 0 >> hdb: IRQ probe failed (0xfffffbfe) >> hdb: IRQ probe failed (0xfffffbfe) >> hda: SAMSUNG MP0804H, ATA DISK drive >> hda: host max PIO5 wanted PIO255(auto-tune) selected PIO4 >> hda: UDMA/100 mode selected >> Probing IDE interface ide1... >> hdc: Optiarc DVD RW AD-7543A, ATAPI CD/DVD-ROM drive >> hdc: host max PIO5 wanted PIO255(auto-tune) selected PIO4 >> hdc: UDMA/33 mode selected >> ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 >> ide1 at 0x170-0x177,0x376 on irq 15 >> pnp: the driver 'ide' has been registered >> hda: max request size: 512KiB >> hda: 156368016 sectors (80060 MB) w/8192KiB Cache, CHS=16383/255/63 >> hda: cache flushes supported >> hda: hda1 hda2 hda3 >> TCP cubic registered >> NET: Registered protocol family 1 >> NET: Registered protocol family 17 >> Using IPI Shortcut mode >> ReiserFS: hda3: found reiserfs format "3.6" with standard journal >> ReiserFS: hda3: using ordered data mode >> ReiserFS: hda3: journal params: device hda3, size 8192, journal first block >18, max trans len 1024, max batch 900, max commit age 30, max trans age 30 >> ReiserFS: hda3: checking transaction log (hda3) >> ReiserFS: hda3: Using r5 hash to sort names >> VFS: Mounted root (reiserfs filesystem) readonly. >> Freeing unused kernel memory: 272k freed >> Write protecting the kernel read-only data: 732k >> ACPI: CPU0 (power states: C1[C1] C2[C2]) >> ACPI: ACPI0007:00 is registered as cooling_device0 >> input: Power Button (FF) as /class/input/input0 >> ACPI: Power Button (FF) [PWRF] >> input: Power Button (CM) as /class/input/input1 >> ACPI: Power Button (CM) [PWB] >> input: Sleep Button (CM) as /class/input/input2 >> ACPI: Sleep Button (CM) [SLPB] >> input: Lid Switch as /class/input/input3 >> ACPI: Lid Switch [LID] >> ACPI: LNXTHERM:01 is registered as thermal_zone0 >> ACPI: Thermal Zone [THRM] (14 C) >> ACPI: AC Adapter [AC] (on-line) >> ACPI: Battery Slot [BAT0] (battery present) >> Yenta: CardBus bridge found at 0000:00:0c.0 [1558:4702] >> Yenta: Using CSCINT to route CSC interrupts to PCI >> Yenta: Routing CardBus interrupts to PCI >> Yenta TI: socket 0000:00:0c.0, mfunc 0x00001002, devctl 0x44 >> 8139too Fast Ethernet driver 0.9.28 >> hdc: ATAPI 24X DVD-ROM DVD-R-RAM CD-R/RW drive, 2048kB Cache >> Uniform CD-ROM driver Revision: 3.20 >> Yenta: ISA IRQ mask 0x0840, PCI irq 16 >> Socket status: 30000006 >> ACPI: PCI Interrupt 0000:00:08.0[A] -> GSI 19 (level, low) -> IRQ 19 >> eth0: RealTek RTL8139 at 0xf88fa000, 00:90:f5:3e:5a:ca, IRQ 19 >> eth0: Identified 8139 chip type 'RTL-8100B/8139D' >> Marking TSC unstable due to: possible TSC halt in C2. >> Time: acpi_pm clocksource has been installed. >> usbcore: registered new interface driver usbfs >> usbcore: registered new interface driver hub >> usbcore: registered new device driver usb >> input: PC Speaker as /class/input/input4 >> pnp: the driver 'parport_pc' has been registered >> parport_pc 00:0a: reported by Plug and Play ACPI >> parport0: PC-style at 0x378 (0x778), irq 7, dma 1 >[PCSPP,TRISTATE,COMPAT,ECP,DMA] >> Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing disabled >> serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A >> Real Time Clock Driver v1.12ac >> parport_pc 00:0a: driver attached >> USB Universal Host Controller Interface driver v3.0 >> ACPI: PCI Interrupt Link [ALKD] disabled and referenced, BIOS bug >> ACPI: PCI Interrupt Link [ALKD] BIOS reported IRQ 0, using IRQ 21 >> ACPI: PCI Interrupt Link [ALKD] enabled at IRQ 21 >> ACPI: PCI Interrupt 0000:00:10.0[A] -> Link [ALKD] -> GSI 21 (level, low) -> >IRQ 21 >> uhci_hcd 0000:00:10.0: UHCI Host Controller >> uhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 1 >> uhci_hcd 0000:00:10.0: irq 21, io base 0x00001c00 >> usb usb1: configuration #1 chosen from 1 choice >> hub 1-0:1.0: USB hub found >> hub 1-0:1.0: 2 ports detected >> ACPI: PCI Interrupt 0000:00:10.1[B] -> Link [ALKD] -> GSI 21 (level, low) -> >IRQ 21 >> uhci_hcd 0000:00:10.1: UHCI Host Controller >> uhci_hcd 0000:00:10.1: new USB bus registered, assigned bus number 2 >> uhci_hcd 0000:00:10.1: irq 21, io base 0x00001c20 >> usb usb2: configuration #1 chosen from 1 choice >> hub 2-0:1.0: USB hub found >> hub 2-0:1.0: 2 ports detected >> ACPI: PCI Interrupt 0000:00:10.2[C] -> Link [ALKD] -> GSI 21 (level, low) -> >IRQ 21 >> uhci_hcd 0000:00:10.2: UHCI Host Controller >> uhci_hcd 0000:00:10.2: new USB bus registered, assigned bus number 3 >> uhci_hcd 0000:00:10.2: irq 21, io base 0x00001c40 >> usb usb3: configuration #1 chosen from 1 choice >> hub 3-0:1.0: USB hub found >> hub 3-0:1.0: 2 ports detected >> pnp: the driver 'serial' has been registered >> 00:09: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A >> serial 00:09: driver attached >> ACPI: PCI Interrupt 0000:00:10.3[D] -> Link [ALKD] -> GSI 21 (level, low) -> >IRQ 21 >> ehci_hcd 0000:00:10.3: EHCI Host Controller >> ehci_hcd 0000:00:10.3: new USB bus registered, assigned bus number 4 >> ehci_hcd 0000:00:10.3: irq 21, io mem 0xd0004400 >> ehci_hcd 0000:00:10.3: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 >> usb usb4: configuration #1 chosen from 1 choice >> hub 4-0:1.0: USB hub found >> hub 4-0:1.0: 6 ports detected >> cs: IO port probe 0x100-0x4ff: clean. >> cs: IO port probe 0x800-0x8ff: clean. >> cs: IO port probe 0xc00-0xcff: clean. >> cs: IO port probe 0xa00-0xaff: clean. >> ACPI: PCI Interrupt Link [ALKC] disabled and referenced, BIOS bug >> ACPI: PCI Interrupt Link [ALKC] BIOS reported IRQ 0, using IRQ 22 >> ACPI: PCI Interrupt Link [ALKC] enabled at IRQ 22 >> ACPI: PCI Interrupt 0000:00:11.6[C] -> Link [ALKC] -> GSI 22 (level, low) -> >IRQ 22 >> PCI: Setting latency timer of device 0000:00:11.6 to 64 >> ACPI: PCI Interrupt 0000:00:11.5[C] -> Link [ALKC] -> GSI 22 (level, low) -> >IRQ 22 >> PCI: Setting latency timer of device 0000:00:11.5 to 64 >> Adding 1951888k swap on /dev/hda2. Priority:-1 extents:1 across:1951888k >> pnp: the driver 'i8042 kbd' has been registered >> i8042 kbd 00:08: driver attached >> pnp: the driver 'i8042 aux' has been registered >> i8042 aux 00:07: driver attached >> PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12 >> i8042.c: Detected active multiplexing controller, rev 1.1. >> serio: i8042 KBD port at 0x60,0x64 irq 1 >> serio: i8042 AUX0 port at 0x60,0x64 irq 12 >> serio: i8042 AUX1 port at 0x60,0x64 irq 12 >> serio: i8042 AUX2 port at 0x60,0x64 irq 12 >> serio: i8042 AUX3 port at 0x60,0x64 irq 12 >> input: AT Translated Set 2 keyboard as /class/input/input5 >> powernow-k8: Found 1 Mobile AMD Sempron(tm) Processor 2600+ processors (1 cpu >cores) (version 2.20.00) >> powernow-k8: 0 : fid 0x8 (1600 MHz), vid 0x6 >> powernow-k8: 1 : fid 0x0 (800 MHz), vid 0x18 >> powernow-k8: ph2 null fid transition 0x8 >> input: PS/2 Mouse as /class/input/input6 >> input: AlpsPS/2 ALPS GlidePoint as /class/input/input7 >> mice: PS/2 mouse device common for all mice >> Linux agpgart interface v0.103 >> [drm] Initialized drm 1.1.0 20060810 >> ACPI: PCI Interrupt 0000:01:00.0[A] -> GSI 16 (level, low) -> IRQ 16 >> [drm] Initialized via 2.11.1 20070202 on minor 0 >> leds_clevo_mail: 'Clevo D410J' found >> Registered led device: clevo::mail >> ACPI Exception (thermal-0514): AE_ERROR, ACPI thermal trip point state changed >> Please send acpidump to linux-acpi@vger.kernel.org >> [20070126] >> ReiserFS: hda1: found reiserfs format "3.6" with standard journal >> ReiserFS: hda1: using ordered data mode >> ReiserFS: hda1: journal params: device hda1, size 8192, journal first block >18, max trans len 1024, max batch 900, max commit age 30, max trans age 30 >> ReiserFS: hda1: checking transaction log (hda1) >> ReiserFS: hda1: Using r5 hash to sort names >> ip_tables: (C) 2000-2006 Netfilter Core Team >> eth0: link up, 100Mbps, full-duplex, lpa 0x41E1 >> NET: Registered protocol family 10 >> lp0: using parport0 (interrupt-driven). >> ppdev: user-space parallel port driver >> Clocksource tsc unstable (delta = -282353088 ns) >> eth0: no IPv6 routers present >> warning: `avahi-daemon' uses 32-bit capabilities (legacy support in use) >> irq 16: nobody cared (try booting with the "irqpoll" option) >> Pid: 0, comm: swapper Not tainted 2.6.25-rc4 #1 >> [<c0157227>] __report_bad_irq+0x27/0x90 >> [<c01574c6>] note_interrupt+0x236/0x270 >> [<c01568d3>] ? handle_IRQ_event+0x53/0x60 >> [<c0157b6a>] handle_fasteoi_irq+0x7a/0xd0 >> [<c0106174>] do_IRQ+0x44/0xa0 >> [<c0104c66>] common_interrupt+0x2e/0x34 >> [<c0301ac8>] ? _spin_unlock_irq+0x28/0x50 >> [<c0118974>] finish_task_switch+0x54/0xc0 >> [<c0118920>] ? finish_task_switch+0x0/0xc0 >> [<c02ff326>] schedule+0x2b6/0x470 >> [<f892fdae>] ? acpi_processor_idle+0x0/0x436 [processor] >> [<c0102b65>] cpu_idle+0xb5/0xd0 >> [<c02fa66c>] rest_init+0x5c/0x60 >> ======================= >> handlers: >> [<f8915830>] (yenta_interrupt+0x0/0xe0 [yenta_socket]) >> [<f8aee3f0>] (via_driver_irq_handler+0x0/0x1c0 [via]) >> Disabling IRQ #16 > >-- >To unsubscribe from this list: send the line "unsubscribe linux-acpi" in >the body of a message to majordomo@vger.kernel.org >More majordomo info at http://vger.kernel.org/majordomo-info.html -- To unsubscribe from this list: send the line "unsubscribe linux-acpi" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html ^ permalink raw reply [flat|nested] 18+ messages in thread
* Re: AE_ERROR, ACPI thermal trip point state changed 2008-03-06 8:05 ` Zhang, Rui @ 2008-03-07 6:54 ` Németh Márton 2008-03-07 7:19 ` Zhang, Rui 2008-03-07 7:24 ` Zhang, Rui 0 siblings, 2 replies; 18+ messages in thread From: Németh Márton @ 2008-03-07 6:54 UTC (permalink / raw) To: Zhang, Rui; +Cc: linux-acpi, LKML Hi, I downloaded pmtools from http://www.kernel.org/pub/linux/kernel/people/lenb/acpi/utils/pmtools-20071116.tar.bz2 and compiled: it created exactly the same result what my currently installed acpidump Debian package version 20071116-1. I think it is useless to send the same log again. After I boot the "Please send acpidump to linux-acpi@vger.kernel.org" message is already there. So when I first get the prompt I checked for this message in dmesg and executed the given command. Here is my result: # cat /proc/acpi/thermal_zone/*/* 0 - Active; 1 - Passive <polling disabled> state: ok temperature: 42 C critical (S5): 155 C passive: 84 C: tc1=2 tc2=5 tsp=0 devices=CPU0 active[0]: 70 C: devices= # ls /proc/acpi/thermal_zone/*/* /proc/acpi/thermal_zone/THRM/cooling_mode /proc/acpi/thermal_zone/THRM/polling_frequency /proc/acpi/thermal_zone/THRM/state /proc/acpi/thermal_zone/THRM/temperature /proc/acpi/thermal_zone/THRM/trip_points Maybe this is related to http://bugzilla.kernel.org/show_bug.cgi?id=8544 ? Márton Németh Zhang, Rui wrote: > Please attach the result of "cat /proc/acpi/thermal_zone/*/*" after this message is shown. > > Thanks, > rui > >> -----Original Message----- >> From: linux-acpi-owner@vger.kernel.org >> [mailto:linux-acpi-owner@vger.kernel.org] On Behalf Of Zhang, Rui >> Sent: Thursday, March 06, 2008 6:50 AM >> To: Németh Márton >> Cc: linux-acpi@vger.kernel.org; LKML >> Subject: Re: AE_ERROR, ACPI thermal trip point state changed >> >> hi, Márton, >> >> Please re-send the acpidump using the latest pmtools at >> http://www.kernel.org/pub/linux/kernel/people/lenb/acpi/utils/ >> >> thanks, >> rui >> >> On Thu, 2008-03-06 at 08:01 +0100, Németh Márton wrote: >>> Hi, >>> >>> in my dmesg the following lines appear with linux-2.6.25-rc4 on Clevo D410J >> laptop: >>> ACPI Exception (thermal-0514): AE_ERROR, ACPI thermal trip point state changed >>> Please send acpidump to linux-acpi@vger.kernel.org >>> [20070126] >>> >>> Should I do something else than sending the acpidump? >>> >>> Márton Németh >>> >>> >>> Németh Márton wrote: >>>> Hi, >>>> >>>> I get the following message from the kernel 2.6.25-rc1 on Clevo D410J laptop: >>>> >>>> ACPI Exception (thermal-0514): AE_ERROR, ACPI thermal trip point state >> changed >>>> Please send acpidump to linux-acpi@vger.kernel.org >>>> [20070126] >>>> >>>> So I am writing this email to you. >>>> >>>> Márton Németh >>> plain text document attachment (dmesg-2.6.25-rc4.txt) >>> Linux version 2.6.25-rc4 (nmarci@europa) (gcc version 4.2.3 20080114 >> (prerelease) (Debian 4.2.2-7)) #1 PREEMPT Wed Mar 5 21:34:08 CET 2008 >>> BIOS-provided physical RAM map: >>> BIOS-e820: 0000000000000000 - 000000000009f800 (usable) >>> BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved) >>> BIOS-e820: 00000000000d8000 - 0000000000100000 (reserved) >>> BIOS-e820: 0000000000100000 - 000000003bf70000 (usable) >>> BIOS-e820: 000000003bf70000 - 000000003bf7a000 (ACPI data) >>> BIOS-e820: 000000003bf7a000 - 000000003bf80000 (ACPI NVS) >>> BIOS-e820: 000000003bf80000 - 0000000040000000 (reserved) >>> BIOS-e820: 00000000fffe0000 - 0000000100000000 (reserved) >>> 63MB HIGHMEM available. >>> 896MB LOWMEM available. >>> Scan SMP from c0000000 for 1024 bytes. >>> Scan SMP from c009fc00 for 1024 bytes. >>> Scan SMP from c00f0000 for 65536 bytes. >>> found SMP MP-table at [c00f6870] 000f6870 >>> Entering add_active_range(0, 0, 245616) 0 entries of 256 used >>> Zone PFN ranges: >>> DMA 0 -> 4096 >>> Normal 4096 -> 229376 >>> HighMem 229376 -> 245616 >>> Movable zone start PFN for each node >>> early_node_map[1] active PFN ranges >>> 0: 0 -> 245616 >>> On node 0 totalpages: 245616 >>> DMA zone: 32 pages used for memmap >>> DMA zone: 0 pages reserved >>> DMA zone: 4064 pages, LIFO batch:0 >>> Normal zone: 1760 pages used for memmap >>> Normal zone: 223520 pages, LIFO batch:31 >>> HighMem zone: 126 pages used for memmap >>> HighMem zone: 16114 pages, LIFO batch:3 >>> Movable zone: 0 pages used for memmap >>> DMI present. >>> ACPI: RSDP 000F68D0, 0014 (r0 PTLTD ) >>> ACPI: RSDT 3BF7600B, 0030 (r1 PTLTD RSDT 6040000 LTP 0) >>> ACPI: FACP 3BF79E87, 0074 (r1 AMDK8 PTLTW 6040000 PTL_ F4240) >>> ACPI: DSDT 3BF7603B, 3E4C (r1 VIA PTL_ACPI 6040000 MSFT 100000E) >>> ACPI: FACS 3BF7AFC0, 0040 >>> ACPI: SSDT 3BF79EFB, 00B5 (r1 PTLTD POWERNOW 6040000 LTP 1) >>> ACPI: APIC 3BF79FB0, 0050 (r1 PTLTD APIC 6040000 LTP 0) >>> ACPI: PM-Timer IO Port: 0x4008 >>> ACPI: Local APIC address 0xfee00000 >>> ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) >>> Processor #0 15:12 APIC version 16 >>> ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) >>> ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0]) >>> IOAPIC[0]: apic_id 1, version 3, address 0xfec00000, GSI 0-23 >>> ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 high edge) >>> ACPI: IRQ0 used by override. >>> ACPI: IRQ2 used by override. >>> ACPI: IRQ10 used by override. >>> Enabling APIC mode: Flat. Using 1 I/O APICs >>> Using ACPI (MADT) for SMP configuration information >>> Allocating PCI resources starting at 50000000 (gap: 40000000:bffe0000) >>> PM: Registered nosave memory: 000000000009f000 - 00000000000a0000 >>> PM: Registered nosave memory: 00000000000a0000 - 00000000000d8000 >>> PM: Registered nosave memory: 00000000000d8000 - 0000000000100000 >>> Built 1 zonelists in Zone order, mobility grouping on. Total pages: 243698 >>> Kernel command line: root=/dev/hda3 ro log_buf_len=1M resume=/dev/hda2 >>> log_buf_len: 1048576 >>> mapped APIC to ffffb000 (fee00000) >>> mapped IOAPIC to ffffa000 (fec00000) >>> Enabling fast FPU save and restore... done. >>> Enabling unmasked SIMD FPU exception support... done. >>> Initializing CPU#0 >>> PID hash table entries: 4096 (order: 12, 16384 bytes) >>> Detected 1603.695 MHz processor. >>> Console: colour VGA+ 80x25 >>> console [tty0] enabled >>> Lock dependency validator: Copyright (c) 2006 Red Hat, Inc., Ingo Molnar >>> ... MAX_LOCKDEP_SUBCLASSES: 8 >>> ... MAX_LOCK_DEPTH: 48 >>> ... MAX_LOCKDEP_KEYS: 2048 >>> ... CLASSHASH_SIZE: 1024 >>> ... MAX_LOCKDEP_ENTRIES: 8192 >>> ... MAX_LOCKDEP_CHAINS: 16384 >>> ... CHAINHASH_SIZE: 8192 >>> memory used by lock dependency info: 992 kB >>> per task-struct memory footprint: 1920 bytes >>> ------------------------ >>> | Locking API testsuite: >>> >> --------------------------------------------------------------------------- >> - >>> | spin |wlock |rlock |mutex | wsem | rsem >> | >> -------------------------------------------------------------------------- >>> A-A deadlock: ok | ok | ok | ok | ok | ok >> | >>> A-B-B-A deadlock: ok | ok | ok | ok | ok | ok >> | >>> A-B-B-C-C-A deadlock: ok | ok | ok | ok | ok | ok >> | >>> A-B-C-A-B-C deadlock: ok | ok | ok | ok | ok | ok >> | >>> A-B-B-C-C-D-D-A deadlock: ok | ok | ok | ok | ok | ok >> | >>> A-B-C-D-B-D-D-A deadlock: ok | ok | ok | ok | ok | ok >> | >>> A-B-C-D-B-C-D-A deadlock: ok | ok | ok | ok | ok | ok >> | >>> double unlock: ok | ok | ok | ok | ok | ok >> | >>> initialize held: ok | ok | ok | ok | ok | ok >> | >>> bad unlock order: ok | ok | ok | ok | ok | ok >> | >> -------------------------------------------------------------------------- >>> recursive read-lock: | ok | | ok >> | >>> recursive read-lock #2: | ok | | ok >> | >>> mixed read-write-lock: | ok | | ok >> | >>> mixed write-read-lock: | ok | | ok >> | >> -------------------------------------------------------------------------- >>> hard-irqs-on + irq-safe-A/12: ok | ok | ok | >>> soft-irqs-on + irq-safe-A/12: ok | ok | ok | >>> hard-irqs-on + irq-safe-A/21: ok | ok | ok | >>> soft-irqs-on + irq-safe-A/21: ok | ok | ok | >>> sirq-safe-A => hirqs-on/12: ok | ok | ok | >>> sirq-safe-A => hirqs-on/21: ok | ok | ok | >>> hard-safe-A + irqs-on/12: ok | ok | ok | >>> soft-safe-A + irqs-on/12: ok | ok | ok | >>> hard-safe-A + irqs-on/21: ok | ok | ok | >>> soft-safe-A + irqs-on/21: ok | ok | ok | >>> hard-safe-A + unsafe-B #1/123: ok | ok | ok | >>> soft-safe-A + unsafe-B #1/123: ok | ok | ok | >>> hard-safe-A + unsafe-B #1/132: ok | ok | ok | >>> soft-safe-A + unsafe-B #1/132: ok | ok | ok | >>> hard-safe-A + unsafe-B #1/213: ok | ok | ok | >>> soft-safe-A + unsafe-B #1/213: ok | ok | ok | >>> hard-safe-A + unsafe-B #1/231: ok | ok | ok | >>> soft-safe-A + unsafe-B #1/231: ok | ok | ok | >>> hard-safe-A + unsafe-B #1/312: ok | ok | ok | >>> soft-safe-A + unsafe-B #1/312: ok | ok | ok | >>> hard-safe-A + unsafe-B #1/321: ok | ok | ok | >>> soft-safe-A + unsafe-B #1/321: ok | ok | ok | >>> hard-safe-A + unsafe-B #2/123: ok | ok | ok | >>> soft-safe-A + unsafe-B #2/123: ok | ok | ok | >>> hard-safe-A + unsafe-B #2/132: ok | ok | ok | >>> soft-safe-A + unsafe-B #2/132: ok | ok | ok | >>> hard-safe-A + unsafe-B #2/213: ok | ok | ok | >>> soft-safe-A + unsafe-B #2/213: ok | ok | ok | >>> hard-safe-A + unsafe-B #2/231: ok | ok | ok | >>> soft-safe-A + unsafe-B #2/231: ok | ok | ok | >>> hard-safe-A + unsafe-B #2/312: ok | ok | ok | >>> soft-safe-A + unsafe-B #2/312: ok | ok | ok | >>> hard-safe-A + unsafe-B #2/321: ok | ok | ok | >>> soft-safe-A + unsafe-B #2/321: ok | ok | ok | >>> hard-irq lock-inversion/123: ok | ok | ok | >>> soft-irq lock-inversion/123: ok | ok | ok | >>> hard-irq lock-inversion/132: ok | ok | ok | >>> soft-irq lock-inversion/132: ok | ok | ok | >>> hard-irq lock-inversion/213: ok | ok | ok | >>> soft-irq lock-inversion/213: ok | ok | ok | >>> hard-irq lock-inversion/231: ok | ok | ok | >>> soft-irq lock-inversion/231: ok | ok | ok | >>> hard-irq lock-inversion/312: ok | ok | ok | >>> soft-irq lock-inversion/312: ok | ok | ok | >>> hard-irq lock-inversion/321: ok | ok | ok | >>> soft-irq lock-inversion/321: ok | ok | ok | >>> hard-irq read-recursion/123: ok | >>> soft-irq read-recursion/123: ok | >>> hard-irq read-recursion/132: ok | >>> soft-irq read-recursion/132: ok | >>> hard-irq read-recursion/213: ok | >>> soft-irq read-recursion/213: ok | >>> hard-irq read-recursion/231: ok | >>> soft-irq read-recursion/231: ok | >>> hard-irq read-recursion/312: ok | >>> soft-irq read-recursion/312: ok | >>> hard-irq read-recursion/321: ok | >>> soft-irq read-recursion/321: ok | >>> ------------------------------------------------------- >>> Good, all 218 testcases passed! | >>> --------------------------------- >>> Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) >>> Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) >>> Memory: 966876k/982464k available (2071k kernel code, 15072k reserved, 891k >> data, 272k init, 64960k highmem) >>> virtual kernel memory layout: >>> fixmap : 0xfffa8000 - 0xfffff000 ( 348 kB) >>> pkmap : 0xff800000 - 0xffc00000 (4096 kB) >>> vmalloc : 0xf8800000 - 0xff7fe000 ( 111 MB) >>> lowmem : 0xc0000000 - 0xf8000000 ( 896 MB) >>> .init : 0xc03e8000 - 0xc042c000 ( 272 kB) >>> .data : 0xc0305c2b - 0xc03e4c18 ( 891 kB) >>> .text : 0xc0100000 - 0xc0305c2b (2071 kB) >>> Checking if this processor honours the WP bit even in supervisor mode...Ok. >>> CPA: page pool initialized 1 of 1 pages preallocated >>> Calibrating delay using timer specific routine.. 3210.53 BogoMIPS >> (lpj=1605269) >>> Mount-cache hash table entries: 512 >>> CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) >>> CPU: L2 Cache: 128K (64 bytes/line) >>> Intel machine check architecture supported. >>> Intel machine check reporting enabled on CPU#0. >>> Compat vDSO mapped to ffffe000. >>> CPU: AMD Mobile AMD Sempron(tm) Processor 2600+ stepping 00 >>> Checking 'hlt' instruction... OK. >>> Freeing SMP alternatives: 0k freed >>> ACPI: Core revision 20070126 >>> Parsing all Control Methods: >>> Table [DSDT](id 0001) - 480 Objects with 49 Devices 147 Methods 13 Regions >>> Parsing all Control Methods: >>> Table [SSDT](id 0002) - 3 Objects with 0 Devices 0 Methods 0 Regions >>> tbxface-0598 [00] tb_load_namespace : ACPI Tables successfully acquired >>> evxfevnt-0091 [00] enable : Transition to ACPI mode successful >>> ENABLING IO-APIC IRQs >>> ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=0 pin2=0 >>> net_namespace: 604 bytes >>> NET: Registered protocol family 16 >>> EISA bus registered >>> ACPI: bus type pci registered >>> PCI: PCI BIOS revision 2.10 entry at 0xfd88c, last bus=1 >>> PCI: Using configuration type 1 >>> Setting up standard PCI resources >>> evgpeblk-0956 [00] ev_create_gpe_block : GPE 00 to 0F [_GPE] 2 regs on int >> 0xA >>> evgpeblk-1052 [00] ev_initialize_gpe_bloc: Found 4 Wake, Enabled 0 Runtime >> GPEs in this block >>> ACPI: EC: Look up EC in DSDT >>> Completing Region/Field/Buffer/Package >> initialization:..................................................... >>> Initialized 11/13 Regions 1/1 Fields 23/24 Buffers 18/26 Packages (492 nodes) >>> Initializing Device/Processor/Thermal objects by executing _INI methods:. >>> Executed 1 _INI methods requiring 1 _STA executions (examined 53 objects) >>> ACPI: Interpreter enabled >>> ACPI: (supports S0 S3 S4 S5) >>> ACPI: Using IOAPIC for interrupt routing >>> ACPI: EC: non-query interrupt received, switching to interrupt mode >>> ACPI: EC: missing write data confirmation, don't expect it any longer. >>> ACPI: EC: GPE = 0xb, I/O: command/status = 0x66, data = 0x62 >>> ACPI: EC: driver started in interrupt mode >>> ACPI: PCI Root Bridge [PCI0] (0000:00) >>> pci 0000:00:11.0: quirk: region 4000-407f claimed by vt8235 PM >>> pci 0000:00:11.0: quirk: region 8100-810f claimed by vt8235 SMB >>> ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] >>> ACPI: PCI Interrupt Link [ALKA] (IRQs 16 17 18 19 20 21 22 23) *9, disabled. >>> ACPI: PCI Interrupt Link [ALKB] (IRQs 16 17 18 19 20 21 22 23) *11, disabled. >>> ACPI: PCI Interrupt Link [ALKC] (IRQs 22) *10, disabled. >>> ACPI: PCI Interrupt Link [ALKD] (IRQs 21) *5, disabled. >>> ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 7 *9 12 14 15) >>> ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 7 10 12 14 15) *11 >>> ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 7 11 12 14 15) *10 >>> ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 *5 7 9 10 11 12 14 15) >>> Linux Plug and Play Support v0.97 (c) Adam Belay >>> pnp: PnP ACPI init >>> ACPI: bus type pnp registered >>> pnp 00:00: Plug and Play ACPI device, IDs PNP0a03 (active) >>> pnp 00:01: Plug and Play ACPI device, IDs PNP0200 (active) >>> pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active) >>> pnp 00:03: Plug and Play ACPI device, IDs PNP0c04 (active) >>> pnp 00:04: Plug and Play ACPI device, IDs PNP0800 (active) >>> 00:05: calling quirk 0xc025ae70: quirk_supermicro_h8dce_system+0x0/0x110() >>> pnp 00:05: Plug and Play ACPI device, IDs PNP0c01 (active) >>> 00:06: calling quirk 0xc025ae70: quirk_supermicro_h8dce_system+0x0/0x110() >>> pnp 00:06: Plug and Play ACPI device, IDs PNP0c02 (active) >>> pnp 00:07: Plug and Play ACPI device, IDs PNP0f13 (active) >>> pnp 00:08: Plug and Play ACPI device, IDs PNP0303 (active) >>> pnp 00:09: Plug and Play ACPI device, IDs PNP0501 (active) >>> pnp 00:0a: Plug and Play ACPI device, IDs PNP0401 (active) >>> pnp: PnP ACPI: found 11 devices >>> ACPI: ACPI bus type pnp unregistered >>> PCI: Using ACPI for IRQ routing >>> PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report >>> pnp: the driver 'system' has been registered >>> system 00:05: iomem range 0x0-0x9ffff could not be reserved >>> system 00:05: iomem range 0xe0000-0xfffff could not be reserved >>> system 00:05: iomem range 0xfff00000-0xffffffff could not be reserved >>> system 00:05: iomem range 0xffee0000-0xffefffff has been reserved >>> system 00:05: iomem range 0xfec00000-0xfec00fff has been reserved >>> system 00:05: iomem range 0xfee00000-0xfee00fff has been reserved >>> system 00:05: driver attached >>> system 00:06: ioport range 0x4d0-0x4d1 has been reserved >>> system 00:06: ioport range 0xfe10-0xfe11 has been reserved >>> system 00:06: ioport range 0xfe00-0xfe00 has been reserved >>> system 00:06: ioport range 0x4000-0x407f has been reserved >>> system 00:06: ioport range 0x8100-0x811f could not be reserved >>> Time: tsc clocksource has been installed. >>> system 00:06: driver attached >>> PCI: Bridge: 0000:00:01.0 >>> IO window: disabled. >>> MEM window: 0xd1000000-0xd1ffffff >>> PREFETCH window: 0x00000000f0000000-0x00000000f3ffffff >>> PCI: Bus 2, cardbus bridge: 0000:00:0c.0 >>> IO window: 0x00002000-0x000020ff >>> IO window: 0x00002400-0x000024ff >>> PREFETCH window: 0x50000000-0x53ffffff >>> MEM window: 0x54000000-0x57ffffff >>> PCI: Setting latency timer of device 0000:00:01.0 to 64 >>> PCI: Enabling device 0000:00:0c.0 (0000 -> 0003) >>> ACPI: PCI Interrupt 0000:00:0c.0[A] -> GSI 16 (level, low) -> IRQ 16 >>> PCI: Setting latency timer of device 0000:00:0c.0 to 64 >>> NET: Registered protocol family 2 >>> IP route cache hash table entries: 32768 (order: 5, 131072 bytes) >>> TCP established hash table entries: 131072 (order: 8, 1048576 bytes) >>> TCP bind hash table entries: 65536 (order: 9, 2097152 bytes) >>> TCP: Hash tables configured (established 131072 bind 65536) >>> TCP reno registered >>> audit: initializing netlink socket (disabled) >>> type=2000 audit(1204788516.711:1): initialized >>> highmem bounce pool size: 64 pages >>> io scheduler noop registered >>> io scheduler cfq registered (default) >>> PCI: VIA PCI bridge detected. Disabling DAC. >>> pci 0000:01:00.0: Boot video device >>> isapnp: Scanning for PnP cards... >>> isapnp: No Plug & Play device found >>> Uniform Multi-Platform E-IDE driver >>> ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx >>> VP_IDE: IDE controller (0x1106:0x0571 rev 0x06) at PCI slot 0000:00:11.1 >>> ACPI: PCI Interrupt Link [ALKA] disabled and referenced, BIOS bug >>> ACPI: PCI Interrupt Link [ALKA] BIOS reported IRQ 0, using IRQ 23 >>> ACPI: PCI Interrupt Link [ALKA] enabled at IRQ 23 >>> ACPI: PCI Interrupt 0000:00:11.1[A] -> Link [ALKA] -> GSI 23 (level, low) -> >> IRQ 23 >>> VP_IDE: not 100% native mode: will probe irqs later >>> VP_IDE: VIA vt8235 (rev 00) IDE UDMA133 controller on pci0000:00:11.1 >>> ide0: BM-DMA at 0x1c60-0x1c67, BIOS settings: hda:DMA, hdb:PIO >>> ide1: BM-DMA at 0x1c68-0x1c6f, BIOS settings: hdc:DMA, hdd:PIO >>> Probing IDE interface ide0... >>> Switched to high resolution mode on CPU 0 >>> hdb: IRQ probe failed (0xfffffbfe) >>> hdb: IRQ probe failed (0xfffffbfe) >>> hda: SAMSUNG MP0804H, ATA DISK drive >>> hda: host max PIO5 wanted PIO255(auto-tune) selected PIO4 >>> hda: UDMA/100 mode selected >>> Probing IDE interface ide1... >>> hdc: Optiarc DVD RW AD-7543A, ATAPI CD/DVD-ROM drive >>> hdc: host max PIO5 wanted PIO255(auto-tune) selected PIO4 >>> hdc: UDMA/33 mode selected >>> ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 >>> ide1 at 0x170-0x177,0x376 on irq 15 >>> pnp: the driver 'ide' has been registered >>> hda: max request size: 512KiB >>> hda: 156368016 sectors (80060 MB) w/8192KiB Cache, CHS=16383/255/63 >>> hda: cache flushes supported >>> hda: hda1 hda2 hda3 >>> TCP cubic registered >>> NET: Registered protocol family 1 >>> NET: Registered protocol family 17 >>> Using IPI Shortcut mode >>> ReiserFS: hda3: found reiserfs format "3.6" with standard journal >>> ReiserFS: hda3: using ordered data mode >>> ReiserFS: hda3: journal params: device hda3, size 8192, journal first block >> 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30 >>> ReiserFS: hda3: checking transaction log (hda3) >>> ReiserFS: hda3: Using r5 hash to sort names >>> VFS: Mounted root (reiserfs filesystem) readonly. >>> Freeing unused kernel memory: 272k freed >>> Write protecting the kernel read-only data: 732k >>> ACPI: CPU0 (power states: C1[C1] C2[C2]) >>> ACPI: ACPI0007:00 is registered as cooling_device0 >>> input: Power Button (FF) as /class/input/input0 >>> ACPI: Power Button (FF) [PWRF] >>> input: Power Button (CM) as /class/input/input1 >>> ACPI: Power Button (CM) [PWB] >>> input: Sleep Button (CM) as /class/input/input2 >>> ACPI: Sleep Button (CM) [SLPB] >>> input: Lid Switch as /class/input/input3 >>> ACPI: Lid Switch [LID] >>> ACPI: LNXTHERM:01 is registered as thermal_zone0 >>> ACPI: Thermal Zone [THRM] (14 C) >>> ACPI: AC Adapter [AC] (on-line) >>> ACPI: Battery Slot [BAT0] (battery present) >>> Yenta: CardBus bridge found at 0000:00:0c.0 [1558:4702] >>> Yenta: Using CSCINT to route CSC interrupts to PCI >>> Yenta: Routing CardBus interrupts to PCI >>> Yenta TI: socket 0000:00:0c.0, mfunc 0x00001002, devctl 0x44 >>> 8139too Fast Ethernet driver 0.9.28 >>> hdc: ATAPI 24X DVD-ROM DVD-R-RAM CD-R/RW drive, 2048kB Cache >>> Uniform CD-ROM driver Revision: 3.20 >>> Yenta: ISA IRQ mask 0x0840, PCI irq 16 >>> Socket status: 30000006 >>> ACPI: PCI Interrupt 0000:00:08.0[A] -> GSI 19 (level, low) -> IRQ 19 >>> eth0: RealTek RTL8139 at 0xf88fa000, 00:90:f5:3e:5a:ca, IRQ 19 >>> eth0: Identified 8139 chip type 'RTL-8100B/8139D' >>> Marking TSC unstable due to: possible TSC halt in C2. >>> Time: acpi_pm clocksource has been installed. >>> usbcore: registered new interface driver usbfs >>> usbcore: registered new interface driver hub >>> usbcore: registered new device driver usb >>> input: PC Speaker as /class/input/input4 >>> pnp: the driver 'parport_pc' has been registered >>> parport_pc 00:0a: reported by Plug and Play ACPI >>> parport0: PC-style at 0x378 (0x778), irq 7, dma 1 >> [PCSPP,TRISTATE,COMPAT,ECP,DMA] >>> Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing disabled >>> serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A >>> Real Time Clock Driver v1.12ac >>> parport_pc 00:0a: driver attached >>> USB Universal Host Controller Interface driver v3.0 >>> ACPI: PCI Interrupt Link [ALKD] disabled and referenced, BIOS bug >>> ACPI: PCI Interrupt Link [ALKD] BIOS reported IRQ 0, using IRQ 21 >>> ACPI: PCI Interrupt Link [ALKD] enabled at IRQ 21 >>> ACPI: PCI Interrupt 0000:00:10.0[A] -> Link [ALKD] -> GSI 21 (level, low) -> >> IRQ 21 >>> uhci_hcd 0000:00:10.0: UHCI Host Controller >>> uhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 1 >>> uhci_hcd 0000:00:10.0: irq 21, io base 0x00001c00 >>> usb usb1: configuration #1 chosen from 1 choice >>> hub 1-0:1.0: USB hub found >>> hub 1-0:1.0: 2 ports detected >>> ACPI: PCI Interrupt 0000:00:10.1[B] -> Link [ALKD] -> GSI 21 (level, low) -> >> IRQ 21 >>> uhci_hcd 0000:00:10.1: UHCI Host Controller >>> uhci_hcd 0000:00:10.1: new USB bus registered, assigned bus number 2 >>> uhci_hcd 0000:00:10.1: irq 21, io base 0x00001c20 >>> usb usb2: configuration #1 chosen from 1 choice >>> hub 2-0:1.0: USB hub found >>> hub 2-0:1.0: 2 ports detected >>> ACPI: PCI Interrupt 0000:00:10.2[C] -> Link [ALKD] -> GSI 21 (level, low) -> >> IRQ 21 >>> uhci_hcd 0000:00:10.2: UHCI Host Controller >>> uhci_hcd 0000:00:10.2: new USB bus registered, assigned bus number 3 >>> uhci_hcd 0000:00:10.2: irq 21, io base 0x00001c40 >>> usb usb3: configuration #1 chosen from 1 choice >>> hub 3-0:1.0: USB hub found >>> hub 3-0:1.0: 2 ports detected >>> pnp: the driver 'serial' has been registered >>> 00:09: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A >>> serial 00:09: driver attached >>> ACPI: PCI Interrupt 0000:00:10.3[D] -> Link [ALKD] -> GSI 21 (level, low) -> >> IRQ 21 >>> ehci_hcd 0000:00:10.3: EHCI Host Controller >>> ehci_hcd 0000:00:10.3: new USB bus registered, assigned bus number 4 >>> ehci_hcd 0000:00:10.3: irq 21, io mem 0xd0004400 >>> ehci_hcd 0000:00:10.3: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 >>> usb usb4: configuration #1 chosen from 1 choice >>> hub 4-0:1.0: USB hub found >>> hub 4-0:1.0: 6 ports detected >>> cs: IO port probe 0x100-0x4ff: clean. >>> cs: IO port probe 0x800-0x8ff: clean. >>> cs: IO port probe 0xc00-0xcff: clean. >>> cs: IO port probe 0xa00-0xaff: clean. >>> ACPI: PCI Interrupt Link [ALKC] disabled and referenced, BIOS bug >>> ACPI: PCI Interrupt Link [ALKC] BIOS reported IRQ 0, using IRQ 22 >>> ACPI: PCI Interrupt Link [ALKC] enabled at IRQ 22 >>> ACPI: PCI Interrupt 0000:00:11.6[C] -> Link [ALKC] -> GSI 22 (level, low) -> >> IRQ 22 >>> PCI: Setting latency timer of device 0000:00:11.6 to 64 >>> ACPI: PCI Interrupt 0000:00:11.5[C] -> Link [ALKC] -> GSI 22 (level, low) -> >> IRQ 22 >>> PCI: Setting latency timer of device 0000:00:11.5 to 64 >>> Adding 1951888k swap on /dev/hda2. Priority:-1 extents:1 across:1951888k >>> pnp: the driver 'i8042 kbd' has been registered >>> i8042 kbd 00:08: driver attached >>> pnp: the driver 'i8042 aux' has been registered >>> i8042 aux 00:07: driver attached >>> PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12 >>> i8042.c: Detected active multiplexing controller, rev 1.1. >>> serio: i8042 KBD port at 0x60,0x64 irq 1 >>> serio: i8042 AUX0 port at 0x60,0x64 irq 12 >>> serio: i8042 AUX1 port at 0x60,0x64 irq 12 >>> serio: i8042 AUX2 port at 0x60,0x64 irq 12 >>> serio: i8042 AUX3 port at 0x60,0x64 irq 12 >>> input: AT Translated Set 2 keyboard as /class/input/input5 >>> powernow-k8: Found 1 Mobile AMD Sempron(tm) Processor 2600+ processors (1 cpu >> cores) (version 2.20.00) >>> powernow-k8: 0 : fid 0x8 (1600 MHz), vid 0x6 >>> powernow-k8: 1 : fid 0x0 (800 MHz), vid 0x18 >>> powernow-k8: ph2 null fid transition 0x8 >>> input: PS/2 Mouse as /class/input/input6 >>> input: AlpsPS/2 ALPS GlidePoint as /class/input/input7 >>> mice: PS/2 mouse device common for all mice >>> Linux agpgart interface v0.103 >>> [drm] Initialized drm 1.1.0 20060810 >>> ACPI: PCI Interrupt 0000:01:00.0[A] -> GSI 16 (level, low) -> IRQ 16 >>> [drm] Initialized via 2.11.1 20070202 on minor 0 >>> leds_clevo_mail: 'Clevo D410J' found >>> Registered led device: clevo::mail >>> ACPI Exception (thermal-0514): AE_ERROR, ACPI thermal trip point state changed >>> Please send acpidump to linux-acpi@vger.kernel.org >>> [20070126] >>> ReiserFS: hda1: found reiserfs format "3.6" with standard journal >>> ReiserFS: hda1: using ordered data mode >>> ReiserFS: hda1: journal params: device hda1, size 8192, journal first block >> 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30 >>> ReiserFS: hda1: checking transaction log (hda1) >>> ReiserFS: hda1: Using r5 hash to sort names >>> ip_tables: (C) 2000-2006 Netfilter Core Team >>> eth0: link up, 100Mbps, full-duplex, lpa 0x41E1 >>> NET: Registered protocol family 10 >>> lp0: using parport0 (interrupt-driven). >>> ppdev: user-space parallel port driver >>> Clocksource tsc unstable (delta = -282353088 ns) >>> eth0: no IPv6 routers present >>> warning: `avahi-daemon' uses 32-bit capabilities (legacy support in use) >>> irq 16: nobody cared (try booting with the "irqpoll" option) >>> Pid: 0, comm: swapper Not tainted 2.6.25-rc4 #1 >>> [<c0157227>] __report_bad_irq+0x27/0x90 >>> [<c01574c6>] note_interrupt+0x236/0x270 >>> [<c01568d3>] ? handle_IRQ_event+0x53/0x60 >>> [<c0157b6a>] handle_fasteoi_irq+0x7a/0xd0 >>> [<c0106174>] do_IRQ+0x44/0xa0 >>> [<c0104c66>] common_interrupt+0x2e/0x34 >>> [<c0301ac8>] ? _spin_unlock_irq+0x28/0x50 >>> [<c0118974>] finish_task_switch+0x54/0xc0 >>> [<c0118920>] ? finish_task_switch+0x0/0xc0 >>> [<c02ff326>] schedule+0x2b6/0x470 >>> [<f892fdae>] ? acpi_processor_idle+0x0/0x436 [processor] >>> [<c0102b65>] cpu_idle+0xb5/0xd0 >>> [<c02fa66c>] rest_init+0x5c/0x60 >>> ======================= >>> handlers: >>> [<f8915830>] (yenta_interrupt+0x0/0xe0 [yenta_socket]) >>> [<f8aee3f0>] (via_driver_irq_handler+0x0/0x1c0 [via]) >>> Disabling IRQ #16 >> -- >> To unsubscribe from this list: send the line "unsubscribe linux-acpi" in >> the body of a message to majordomo@vger.kernel.org >> More majordomo info at http://vger.kernel.org/majordomo-info.html > > ^ permalink raw reply [flat|nested] 18+ messages in thread
* RE: AE_ERROR, ACPI thermal trip point state changed 2008-03-07 6:54 ` Németh Márton @ 2008-03-07 7:19 ` Zhang, Rui 2008-03-07 7:24 ` Zhang, Rui 1 sibling, 0 replies; 18+ messages in thread From: Zhang, Rui @ 2008-03-07 7:19 UTC (permalink / raw) To: Németh Márton; +Cc: linux-acpi, LKML [-- Attachment #1: Type: text/plain, Size: 30761 bytes --] Please try this debug patch and attach the dmesg output. :) Thanks, rui >-----Original Message----- >From: linux-acpi-owner@vger.kernel.org >[mailto:linux-acpi-owner@vger.kernel.org] On Behalf Of Németh Márton >Sent: Friday, March 07, 2008 2:54 PM >To: Zhang, Rui >Cc: linux-acpi@vger.kernel.org; LKML >Subject: Re: AE_ERROR, ACPI thermal trip point state changed > >Hi, > >I downloaded pmtools from >http://www.kernel.org/pub/linux/kernel/people/lenb/acpi/utils/pmtools-20071 >116.tar.bz2 and >compiled: it created exactly the same result what my currently installed >acpidump Debian >package version 20071116-1. I think it is useless to send the same log again. > >After I boot the "Please send acpidump to linux-acpi@vger.kernel.org" message >is already >there. So when I first get the prompt I checked for this message in dmesg and >executed >the given command. Here is my result: > ># cat /proc/acpi/thermal_zone/*/* >0 - Active; 1 - Passive ><polling disabled> >state: ok >temperature: 42 C >critical (S5): 155 C >passive: 84 C: tc1=2 tc2=5 tsp=0 devices=CPU0 >active[0]: 70 C: devices= ># ls /proc/acpi/thermal_zone/*/* >/proc/acpi/thermal_zone/THRM/cooling_mode >/proc/acpi/thermal_zone/THRM/polling_frequency >/proc/acpi/thermal_zone/THRM/state >/proc/acpi/thermal_zone/THRM/temperature >/proc/acpi/thermal_zone/THRM/trip_points > >Maybe this is related to http://bugzilla.kernel.org/show_bug.cgi?id=8544 ? > > Márton Németh > >Zhang, Rui wrote: >> Please attach the result of "cat /proc/acpi/thermal_zone/*/*" after this >message is shown. >> >> Thanks, >> rui >> >>> -----Original Message----- >>> From: linux-acpi-owner@vger.kernel.org >>> [mailto:linux-acpi-owner@vger.kernel.org] On Behalf Of Zhang, Rui >>> Sent: Thursday, March 06, 2008 6:50 AM >>> To: Németh Márton >>> Cc: linux-acpi@vger.kernel.org; LKML >>> Subject: Re: AE_ERROR, ACPI thermal trip point state changed >>> >>> hi, Márton, >>> >>> Please re-send the acpidump using the latest pmtools at >>> http://www.kernel.org/pub/linux/kernel/people/lenb/acpi/utils/ >>> >>> thanks, >>> rui >>> >>> On Thu, 2008-03-06 at 08:01 +0100, Németh Márton wrote: >>>> Hi, >>>> >>>> in my dmesg the following lines appear with linux-2.6.25-rc4 on Clevo D410J >>> laptop: >>>> ACPI Exception (thermal-0514): AE_ERROR, ACPI thermal trip point state >changed >>>> Please send acpidump to linux-acpi@vger.kernel.org >>>> [20070126] >>>> >>>> Should I do something else than sending the acpidump? >>>> >>>> Márton Németh >>>> >>>> >>>> Németh Márton wrote: >>>>> Hi, >>>>> >>>>> I get the following message from the kernel 2.6.25-rc1 on Clevo D410J >laptop: >>>>> >>>>> ACPI Exception (thermal-0514): AE_ERROR, ACPI thermal trip point state >>> changed >>>>> Please send acpidump to linux-acpi@vger.kernel.org >>>>> [20070126] >>>>> >>>>> So I am writing this email to you. >>>>> >>>>> Márton Németh >>>> plain text document attachment (dmesg-2.6.25-rc4.txt) >>>> Linux version 2.6.25-rc4 (nmarci@europa) (gcc version 4.2.3 20080114 >>> (prerelease) (Debian 4.2.2-7)) #1 PREEMPT Wed Mar 5 21:34:08 CET 2008 >>>> BIOS-provided physical RAM map: >>>> BIOS-e820: 0000000000000000 - 000000000009f800 (usable) >>>> BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved) >>>> BIOS-e820: 00000000000d8000 - 0000000000100000 (reserved) >>>> BIOS-e820: 0000000000100000 - 000000003bf70000 (usable) >>>> BIOS-e820: 000000003bf70000 - 000000003bf7a000 (ACPI data) >>>> BIOS-e820: 000000003bf7a000 - 000000003bf80000 (ACPI NVS) >>>> BIOS-e820: 000000003bf80000 - 0000000040000000 (reserved) >>>> BIOS-e820: 00000000fffe0000 - 0000000100000000 (reserved) >>>> 63MB HIGHMEM available. >>>> 896MB LOWMEM available. >>>> Scan SMP from c0000000 for 1024 bytes. >>>> Scan SMP from c009fc00 for 1024 bytes. >>>> Scan SMP from c00f0000 for 65536 bytes. >>>> found SMP MP-table at [c00f6870] 000f6870 >>>> Entering add_active_range(0, 0, 245616) 0 entries of 256 used >>>> Zone PFN ranges: >>>> DMA 0 -> 4096 >>>> Normal 4096 -> 229376 >>>> HighMem 229376 -> 245616 >>>> Movable zone start PFN for each node >>>> early_node_map[1] active PFN ranges >>>> 0: 0 -> 245616 >>>> On node 0 totalpages: 245616 >>>> DMA zone: 32 pages used for memmap >>>> DMA zone: 0 pages reserved >>>> DMA zone: 4064 pages, LIFO batch:0 >>>> Normal zone: 1760 pages used for memmap >>>> Normal zone: 223520 pages, LIFO batch:31 >>>> HighMem zone: 126 pages used for memmap >>>> HighMem zone: 16114 pages, LIFO batch:3 >>>> Movable zone: 0 pages used for memmap >>>> DMI present. >>>> ACPI: RSDP 000F68D0, 0014 (r0 PTLTD ) >>>> ACPI: RSDT 3BF7600B, 0030 (r1 PTLTD RSDT 6040000 LTP 0) >>>> ACPI: FACP 3BF79E87, 0074 (r1 AMDK8 PTLTW 6040000 PTL_ F4240) >>>> ACPI: DSDT 3BF7603B, 3E4C (r1 VIA PTL_ACPI 6040000 MSFT 100000E) >>>> ACPI: FACS 3BF7AFC0, 0040 >>>> ACPI: SSDT 3BF79EFB, 00B5 (r1 PTLTD POWERNOW 6040000 LTP 1) >>>> ACPI: APIC 3BF79FB0, 0050 (r1 PTLTD APIC 6040000 LTP 0) >>>> ACPI: PM-Timer IO Port: 0x4008 >>>> ACPI: Local APIC address 0xfee00000 >>>> ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) >>>> Processor #0 15:12 APIC version 16 >>>> ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) >>>> ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0]) >>>> IOAPIC[0]: apic_id 1, version 3, address 0xfec00000, GSI 0-23 >>>> ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 high edge) >>>> ACPI: IRQ0 used by override. >>>> ACPI: IRQ2 used by override. >>>> ACPI: IRQ10 used by override. >>>> Enabling APIC mode: Flat. Using 1 I/O APICs >>>> Using ACPI (MADT) for SMP configuration information >>>> Allocating PCI resources starting at 50000000 (gap: 40000000:bffe0000) >>>> PM: Registered nosave memory: 000000000009f000 - 00000000000a0000 >>>> PM: Registered nosave memory: 00000000000a0000 - 00000000000d8000 >>>> PM: Registered nosave memory: 00000000000d8000 - 0000000000100000 >>>> Built 1 zonelists in Zone order, mobility grouping on. Total pages: 243698 >>>> Kernel command line: root=/dev/hda3 ro log_buf_len=1M resume=/dev/hda2 >>>> log_buf_len: 1048576 >>>> mapped APIC to ffffb000 (fee00000) >>>> mapped IOAPIC to ffffa000 (fec00000) >>>> Enabling fast FPU save and restore... done. >>>> Enabling unmasked SIMD FPU exception support... done. >>>> Initializing CPU#0 >>>> PID hash table entries: 4096 (order: 12, 16384 bytes) >>>> Detected 1603.695 MHz processor. >>>> Console: colour VGA+ 80x25 >>>> console [tty0] enabled >>>> Lock dependency validator: Copyright (c) 2006 Red Hat, Inc., Ingo Molnar >>>> ... MAX_LOCKDEP_SUBCLASSES: 8 >>>> ... MAX_LOCK_DEPTH: 48 >>>> ... MAX_LOCKDEP_KEYS: 2048 >>>> ... CLASSHASH_SIZE: 1024 >>>> ... MAX_LOCKDEP_ENTRIES: 8192 >>>> ... MAX_LOCKDEP_CHAINS: 16384 >>>> ... CHAINHASH_SIZE: 8192 >>>> memory used by lock dependency info: 992 kB >>>> per task-struct memory footprint: 1920 bytes >>>> ------------------------ >>>> | Locking API testsuite: >>>> >>> >--------------------------------------------------------------------------- >>> - >>>> | spin |wlock |rlock |mutex | wsem | rsem >>> | >>> >-------------------------------------------------------------------------- >>>> A-A deadlock: ok | ok | ok | ok | ok | >ok >>> | >>>> A-B-B-A deadlock: ok | ok | ok | ok | ok | >ok >>> | >>>> A-B-B-C-C-A deadlock: ok | ok | ok | ok | ok | >ok >>> | >>>> A-B-C-A-B-C deadlock: ok | ok | ok | ok | ok | >ok >>> | >>>> A-B-B-C-C-D-D-A deadlock: ok | ok | ok | ok | ok | >ok >>> | >>>> A-B-C-D-B-D-D-A deadlock: ok | ok | ok | ok | ok | >ok >>> | >>>> A-B-C-D-B-C-D-A deadlock: ok | ok | ok | ok | ok | >ok >>> | >>>> double unlock: ok | ok | ok | ok | ok | >ok >>> | >>>> initialize held: ok | ok | ok | ok | ok | >ok >>> | >>>> bad unlock order: ok | ok | ok | ok | ok | >ok >>> | >>> >-------------------------------------------------------------------------- >>>> recursive read-lock: | ok | | >ok >>> | >>>> recursive read-lock #2: | ok | | >ok >>> | >>>> mixed read-write-lock: | ok | | >ok >>> | >>>> mixed write-read-lock: | ok | | >ok >>> | >>> >-------------------------------------------------------------------------- >>>> hard-irqs-on + irq-safe-A/12: ok | ok | ok | >>>> soft-irqs-on + irq-safe-A/12: ok | ok | ok | >>>> hard-irqs-on + irq-safe-A/21: ok | ok | ok | >>>> soft-irqs-on + irq-safe-A/21: ok | ok | ok | >>>> sirq-safe-A => hirqs-on/12: ok | ok | ok | >>>> sirq-safe-A => hirqs-on/21: ok | ok | ok | >>>> hard-safe-A + irqs-on/12: ok | ok | ok | >>>> soft-safe-A + irqs-on/12: ok | ok | ok | >>>> hard-safe-A + irqs-on/21: ok | ok | ok | >>>> soft-safe-A + irqs-on/21: ok | ok | ok | >>>> hard-safe-A + unsafe-B #1/123: ok | ok | ok | >>>> soft-safe-A + unsafe-B #1/123: ok | ok | ok | >>>> hard-safe-A + unsafe-B #1/132: ok | ok | ok | >>>> soft-safe-A + unsafe-B #1/132: ok | ok | ok | >>>> hard-safe-A + unsafe-B #1/213: ok | ok | ok | >>>> soft-safe-A + unsafe-B #1/213: ok | ok | ok | >>>> hard-safe-A + unsafe-B #1/231: ok | ok | ok | >>>> soft-safe-A + unsafe-B #1/231: ok | ok | ok | >>>> hard-safe-A + unsafe-B #1/312: ok | ok | ok | >>>> soft-safe-A + unsafe-B #1/312: ok | ok | ok | >>>> hard-safe-A + unsafe-B #1/321: ok | ok | ok | >>>> soft-safe-A + unsafe-B #1/321: ok | ok | ok | >>>> hard-safe-A + unsafe-B #2/123: ok | ok | ok | >>>> soft-safe-A + unsafe-B #2/123: ok | ok | ok | >>>> hard-safe-A + unsafe-B #2/132: ok | ok | ok | >>>> soft-safe-A + unsafe-B #2/132: ok | ok | ok | >>>> hard-safe-A + unsafe-B #2/213: ok | ok | ok | >>>> soft-safe-A + unsafe-B #2/213: ok | ok | ok | >>>> hard-safe-A + unsafe-B #2/231: ok | ok | ok | >>>> soft-safe-A + unsafe-B #2/231: ok | ok | ok | >>>> hard-safe-A + unsafe-B #2/312: ok | ok | ok | >>>> soft-safe-A + unsafe-B #2/312: ok | ok | ok | >>>> hard-safe-A + unsafe-B #2/321: ok | ok | ok | >>>> soft-safe-A + unsafe-B #2/321: ok | ok | ok | >>>> hard-irq lock-inversion/123: ok | ok | ok | >>>> soft-irq lock-inversion/123: ok | ok | ok | >>>> hard-irq lock-inversion/132: ok | ok | ok | >>>> soft-irq lock-inversion/132: ok | ok | ok | >>>> hard-irq lock-inversion/213: ok | ok | ok | >>>> soft-irq lock-inversion/213: ok | ok | ok | >>>> hard-irq lock-inversion/231: ok | ok | ok | >>>> soft-irq lock-inversion/231: ok | ok | ok | >>>> hard-irq lock-inversion/312: ok | ok | ok | >>>> soft-irq lock-inversion/312: ok | ok | ok | >>>> hard-irq lock-inversion/321: ok | ok | ok | >>>> soft-irq lock-inversion/321: ok | ok | ok | >>>> hard-irq read-recursion/123: ok | >>>> soft-irq read-recursion/123: ok | >>>> hard-irq read-recursion/132: ok | >>>> soft-irq read-recursion/132: ok | >>>> hard-irq read-recursion/213: ok | >>>> soft-irq read-recursion/213: ok | >>>> hard-irq read-recursion/231: ok | >>>> soft-irq read-recursion/231: ok | >>>> hard-irq read-recursion/312: ok | >>>> soft-irq read-recursion/312: ok | >>>> hard-irq read-recursion/321: ok | >>>> soft-irq read-recursion/321: ok | >>>> ------------------------------------------------------- >>>> Good, all 218 testcases passed! | >>>> --------------------------------- >>>> Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) >>>> Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) >>>> Memory: 966876k/982464k available (2071k kernel code, 15072k reserved, 891k >>> data, 272k init, 64960k highmem) >>>> virtual kernel memory layout: >>>> fixmap : 0xfffa8000 - 0xfffff000 ( 348 kB) >>>> pkmap : 0xff800000 - 0xffc00000 (4096 kB) >>>> vmalloc : 0xf8800000 - 0xff7fe000 ( 111 MB) >>>> lowmem : 0xc0000000 - 0xf8000000 ( 896 MB) >>>> .init : 0xc03e8000 - 0xc042c000 ( 272 kB) >>>> .data : 0xc0305c2b - 0xc03e4c18 ( 891 kB) >>>> .text : 0xc0100000 - 0xc0305c2b (2071 kB) >>>> Checking if this processor honours the WP bit even in supervisor mode...Ok. >>>> CPA: page pool initialized 1 of 1 pages preallocated >>>> Calibrating delay using timer specific routine.. 3210.53 BogoMIPS >>> (lpj=1605269) >>>> Mount-cache hash table entries: 512 >>>> CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) >>>> CPU: L2 Cache: 128K (64 bytes/line) >>>> Intel machine check architecture supported. >>>> Intel machine check reporting enabled on CPU#0. >>>> Compat vDSO mapped to ffffe000. >>>> CPU: AMD Mobile AMD Sempron(tm) Processor 2600+ stepping 00 >>>> Checking 'hlt' instruction... OK. >>>> Freeing SMP alternatives: 0k freed >>>> ACPI: Core revision 20070126 >>>> Parsing all Control Methods: >>>> Table [DSDT](id 0001) - 480 Objects with 49 Devices 147 Methods 13 Regions >>>> Parsing all Control Methods: >>>> Table [SSDT](id 0002) - 3 Objects with 0 Devices 0 Methods 0 Regions >>>> tbxface-0598 [00] tb_load_namespace : ACPI Tables successfully >acquired >>>> evxfevnt-0091 [00] enable : Transition to ACPI mode >successful >>>> ENABLING IO-APIC IRQs >>>> ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=0 pin2=0 >>>> net_namespace: 604 bytes >>>> NET: Registered protocol family 16 >>>> EISA bus registered >>>> ACPI: bus type pci registered >>>> PCI: PCI BIOS revision 2.10 entry at 0xfd88c, last bus=1 >>>> PCI: Using configuration type 1 >>>> Setting up standard PCI resources >>>> evgpeblk-0956 [00] ev_create_gpe_block : GPE 00 to 0F [_GPE] 2 regs on >int >>> 0xA >>>> evgpeblk-1052 [00] ev_initialize_gpe_bloc: Found 4 Wake, Enabled 0 Runtime >>> GPEs in this block >>>> ACPI: EC: Look up EC in DSDT >>>> Completing Region/Field/Buffer/Package >>> initialization:..................................................... >>>> Initialized 11/13 Regions 1/1 Fields 23/24 Buffers 18/26 Packages (492 >nodes) >>>> Initializing Device/Processor/Thermal objects by executing _INI methods:. >>>> Executed 1 _INI methods requiring 1 _STA executions (examined 53 objects) >>>> ACPI: Interpreter enabled >>>> ACPI: (supports S0 S3 S4 S5) >>>> ACPI: Using IOAPIC for interrupt routing >>>> ACPI: EC: non-query interrupt received, switching to interrupt mode >>>> ACPI: EC: missing write data confirmation, don't expect it any longer. >>>> ACPI: EC: GPE = 0xb, I/O: command/status = 0x66, data = 0x62 >>>> ACPI: EC: driver started in interrupt mode >>>> ACPI: PCI Root Bridge [PCI0] (0000:00) >>>> pci 0000:00:11.0: quirk: region 4000-407f claimed by vt8235 PM >>>> pci 0000:00:11.0: quirk: region 8100-810f claimed by vt8235 SMB >>>> ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] >>>> ACPI: PCI Interrupt Link [ALKA] (IRQs 16 17 18 19 20 21 22 23) *9, disabled. >>>> ACPI: PCI Interrupt Link [ALKB] (IRQs 16 17 18 19 20 21 22 23) *11, disabled. >>>> ACPI: PCI Interrupt Link [ALKC] (IRQs 22) *10, disabled. >>>> ACPI: PCI Interrupt Link [ALKD] (IRQs 21) *5, disabled. >>>> ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 7 *9 12 14 15) >>>> ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 7 10 12 14 15) *11 >>>> ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 7 11 12 14 15) *10 >>>> ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 *5 7 9 10 11 12 14 15) >>>> Linux Plug and Play Support v0.97 (c) Adam Belay >>>> pnp: PnP ACPI init >>>> ACPI: bus type pnp registered >>>> pnp 00:00: Plug and Play ACPI device, IDs PNP0a03 (active) >>>> pnp 00:01: Plug and Play ACPI device, IDs PNP0200 (active) >>>> pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active) >>>> pnp 00:03: Plug and Play ACPI device, IDs PNP0c04 (active) >>>> pnp 00:04: Plug and Play ACPI device, IDs PNP0800 (active) >>>> 00:05: calling quirk 0xc025ae70: >quirk_supermicro_h8dce_system+0x0/0x110() >>>> pnp 00:05: Plug and Play ACPI device, IDs PNP0c01 (active) >>>> 00:06: calling quirk 0xc025ae70: >quirk_supermicro_h8dce_system+0x0/0x110() >>>> pnp 00:06: Plug and Play ACPI device, IDs PNP0c02 (active) >>>> pnp 00:07: Plug and Play ACPI device, IDs PNP0f13 (active) >>>> pnp 00:08: Plug and Play ACPI device, IDs PNP0303 (active) >>>> pnp 00:09: Plug and Play ACPI device, IDs PNP0501 (active) >>>> pnp 00:0a: Plug and Play ACPI device, IDs PNP0401 (active) >>>> pnp: PnP ACPI: found 11 devices >>>> ACPI: ACPI bus type pnp unregistered >>>> PCI: Using ACPI for IRQ routing >>>> PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a >report >>>> pnp: the driver 'system' has been registered >>>> system 00:05: iomem range 0x0-0x9ffff could not be reserved >>>> system 00:05: iomem range 0xe0000-0xfffff could not be reserved >>>> system 00:05: iomem range 0xfff00000-0xffffffff could not be reserved >>>> system 00:05: iomem range 0xffee0000-0xffefffff has been reserved >>>> system 00:05: iomem range 0xfec00000-0xfec00fff has been reserved >>>> system 00:05: iomem range 0xfee00000-0xfee00fff has been reserved >>>> system 00:05: driver attached >>>> system 00:06: ioport range 0x4d0-0x4d1 has been reserved >>>> system 00:06: ioport range 0xfe10-0xfe11 has been reserved >>>> system 00:06: ioport range 0xfe00-0xfe00 has been reserved >>>> system 00:06: ioport range 0x4000-0x407f has been reserved >>>> system 00:06: ioport range 0x8100-0x811f could not be reserved >>>> Time: tsc clocksource has been installed. >>>> system 00:06: driver attached >>>> PCI: Bridge: 0000:00:01.0 >>>> IO window: disabled. >>>> MEM window: 0xd1000000-0xd1ffffff >>>> PREFETCH window: 0x00000000f0000000-0x00000000f3ffffff >>>> PCI: Bus 2, cardbus bridge: 0000:00:0c.0 >>>> IO window: 0x00002000-0x000020ff >>>> IO window: 0x00002400-0x000024ff >>>> PREFETCH window: 0x50000000-0x53ffffff >>>> MEM window: 0x54000000-0x57ffffff >>>> PCI: Setting latency timer of device 0000:00:01.0 to 64 >>>> PCI: Enabling device 0000:00:0c.0 (0000 -> 0003) >>>> ACPI: PCI Interrupt 0000:00:0c.0[A] -> GSI 16 (level, low) -> IRQ 16 >>>> PCI: Setting latency timer of device 0000:00:0c.0 to 64 >>>> NET: Registered protocol family 2 >>>> IP route cache hash table entries: 32768 (order: 5, 131072 bytes) >>>> TCP established hash table entries: 131072 (order: 8, 1048576 bytes) >>>> TCP bind hash table entries: 65536 (order: 9, 2097152 bytes) >>>> TCP: Hash tables configured (established 131072 bind 65536) >>>> TCP reno registered >>>> audit: initializing netlink socket (disabled) >>>> type=2000 audit(1204788516.711:1): initialized >>>> highmem bounce pool size: 64 pages >>>> io scheduler noop registered >>>> io scheduler cfq registered (default) >>>> PCI: VIA PCI bridge detected. Disabling DAC. >>>> pci 0000:01:00.0: Boot video device >>>> isapnp: Scanning for PnP cards... >>>> isapnp: No Plug & Play device found >>>> Uniform Multi-Platform E-IDE driver >>>> ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx >>>> VP_IDE: IDE controller (0x1106:0x0571 rev 0x06) at PCI slot 0000:00:11.1 >>>> ACPI: PCI Interrupt Link [ALKA] disabled and referenced, BIOS bug >>>> ACPI: PCI Interrupt Link [ALKA] BIOS reported IRQ 0, using IRQ 23 >>>> ACPI: PCI Interrupt Link [ALKA] enabled at IRQ 23 >>>> ACPI: PCI Interrupt 0000:00:11.1[A] -> Link [ALKA] -> GSI 23 (level, low) >-> >>> IRQ 23 >>>> VP_IDE: not 100% native mode: will probe irqs later >>>> VP_IDE: VIA vt8235 (rev 00) IDE UDMA133 controller on pci0000:00:11.1 >>>> ide0: BM-DMA at 0x1c60-0x1c67, BIOS settings: hda:DMA, hdb:PIO >>>> ide1: BM-DMA at 0x1c68-0x1c6f, BIOS settings: hdc:DMA, hdd:PIO >>>> Probing IDE interface ide0... >>>> Switched to high resolution mode on CPU 0 >>>> hdb: IRQ probe failed (0xfffffbfe) >>>> hdb: IRQ probe failed (0xfffffbfe) >>>> hda: SAMSUNG MP0804H, ATA DISK drive >>>> hda: host max PIO5 wanted PIO255(auto-tune) selected PIO4 >>>> hda: UDMA/100 mode selected >>>> Probing IDE interface ide1... >>>> hdc: Optiarc DVD RW AD-7543A, ATAPI CD/DVD-ROM drive >>>> hdc: host max PIO5 wanted PIO255(auto-tune) selected PIO4 >>>> hdc: UDMA/33 mode selected >>>> ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 >>>> ide1 at 0x170-0x177,0x376 on irq 15 >>>> pnp: the driver 'ide' has been registered >>>> hda: max request size: 512KiB >>>> hda: 156368016 sectors (80060 MB) w/8192KiB Cache, CHS=16383/255/63 >>>> hda: cache flushes supported >>>> hda: hda1 hda2 hda3 >>>> TCP cubic registered >>>> NET: Registered protocol family 1 >>>> NET: Registered protocol family 17 >>>> Using IPI Shortcut mode >>>> ReiserFS: hda3: found reiserfs format "3.6" with standard journal >>>> ReiserFS: hda3: using ordered data mode >>>> ReiserFS: hda3: journal params: device hda3, size 8192, journal first block >>> 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30 >>>> ReiserFS: hda3: checking transaction log (hda3) >>>> ReiserFS: hda3: Using r5 hash to sort names >>>> VFS: Mounted root (reiserfs filesystem) readonly. >>>> Freeing unused kernel memory: 272k freed >>>> Write protecting the kernel read-only data: 732k >>>> ACPI: CPU0 (power states: C1[C1] C2[C2]) >>>> ACPI: ACPI0007:00 is registered as cooling_device0 >>>> input: Power Button (FF) as /class/input/input0 >>>> ACPI: Power Button (FF) [PWRF] >>>> input: Power Button (CM) as /class/input/input1 >>>> ACPI: Power Button (CM) [PWB] >>>> input: Sleep Button (CM) as /class/input/input2 >>>> ACPI: Sleep Button (CM) [SLPB] >>>> input: Lid Switch as /class/input/input3 >>>> ACPI: Lid Switch [LID] >>>> ACPI: LNXTHERM:01 is registered as thermal_zone0 >>>> ACPI: Thermal Zone [THRM] (14 C) >>>> ACPI: AC Adapter [AC] (on-line) >>>> ACPI: Battery Slot [BAT0] (battery present) >>>> Yenta: CardBus bridge found at 0000:00:0c.0 [1558:4702] >>>> Yenta: Using CSCINT to route CSC interrupts to PCI >>>> Yenta: Routing CardBus interrupts to PCI >>>> Yenta TI: socket 0000:00:0c.0, mfunc 0x00001002, devctl 0x44 >>>> 8139too Fast Ethernet driver 0.9.28 >>>> hdc: ATAPI 24X DVD-ROM DVD-R-RAM CD-R/RW drive, 2048kB Cache >>>> Uniform CD-ROM driver Revision: 3.20 >>>> Yenta: ISA IRQ mask 0x0840, PCI irq 16 >>>> Socket status: 30000006 >>>> ACPI: PCI Interrupt 0000:00:08.0[A] -> GSI 19 (level, low) -> IRQ 19 >>>> eth0: RealTek RTL8139 at 0xf88fa000, 00:90:f5:3e:5a:ca, IRQ 19 >>>> eth0: Identified 8139 chip type 'RTL-8100B/8139D' >>>> Marking TSC unstable due to: possible TSC halt in C2. >>>> Time: acpi_pm clocksource has been installed. >>>> usbcore: registered new interface driver usbfs >>>> usbcore: registered new interface driver hub >>>> usbcore: registered new device driver usb >>>> input: PC Speaker as /class/input/input4 >>>> pnp: the driver 'parport_pc' has been registered >>>> parport_pc 00:0a: reported by Plug and Play ACPI >>>> parport0: PC-style at 0x378 (0x778), irq 7, dma 1 >>> [PCSPP,TRISTATE,COMPAT,ECP,DMA] >>>> Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing disabled >>>> serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A >>>> Real Time Clock Driver v1.12ac >>>> parport_pc 00:0a: driver attached >>>> USB Universal Host Controller Interface driver v3.0 >>>> ACPI: PCI Interrupt Link [ALKD] disabled and referenced, BIOS bug >>>> ACPI: PCI Interrupt Link [ALKD] BIOS reported IRQ 0, using IRQ 21 >>>> ACPI: PCI Interrupt Link [ALKD] enabled at IRQ 21 >>>> ACPI: PCI Interrupt 0000:00:10.0[A] -> Link [ALKD] -> GSI 21 (level, low) >-> >>> IRQ 21 >>>> uhci_hcd 0000:00:10.0: UHCI Host Controller >>>> uhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 1 >>>> uhci_hcd 0000:00:10.0: irq 21, io base 0x00001c00 >>>> usb usb1: configuration #1 chosen from 1 choice >>>> hub 1-0:1.0: USB hub found >>>> hub 1-0:1.0: 2 ports detected >>>> ACPI: PCI Interrupt 0000:00:10.1[B] -> Link [ALKD] -> GSI 21 (level, low) >-> >>> IRQ 21 >>>> uhci_hcd 0000:00:10.1: UHCI Host Controller >>>> uhci_hcd 0000:00:10.1: new USB bus registered, assigned bus number 2 >>>> uhci_hcd 0000:00:10.1: irq 21, io base 0x00001c20 >>>> usb usb2: configuration #1 chosen from 1 choice >>>> hub 2-0:1.0: USB hub found >>>> hub 2-0:1.0: 2 ports detected >>>> ACPI: PCI Interrupt 0000:00:10.2[C] -> Link [ALKD] -> GSI 21 (level, low) >-> >>> IRQ 21 >>>> uhci_hcd 0000:00:10.2: UHCI Host Controller >>>> uhci_hcd 0000:00:10.2: new USB bus registered, assigned bus number 3 >>>> uhci_hcd 0000:00:10.2: irq 21, io base 0x00001c40 >>>> usb usb3: configuration #1 chosen from 1 choice >>>> hub 3-0:1.0: USB hub found >>>> hub 3-0:1.0: 2 ports detected >>>> pnp: the driver 'serial' has been registered >>>> 00:09: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A >>>> serial 00:09: driver attached >>>> ACPI: PCI Interrupt 0000:00:10.3[D] -> Link [ALKD] -> GSI 21 (level, low) >-> >>> IRQ 21 >>>> ehci_hcd 0000:00:10.3: EHCI Host Controller >>>> ehci_hcd 0000:00:10.3: new USB bus registered, assigned bus number 4 >>>> ehci_hcd 0000:00:10.3: irq 21, io mem 0xd0004400 >>>> ehci_hcd 0000:00:10.3: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 >>>> usb usb4: configuration #1 chosen from 1 choice >>>> hub 4-0:1.0: USB hub found >>>> hub 4-0:1.0: 6 ports detected >>>> cs: IO port probe 0x100-0x4ff: clean. >>>> cs: IO port probe 0x800-0x8ff: clean. >>>> cs: IO port probe 0xc00-0xcff: clean. >>>> cs: IO port probe 0xa00-0xaff: clean. >>>> ACPI: PCI Interrupt Link [ALKC] disabled and referenced, BIOS bug >>>> ACPI: PCI Interrupt Link [ALKC] BIOS reported IRQ 0, using IRQ 22 >>>> ACPI: PCI Interrupt Link [ALKC] enabled at IRQ 22 >>>> ACPI: PCI Interrupt 0000:00:11.6[C] -> Link [ALKC] -> GSI 22 (level, low) >-> >>> IRQ 22 >>>> PCI: Setting latency timer of device 0000:00:11.6 to 64 >>>> ACPI: PCI Interrupt 0000:00:11.5[C] -> Link [ALKC] -> GSI 22 (level, low) >-> >>> IRQ 22 >>>> PCI: Setting latency timer of device 0000:00:11.5 to 64 >>>> Adding 1951888k swap on /dev/hda2. Priority:-1 extents:1 across:1951888k >>>> pnp: the driver 'i8042 kbd' has been registered >>>> i8042 kbd 00:08: driver attached >>>> pnp: the driver 'i8042 aux' has been registered >>>> i8042 aux 00:07: driver attached >>>> PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12 >>>> i8042.c: Detected active multiplexing controller, rev 1.1. >>>> serio: i8042 KBD port at 0x60,0x64 irq 1 >>>> serio: i8042 AUX0 port at 0x60,0x64 irq 12 >>>> serio: i8042 AUX1 port at 0x60,0x64 irq 12 >>>> serio: i8042 AUX2 port at 0x60,0x64 irq 12 >>>> serio: i8042 AUX3 port at 0x60,0x64 irq 12 >>>> input: AT Translated Set 2 keyboard as /class/input/input5 >>>> powernow-k8: Found 1 Mobile AMD Sempron(tm) Processor 2600+ processors (1 >cpu >>> cores) (version 2.20.00) >>>> powernow-k8: 0 : fid 0x8 (1600 MHz), vid 0x6 >>>> powernow-k8: 1 : fid 0x0 (800 MHz), vid 0x18 >>>> powernow-k8: ph2 null fid transition 0x8 >>>> input: PS/2 Mouse as /class/input/input6 >>>> input: AlpsPS/2 ALPS GlidePoint as /class/input/input7 >>>> mice: PS/2 mouse device common for all mice >>>> Linux agpgart interface v0.103 >>>> [drm] Initialized drm 1.1.0 20060810 >>>> ACPI: PCI Interrupt 0000:01:00.0[A] -> GSI 16 (level, low) -> IRQ 16 >>>> [drm] Initialized via 2.11.1 20070202 on minor 0 >>>> leds_clevo_mail: 'Clevo D410J' found >>>> Registered led device: clevo::mail >>>> ACPI Exception (thermal-0514): AE_ERROR, ACPI thermal trip point state >changed >>>> Please send acpidump to linux-acpi@vger.kernel.org >>>> [20070126] >>>> ReiserFS: hda1: found reiserfs format "3.6" with standard journal >>>> ReiserFS: hda1: using ordered data mode >>>> ReiserFS: hda1: journal params: device hda1, size 8192, journal first block >>> 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30 >>>> ReiserFS: hda1: checking transaction log (hda1) >>>> ReiserFS: hda1: Using r5 hash to sort names >>>> ip_tables: (C) 2000-2006 Netfilter Core Team >>>> eth0: link up, 100Mbps, full-duplex, lpa 0x41E1 >>>> NET: Registered protocol family 10 >>>> lp0: using parport0 (interrupt-driven). >>>> ppdev: user-space parallel port driver >>>> Clocksource tsc unstable (delta = -282353088 ns) >>>> eth0: no IPv6 routers present >>>> warning: `avahi-daemon' uses 32-bit capabilities (legacy support in use) >>>> irq 16: nobody cared (try booting with the "irqpoll" option) >>>> Pid: 0, comm: swapper Not tainted 2.6.25-rc4 #1 >>>> [<c0157227>] __report_bad_irq+0x27/0x90 >>>> [<c01574c6>] note_interrupt+0x236/0x270 >>>> [<c01568d3>] ? handle_IRQ_event+0x53/0x60 >>>> [<c0157b6a>] handle_fasteoi_irq+0x7a/0xd0 >>>> [<c0106174>] do_IRQ+0x44/0xa0 >>>> [<c0104c66>] common_interrupt+0x2e/0x34 >>>> [<c0301ac8>] ? _spin_unlock_irq+0x28/0x50 >>>> [<c0118974>] finish_task_switch+0x54/0xc0 >>>> [<c0118920>] ? finish_task_switch+0x0/0xc0 >>>> [<c02ff326>] schedule+0x2b6/0x470 >>>> [<f892fdae>] ? acpi_processor_idle+0x0/0x436 [processor] >>>> [<c0102b65>] cpu_idle+0xb5/0xd0 >>>> [<c02fa66c>] rest_init+0x5c/0x60 >>>> ======================= >>>> handlers: >>>> [<f8915830>] (yenta_interrupt+0x0/0xe0 [yenta_socket]) >>>> [<f8aee3f0>] (via_driver_irq_handler+0x0/0x1c0 [via]) >>>> Disabling IRQ #16 >>> -- >>> To unsubscribe from this list: send the line "unsubscribe linux-acpi" in >>> the body of a message to majordomo@vger.kernel.org >>> More majordomo info at http://vger.kernel.org/majordomo-info.html >> >> > > >-- >To unsubscribe from this list: send the line "unsubscribe linux-acpi" in >the body of a message to majordomo@vger.kernel.org >More majordomo info at http://vger.kernel.org/majordomo-info.html [-- Attachment #2: patch-debug-thermal --] [-- Type: application/octet-stream, Size: 1227 bytes --] --- drivers/acpi/thermal.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) Index: linux-2.6/drivers/acpi/thermal.c =================================================================== --- linux-2.6.orig/drivers/acpi/thermal.c +++ linux-2.6/drivers/acpi/thermal.c @@ -355,6 +355,7 @@ static int acpi_thermal_trips_update(str int valid = 0; int i; + printk("ACPI thermal trips update, flag is %x", flag); /* Critical Shutdown (required) */ if (flag & ACPI_TRIPS_CRITICAL) { status = acpi_evaluate_integer(tz->device->handle, @@ -403,6 +404,7 @@ static int acpi_thermal_trips_update(str /* Passive (optional) */ if (flag & ACPI_TRIPS_PASSIVE) { valid = tz->trips.passive.flags.valid; + printk("Checking %s passive trip point...\n", valid ? "valid" : "invalid"); if (psv == -1) { status = AE_SUPPORT; } else if (psv > 0) { @@ -461,7 +463,7 @@ static int acpi_thermal_trips_update(str for (i = 0; i < ACPI_THERMAL_MAX_ACTIVE; i++) { char name[5] = { '_', 'A', 'C', ('0' + i), '\0' }; valid = tz->trips.active[i].flags.valid; - + printk("Checking %s active[%d] trip point...\n", valid ? "valid" : "invalid", i); if (act == -1) break; /* disable all active trip points */ ^ permalink raw reply [flat|nested] 18+ messages in thread
* Re: AE_ERROR, ACPI thermal trip point state changed 2008-03-07 6:54 ` Németh Márton 2008-03-07 7:19 ` Zhang, Rui @ 2008-03-07 7:24 ` Zhang, Rui 2008-03-08 7:41 ` Németh Márton 1 sibling, 1 reply; 18+ messages in thread From: Zhang, Rui @ 2008-03-07 7:24 UTC (permalink / raw) To: Németh Márton; +Cc: linux-acpi, LKML [-- Attachment #1: Type: text/plain, Size: 2107 bytes --] On Fri, 2008-03-07 at 14:54 +0800, Németh Márton wrote: > Hi, > > I downloaded pmtools from > http://www.kernel.org/pub/linux/kernel/people/lenb/acpi/utils/pmtools-20071116.tar.bz2 and > compiled: it created exactly the same result what my currently > installed acpidump Debian > package version 20071116-1. I think it is useless to send the same log > again. > > After I boot the "Please send acpidump to linux-acpi@vger.kernel.org" > message is already > there. So when I first get the prompt I checked for this message in > dmesg and executed > the given command. Here is my result: > > # cat /proc/acpi/thermal_zone/*/* > 0 - Active; 1 - Passive > <polling disabled> > state: ok > temperature: 42 C > critical (S5): 155 C > passive: 84 C: tc1=2 tc2=5 tsp=0 devices=CPU0 > active[0]: 70 C: devices= > # ls /proc/acpi/thermal_zone/*/* > /proc/acpi/thermal_zone/THRM/cooling_mode > /proc/acpi/thermal_zone/THRM/polling_frequency > /proc/acpi/thermal_zone/THRM/state > /proc/acpi/thermal_zone/THRM/temperature > /proc/acpi/thermal_zone/THRM/trip_points > > Maybe this is related to > http://bugzilla.kernel.org/show_bug.cgi?id=8544 ? > Hi, Németh, Please ignore the debug patch I sent and try this one. thanks, rui thermal fixup for broken BIOS Signed-off-by: Zhang Rui<rui.zhang@intel.com> --- drivers/acpi/thermal.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) Index: linux-2.6/drivers/acpi/thermal.c =================================================================== --- linux-2.6.orig/drivers/acpi/thermal.c +++ linux-2.6/drivers/acpi/thermal.c @@ -326,7 +326,9 @@ static int acpi_thermal_set_cooling_mode #define ACPI_TRIPS_ACTIVE 0x08 #define ACPI_TRIPS_DEVICES 0x10 -#define ACPI_TRIPS_REFRESH_THRESHOLDS (ACPI_TRIPS_PASSIVE | ACPI_TRIPS_ACTIVE) +#define ACPI_TRIPS_REFRESH_THRESHOLDS (ACPI_TRIPS_PASSIVE | \ + ACPI_TRIPS_ACTIVE | \ + ACPI_TRIPS_DEVICES) #define ACPI_TRIPS_REFRESH_DEVICES ACPI_TRIPS_DEVICES #define ACPI_TRIPS_INIT (ACPI_TRIPS_CRITICAL | ACPI_TRIPS_HOT | \ [-- Attachment #2: thermal-fix --] [-- Type: text/plain, Size: 809 bytes --] thermal fixup for broken BIOS Signed-off-by: Zhang Rui<rui.zhang@intel.com> --- drivers/acpi/thermal.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) Index: linux-2.6/drivers/acpi/thermal.c =================================================================== --- linux-2.6.orig/drivers/acpi/thermal.c +++ linux-2.6/drivers/acpi/thermal.c @@ -326,7 +326,9 @@ static int acpi_thermal_set_cooling_mode #define ACPI_TRIPS_ACTIVE 0x08 #define ACPI_TRIPS_DEVICES 0x10 -#define ACPI_TRIPS_REFRESH_THRESHOLDS (ACPI_TRIPS_PASSIVE | ACPI_TRIPS_ACTIVE) +#define ACPI_TRIPS_REFRESH_THRESHOLDS (ACPI_TRIPS_PASSIVE | \ + ACPI_TRIPS_ACTIVE | \ + ACPI_TRIPS_DEVICES) #define ACPI_TRIPS_REFRESH_DEVICES ACPI_TRIPS_DEVICES #define ACPI_TRIPS_INIT (ACPI_TRIPS_CRITICAL | ACPI_TRIPS_HOT | \ ^ permalink raw reply [flat|nested] 18+ messages in thread
* Re: AE_ERROR, ACPI thermal trip point state changed 2008-03-07 7:24 ` Zhang, Rui @ 2008-03-08 7:41 ` Németh Márton 2008-03-10 1:52 ` Zhang, Rui 0 siblings, 1 reply; 18+ messages in thread From: Németh Márton @ 2008-03-08 7:41 UTC (permalink / raw) To: Zhang, Rui; +Cc: linux-acpi, LKML [-- Attachment #1: Type: text/plain, Size: 1662 bytes --] Zhang, Rui wrote: > On Fri, 2008-03-07 at 14:54 +0800, Németh Márton wrote: >> Hi, >> >> I downloaded pmtools from >> http://www.kernel.org/pub/linux/kernel/people/lenb/acpi/utils/pmtools-20071116.tar.bz2 and >> compiled: it created exactly the same result what my currently >> installed acpidump Debian >> package version 20071116-1. I think it is useless to send the same log >> again. >> >> After I boot the "Please send acpidump to linux-acpi@vger.kernel.org" >> message is already >> there. So when I first get the prompt I checked for this message in >> dmesg and executed >> the given command. Here is my result: >> >> # cat /proc/acpi/thermal_zone/*/* >> 0 - Active; 1 - Passive >> <polling disabled> >> state: ok >> temperature: 42 C >> critical (S5): 155 C >> passive: 84 C: tc1=2 tc2=5 tsp=0 devices=CPU0 >> active[0]: 70 C: devices= >> # ls /proc/acpi/thermal_zone/*/* >> /proc/acpi/thermal_zone/THRM/cooling_mode >> /proc/acpi/thermal_zone/THRM/polling_frequency >> /proc/acpi/thermal_zone/THRM/state >> /proc/acpi/thermal_zone/THRM/temperature >> /proc/acpi/thermal_zone/THRM/trip_points >> >> Maybe this is related to >> http://bugzilla.kernel.org/show_bug.cgi?id=8544 ? >> > Hi, Németh, > > Please ignore the debug patch I sent and try this one. I created both the dmesg logs: 1. Clevo-D410J-patch-debug-thermal2.txt: the patch-debug-thermal was only applied, (and added a missing "\n"). 2. Clevo-D410J-thermal-fix.txt: the thermal-fix patch was also applied. In this case the AE_ERROR message is not there any more on Clevo D410J laptop. Regards, Márton Németh [-- Attachment #2: Clevo-D410J-patch-debug-thermal2.txt --] [-- Type: text/plain, Size: 32153 bytes --] [ 0.000000] Linux version 2.6.25-rc4 (nmarci@europa) (gcc version 4.2.3 20080114 (prerelease) (Debian 4.2.2-7)) #6 PREEMPT Sat Mar 8 08:11:47 CET 2008 [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f800 (usable) [ 0.000000] BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved) [ 0.000000] BIOS-e820: 00000000000d8000 - 0000000000100000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 000000003bf70000 (usable) [ 0.000000] BIOS-e820: 000000003bf70000 - 000000003bf7a000 (ACPI data) [ 0.000000] BIOS-e820: 000000003bf7a000 - 000000003bf80000 (ACPI NVS) [ 0.000000] BIOS-e820: 000000003bf80000 - 0000000040000000 (reserved) [ 0.000000] BIOS-e820: 00000000fffe0000 - 0000000100000000 (reserved) [ 0.000000] 63MB HIGHMEM available. [ 0.000000] 896MB LOWMEM available. [ 0.000000] Scan SMP from c0000000 for 1024 bytes. [ 0.000000] Scan SMP from c009fc00 for 1024 bytes. [ 0.000000] Scan SMP from c00f0000 for 65536 bytes. [ 0.000000] found SMP MP-table at [c00f6870] 000f6870 [ 0.000000] Entering add_active_range(0, 0, 245616) 0 entries of 256 used [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0 -> 4096 [ 0.000000] Normal 4096 -> 229376 [ 0.000000] HighMem 229376 -> 245616 [ 0.000000] Movable zone start PFN for each node [ 0.000000] early_node_map[1] active PFN ranges [ 0.000000] 0: 0 -> 245616 [ 0.000000] On node 0 totalpages: 245616 [ 0.000000] DMA zone: 32 pages used for memmap [ 0.000000] DMA zone: 0 pages reserved [ 0.000000] DMA zone: 4064 pages, LIFO batch:0 [ 0.000000] Normal zone: 1760 pages used for memmap [ 0.000000] Normal zone: 223520 pages, LIFO batch:31 [ 0.000000] HighMem zone: 126 pages used for memmap [ 0.000000] HighMem zone: 16114 pages, LIFO batch:3 [ 0.000000] Movable zone: 0 pages used for memmap [ 0.000000] DMI present. [ 0.000000] ACPI: RSDP 000F68D0, 0014 (r0 PTLTD ) [ 0.000000] ACPI: RSDT 3BF7600B, 0030 (r1 PTLTD RSDT 6040000 LTP 0) [ 0.000000] ACPI: FACP 3BF79E87, 0074 (r1 AMDK8 PTLTW 6040000 PTL_ F4240) [ 0.000000] ACPI: DSDT 3BF7603B, 3E4C (r1 VIA PTL_ACPI 6040000 MSFT 100000E) [ 0.000000] ACPI: FACS 3BF7AFC0, 0040 [ 0.000000] ACPI: SSDT 3BF79EFB, 00B5 (r1 PTLTD POWERNOW 6040000 LTP 1) [ 0.000000] ACPI: APIC 3BF79FB0, 0050 (r1 PTLTD APIC 6040000 LTP 0) [ 0.000000] ACPI: PM-Timer IO Port: 0x4008 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) [ 0.000000] Processor #0 15:12 APIC version 16 [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) [ 0.000000] ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 1, version 3, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 high edge) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] ACPI: IRQ10 used by override. [ 0.000000] Enabling APIC mode: Flat. Using 1 I/O APICs [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] Allocating PCI resources starting at 50000000 (gap: 40000000:bffe0000) [ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000 [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000d8000 [ 0.000000] PM: Registered nosave memory: 00000000000d8000 - 0000000000100000 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 243698 [ 0.000000] Kernel command line: root=/dev/hda3 ro log_buf_len=1M resume=/dev/hda2 [ 0.000000] log_buf_len: 1048576 [ 0.000000] mapped APIC to ffffb000 (fee00000) [ 0.000000] mapped IOAPIC to ffffa000 (fec00000) [ 0.000000] Enabling fast FPU save and restore... done. [ 0.000000] Enabling unmasked SIMD FPU exception support... done. [ 0.000000] Initializing CPU#0 [ 0.000000] PID hash table entries: 4096 (order: 12, 16384 bytes) [ 0.000000] Detected 1603.642 MHz processor. [ 0.000999] Console: colour VGA+ 80x25 [ 0.000999] console [tty0] enabled [ 0.000999] Lock dependency validator: Copyright (c) 2006 Red Hat, Inc., Ingo Molnar [ 0.000999] ... MAX_LOCKDEP_SUBCLASSES: 8 [ 0.000999] ... MAX_LOCK_DEPTH: 48 [ 0.000999] ... MAX_LOCKDEP_KEYS: 2048 [ 0.000999] ... CLASSHASH_SIZE: 1024 [ 0.000999] ... MAX_LOCKDEP_ENTRIES: 8192 [ 0.000999] ... MAX_LOCKDEP_CHAINS: 16384 [ 0.000999] ... CHAINHASH_SIZE: 8192 [ 0.000999] memory used by lock dependency info: 992 kB [ 0.000999] per task-struct memory footprint: 1920 bytes [ 0.000999] ------------------------ [ 0.000999] | Locking API testsuite: [ 0.000999] ---------------------------------------------------------------------------- [ 0.000999] | spin |wlock |rlock |mutex | wsem | rsem | [ 0.000999] -------------------------------------------------------------------------- [ 0.000999] A-A deadlock: ok | ok | ok | ok | ok | ok | [ 0.000999] A-B-B-A deadlock: ok | ok | ok | ok | ok | ok | [ 0.000999] A-B-B-C-C-A deadlock: ok | ok | ok | ok | ok | ok | [ 0.000999] A-B-C-A-B-C deadlock: ok | ok | ok | ok | ok | ok | [ 0.000999] A-B-B-C-C-D-D-A deadlock: ok | ok | ok | ok | ok | ok | [ 0.000999] A-B-C-D-B-D-D-A deadlock: ok | ok | ok | ok | ok | ok | [ 0.000999] A-B-C-D-B-C-D-A deadlock: ok | ok | ok | ok | ok | ok | [ 0.000999] double unlock: ok | ok | ok | ok | ok | ok | [ 0.000999] initialize held: ok | ok | ok | ok | ok | ok | [ 0.000999] bad unlock order: ok | ok | ok | ok | ok | ok | [ 0.000999] -------------------------------------------------------------------------- [ 0.000999] recursive read-lock: | ok | | ok | [ 0.000999] recursive read-lock #2: | ok | | ok | [ 0.000999] mixed read-write-lock: | ok | | ok | [ 0.000999] mixed write-read-lock: | ok | | ok | [ 0.000999] -------------------------------------------------------------------------- [ 0.000999] hard-irqs-on + irq-safe-A/12: ok | ok | ok | [ 0.000999] soft-irqs-on + irq-safe-A/12: ok | ok | ok | [ 0.000999] hard-irqs-on + irq-safe-A/21: ok | ok | ok | [ 0.000999] soft-irqs-on + irq-safe-A/21: ok | ok | ok | [ 0.000999] sirq-safe-A => hirqs-on/12: ok | ok | ok | [ 0.000999] sirq-safe-A => hirqs-on/21: ok | ok | ok | [ 0.000999] hard-safe-A + irqs-on/12: ok | ok | ok | [ 0.000999] soft-safe-A + irqs-on/12: ok | ok | ok | [ 0.000999] hard-safe-A + irqs-on/21: ok | ok | ok | [ 0.000999] soft-safe-A + irqs-on/21: ok | ok | ok | [ 0.000999] hard-safe-A + unsafe-B #1/123: ok | ok | ok | [ 0.000999] soft-safe-A + unsafe-B #1/123: ok | ok | ok | [ 0.000999] hard-safe-A + unsafe-B #1/132: ok | ok | ok | [ 0.000999] soft-safe-A + unsafe-B #1/132: ok | ok | ok | [ 0.000999] hard-safe-A + unsafe-B #1/213: ok | ok | ok | [ 0.000999] soft-safe-A + unsafe-B #1/213: ok | ok | ok | [ 0.000999] hard-safe-A + unsafe-B #1/231: ok | ok | ok | [ 0.000999] soft-safe-A + unsafe-B #1/231: ok | ok | ok | [ 0.000999] hard-safe-A + unsafe-B #1/312: ok | ok | ok | [ 0.000999] soft-safe-A + unsafe-B #1/312: ok | ok | ok | [ 0.000999] hard-safe-A + unsafe-B #1/321: ok | ok | ok | [ 0.000999] soft-safe-A + unsafe-B #1/321: ok | ok | ok | [ 0.000999] hard-safe-A + unsafe-B #2/123: ok | ok | ok | [ 0.000999] soft-safe-A + unsafe-B #2/123: ok | ok | ok | [ 0.000999] hard-safe-A + unsafe-B #2/132: ok | ok | ok | [ 0.000999] soft-safe-A + unsafe-B #2/132: ok | ok | ok | [ 0.000999] hard-safe-A + unsafe-B #2/213: ok | ok | ok | [ 0.000999] soft-safe-A + unsafe-B #2/213: ok | ok | ok | [ 0.000999] hard-safe-A + unsafe-B #2/231: ok | ok | ok | [ 0.000999] soft-safe-A + unsafe-B #2/231: ok | ok | ok | [ 0.000999] hard-safe-A + unsafe-B #2/312: ok | ok | ok | [ 0.000999] soft-safe-A + unsafe-B #2/312: ok | ok | ok | [ 0.000999] hard-safe-A + unsafe-B #2/321: ok | ok | ok | [ 0.000999] soft-safe-A + unsafe-B #2/321: ok | ok | ok | [ 0.000999] hard-irq lock-inversion/123: ok | ok | ok | [ 0.000999] soft-irq lock-inversion/123: ok | ok | ok | [ 0.000999] hard-irq lock-inversion/132: ok | ok | ok | [ 0.000999] soft-irq lock-inversion/132: ok | ok | ok | [ 0.000999] hard-irq lock-inversion/213: ok | ok | ok | [ 0.000999] soft-irq lock-inversion/213: ok | ok | ok | [ 0.000999] hard-irq lock-inversion/231: ok | ok | ok | [ 0.000999] soft-irq lock-inversion/231: ok | ok | ok | [ 0.000999] hard-irq lock-inversion/312: ok | ok | ok | [ 0.000999] soft-irq lock-inversion/312: ok | ok | ok | [ 0.000999] hard-irq lock-inversion/321: ok | ok | ok | [ 0.000999] soft-irq lock-inversion/321: ok | ok | ok | [ 0.000999] hard-irq read-recursion/123: ok | [ 0.000999] soft-irq read-recursion/123: ok | [ 0.000999] hard-irq read-recursion/132: ok | [ 0.000999] soft-irq read-recursion/132: ok | [ 0.000999] hard-irq read-recursion/213: ok | [ 0.000999] soft-irq read-recursion/213: ok | [ 0.000999] hard-irq read-recursion/231: ok | [ 0.000999] soft-irq read-recursion/231: ok | [ 0.000999] hard-irq read-recursion/312: ok | [ 0.000999] soft-irq read-recursion/312: ok | [ 0.000999] hard-irq read-recursion/321: ok | [ 0.000999] soft-irq read-recursion/321: ok | [ 0.000999] ------------------------------------------------------- [ 0.000999] Good, all 218 testcases passed! | [ 0.000999] --------------------------------- [ 0.000999] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) [ 0.000999] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) [ 0.000999] Memory: 966876k/982464k available (2073k kernel code, 15072k reserved, 889k data, 272k init, 64960k highmem) [ 0.000999] virtual kernel memory layout: [ 0.000999] fixmap : 0xfffa8000 - 0xfffff000 ( 348 kB) [ 0.000999] pkmap : 0xff800000 - 0xffc00000 (4096 kB) [ 0.000999] vmalloc : 0xf8800000 - 0xff7fe000 ( 111 MB) [ 0.000999] lowmem : 0xc0000000 - 0xf8000000 ( 896 MB) [ 0.000999] .init : 0xc03e8000 - 0xc042c000 ( 272 kB) [ 0.000999] .data : 0xc030654b - 0xc03e4c18 ( 889 kB) [ 0.000999] .text : 0xc0100000 - 0xc030654b (2073 kB) [ 0.000999] Checking if this processor honours the WP bit even in supervisor mode...Ok. [ 0.000999] CPA: page pool initialized 1 of 1 pages preallocated [ 0.060995] Calibrating delay using timer specific routine.. 3210.58 BogoMIPS (lpj=1605290) [ 0.061255] Mount-cache hash table entries: 512 [ 0.062190] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) [ 0.062995] CPU: L2 Cache: 128K (64 bytes/line) [ 0.063051] Intel machine check architecture supported. [ 0.063108] Intel machine check reporting enabled on CPU#0. [ 0.063171] Compat vDSO mapped to ffffe000. [ 0.063231] CPU: AMD Mobile AMD Sempron(tm) Processor 2600+ stepping 00 [ 0.063407] Checking 'hlt' instruction... OK. [ 0.067334] Freeing SMP alternatives: 0k freed [ 0.067389] ACPI: Core revision 20070126 [ 0.075700] Parsing all Control Methods: [ 0.075829] Table [DSDT](id 0001) - 480 Objects with 49 Devices 147 Methods 13 Regions [ 0.076045] Parsing all Control Methods: [ 0.076167] Table [SSDT](id 0002) - 3 Objects with 0 Devices 0 Methods 0 Regions [ 0.076282] tbxface-0598 [00] tb_load_namespace : ACPI Tables successfully acquired [ 0.077049] evxfevnt-0091 [00] enable : Transition to ACPI mode successful [ 0.078951] ENABLING IO-APIC IRQs [ 0.078988] ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=0 pin2=0 [ 0.088986] net_namespace: 604 bytes [ 0.089542] NET: Registered protocol family 16 [ 0.090468] EISA bus registered [ 0.090552] ACPI: bus type pci registered [ 0.098184] PCI: PCI BIOS revision 2.10 entry at 0xfd88c, last bus=1 [ 0.098246] PCI: Using configuration type 1 [ 0.098301] Setting up standard PCI resources [ 0.102693] evgpeblk-0956 [00] ev_create_gpe_block : GPE 00 to 0F [_GPE] 2 regs on int 0xA [ 0.103507] evgpeblk-1052 [00] ev_initialize_gpe_bloc: Found 4 Wake, Enabled 0 Runtime GPEs in this block [ 0.103662] ACPI: EC: Look up EC in DSDT [ 0.105968] Completing Region/Field/Buffer/Package initialization:..................................................... [ 0.112059] Initialized 11/13 Regions 1/1 Fields 23/24 Buffers 18/26 Packages (492 nodes) [ 0.112176] Initializing Device/Processor/Thermal objects by executing _INI methods:. [ 0.112520] Executed 1 _INI methods requiring 1 _STA executions (examined 53 objects) [ 0.112710] ACPI: Interpreter enabled [ 0.112765] ACPI: (supports S0 S3 S4 S5) [ 0.113073] ACPI: Using IOAPIC for interrupt routing [ 0.124960] ACPI: EC: non-query interrupt received, switching to interrupt mode [ 0.141100] ACPI: EC: GPE = 0xb, I/O: command/status = 0x66, data = 0x62 [ 0.141163] ACPI: EC: driver started in interrupt mode [ 0.141406] ACPI: PCI Root Bridge [PCI0] (0000:00) [ 0.142668] pci 0000:00:11.0: quirk: region 4000-407f claimed by vt8235 PM [ 0.142730] pci 0000:00:11.0: quirk: region 8100-810f claimed by vt8235 SMB [ 0.143303] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 0.163710] ACPI: PCI Interrupt Link [ALKA] (IRQs 16 17 18 19 20 21 22 23) *9, disabled. [ 0.164421] ACPI: PCI Interrupt Link [ALKB] (IRQs 16 17 18 19 20 21 22 23) *11, disabled. [ 0.165135] ACPI: PCI Interrupt Link [ALKC] (IRQs 22) *10, disabled. [ 0.165538] ACPI: PCI Interrupt Link [ALKD] (IRQs 21) *5, disabled. [ 0.166042] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 7 *9 12 14 15) [ 0.166735] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 7 10 12 14 15) *11 [ 0.167461] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 7 11 12 14 15) *10 [ 0.168174] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 *5 7 9 10 11 12 14 15) [ 0.169139] Linux Plug and Play Support v0.97 (c) Adam Belay [ 0.169323] pnp: PnP ACPI init [ 0.169421] ACPI: bus type pnp registered [ 0.171596] pnp 00:00: Plug and Play ACPI device, IDs PNP0a03 (active) [ 0.172380] pnp 00:01: Plug and Play ACPI device, IDs PNP0200 (active) [ 0.172644] pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active) [ 0.172904] pnp 00:03: Plug and Play ACPI device, IDs PNP0c04 (active) [ 0.173225] pnp 00:04: Plug and Play ACPI device, IDs PNP0800 (active) [ 0.173355] 00:05: calling quirk 0xc025ae70: quirk_supermicro_h8dce_system+0x0/0x110() [ 0.173531] pnp 00:05: Plug and Play ACPI device, IDs PNP0c01 (active) [ 0.173827] 00:06: calling quirk 0xc025ae70: quirk_supermicro_h8dce_system+0x0/0x110() [ 0.174030] pnp 00:06: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.174292] pnp 00:07: Plug and Play ACPI device, IDs PNP0f13 (active) [ 0.174537] pnp 00:08: Plug and Play ACPI device, IDs PNP0303 (active) [ 0.175664] pnp 00:09: Plug and Play ACPI device, IDs PNP0501 (active) [ 0.176873] pnp 00:0a: Plug and Play ACPI device, IDs PNP0401 (active) [ 0.677904] ACPI: EC: missing write data confirmation, don't expect it any longer. [ 0.677904] pnp: PnP ACPI: found 11 devices [ 0.677904] ACPI: ACPI bus type pnp unregistered [ 0.678131] PCI: Using ACPI for IRQ routing [ 0.678191] PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report [ 0.682723] pnp: the driver 'system' has been registered [ 0.682758] system 00:05: iomem range 0x0-0x9ffff could not be reserved [ 0.682821] system 00:05: iomem range 0xe0000-0xfffff could not be reserved [ 0.682882] system 00:05: iomem range 0xfff00000-0xffffffff could not be reserved [ 0.682903] Time: tsc clocksource has been installed. [ 0.682911] system 00:05: iomem range 0xffee0000-0xffefffff has been reserved [ 0.682982] system 00:05: iomem range 0xfec00000-0xfec00fff has been reserved [ 0.683042] system 00:05: iomem range 0xfee00000-0xfee00fff has been reserved [ 0.683100] system 00:05: driver attached [ 0.683114] system 00:06: ioport range 0x4d0-0x4d1 has been reserved [ 0.683174] system 00:06: ioport range 0xfe10-0xfe11 has been reserved [ 0.683233] system 00:06: ioport range 0xfe00-0xfe00 has been reserved [ 0.683292] system 00:06: ioport range 0x4000-0x407f has been reserved [ 0.683351] system 00:06: ioport range 0x8100-0x811f could not be reserved [ 0.683410] system 00:06: driver attached [ 0.715412] PCI: Bridge: 0000:00:01.0 [ 0.715472] IO window: disabled. [ 0.715529] MEM window: 0xd1000000-0xd1ffffff [ 0.715586] PREFETCH window: 0x00000000f0000000-0x00000000f3ffffff [ 0.715649] PCI: Bus 2, cardbus bridge: 0000:00:0c.0 [ 0.715704] IO window: 0x00002000-0x000020ff [ 0.715761] IO window: 0x00002400-0x000024ff [ 0.715818] PREFETCH window: 0x50000000-0x53ffffff [ 0.715876] MEM window: 0x54000000-0x57ffffff [ 0.715930] PCI: Setting latency timer of device 0000:00:01.0 to 64 [ 0.715944] PCI: Enabling device 0000:00:0c.0 (0000 -> 0003) [ 0.716013] ACPI: PCI Interrupt 0000:00:0c.0[A] -> GSI 16 (level, low) -> IRQ 16 [ 0.716129] PCI: Setting latency timer of device 0000:00:0c.0 to 64 [ 0.716199] NET: Registered protocol family 2 [ 0.716511] IP route cache hash table entries: 32768 (order: 5, 131072 bytes) [ 0.717330] TCP established hash table entries: 131072 (order: 8, 1048576 bytes) [ 0.718602] TCP bind hash table entries: 65536 (order: 9, 2097152 bytes) [ 0.724795] TCP: Hash tables configured (established 131072 bind 65536) [ 0.724901] TCP reno registered [ 0.727749] audit: initializing netlink socket (disabled) [ 0.727861] type=2000 audit(1204964371.726:1): initialized [ 0.728288] highmem bounce pool size: 64 pages [ 0.729091] io scheduler noop registered [ 0.729166] io scheduler cfq registered (default) [ 0.729244] PCI: VIA PCI bridge detected. Disabling DAC. [ 0.729381] pci 0000:01:00.0: Boot video device [ 0.729790] isapnp: Scanning for PnP cards... [ 1.086836] isapnp: No Plug & Play device found [ 1.173786] Uniform Multi-Platform E-IDE driver [ 1.173917] ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx [ 1.174167] VP_IDE: IDE controller (0x1106:0x0571 rev 0x06) at PCI slot 0000:00:11.1 [ 1.174480] ACPI: PCI Interrupt Link [ALKA] disabled and referenced, BIOS bug [ 1.174645] ACPI: PCI Interrupt Link [ALKA] BIOS reported IRQ 0, using IRQ 23 [ 1.174705] ACPI: PCI Interrupt Link [ALKA] enabled at IRQ 23 [ 1.174769] ACPI: PCI Interrupt 0000:00:11.1[A] -> Link [ALKA] -> GSI 23 (level, low) -> IRQ 23 [ 1.174947] VP_IDE: not 100% native mode: will probe irqs later [ 1.175016] VP_IDE: VIA vt8235 (rev 00) IDE UDMA133 controller on pci0000:00:11.1 [ 1.175093] ide0: BM-DMA at 0x1c60-0x1c67, BIOS settings: hda:DMA, hdb:PIO [ 1.175210] ide1: BM-DMA at 0x1c68-0x1c6f, BIOS settings: hdc:DMA, hdd:PIO [ 1.175323] Probing IDE interface ide0... [ 1.215863] Switched to high resolution mode on CPU 0 [ 1.714337] hdb: IRQ probe failed (0xfffffbfe) [ 1.988460] hdb: IRQ probe failed (0xfffffbfe) [ 2.415565] hda: SAMSUNG MP0804H, ATA DISK drive [ 2.415565] hda: host max PIO5 wanted PIO255(auto-tune) selected PIO4 [ 2.415565] hda: UDMA/100 mode selected [ 2.415565] Probing IDE interface ide1... [ 3.819842] hdc: Optiarc DVD RW AD-7543A, ATAPI CD/DVD-ROM drive [ 3.819842] hdc: host max PIO5 wanted PIO255(auto-tune) selected PIO4 [ 3.819842] hdc: UDMA/33 mode selected [ 3.819842] ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 [ 3.915658] ide1 at 0x170-0x177,0x376 on irq 15 [ 3.918118] pnp: the driver 'ide' has been registered [ 3.918312] hda: max request size: 512KiB [ 3.918460] hda: 156368016 sectors (80060 MB) w/8192KiB Cache, CHS=16383/255/63 [ 3.919383] hda: cache flushes supported [ 3.919421] hda: hda1 hda2 hda3 [ 3.923633] TCP cubic registered [ 3.923717] NET: Registered protocol family 1 [ 3.923797] NET: Registered protocol family 17 [ 3.923877] Using IPI Shortcut mode [ 3.958646] ReiserFS: hda3: found reiserfs format "3.6" with standard journal [ 3.958646] ReiserFS: hda3: using ordered data mode [ 3.968162] ReiserFS: hda3: journal params: device hda3, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30 [ 3.969498] ReiserFS: hda3: checking transaction log (hda3) [ 4.050340] ReiserFS: hda3: Using r5 hash to sort names [ 4.050340] VFS: Mounted root (reiserfs filesystem) readonly. [ 4.050340] Freeing unused kernel memory: 272k freed [ 4.050340] Write protecting the kernel read-only data: 728k [ 9.247539] ACPI: CPU0 (power states: C1[C1] C2[C2]) [ 9.247914] ACPI: ACPI0007:00 is registered as cooling_device0 [ 9.261698] input: Power Button (FF) as /class/input/input0 [ 9.264750] ACPI: Power Button (FF) [PWRF] [ 9.265023] input: Power Button (CM) as /class/input/input1 [ 9.267742] ACPI: Power Button (CM) [PWB] [ 9.267989] input: Sleep Button (CM) as /class/input/input2 [ 9.271693] ACPI: Sleep Button (CM) [SLPB] [ 9.271930] input: Lid Switch as /class/input/input3 [ 9.272250] ACPI: Lid Switch [LID] [ 9.275160] ACPI thermal trips update, flag is 1f [ 9.275295] Checking invalid passive trip point... [ 9.275848] Checking invalid active[0] trip point... [ 9.276433] ACPI: LNXTHERM:01 is registered as thermal_zone0 [ 9.276840] ACPI: Thermal Zone [THRM] (51 C) [ 9.283907] ACPI: AC Adapter [AC] (on-line) [ 9.298824] ACPI: Battery Slot [BAT0] (battery present) [ 9.779278] 8139too Fast Ethernet driver 0.9.28 [ 9.779413] ACPI: PCI Interrupt 0000:00:08.0[A] -> GSI 19 (level, low) -> IRQ 19 [ 9.780486] eth0: RealTek RTL8139 at 0xf88e6000, 00:90:f5:3e:5a:ca, IRQ 19 [ 9.780547] eth0: Identified 8139 chip type 'RTL-8100B/8139D' [ 9.926250] usbcore: registered new interface driver usbfs [ 9.926722] usbcore: registered new interface driver hub [ 9.932594] usbcore: registered new device driver usb [ 9.970145] Yenta: CardBus bridge found at 0000:00:0c.0 [1558:4702] [ 9.970231] Yenta: Using CSCINT to route CSC interrupts to PCI [ 9.970288] Yenta: Routing CardBus interrupts to PCI [ 9.970347] Yenta TI: socket 0000:00:0c.0, mfunc 0x00001002, devctl 0x44 [ 10.082540] Marking TSC unstable due to: possible TSC halt in C2. [ 10.088159] Time: acpi_pm clocksource has been installed. [ 10.124294] Yenta: ISA IRQ mask 0x0888, PCI irq 16 [ 10.124356] Socket status: 30000006 [ 10.283070] Real Time Clock Driver v1.12ac [ 10.323892] pnp: the driver 'parport_pc' has been registered [ 10.323925] parport_pc 00:0a: reported by Plug and Play ACPI [ 10.324206] parport0: PC-style at 0x378 (0x778), irq 7, dma 1 [PCSPP,TRISTATE,COMPAT,ECP,DMA] [ 10.364197] input: PC Speaker as /class/input/input4 [ 10.405891] parport_pc 00:0a: driver attached [ 10.664614] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing disabled [ 10.665559] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 10.690614] pnp: the driver 'serial' has been registered [ 10.693403] 00:09: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 10.693650] serial 00:09: driver attached [ 10.719440] USB Universal Host Controller Interface driver v3.0 [ 10.719731] ACPI: PCI Interrupt Link [ALKD] disabled and referenced, BIOS bug [ 10.720129] ACPI: PCI Interrupt Link [ALKD] BIOS reported IRQ 0, using IRQ 21 [ 10.720189] ACPI: PCI Interrupt Link [ALKD] enabled at IRQ 21 [ 10.720253] ACPI: PCI Interrupt 0000:00:10.0[A] -> Link [ALKD] -> GSI 21 (level, low) -> IRQ 21 [ 10.720490] uhci_hcd 0000:00:10.0: UHCI Host Controller [ 10.729144] uhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 1 [ 10.729274] uhci_hcd 0000:00:10.0: irq 21, io base 0x00001c00 [ 10.732056] usb usb1: configuration #1 chosen from 1 choice [ 10.734226] hub 1-0:1.0: USB hub found [ 10.734910] hub 1-0:1.0: 2 ports detected [ 10.822875] hdc: ATAPI 24X DVD-ROM DVD-R-RAM CD-R/RW drive, 2048kB Cache [ 10.823187] Uniform CD-ROM driver Revision: 3.20 [ 10.835896] ACPI: PCI Interrupt 0000:00:10.1[B] -> Link [ALKD] -> GSI 21 (level, low) -> IRQ 21 [ 10.836091] uhci_hcd 0000:00:10.1: UHCI Host Controller [ 10.836526] uhci_hcd 0000:00:10.1: new USB bus registered, assigned bus number 2 [ 10.836630] uhci_hcd 0000:00:10.1: irq 21, io base 0x00001c20 [ 10.837018] usb usb2: configuration #1 chosen from 1 choice [ 10.837526] hub 2-0:1.0: USB hub found [ 10.837599] hub 2-0:1.0: 2 ports detected [ 10.934718] ACPI: PCI Interrupt 0000:00:10.2[C] -> Link [ALKD] -> GSI 21 (level, low) -> IRQ 21 [ 10.934889] uhci_hcd 0000:00:10.2: UHCI Host Controller [ 10.935031] uhci_hcd 0000:00:10.2: new USB bus registered, assigned bus number 3 [ 10.935145] uhci_hcd 0000:00:10.2: irq 21, io base 0x00001c40 [ 10.935575] usb usb3: configuration #1 chosen from 1 choice [ 10.935712] hub 3-0:1.0: USB hub found [ 10.935788] hub 3-0:1.0: 2 ports detected [ 11.036784] ACPI: PCI Interrupt 0000:00:10.3[D] -> Link [ALKD] -> GSI 21 (level, low) -> IRQ 21 [ 11.036964] ehci_hcd 0000:00:10.3: EHCI Host Controller [ 11.037107] ehci_hcd 0000:00:10.3: new USB bus registered, assigned bus number 4 [ 11.037253] ehci_hcd 0000:00:10.3: irq 21, io mem 0xd0004400 [ 11.043452] ehci_hcd 0000:00:10.3: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 [ 11.043862] usb usb4: configuration #1 chosen from 1 choice [ 11.043994] hub 4-0:1.0: USB hub found [ 11.044427] hub 4-0:1.0: 6 ports detected [ 11.337448] cs: IO port probe 0x100-0x4ff: clean. [ 11.341653] cs: IO port probe 0x800-0x8ff: clean. [ 11.342764] cs: IO port probe 0xc00-0xcff: clean. [ 11.344099] cs: IO port probe 0xa00-0xaff: clean. [ 11.359967] ACPI: PCI Interrupt Link [ALKC] disabled and referenced, BIOS bug [ 11.360446] ACPI: PCI Interrupt Link [ALKC] BIOS reported IRQ 0, using IRQ 22 [ 11.360507] ACPI: PCI Interrupt Link [ALKC] enabled at IRQ 22 [ 11.360570] ACPI: PCI Interrupt 0000:00:11.6[C] -> Link [ALKC] -> GSI 22 (level, low) -> IRQ 22 [ 11.365193] PCI: Setting latency timer of device 0000:00:11.6 to 64 [ 11.871190] ACPI: PCI Interrupt 0000:00:11.5[C] -> Link [ALKC] -> GSI 22 (level, low) -> IRQ 22 [ 11.871492] PCI: Setting latency timer of device 0000:00:11.5 to 64 [ 14.695432] Adding 1951888k swap on /dev/hda2. Priority:-1 extents:1 across:1951888k [ 21.342637] ACPI thermal trips update, flag is c [ 21.342701] Checking valid passive trip point... [ 21.343243] Checking invalid active[0] trip point... [ 21.343342] ACPI Exception (thermal-0516): AE_ERROR, ACPI thermal trip point state changed [ 21.343390] Please send acpidump to linux-acpi@vger.kernel.org [ 21.343506] [20070126] [ 21.343558] Checking invalid active[1] trip point... [ 24.736866] pnp: the driver 'i8042 kbd' has been registered [ 24.736921] i8042 kbd 00:08: driver attached [ 24.736963] pnp: the driver 'i8042 aux' has been registered [ 24.736990] i8042 aux 00:07: driver attached [ 24.737026] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12 [ 24.740242] i8042.c: Detected active multiplexing controller, rev 1.1. [ 24.741655] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 24.748167] serio: i8042 AUX0 port at 0x60,0x64 irq 12 [ 24.748522] serio: i8042 AUX1 port at 0x60,0x64 irq 12 [ 24.748580] serio: i8042 AUX2 port at 0x60,0x64 irq 12 [ 24.748638] serio: i8042 AUX3 port at 0x60,0x64 irq 12 [ 24.775180] input: AT Translated Set 2 keyboard as /class/input/input5 [ 25.099613] powernow-k8: Found 1 Mobile AMD Sempron(tm) Processor 2600+ processors (1 cpu cores) (version 2.20.00) [ 25.108125] powernow-k8: 0 : fid 0x8 (1600 MHz), vid 0x6 [ 25.108189] powernow-k8: 1 : fid 0x0 (800 MHz), vid 0x18 [ 25.117568] powernow-k8: ph2 null fid transition 0x8 [ 25.245082] input: PS/2 Mouse as /class/input/input6 [ 25.268164] input: AlpsPS/2 ALPS GlidePoint as /class/input/input7 [ 25.380169] Linux agpgart interface v0.103 [ 25.541038] [drm] Initialized drm 1.1.0 20060810 [ 25.578665] mice: PS/2 mouse device common for all mice [ 25.656064] ACPI: PCI Interrupt 0000:01:00.0[A] -> GSI 16 (level, low) -> IRQ 16 [ 25.657015] [drm] Initialized via 2.11.1 20070202 on minor 0 [ 25.708000] leds_clevo_mail: 'Clevo D410J' found [ 25.708413] Registered led device: clevo::mail [ 35.638131] ReiserFS: hda1: found reiserfs format "3.6" with standard journal [ 35.638225] ReiserFS: hda1: using ordered data mode [ 35.642542] ReiserFS: hda1: journal params: device hda1, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30 [ 35.643662] ReiserFS: hda1: checking transaction log (hda1) [ 35.709971] ReiserFS: hda1: Using r5 hash to sort names [ 37.113001] ip_tables: (C) 2000-2006 Netfilter Core Team [ 37.415105] eth0: link up, 100Mbps, full-duplex, lpa 0x41E1 [ 39.082787] NET: Registered protocol family 10 [ 45.236198] lp0: using parport0 (interrupt-driven). [ 45.259535] ppdev: user-space parallel port driver [ 46.464931] Clocksource tsc unstable (delta = -243617390 ns) [ 49.758986] eth0: no IPv6 routers present [ 52.960680] warning: `avahi-daemon' uses 32-bit capabilities (legacy support in use) [ 65.452182] ACPI thermal trips update, flag is c [ 65.452198] Checking valid passive trip point... [ 65.453209] Checking valid active[0] trip point... [ 65.453296] Checking invalid active[1] trip point... [ 110.451483] ACPI thermal trips update, flag is c [ 110.451498] Checking valid passive trip point... [ 110.452470] Checking valid active[0] trip point... [ 110.452557] Checking invalid active[1] trip point... [ 112.384839] irq 16: nobody cared (try booting with the "irqpoll" option) [ 112.384839] Pid: 0, comm: swapper Not tainted 2.6.25-rc4 #6 [ 112.384839] [<c0157227>] __report_bad_irq+0x27/0x90 [ 112.384839] [<c01574c6>] note_interrupt+0x236/0x270 [ 112.384839] [<c01568d3>] ? handle_IRQ_event+0x53/0x60 [ 112.384839] [<c0157b6a>] handle_fasteoi_irq+0x7a/0xd0 [ 112.384839] [<c0106174>] do_IRQ+0x44/0xa0 [ 112.384839] [<c0104c66>] common_interrupt+0x2e/0x34 [ 112.384839] [<c03023e8>] ? _spin_unlock_irq+0x28/0x50 [ 112.384839] [<c0118974>] finish_task_switch+0x54/0xc0 [ 112.384839] [<c0118920>] ? finish_task_switch+0x0/0xc0 [ 112.384839] [<c02ffc46>] schedule+0x2b6/0x470 [ 112.384839] [<f892fdae>] ? acpi_processor_idle+0x0/0x436 [processor] [ 112.384839] [<c0102b65>] cpu_idle+0xb5/0xd0 [ 112.384839] [<c02faf8c>] rest_init+0x5c/0x60 [ 112.384839] ======================= [ 112.384839] handlers: [ 112.384839] [<f8918830>] (yenta_interrupt+0x0/0xe0 [yenta_socket]) [ 112.384839] [<f8bf13f0>] (via_driver_irq_handler+0x0/0x1c0 [via]) [ 112.384839] Disabling IRQ #16 [-- Attachment #3: Clevo-D410J-thermal-fix.txt --] [-- Type: text/plain, Size: 31322 bytes --] [ 0.000000] Linux version 2.6.25-rc4 (nmarci@europa) (gcc version 4.2.3 20080114 (prerelease) (Debian 4.2.2-7)) #7 PREEMPT Sat Mar 8 08:28:09 CET 2008 [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f800 (usable) [ 0.000000] BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved) [ 0.000000] BIOS-e820: 00000000000d8000 - 0000000000100000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 000000003bf70000 (usable) [ 0.000000] BIOS-e820: 000000003bf70000 - 000000003bf7a000 (ACPI data) [ 0.000000] BIOS-e820: 000000003bf7a000 - 000000003bf80000 (ACPI NVS) [ 0.000000] BIOS-e820: 000000003bf80000 - 0000000040000000 (reserved) [ 0.000000] BIOS-e820: 00000000fffe0000 - 0000000100000000 (reserved) [ 0.000000] 63MB HIGHMEM available. [ 0.000000] 896MB LOWMEM available. [ 0.000000] Scan SMP from c0000000 for 1024 bytes. [ 0.000000] Scan SMP from c009fc00 for 1024 bytes. [ 0.000000] Scan SMP from c00f0000 for 65536 bytes. [ 0.000000] found SMP MP-table at [c00f6870] 000f6870 [ 0.000000] Entering add_active_range(0, 0, 245616) 0 entries of 256 used [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0 -> 4096 [ 0.000000] Normal 4096 -> 229376 [ 0.000000] HighMem 229376 -> 245616 [ 0.000000] Movable zone start PFN for each node [ 0.000000] early_node_map[1] active PFN ranges [ 0.000000] 0: 0 -> 245616 [ 0.000000] On node 0 totalpages: 245616 [ 0.000000] DMA zone: 32 pages used for memmap [ 0.000000] DMA zone: 0 pages reserved [ 0.000000] DMA zone: 4064 pages, LIFO batch:0 [ 0.000000] Normal zone: 1760 pages used for memmap [ 0.000000] Normal zone: 223520 pages, LIFO batch:31 [ 0.000000] HighMem zone: 126 pages used for memmap [ 0.000000] HighMem zone: 16114 pages, LIFO batch:3 [ 0.000000] Movable zone: 0 pages used for memmap [ 0.000000] DMI present. [ 0.000000] ACPI: RSDP 000F68D0, 0014 (r0 PTLTD ) [ 0.000000] ACPI: RSDT 3BF7600B, 0030 (r1 PTLTD RSDT 6040000 LTP 0) [ 0.000000] ACPI: FACP 3BF79E87, 0074 (r1 AMDK8 PTLTW 6040000 PTL_ F4240) [ 0.000000] ACPI: DSDT 3BF7603B, 3E4C (r1 VIA PTL_ACPI 6040000 MSFT 100000E) [ 0.000000] ACPI: FACS 3BF7AFC0, 0040 [ 0.000000] ACPI: SSDT 3BF79EFB, 00B5 (r1 PTLTD POWERNOW 6040000 LTP 1) [ 0.000000] ACPI: APIC 3BF79FB0, 0050 (r1 PTLTD APIC 6040000 LTP 0) [ 0.000000] ACPI: PM-Timer IO Port: 0x4008 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) [ 0.000000] Processor #0 15:12 APIC version 16 [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) [ 0.000000] ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 1, version 3, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 high edge) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] ACPI: IRQ10 used by override. [ 0.000000] Enabling APIC mode: Flat. Using 1 I/O APICs [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] Allocating PCI resources starting at 50000000 (gap: 40000000:bffe0000) [ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000 [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000d8000 [ 0.000000] PM: Registered nosave memory: 00000000000d8000 - 0000000000100000 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 243698 [ 0.000000] Kernel command line: root=/dev/hda3 ro log_buf_len=1M resume=/dev/hda2 [ 0.000000] log_buf_len: 1048576 [ 0.000000] mapped APIC to ffffb000 (fee00000) [ 0.000000] mapped IOAPIC to ffffa000 (fec00000) [ 0.000000] Enabling fast FPU save and restore... done. [ 0.000000] Enabling unmasked SIMD FPU exception support... done. [ 0.000000] Initializing CPU#0 [ 0.000000] PID hash table entries: 4096 (order: 12, 16384 bytes) [ 0.000000] Detected 1603.695 MHz processor. [ 0.000999] Console: colour VGA+ 80x25 [ 0.000999] console [tty0] enabled [ 0.000999] Lock dependency validator: Copyright (c) 2006 Red Hat, Inc., Ingo Molnar [ 0.000999] ... MAX_LOCKDEP_SUBCLASSES: 8 [ 0.000999] ... MAX_LOCK_DEPTH: 48 [ 0.000999] ... MAX_LOCKDEP_KEYS: 2048 [ 0.000999] ... CLASSHASH_SIZE: 1024 [ 0.000999] ... MAX_LOCKDEP_ENTRIES: 8192 [ 0.000999] ... MAX_LOCKDEP_CHAINS: 16384 [ 0.000999] ... CHAINHASH_SIZE: 8192 [ 0.000999] memory used by lock dependency info: 992 kB [ 0.000999] per task-struct memory footprint: 1920 bytes [ 0.000999] ------------------------ [ 0.000999] | Locking API testsuite: [ 0.000999] ---------------------------------------------------------------------------- [ 0.000999] | spin |wlock |rlock |mutex | wsem | rsem | [ 0.000999] -------------------------------------------------------------------------- [ 0.000999] A-A deadlock: ok | ok | ok | ok | ok | ok | [ 0.000999] A-B-B-A deadlock: ok | ok | ok | ok | ok | ok | [ 0.000999] A-B-B-C-C-A deadlock: ok | ok | ok | ok | ok | ok | [ 0.000999] A-B-C-A-B-C deadlock: ok | ok | ok | ok | ok | ok | [ 0.000999] A-B-B-C-C-D-D-A deadlock: ok | ok | ok | ok | ok | ok | [ 0.000999] A-B-C-D-B-D-D-A deadlock: ok | ok | ok | ok | ok | ok | [ 0.000999] A-B-C-D-B-C-D-A deadlock: ok | ok | ok | ok | ok | ok | [ 0.000999] double unlock: ok | ok | ok | ok | ok | ok | [ 0.000999] initialize held: ok | ok | ok | ok | ok | ok | [ 0.000999] bad unlock order: ok | ok | ok | ok | ok | ok | [ 0.000999] -------------------------------------------------------------------------- [ 0.000999] recursive read-lock: | ok | | ok | [ 0.000999] recursive read-lock #2: | ok | | ok | [ 0.000999] mixed read-write-lock: | ok | | ok | [ 0.000999] mixed write-read-lock: | ok | | ok | [ 0.000999] -------------------------------------------------------------------------- [ 0.000999] hard-irqs-on + irq-safe-A/12: ok | ok | ok | [ 0.000999] soft-irqs-on + irq-safe-A/12: ok | ok | ok | [ 0.000999] hard-irqs-on + irq-safe-A/21: ok | ok | ok | [ 0.000999] soft-irqs-on + irq-safe-A/21: ok | ok | ok | [ 0.000999] sirq-safe-A => hirqs-on/12: ok | ok | ok | [ 0.000999] sirq-safe-A => hirqs-on/21: ok | ok | ok | [ 0.000999] hard-safe-A + irqs-on/12: ok | ok | ok | [ 0.000999] soft-safe-A + irqs-on/12: ok | ok | ok | [ 0.000999] hard-safe-A + irqs-on/21: ok | ok | ok | [ 0.000999] soft-safe-A + irqs-on/21: ok | ok | ok | [ 0.000999] hard-safe-A + unsafe-B #1/123: ok | ok | ok | [ 0.000999] soft-safe-A + unsafe-B #1/123: ok | ok | ok | [ 0.000999] hard-safe-A + unsafe-B #1/132: ok | ok | ok | [ 0.000999] soft-safe-A + unsafe-B #1/132: ok | ok | ok | [ 0.000999] hard-safe-A + unsafe-B #1/213: ok | ok | ok | [ 0.000999] soft-safe-A + unsafe-B #1/213: ok | ok | ok | [ 0.000999] hard-safe-A + unsafe-B #1/231: ok | ok | ok | [ 0.000999] soft-safe-A + unsafe-B #1/231: ok | ok | ok | [ 0.000999] hard-safe-A + unsafe-B #1/312: ok | ok | ok | [ 0.000999] soft-safe-A + unsafe-B #1/312: ok | ok | ok | [ 0.000999] hard-safe-A + unsafe-B #1/321: ok | ok | ok | [ 0.000999] soft-safe-A + unsafe-B #1/321: ok | ok | ok | [ 0.000999] hard-safe-A + unsafe-B #2/123: ok | ok | ok | [ 0.000999] soft-safe-A + unsafe-B #2/123: ok | ok | ok | [ 0.000999] hard-safe-A + unsafe-B #2/132: ok | ok | ok | [ 0.000999] soft-safe-A + unsafe-B #2/132: ok | ok | ok | [ 0.000999] hard-safe-A + unsafe-B #2/213: ok | ok | ok | [ 0.000999] soft-safe-A + unsafe-B #2/213: ok | ok | ok | [ 0.000999] hard-safe-A + unsafe-B #2/231: ok | ok | ok | [ 0.000999] soft-safe-A + unsafe-B #2/231: ok | ok | ok | [ 0.000999] hard-safe-A + unsafe-B #2/312: ok | ok | ok | [ 0.000999] soft-safe-A + unsafe-B #2/312: ok | ok | ok | [ 0.000999] hard-safe-A + unsafe-B #2/321: ok | ok | ok | [ 0.000999] soft-safe-A + unsafe-B #2/321: ok | ok | ok | [ 0.000999] hard-irq lock-inversion/123: ok | ok | ok | [ 0.000999] soft-irq lock-inversion/123: ok | ok | ok | [ 0.000999] hard-irq lock-inversion/132: ok | ok | ok | [ 0.000999] soft-irq lock-inversion/132: ok | ok | ok | [ 0.000999] hard-irq lock-inversion/213: ok | ok | ok | [ 0.000999] soft-irq lock-inversion/213: ok | ok | ok | [ 0.000999] hard-irq lock-inversion/231: ok | ok | ok | [ 0.000999] soft-irq lock-inversion/231: ok | ok | ok | [ 0.000999] hard-irq lock-inversion/312: ok | ok | ok | [ 0.000999] soft-irq lock-inversion/312: ok | ok | ok | [ 0.000999] hard-irq lock-inversion/321: ok | ok | ok | [ 0.000999] soft-irq lock-inversion/321: ok | ok | ok | [ 0.000999] hard-irq read-recursion/123: ok | [ 0.000999] soft-irq read-recursion/123: ok | [ 0.000999] hard-irq read-recursion/132: ok | [ 0.000999] soft-irq read-recursion/132: ok | [ 0.000999] hard-irq read-recursion/213: ok | [ 0.000999] soft-irq read-recursion/213: ok | [ 0.000999] hard-irq read-recursion/231: ok | [ 0.000999] soft-irq read-recursion/231: ok | [ 0.000999] hard-irq read-recursion/312: ok | [ 0.000999] soft-irq read-recursion/312: ok | [ 0.000999] hard-irq read-recursion/321: ok | [ 0.000999] soft-irq read-recursion/321: ok | [ 0.000999] ------------------------------------------------------- [ 0.000999] Good, all 218 testcases passed! | [ 0.000999] --------------------------------- [ 0.000999] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) [ 0.000999] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) [ 0.000999] Memory: 966876k/982464k available (2073k kernel code, 15072k reserved, 889k data, 272k init, 64960k highmem) [ 0.000999] virtual kernel memory layout: [ 0.000999] fixmap : 0xfffa8000 - 0xfffff000 ( 348 kB) [ 0.000999] pkmap : 0xff800000 - 0xffc00000 (4096 kB) [ 0.000999] vmalloc : 0xf8800000 - 0xff7fe000 ( 111 MB) [ 0.000999] lowmem : 0xc0000000 - 0xf8000000 ( 896 MB) [ 0.000999] .init : 0xc03e8000 - 0xc042c000 ( 272 kB) [ 0.000999] .data : 0xc030654b - 0xc03e4c18 ( 889 kB) [ 0.000999] .text : 0xc0100000 - 0xc030654b (2073 kB) [ 0.000999] Checking if this processor honours the WP bit even in supervisor mode...Ok. [ 0.000999] CPA: page pool initialized 1 of 1 pages preallocated [ 0.060995] Calibrating delay using timer specific routine.. 3210.53 BogoMIPS (lpj=1605269) [ 0.061255] Mount-cache hash table entries: 512 [ 0.062189] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) [ 0.062995] CPU: L2 Cache: 128K (64 bytes/line) [ 0.063052] Intel machine check architecture supported. [ 0.063109] Intel machine check reporting enabled on CPU#0. [ 0.063172] Compat vDSO mapped to ffffe000. [ 0.063232] CPU: AMD Mobile AMD Sempron(tm) Processor 2600+ stepping 00 [ 0.063408] Checking 'hlt' instruction... OK. [ 0.067332] Freeing SMP alternatives: 0k freed [ 0.067388] ACPI: Core revision 20070126 [ 0.075699] Parsing all Control Methods: [ 0.075829] Table [DSDT](id 0001) - 480 Objects with 49 Devices 147 Methods 13 Regions [ 0.076041] Parsing all Control Methods: [ 0.076162] Table [SSDT](id 0002) - 3 Objects with 0 Devices 0 Methods 0 Regions [ 0.076278] tbxface-0598 [00] tb_load_namespace : ACPI Tables successfully acquired [ 0.077049] evxfevnt-0091 [00] enable : Transition to ACPI mode successful [ 0.078952] ENABLING IO-APIC IRQs [ 0.078988] ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=0 pin2=0 [ 0.088986] net_namespace: 604 bytes [ 0.089545] NET: Registered protocol family 16 [ 0.090470] EISA bus registered [ 0.090552] ACPI: bus type pci registered [ 0.098184] PCI: PCI BIOS revision 2.10 entry at 0xfd88c, last bus=1 [ 0.098245] PCI: Using configuration type 1 [ 0.098300] Setting up standard PCI resources [ 0.102693] evgpeblk-0956 [00] ev_create_gpe_block : GPE 00 to 0F [_GPE] 2 regs on int 0xA [ 0.103506] evgpeblk-1052 [00] ev_initialize_gpe_bloc: Found 4 Wake, Enabled 0 Runtime GPEs in this block [ 0.103662] ACPI: EC: Look up EC in DSDT [ 0.105968] Completing Region/Field/Buffer/Package initialization:..................................................... [ 0.112060] Initialized 11/13 Regions 1/1 Fields 23/24 Buffers 18/26 Packages (492 nodes) [ 0.112177] Initializing Device/Processor/Thermal objects by executing _INI methods:. [ 0.112526] Executed 1 _INI methods requiring 1 _STA executions (examined 53 objects) [ 0.112716] ACPI: Interpreter enabled [ 0.112771] ACPI: (supports S0 S3 S4 S5) [ 0.113077] ACPI: Using IOAPIC for interrupt routing [ 0.124788] ACPI: EC: non-query interrupt received, switching to interrupt mode [ 0.179757] ACPI: EC: GPE = 0xb, I/O: command/status = 0x66, data = 0x62 [ 0.179821] ACPI: EC: driver started in interrupt mode [ 0.180082] ACPI: PCI Root Bridge [PCI0] (0000:00) [ 0.181352] pci 0000:00:11.0: quirk: region 4000-407f claimed by vt8235 PM [ 0.181414] pci 0000:00:11.0: quirk: region 8100-810f claimed by vt8235 SMB [ 0.181980] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 0.202274] ACPI: PCI Interrupt Link [ALKA] (IRQs 16 17 18 19 20 21 22 23) *9, disabled. [ 0.203004] ACPI: PCI Interrupt Link [ALKB] (IRQs 16 17 18 19 20 21 22 23) *11, disabled. [ 0.203688] ACPI: PCI Interrupt Link [ALKC] (IRQs 22) *10, disabled. [ 0.204105] ACPI: PCI Interrupt Link [ALKD] (IRQs 21) *5, disabled. [ 0.204594] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 7 *9 12 14 15) [ 0.205274] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 7 10 12 14 15) *11 [ 0.206020] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 7 11 12 14 15) *10 [ 0.206725] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 *5 7 9 10 11 12 14 15) [ 0.207652] Linux Plug and Play Support v0.97 (c) Adam Belay [ 0.207835] pnp: PnP ACPI init [ 0.207979] ACPI: bus type pnp registered [ 0.210152] pnp 00:00: Plug and Play ACPI device, IDs PNP0a03 (active) [ 0.210904] pnp 00:01: Plug and Play ACPI device, IDs PNP0200 (active) [ 0.211183] pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active) [ 0.211452] pnp 00:03: Plug and Play ACPI device, IDs PNP0c04 (active) [ 0.211707] pnp 00:04: Plug and Play ACPI device, IDs PNP0800 (active) [ 0.211833] 00:05: calling quirk 0xc025ae70: quirk_supermicro_h8dce_system+0x0/0x110() [ 0.212060] pnp 00:05: Plug and Play ACPI device, IDs PNP0c01 (active) [ 0.212369] 00:06: calling quirk 0xc025ae70: quirk_supermicro_h8dce_system+0x0/0x110() [ 0.212568] pnp 00:06: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.212825] pnp 00:07: Plug and Play ACPI device, IDs PNP0f13 (active) [ 0.213087] pnp 00:08: Plug and Play ACPI device, IDs PNP0303 (active) [ 0.214222] pnp 00:09: Plug and Play ACPI device, IDs PNP0501 (active) [ 0.215437] pnp 00:0a: Plug and Play ACPI device, IDs PNP0401 (active) [ 0.716893] ACPI: EC: missing write data confirmation, don't expect it any longer. [ 0.716893] pnp: PnP ACPI: found 11 devices [ 0.716893] ACPI: ACPI bus type pnp unregistered [ 0.717122] PCI: Using ACPI for IRQ routing [ 0.717182] PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report [ 0.721713] pnp: the driver 'system' has been registered [ 0.721749] system 00:05: iomem range 0x0-0x9ffff could not be reserved [ 0.721812] system 00:05: iomem range 0xe0000-0xfffff could not be reserved [ 0.721874] system 00:05: iomem range 0xfff00000-0xffffffff could not be reserved [ 0.721892] Time: tsc clocksource has been installed. [ 0.721899] system 00:05: iomem range 0xffee0000-0xffefffff has been reserved [ 0.721970] system 00:05: iomem range 0xfec00000-0xfec00fff has been reserved [ 0.722030] system 00:05: iomem range 0xfee00000-0xfee00fff has been reserved [ 0.722089] system 00:05: driver attached [ 0.722102] system 00:06: ioport range 0x4d0-0x4d1 has been reserved [ 0.722162] system 00:06: ioport range 0xfe10-0xfe11 has been reserved [ 0.722221] system 00:06: ioport range 0xfe00-0xfe00 has been reserved [ 0.722279] system 00:06: ioport range 0x4000-0x407f has been reserved [ 0.722339] system 00:06: ioport range 0x8100-0x811f could not be reserved [ 0.722398] system 00:06: driver attached [ 0.754398] PCI: Bridge: 0000:00:01.0 [ 0.754456] IO window: disabled. [ 0.754513] MEM window: 0xd1000000-0xd1ffffff [ 0.754571] PREFETCH window: 0x00000000f0000000-0x00000000f3ffffff [ 0.754633] PCI: Bus 2, cardbus bridge: 0000:00:0c.0 [ 0.754688] IO window: 0x00002000-0x000020ff [ 0.754745] IO window: 0x00002400-0x000024ff [ 0.754802] PREFETCH window: 0x50000000-0x53ffffff [ 0.754860] MEM window: 0x54000000-0x57ffffff [ 0.754919] PCI: Setting latency timer of device 0000:00:01.0 to 64 [ 0.754933] PCI: Enabling device 0000:00:0c.0 (0000 -> 0003) [ 0.755001] ACPI: PCI Interrupt 0000:00:0c.0[A] -> GSI 16 (level, low) -> IRQ 16 [ 0.755116] PCI: Setting latency timer of device 0000:00:0c.0 to 64 [ 0.755186] NET: Registered protocol family 2 [ 0.755497] IP route cache hash table entries: 32768 (order: 5, 131072 bytes) [ 0.756308] TCP established hash table entries: 131072 (order: 8, 1048576 bytes) [ 0.757580] TCP bind hash table entries: 65536 (order: 9, 2097152 bytes) [ 0.763772] TCP: Hash tables configured (established 131072 bind 65536) [ 0.763870] TCP reno registered [ 0.766722] audit: initializing netlink socket (disabled) [ 0.766836] type=2000 audit(1204965085.765:1): initialized [ 0.767283] highmem bounce pool size: 64 pages [ 0.768075] io scheduler noop registered [ 0.768150] io scheduler cfq registered (default) [ 0.768229] PCI: VIA PCI bridge detected. Disabling DAC. [ 0.768364] pci 0000:01:00.0: Boot video device [ 0.768771] isapnp: Scanning for PnP cards... [ 1.125810] isapnp: No Plug & Play device found [ 1.213098] Uniform Multi-Platform E-IDE driver [ 1.213162] ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx [ 1.213393] VP_IDE: IDE controller (0x1106:0x0571 rev 0x06) at PCI slot 0000:00:11.1 [ 1.213709] ACPI: PCI Interrupt Link [ALKA] disabled and referenced, BIOS bug [ 1.213892] ACPI: PCI Interrupt Link [ALKA] BIOS reported IRQ 0, using IRQ 23 [ 1.213951] ACPI: PCI Interrupt Link [ALKA] enabled at IRQ 23 [ 1.214015] ACPI: PCI Interrupt 0000:00:11.1[A] -> Link [ALKA] -> GSI 23 (level, low) -> IRQ 23 [ 1.214175] VP_IDE: not 100% native mode: will probe irqs later [ 1.214244] VP_IDE: VIA vt8235 (rev 00) IDE UDMA133 controller on pci0000:00:11.1 [ 1.214320] ide0: BM-DMA at 0x1c60-0x1c67, BIOS settings: hda:DMA, hdb:PIO [ 1.214439] ide1: BM-DMA at 0x1c68-0x1c6f, BIOS settings: hdc:DMA, hdd:PIO [ 1.214550] Probing IDE interface ide0... [ 1.254849] Switched to high resolution mode on CPU 0 [ 1.753341] hdb: IRQ probe failed (0xfffffbfe) [ 2.027459] hdb: IRQ probe failed (0xfffffbfe) [ 2.454559] hda: SAMSUNG MP0804H, ATA DISK drive [ 2.454559] hda: host max PIO5 wanted PIO255(auto-tune) selected PIO4 [ 2.454559] hda: UDMA/100 mode selected [ 2.454559] Probing IDE interface ide1... [ 3.858836] hdc: Optiarc DVD RW AD-7543A, ATAPI CD/DVD-ROM drive [ 3.858836] hdc: host max PIO5 wanted PIO255(auto-tune) selected PIO4 [ 3.858836] hdc: UDMA/33 mode selected [ 3.858836] ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 [ 3.955217] ide1 at 0x170-0x177,0x376 on irq 15 [ 3.956394] pnp: the driver 'ide' has been registered [ 3.956587] hda: max request size: 512KiB [ 3.956738] hda: 156368016 sectors (80060 MB) w/8192KiB Cache, CHS=16383/255/63 [ 3.957306] hda: cache flushes supported [ 3.957306] hda: hda1 hda2 hda3 [ 3.967508] TCP cubic registered [ 3.967590] NET: Registered protocol family 1 [ 3.967671] NET: Registered protocol family 17 [ 3.967753] Using IPI Shortcut mode [ 4.002215] ReiserFS: hda3: found reiserfs format "3.6" with standard journal [ 4.002215] ReiserFS: hda3: using ordered data mode [ 4.010740] ReiserFS: hda3: journal params: device hda3, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30 [ 4.011429] ReiserFS: hda3: checking transaction log (hda3) [ 4.090884] ReiserFS: hda3: Using r5 hash to sort names [ 4.090884] VFS: Mounted root (reiserfs filesystem) readonly. [ 4.090912] Freeing unused kernel memory: 272k freed [ 4.090990] Write protecting the kernel read-only data: 728k [ 9.361188] ACPI: CPU0 (power states: C1[C1] C2[C2]) [ 9.361575] ACPI: ACPI0007:00 is registered as cooling_device0 [ 9.376116] input: Power Button (FF) as /class/input/input0 [ 9.380188] ACPI: Power Button (FF) [PWRF] [ 9.380461] input: Power Button (CM) as /class/input/input1 [ 9.384134] ACPI: Power Button (CM) [PWB] [ 9.384375] input: Sleep Button (CM) as /class/input/input2 [ 9.388117] ACPI: Sleep Button (CM) [SLPB] [ 9.388334] input: Lid Switch as /class/input/input3 [ 9.388654] ACPI: Lid Switch [LID] [ 9.406233] ACPI thermal trips update, flag is 1f [ 9.406368] Checking invalid passive trip point... [ 9.406913] Checking invalid active[0] trip point... [ 9.407494] ACPI: LNXTHERM:01 is registered as thermal_zone0 [ 9.407900] ACPI: Thermal Zone [THRM] (52 C) [ 9.427976] ACPI: AC Adapter [AC] (on-line) [ 9.445456] ACPI: Battery Slot [BAT0] (battery present) [ 10.061992] Marking TSC unstable due to: possible TSC halt in C2. [ 10.063180] Time: acpi_pm clocksource has been installed. [ 10.064517] 8139too Fast Ethernet driver 0.9.28 [ 10.064652] ACPI: PCI Interrupt 0000:00:08.0[A] -> GSI 19 (level, low) -> IRQ 19 [ 10.066607] eth0: RealTek RTL8139 at 0xf88e6000, 00:90:f5:3e:5a:ca, IRQ 19 [ 10.066667] eth0: Identified 8139 chip type 'RTL-8100B/8139D' [ 10.448212] usbcore: registered new interface driver usbfs [ 10.448412] usbcore: registered new interface driver hub [ 10.450627] usbcore: registered new device driver usb [ 10.585946] hdc: ATAPI 24X DVD-ROM DVD-R-RAM CD-R/RW drive, 2048kB Cache [ 10.586244] Uniform CD-ROM driver Revision: 3.20 [ 10.670328] Real Time Clock Driver v1.12ac [ 10.726716] input: PC Speaker as /class/input/input4 [ 10.863323] pnp: the driver 'parport_pc' has been registered [ 10.863357] parport_pc 00:0a: reported by Plug and Play ACPI [ 10.863683] parport0: PC-style at 0x378 (0x778), irq 7, dma 1 [PCSPP,TRISTATE,COMPAT,ECP,DMA] [ 10.943313] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing disabled [ 10.944136] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 10.948101] parport_pc 00:0a: driver attached [ 10.964826] Yenta: CardBus bridge found at 0000:00:0c.0 [1558:4702] [ 10.964913] Yenta: Using CSCINT to route CSC interrupts to PCI [ 10.964970] Yenta: Routing CardBus interrupts to PCI [ 10.965028] Yenta TI: socket 0000:00:0c.0, mfunc 0x00001002, devctl 0x44 [ 11.095213] pnp: the driver 'serial' has been registered [ 11.103937] 00:09: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 11.104212] serial 00:09: driver attached [ 11.126727] USB Universal Host Controller Interface driver v3.0 [ 11.188297] Yenta: ISA IRQ mask 0x0848, PCI irq 16 [ 11.188360] Socket status: 30000006 [ 11.208643] ACPI: PCI Interrupt Link [ALKD] disabled and referenced, BIOS bug [ 11.209031] ACPI: PCI Interrupt Link [ALKD] BIOS reported IRQ 0, using IRQ 21 [ 11.209092] ACPI: PCI Interrupt Link [ALKD] enabled at IRQ 21 [ 11.209157] ACPI: PCI Interrupt 0000:00:10.0[A] -> Link [ALKD] -> GSI 21 (level, low) -> IRQ 21 [ 11.209324] uhci_hcd 0000:00:10.0: UHCI Host Controller [ 11.216794] uhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 1 [ 11.216918] uhci_hcd 0000:00:10.0: irq 21, io base 0x00001c00 [ 11.219799] usb usb1: configuration #1 chosen from 1 choice [ 11.221083] hub 1-0:1.0: USB hub found [ 11.221912] hub 1-0:1.0: 2 ports detected [ 11.325919] ACPI: PCI Interrupt 0000:00:10.1[B] -> Link [ALKD] -> GSI 21 (level, low) -> IRQ 21 [ 11.326090] uhci_hcd 0000:00:10.1: UHCI Host Controller [ 11.326230] uhci_hcd 0000:00:10.1: new USB bus registered, assigned bus number 2 [ 11.326336] uhci_hcd 0000:00:10.1: irq 21, io base 0x00001c20 [ 11.326746] usb usb2: configuration #1 chosen from 1 choice [ 11.326874] hub 2-0:1.0: USB hub found [ 11.326949] hub 2-0:1.0: 2 ports detected [ 11.427760] ACPI: PCI Interrupt 0000:00:10.2[C] -> Link [ALKD] -> GSI 21 (level, low) -> IRQ 21 [ 11.427932] uhci_hcd 0000:00:10.2: UHCI Host Controller [ 11.428073] uhci_hcd 0000:00:10.2: new USB bus registered, assigned bus number 3 [ 11.428190] uhci_hcd 0000:00:10.2: irq 21, io base 0x00001c40 [ 11.428598] usb usb3: configuration #1 chosen from 1 choice [ 11.428737] hub 3-0:1.0: USB hub found [ 11.428812] hub 3-0:1.0: 2 ports detected [ 11.526327] ACPI: PCI Interrupt 0000:00:10.3[D] -> Link [ALKD] -> GSI 21 (level, low) -> IRQ 21 [ 11.526510] ehci_hcd 0000:00:10.3: EHCI Host Controller [ 11.526672] ehci_hcd 0000:00:10.3: new USB bus registered, assigned bus number 4 [ 11.526825] ehci_hcd 0000:00:10.3: irq 21, io mem 0xd0004400 [ 11.532952] ehci_hcd 0000:00:10.3: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 [ 11.533358] usb usb4: configuration #1 chosen from 1 choice [ 11.533500] hub 4-0:1.0: USB hub found [ 11.533937] hub 4-0:1.0: 6 ports detected [ 11.633343] ACPI: PCI Interrupt Link [ALKC] disabled and referenced, BIOS bug [ 11.633518] ACPI: PCI Interrupt Link [ALKC] BIOS reported IRQ 0, using IRQ 22 [ 11.633579] ACPI: PCI Interrupt Link [ALKC] enabled at IRQ 22 [ 11.633643] ACPI: PCI Interrupt 0000:00:11.6[C] -> Link [ALKC] -> GSI 22 (level, low) -> IRQ 22 [ 11.634318] PCI: Setting latency timer of device 0000:00:11.6 to 64 [ 11.930379] cs: IO port probe 0x100-0x4ff: clean. [ 11.933814] cs: IO port probe 0x800-0x8ff: clean. [ 11.935262] cs: IO port probe 0xc00-0xcff: clean. [ 11.936601] cs: IO port probe 0xa00-0xaff: clean. [ 12.138085] ACPI: PCI Interrupt 0000:00:11.5[C] -> Link [ALKC] -> GSI 22 (level, low) -> IRQ 22 [ 12.138447] PCI: Setting latency timer of device 0000:00:11.5 to 64 [ 14.809747] Adding 1951888k swap on /dev/hda2. Priority:-1 extents:1 across:1951888k [ 25.861658] pnp: the driver 'i8042 kbd' has been registered [ 25.861700] i8042 kbd 00:08: driver attached [ 25.861743] pnp: the driver 'i8042 aux' has been registered [ 25.861769] i8042 aux 00:07: driver attached [ 25.861805] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12 [ 25.864317] i8042.c: Detected active multiplexing controller, rev 1.1. [ 25.865882] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 25.870494] serio: i8042 AUX0 port at 0x60,0x64 irq 12 [ 25.870597] serio: i8042 AUX1 port at 0x60,0x64 irq 12 [ 25.870655] serio: i8042 AUX2 port at 0x60,0x64 irq 12 [ 25.870712] serio: i8042 AUX3 port at 0x60,0x64 irq 12 [ 25.895252] input: AT Translated Set 2 keyboard as /class/input/input5 [ 26.352467] input: PS/2 Mouse as /class/input/input6 [ 26.368240] powernow-k8: Found 1 Mobile AMD Sempron(tm) Processor 2600+ processors (1 cpu cores) (version 2.20.00) [ 26.371532] input: AlpsPS/2 ALPS GlidePoint as /class/input/input7 [ 26.371619] powernow-k8: 0 : fid 0x8 (1600 MHz), vid 0x6 [ 26.371676] powernow-k8: 1 : fid 0x0 (800 MHz), vid 0x18 [ 26.386974] powernow-k8: ph2 null fid transition 0x8 [ 26.420489] mice: PS/2 mouse device common for all mice [ 26.703416] Linux agpgart interface v0.103 [ 26.916272] [drm] Initialized drm 1.1.0 20060810 [ 26.998818] ACPI: PCI Interrupt 0000:01:00.0[A] -> GSI 16 (level, low) -> IRQ 16 [ 26.999692] [drm] Initialized via 2.11.1 20070202 on minor 0 [ 27.036657] leds_clevo_mail: 'Clevo D410J' found [ 27.037222] Registered led device: clevo::mail [ 36.785700] ReiserFS: hda1: found reiserfs format "3.6" with standard journal [ 36.785700] ReiserFS: hda1: using ordered data mode [ 36.789716] ReiserFS: hda1: journal params: device hda1, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30 [ 36.790218] ReiserFS: hda1: checking transaction log (hda1) [ 36.856539] ReiserFS: hda1: Using r5 hash to sort names [ 38.259715] ip_tables: (C) 2000-2006 Netfilter Core Team [ 38.559206] eth0: link up, 100Mbps, full-duplex, lpa 0x41E1 [ 40.145900] NET: Registered protocol family 10 [ 46.253020] lp0: using parport0 (interrupt-driven). [ 46.286238] ppdev: user-space parallel port driver [ 46.689358] Clocksource tsc unstable (delta = -302659936 ns) [ 50.080148] eth0: no IPv6 routers present [ 53.901672] warning: `avahi-daemon' uses 32-bit capabilities (legacy support in use) [ 111.335078] irq 16: nobody cared (try booting with the "irqpoll" option) [ 111.335078] Pid: 0, comm: swapper Not tainted 2.6.25-rc4 #7 [ 111.335078] [<c0157227>] __report_bad_irq+0x27/0x90 [ 111.335078] [<c01574c6>] note_interrupt+0x236/0x270 [ 111.335078] [<c01568d3>] ? handle_IRQ_event+0x53/0x60 [ 111.335078] [<c0157b6a>] handle_fasteoi_irq+0x7a/0xd0 [ 111.335078] [<c0106174>] do_IRQ+0x44/0xa0 [ 111.335078] [<c0104c66>] common_interrupt+0x2e/0x34 [ 111.335078] [<c03023e8>] ? _spin_unlock_irq+0x28/0x50 [ 111.335078] [<c0118974>] finish_task_switch+0x54/0xc0 [ 111.335078] [<c0118920>] ? finish_task_switch+0x0/0xc0 [ 111.335078] [<c02ffc46>] schedule+0x2b6/0x470 [ 111.335078] [<f892fdae>] ? acpi_processor_idle+0x0/0x436 [processor] [ 111.335078] [<c0102b65>] cpu_idle+0xb5/0xd0 [ 111.335078] [<c02faf8c>] rest_init+0x5c/0x60 [ 111.335078] ======================= [ 111.335078] handlers: [ 111.335078] [<f8971830>] (yenta_interrupt+0x0/0xe0 [yenta_socket]) [ 111.335078] [<f8be03f0>] (via_driver_irq_handler+0x0/0x1c0 [via]) [ 111.335078] Disabling IRQ #16 ^ permalink raw reply [flat|nested] 18+ messages in thread
* Re: AE_ERROR, ACPI thermal trip point state changed 2008-03-08 7:41 ` Németh Márton @ 2008-03-10 1:52 ` Zhang, Rui 2008-08-20 9:08 ` Németh Márton 0 siblings, 1 reply; 18+ messages in thread From: Zhang, Rui @ 2008-03-10 1:52 UTC (permalink / raw) To: Németh Márton; +Cc: linux-acpi, LKML On Sat, 2008-03-08 at 15:41 +0800, Németh Márton wrote: > Zhang, Rui wrote: > > On Fri, 2008-03-07 at 14:54 +0800, Németh Márton wrote: > >> Hi, > >> > >> I downloaded pmtools from > >> > http://www.kernel.org/pub/linux/kernel/people/lenb/acpi/utils/pmtools-20071116.tar.bz2 and > >> compiled: it created exactly the same result what my currently > >> installed acpidump Debian > >> package version 20071116-1. I think it is useless to send the same > log > >> again. > >> > >> After I boot the "Please send acpidump to > linux-acpi@vger.kernel.org" > >> message is already > >> there. So when I first get the prompt I checked for this message in > >> dmesg and executed > >> the given command. Here is my result: > >> > >> # cat /proc/acpi/thermal_zone/*/* > >> 0 - Active; 1 - Passive > >> <polling disabled> > >> state: ok > >> temperature: 42 C > >> critical (S5): 155 C > >> passive: 84 C: tc1=2 tc2=5 tsp=0 devices=CPU0 > >> active[0]: 70 C: devices= > >> # ls /proc/acpi/thermal_zone/*/* > >> /proc/acpi/thermal_zone/THRM/cooling_mode > >> /proc/acpi/thermal_zone/THRM/polling_frequency > >> /proc/acpi/thermal_zone/THRM/state > >> /proc/acpi/thermal_zone/THRM/temperature > >> /proc/acpi/thermal_zone/THRM/trip_points > >> > >> Maybe this is related to > >> http://bugzilla.kernel.org/show_bug.cgi?id=8544 ? > >> > > Hi, Németh, > > > > Please ignore the debug patch I sent and try this one. > > I created both the dmesg logs: > > 1. Clevo-D410J-patch-debug-thermal2.txt: the patch-debug-thermal was > only > applied, (and added a missing "\n"). > > 2. Clevo-D410J-thermal-fix.txt: the thermal-fix patch was also > applied. > In this case the AE_ERROR message is not there any more on Clevo D410J > laptop. > Thanks for your help in debugging this. We will get the "thermal-fix" patch upstream soon. thanks, rui -- To unsubscribe from this list: send the line "unsubscribe linux-acpi" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html ^ permalink raw reply [flat|nested] 18+ messages in thread
* Re: AE_ERROR, ACPI thermal trip point state changed 2008-03-10 1:52 ` Zhang, Rui @ 2008-08-20 9:08 ` Németh Márton 2008-08-20 10:02 ` Andi Kleen 2009-01-15 21:56 ` Len Brown 0 siblings, 2 replies; 18+ messages in thread From: Németh Márton @ 2008-08-20 9:08 UTC (permalink / raw) To: Zhang, Rui; +Cc: linux-acpi, LKML Zhang, Rui wrote: > On Sat, 2008-03-08 at 15:41 +0800, Németh Márton wrote: >> Zhang, Rui wrote: >>> On Fri, 2008-03-07 at 14:54 +0800, Németh Márton wrote: >>>> Hi, >>>> >>>> I downloaded pmtools from >>>> >> http://www.kernel.org/pub/linux/kernel/people/lenb/acpi/utils/pmtools-20071116.tar.bz2 and >>>> compiled: it created exactly the same result what my currently >>>> installed acpidump Debian >>>> package version 20071116-1. I think it is useless to send the same >> log >>>> again. >>>> >>>> After I boot the "Please send acpidump to >> linux-acpi@vger.kernel.org" >>>> message is already >>>> there. So when I first get the prompt I checked for this message in >>>> dmesg and executed >>>> the given command. Here is my result: >>>> >>>> # cat /proc/acpi/thermal_zone/*/* >>>> 0 - Active; 1 - Passive >>>> <polling disabled> >>>> state: ok >>>> temperature: 42 C >>>> critical (S5): 155 C >>>> passive: 84 C: tc1=2 tc2=5 tsp=0 devices=CPU0 >>>> active[0]: 70 C: devices= >>>> # ls /proc/acpi/thermal_zone/*/* >>>> /proc/acpi/thermal_zone/THRM/cooling_mode >>>> /proc/acpi/thermal_zone/THRM/polling_frequency >>>> /proc/acpi/thermal_zone/THRM/state >>>> /proc/acpi/thermal_zone/THRM/temperature >>>> /proc/acpi/thermal_zone/THRM/trip_points >>>> >>>> Maybe this is related to >>>> http://bugzilla.kernel.org/show_bug.cgi?id=8544 ? >>>> >>> Hi, Németh, >>> >>> Please ignore the debug patch I sent and try this one. >> I created both the dmesg logs: >> >> 1. Clevo-D410J-patch-debug-thermal2.txt: the patch-debug-thermal was >> only >> applied, (and added a missing "\n"). >> >> 2. Clevo-D410J-thermal-fix.txt: the thermal-fix patch was also >> applied. >> In this case the AE_ERROR message is not there any more on Clevo D410J >> laptop. >> > Thanks for your help in debugging this. > We will get the "thermal-fix" patch upstream soon. As of 2.6.27-rc3 the patch is still not included in the mainstream. I hope that this patch was not forgotten completely. Márton Németh -- To unsubscribe from this list: send the line "unsubscribe linux-acpi" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html ^ permalink raw reply [flat|nested] 18+ messages in thread
* Re: AE_ERROR, ACPI thermal trip point state changed 2008-08-20 9:08 ` Németh Márton @ 2008-08-20 10:02 ` Andi Kleen 2008-11-19 22:20 ` Németh Márton 2009-01-15 21:56 ` Len Brown 1 sibling, 1 reply; 18+ messages in thread From: Andi Kleen @ 2008-08-20 10:02 UTC (permalink / raw) To: Németh Márton; +Cc: Zhang, Rui, linux-acpi, LKML Németh Márton <nm127@freemail.hu> writes: > > As of 2.6.27-rc3 the patch is still not included in the mainstream. I > hope that this patch was not forgotten completely. It's already in Linus' tree, will be in rc4. -Andi -- To unsubscribe from this list: send the line "unsubscribe linux-acpi" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html ^ permalink raw reply [flat|nested] 18+ messages in thread
* Re: AE_ERROR, ACPI thermal trip point state changed 2008-08-20 10:02 ` Andi Kleen @ 2008-11-19 22:20 ` Németh Márton 2008-11-19 23:22 ` Andi Kleen 0 siblings, 1 reply; 18+ messages in thread From: Németh Márton @ 2008-11-19 22:20 UTC (permalink / raw) To: Andi Kleen; +Cc: Zhang, Rui, linux-acpi, LKML [-- Attachment #1: Type: text/plain, Size: 783 bytes --] Hi, Andi Kleen wrote: > Németh Márton <nm127@freemail.hu> writes: >> As of 2.6.27-rc3 the patch is still not included in the mainstream. I >> hope that this patch was not forgotten completely. > > It's already in Linus' tree, will be in rc4. I compiled and tried 2.6.28-rc5. In the dmesg I get the following message: [ 63.589603] ACPI Exception (thermal-0538): AE_ERROR, ACPI thermal trip point state changed [ 63.589669] Please send acpidump to linux-acpi@vger.kernel.org [ 63.589805] [20080926] The original patch still applies for 2.6.28-rc5 (with some offsets). This patch is not included in 2.6.28-rc5, yet. The "AE_ERROR..." message does not appear any more if I apply the patch. I attached this original patch for easier reference. Regards, Márton Németh [-- Attachment #2: thermal-fix --] [-- Type: text/plain, Size: 2323 bytes --] thermal fixup for broken BIOS which has invalid trip points. ACPI thermal driver only re-evaluate valid trip points. For the broken BIOS show in http://bugzilla.kernel.org/show_bug.cgi?id=8544 the active[0] is set to invalid at boot time and it will not be re-evaluated again. We can still get a warning message at boot time. http://marc.info/?l=linux-kernel&m=120496222629983&w=2 Signed-off-by: Zhang Rui<rui.zhang@intel.com> --- drivers/acpi/thermal.c | 16 ++++++++++++---- 1 file changed, 12 insertions(+), 4 deletions(-) Index: linux-2.6/drivers/acpi/thermal.c =================================================================== --- linux-2.6.orig/drivers/acpi/thermal.c +++ linux-2.6/drivers/acpi/thermal.c @@ -401,7 +401,8 @@ static int acpi_thermal_trips_update(str } /* Passive (optional) */ - if (flag & ACPI_TRIPS_PASSIVE) { + if (((flag & ACPI_TRIPS_PASSIVE) && tz->trips.passive.flags.valid) || + (flag == ACPI_TRIPS_INIT)) { valid = tz->trips.passive.flags.valid; if (psv == -1) { status = AE_SUPPORT; @@ -440,8 +441,11 @@ static int acpi_thermal_trips_update(str memset(&devices, 0, sizeof(struct acpi_handle_list)); status = acpi_evaluate_reference(tz->device->handle, "_PSL", NULL, &devices); - if (ACPI_FAILURE(status)) + if (ACPI_FAILURE(status)) { + printk(KERN_WARNING PREFIX + "Invalid passive threshold\n"); tz->trips.passive.flags.valid = 0; + } else tz->trips.passive.flags.valid = 1; @@ -465,7 +469,8 @@ static int acpi_thermal_trips_update(str if (act == -1) break; /* disable all active trip points */ - if (flag & ACPI_TRIPS_ACTIVE) { + if ((flag == ACPI_TRIPS_INIT) || ((flag & ACPI_TRIPS_ACTIVE) && + tz->trips.active[i].flags.valid)) { status = acpi_evaluate_integer(tz->device->handle, name, NULL, &tz->trips.active[i].temperature); if (ACPI_FAILURE(status)) { @@ -497,8 +502,11 @@ static int acpi_thermal_trips_update(str memset(&devices, 0, sizeof(struct acpi_handle_list)); status = acpi_evaluate_reference(tz->device->handle, name, NULL, &devices); - if (ACPI_FAILURE(status)) + if (ACPI_FAILURE(status)) { + printk(KERN_WARNING PREFIX + "Invalid active%d threshold\n", i); tz->trips.active[i].flags.valid = 0; + } else tz->trips.active[i].flags.valid = 1; ^ permalink raw reply [flat|nested] 18+ messages in thread
* Re: AE_ERROR, ACPI thermal trip point state changed 2008-11-19 22:20 ` Németh Márton @ 2008-11-19 23:22 ` Andi Kleen 2008-12-08 6:04 ` Németh Márton 0 siblings, 1 reply; 18+ messages in thread From: Andi Kleen @ 2008-11-19 23:22 UTC (permalink / raw) To: Németh Márton; +Cc: Andi Kleen, Zhang, Rui, linux-acpi, LKML, lenb On Wed, Nov 19, 2008 at 11:20:17PM +0100, Németh Márton wrote: > Hi, > > Andi Kleen wrote: > > Németh Márton <nm127@freemail.hu> writes: > >> As of 2.6.27-rc3 the patch is still not included in the mainstream. I > >> hope that this patch was not forgotten completely. > > > > It's already in Linus' tree, will be in rc4. > > I compiled and tried 2.6.28-rc5. In the dmesg I get the following message: > > [ 63.589603] ACPI Exception (thermal-0538): AE_ERROR, ACPI thermal trip point state changed > [ 63.589669] Please send acpidump to linux-acpi@vger.kernel.org > [ 63.589805] [20080926] > > The original patch still applies for 2.6.28-rc5 (with some offsets). This patch > is not included in 2.6.28-rc5, yet. The "AE_ERROR..." message does not appear > any more if I apply the patch. I attached this original patch for easier reference. Hmm sorry I must have confused it with some other patch back then. Anyways Len Brown is handling ACPI again now, so he'll have to sort it out. cc'ed (the original patch is on linux-acpi) -Andi -- To unsubscribe from this list: send the line "unsubscribe linux-acpi" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html ^ permalink raw reply [flat|nested] 18+ messages in thread
* Re: AE_ERROR, ACPI thermal trip point state changed 2008-11-19 23:22 ` Andi Kleen @ 2008-12-08 6:04 ` Németh Márton 2008-12-08 6:48 ` Zhang Rui 0 siblings, 1 reply; 18+ messages in thread From: Németh Márton @ 2008-12-08 6:04 UTC (permalink / raw) To: Andi Kleen; +Cc: Zhang, Rui, linux-acpi, LKML, lenb Andi Kleen wrote: > On Wed, Nov 19, 2008 at 11:20:17PM +0100, Németh Márton wrote: >> Hi, >> >> Andi Kleen wrote: >>> Németh Márton <nm127@freemail.hu> writes: >>>> As of 2.6.27-rc3 the patch is still not included in the mainstream. I >>>> hope that this patch was not forgotten completely. >>> It's already in Linus' tree, will be in rc4. >> I compiled and tried 2.6.28-rc5. In the dmesg I get the following message: >> >> [ 63.589603] ACPI Exception (thermal-0538): AE_ERROR, ACPI thermal trip point state changed >> [ 63.589669] Please send acpidump to linux-acpi@vger.kernel.org >> [ 63.589805] [20080926] >> >> The original patch still applies for 2.6.28-rc5 (with some offsets). This patch >> is not included in 2.6.28-rc5, yet. The "AE_ERROR..." message does not appear >> any more if I apply the patch. I attached this original patch for easier reference. > > Hmm sorry I must have confused it with some other patch back then. > Anyways Len Brown is handling ACPI again now, so he'll have to sort > it out. cc'ed (the original patch is on linux-acpi) This is just a status report about 2.6.28-rc7, nothing more. The AE_ERROR message is still in the dmesg. The patch still solves the problem. Regards, Márton Németh -- To unsubscribe from this list: send the line "unsubscribe linux-acpi" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html ^ permalink raw reply [flat|nested] 18+ messages in thread
* Re: AE_ERROR, ACPI thermal trip point state changed 2008-12-08 6:04 ` Németh Márton @ 2008-12-08 6:48 ` Zhang Rui 2008-12-08 6:59 ` Németh Márton 0 siblings, 1 reply; 18+ messages in thread From: Zhang Rui @ 2008-12-08 6:48 UTC (permalink / raw) To: Németh Márton Cc: Andi Kleen, linux-acpi@vger.kernel.org, LKML, lenb@kernel.org On Mon, 2008-12-08 at 14:04 +0800, Németh Márton wrote: > Andi Kleen wrote: > > On Wed, Nov 19, 2008 at 11:20:17PM +0100, Németh Márton wrote: > >> Hi, > >> > >> Andi Kleen wrote: > >>> Németh Márton <nm127@freemail.hu> writes: > >>>> As of 2.6.27-rc3 the patch is still not included in the mainstream. I > >>>> hope that this patch was not forgotten completely. > >>> It's already in Linus' tree, will be in rc4. > >> I compiled and tried 2.6.28-rc5. In the dmesg I get the following message: > >> > >> [ 63.589603] ACPI Exception (thermal-0538): AE_ERROR, ACPI thermal trip point state changed > >> [ 63.589669] Please send acpidump to linux-acpi@vger.kernel.org > >> [ 63.589805] [20080926] > >> > >> The original patch still applies for 2.6.28-rc5 (with some offsets). This patch > >> is not included in 2.6.28-rc5, yet. The "AE_ERROR..." message does not appear > >> any more if I apply the patch. I attached this original patch for easier reference. > > > > Hmm sorry I must have confused it with some other patch back then. > > Anyways Len Brown is handling ACPI again now, so he'll have to sort > > it out. cc'ed (the original patch is on linux-acpi) > > This is just a status report about 2.6.28-rc7, nothing more. The AE_ERROR > message is still in the dmesg. The patch still solves the problem. > do you mean this patch: http://marc.info/?l=linux-acpi&m=120522267418715&w=2 thanks, rui -- To unsubscribe from this list: send the line "unsubscribe linux-acpi" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html ^ permalink raw reply [flat|nested] 18+ messages in thread
* Re: AE_ERROR, ACPI thermal trip point state changed 2008-12-08 6:48 ` Zhang Rui @ 2008-12-08 6:59 ` Németh Márton 2009-01-05 6:22 ` Németh Márton 0 siblings, 1 reply; 18+ messages in thread From: Németh Márton @ 2008-12-08 6:59 UTC (permalink / raw) To: Zhang Rui; +Cc: Andi Kleen, linux-acpi@vger.kernel.org, LKML, lenb@kernel.org Zhang Rui wrote: > On Mon, 2008-12-08 at 14:04 +0800, Németh Márton wrote: >> Andi Kleen wrote: >>> On Wed, Nov 19, 2008 at 11:20:17PM +0100, Németh Márton wrote: >>>> Hi, >>>> >>>> Andi Kleen wrote: >>>>> Németh Márton <nm127@freemail.hu> writes: >>>>>> As of 2.6.27-rc3 the patch is still not included in the mainstream. I >>>>>> hope that this patch was not forgotten completely. >>>>> It's already in Linus' tree, will be in rc4. >>>> I compiled and tried 2.6.28-rc5. In the dmesg I get the following message: >>>> >>>> [ 63.589603] ACPI Exception (thermal-0538): AE_ERROR, ACPI thermal trip point state changed >>>> [ 63.589669] Please send acpidump to linux-acpi@vger.kernel.org >>>> [ 63.589805] [20080926] >>>> >>>> The original patch still applies for 2.6.28-rc5 (with some offsets). This patch >>>> is not included in 2.6.28-rc5, yet. The "AE_ERROR..." message does not appear >>>> any more if I apply the patch. I attached this original patch for easier reference. >>> Hmm sorry I must have confused it with some other patch back then. >>> Anyways Len Brown is handling ACPI again now, so he'll have to sort >>> it out. cc'ed (the original patch is on linux-acpi) >> This is just a status report about 2.6.28-rc7, nothing more. The AE_ERROR >> message is still in the dmesg. The patch still solves the problem. >> > do you mean this patch: > http://marc.info/?l=linux-acpi&m=120522267418715&w=2 Yes, exactly. Márton Németh -- To unsubscribe from this list: send the line "unsubscribe linux-acpi" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html ^ permalink raw reply [flat|nested] 18+ messages in thread
* Re: AE_ERROR, ACPI thermal trip point state changed 2008-12-08 6:59 ` Németh Márton @ 2009-01-05 6:22 ` Németh Márton 0 siblings, 0 replies; 18+ messages in thread From: Németh Márton @ 2009-01-05 6:22 UTC (permalink / raw) To: Zhang Rui; +Cc: Andi Kleen, linux-acpi@vger.kernel.org, LKML, lenb@kernel.org Németh Márton írta: > Zhang Rui wrote: >> On Mon, 2008-12-08 at 14:04 +0800, Németh Márton wrote: >>> Andi Kleen wrote: >>>> On Wed, Nov 19, 2008 at 11:20:17PM +0100, Németh Márton wrote: >>>>> Hi, >>>>> >>>>> Andi Kleen wrote: >>>>>> Németh Márton <nm127@freemail.hu> writes: >>>>>>> As of 2.6.27-rc3 the patch is still not included in the mainstream. I >>>>>>> hope that this patch was not forgotten completely. >>>>>> It's already in Linus' tree, will be in rc4. >>>>> I compiled and tried 2.6.28-rc5. In the dmesg I get the following message: >>>>> >>>>> [ 63.589603] ACPI Exception (thermal-0538): AE_ERROR, ACPI thermal trip point state changed >>>>> [ 63.589669] Please send acpidump to linux-acpi@vger.kernel.org >>>>> [ 63.589805] [20080926] >>>>> >>>>> The original patch still applies for 2.6.28-rc5 (with some offsets). This patch >>>>> is not included in 2.6.28-rc5, yet. The "AE_ERROR..." message does not appear >>>>> any more if I apply the patch. I attached this original patch for easier reference. >>>> Hmm sorry I must have confused it with some other patch back then. >>>> Anyways Len Brown is handling ACPI again now, so he'll have to sort >>>> it out. cc'ed (the original patch is on linux-acpi) >>> This is just a status report about 2.6.28-rc7, nothing more. The AE_ERROR >>> message is still in the dmesg. The patch still solves the problem. >>> >> do you mean this patch: >> http://marc.info/?l=linux-acpi&m=120522267418715&w=2 > > Yes, exactly. Status report: the mentioned patch is not yet included in 2.6.28. Regards, Márton Németh ^ permalink raw reply [flat|nested] 18+ messages in thread
* Re: AE_ERROR, ACPI thermal trip point state changed 2008-08-20 9:08 ` Németh Márton 2008-08-20 10:02 ` Andi Kleen @ 2009-01-15 21:56 ` Len Brown 1 sibling, 0 replies; 18+ messages in thread From: Len Brown @ 2009-01-15 21:56 UTC (permalink / raw) To: Németh Márton; +Cc: Zhang, Rui, linux-acpi, LKML [-- Attachment #1: Type: TEXT/PLAIN, Size: 2367 bytes --] On Wed, 20 Aug 2008, Németh Márton wrote: > Zhang, Rui wrote: > > On Sat, 2008-03-08 at 15:41 +0800, Németh Márton wrote: > >> Zhang, Rui wrote: > >>> On Fri, 2008-03-07 at 14:54 +0800, Németh Márton wrote: > >>>> Hi, > >>>> > >>>> I downloaded pmtools from > >>>> > >> http://www.kernel.org/pub/linux/kernel/people/lenb/acpi/utils/pmtools-20071116.tar.bz2 and > >>>> compiled: it created exactly the same result what my currently > >>>> installed acpidump Debian > >>>> package version 20071116-1. I think it is useless to send the same > >> log > >>>> again. > >>>> > >>>> After I boot the "Please send acpidump to > >> linux-acpi@vger.kernel.org" > >>>> message is already > >>>> there. So when I first get the prompt I checked for this message in > >>>> dmesg and executed > >>>> the given command. Here is my result: > >>>> > >>>> # cat /proc/acpi/thermal_zone/*/* > >>>> 0 - Active; 1 - Passive > >>>> <polling disabled> > >>>> state: ok > >>>> temperature: 42 C > >>>> critical (S5): 155 C > >>>> passive: 84 C: tc1=2 tc2=5 tsp=0 devices=CPU0 > >>>> active[0]: 70 C: devices= > >>>> # ls /proc/acpi/thermal_zone/*/* > >>>> /proc/acpi/thermal_zone/THRM/cooling_mode > >>>> /proc/acpi/thermal_zone/THRM/polling_frequency > >>>> /proc/acpi/thermal_zone/THRM/state > >>>> /proc/acpi/thermal_zone/THRM/temperature > >>>> /proc/acpi/thermal_zone/THRM/trip_points > >>>> > >>>> Maybe this is related to > >>>> http://bugzilla.kernel.org/show_bug.cgi?id=8544 ? > >>>> > >>> Hi, Németh, > >>> > >>> Please ignore the debug patch I sent and try this one. > >> I created both the dmesg logs: > >> > >> 1. Clevo-D410J-patch-debug-thermal2.txt: the patch-debug-thermal was > >> only > >> applied, (and added a missing "\n"). > >> > >> 2. Clevo-D410J-thermal-fix.txt: the thermal-fix patch was also > >> applied. > >> In this case the AE_ERROR message is not there any more on Clevo D410J > >> laptop. > >> > > Thanks for your help in debugging this. > > We will get the "thermal-fix" patch upstream soon. > > As of 2.6.27-rc3 the patch is still not included in the mainstream. I > hope that this patch was not forgotten completely. > > Márton Németh Apparently it was dropped. should have put the patch here: http://bugzilla.kernel.org/show_bug.cgi?id=8544 I'll do it now. thanks, -Len ^ permalink raw reply [flat|nested] 18+ messages in thread
end of thread, other threads:[~2009-01-15 21:57 UTC | newest]
Thread overview: 18+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
[not found] <47B328AA.1000800@freemail.hu>
2008-02-14 7:44 ` AE_ERROR, ACPI thermal trip point state changed Németh Márton
2008-03-06 7:01 ` Németh Márton
2008-03-05 22:49 ` Zhang, Rui
2008-03-06 8:05 ` Zhang, Rui
2008-03-07 6:54 ` Németh Márton
2008-03-07 7:19 ` Zhang, Rui
2008-03-07 7:24 ` Zhang, Rui
2008-03-08 7:41 ` Németh Márton
2008-03-10 1:52 ` Zhang, Rui
2008-08-20 9:08 ` Németh Márton
2008-08-20 10:02 ` Andi Kleen
2008-11-19 22:20 ` Németh Márton
2008-11-19 23:22 ` Andi Kleen
2008-12-08 6:04 ` Németh Márton
2008-12-08 6:48 ` Zhang Rui
2008-12-08 6:59 ` Németh Márton
2009-01-05 6:22 ` Németh Márton
2009-01-15 21:56 ` Len Brown
This is a public inbox, see mirroring instructions for how to clone and mirror all data and code used for this inbox; as well as URLs for NNTP newsgroup(s).