From: Tim Gardner <timg@tpi.com>
To: Mattia Dongili <malattia@linux.it>
Cc: linux-acpi@vger.kernel.org, linux-kernel@vger.kernel.org
Subject: Re: [PATCH] Sony laptop: Some Sony Vaia laptops do not enable wwan power by default.
Date: Thu, 23 Apr 2009 10:41:25 -0600 [thread overview]
Message-ID: <49F09A35.6070304@tpi.com> (raw)
In-Reply-To: <20090423090454.GB24761@kamineko.org>
Mattia Dongili wrote:
> On Wed, Apr 22, 2009 at 12:53:51PM -0600, Tim Gardner wrote:
>> Mattia,
>>
>> Does this patch makes sense for just the Vaio? I've had positive feedback from
>> the tester in the bug report.
>>
>> rtg
>> -----------------
>> From 083972abb1d5e84845927b3925f077953c207b82 Mon Sep 17 00:00:00 2001
>> From: Tim Gardner <tim.gardner@canonical.com>
>> Date: Tue, 21 Apr 2009 11:09:10 -0600
>> Subject: [PATCH] Sony laptop: Some Sony Vaio laptops do not enable wwan power by default.
>>
>> Bug: https://bugs.launchpad.net/bugs/364678
>>
>> Added quirk to enable wwan power based on DMI information already present in the module.
>> It appears that wwan is not powered up from a cold boot.
>
> The bug reporter says that this happens when booting from windows to
> linux, is it still true when manually enabling the device in linux and
> then rebooting (into linux again)?
>
I can probably find out, though I'm not sure what impact it would have
on the driver. Does this laptop have a physical rfkill slider switch
from which you can somehow query initial state via ACPI or GPIO? If not,
then I assume the desired behavior is to just enable wwan and bluetooth
upon every boot ?
>> Signed-off-by: Tim Gardner <tim.gardner@canonical.com>
>> ---
>> drivers/misc/sony-laptop.c | 24 +++++++++++++++++++++++-
>> 1 files changed, 23 insertions(+), 1 deletions(-)
>>
>> diff --git a/drivers/misc/sony-laptop.c b/drivers/misc/sony-laptop.c
>> index 7e73acc..eab7011 100644
>> --- a/drivers/misc/sony-laptop.c
>> +++ b/drivers/misc/sony-laptop.c
>> @@ -1248,10 +1248,13 @@ struct device_ctrl {
>> u16 evport_offset;
>> u8 has_camera;
>> u8 has_bluetooth;
>> - u8 has_wwan;
>> struct sonypi_eventtypes *event_types;
>> };
>>
>> +struct sony_pic_quirk_entry {
>> + u8 set_wwan_power;
>> +};
>> +
>> struct sony_pic_dev {
>> struct device_ctrl *control;
>> struct acpi_device *acpi_dev;
>> @@ -1260,6 +1263,7 @@ struct sony_pic_dev {
>> struct list_head interrupts;
>> struct list_head ioports;
>> struct mutex lock;
>> + struct sony_pic_quirk_entry *quirks;
>> u8 camera_power;
>> u8 bluetooth_power;
>> u8 wwan_power;
>> @@ -2685,6 +2689,12 @@ static int sony_pic_add(struct acpi_device *device)
>> if (result)
>> goto err_remove_pf;
>>
>> + if (spic_dev.quirks && spic_dev.quirks->set_wwan_power) {
>> + /*
>> + * Power isn't enabled by default.
>> + */
>> + sony_pic_set_wwanpower(1);
>> + }
>> return 0;
>>
>> err_remove_pf:
>> @@ -2755,6 +2765,16 @@ static struct acpi_driver sony_pic_driver = {
>> },
>> };
>>
>> +static struct sony_pic_quirk_entry sony_pic_vaio_vgn = {
>> + .set_wwan_power = 1,
>> +};
>> +
>> +static int dmi_matched(const struct dmi_system_id *dmi)
>> +{
>> + spic_dev.quirks = dmi->driver_data;
>> + return 0;
>> +}
>> +
>> static struct dmi_system_id __initdata sonypi_dmi_table[] = {
>> {
>> .ident = "Sony Vaio",
>> @@ -2769,6 +2789,8 @@ static struct dmi_system_id __initdata sonypi_dmi_table[] = {
>> DMI_MATCH(DMI_SYS_VENDOR, "Sony Corporation"),
>> DMI_MATCH(DMI_PRODUCT_NAME, "VGN-"),
>> },
>> + .callback = dmi_matched,
>> + .driver_data = &sony_pic_vaio_vgn,
>
> This is like just enabling it on all type3 (and some type2) vaios.
> Might as well call your quirk unconditionally for all models.
>
> Honestly I'd rather work towards the rfkill implementation as Matthew
> suggests.
Agreed.
rtg
--
Tim Gardner timg@tpi.com www.tpi.com
OR 503-601-0234 x102 MT 406-443-5357
prev parent reply other threads:[~2009-04-23 16:41 UTC|newest]
Thread overview: 7+ messages / expand[flat|nested] mbox.gz Atom feed top
2009-04-22 18:53 [PATCH] Sony laptop: Some Sony Vaia laptops do not enable wwan power by default Tim Gardner
2009-04-22 19:50 ` Matthew Garrett
2009-04-22 20:07 ` Tim Gardner
2009-04-22 20:11 ` Matthew Garrett
2009-04-23 8:50 ` Mattia Dongili
2009-04-23 9:04 ` Mattia Dongili
2009-04-23 16:41 ` Tim Gardner [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=49F09A35.6070304@tpi.com \
--to=timg@tpi.com \
--cc=linux-acpi@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=malattia@linux.it \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).